| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
| |
Add AHCI support in u-boot, enable the sata disk controllers which
following the AHCI protocol.
Signed-off-by:Jason Jin<jason.jin@freescale.com>
|
|
|
|
| |
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
|
| |
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
|
|
|
|
|
|
|
|
| |
When tftp a non-exist file from the tftp server, u-boot will check
the link of all eth port. The original file will return wrong link
state on the no link ports.
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
|
|
|
|
|
|
|
|
| |
During the pci scan process, Some devices return bar_reponse with the
highest bytes 0, such as the pci bridge in uli1575 return bar_response
with 0xffffff, So the bar_size should be manually set under 64K.
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
| |
|
| |
|
|\ |
|
| |
| |
| |
| | |
Some more NAND cleanup and small fixes.
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
- Add Intel legacy lock/unlock support to common CFI driver
On some Intel flash's (e.g. Intel J3) legacy unlocking is
supported, meaning that unlocking of one sector will unlock
all sectors of this bank. Using this feature, unlocking
of all sectors upon startup (via env var "unlock=yes") will
get much faster.
- Fixed problem with multiple reads of envronment variable
"unlock" as pointed out by Reinhard Arlt & Anders Larsen.
- Removed unwanted linefeeds from "protect" command when
CFG_FLASH_PROTECTION is enabled.
- Changed p3p400 board to use CFG_FLASH_PROTECTION
Patch by Stefan Roese, 01 Apr 2006
* Changes/fixes for drivers/cfi_flash.c:
- Correctly handle the cases where CFG_HZ != 1000 (several
XScale-based boards)
- Fix the timeout calculation of buffered writes (off by a
factor of 1000)
Patch by Anders Larsen, 31 Mar 2006
|
|/ |
|
|
|
|
| |
Patch by Murray Jensen, 08 Jul 2005
|
| |
|
|\ |
|
| |
| |
| |
| |
| |
| | |
We need to adjust the bus number we are trying to access based
on which PCI controller its on
Patch by Kumar Gala 12 Jan 2006
|
| |
| |
| |
| | |
Patch by Kumar Gala 11 Jan 2006
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.
If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
|
| |
| |
| |
| | |
Patch by Andy Fleming, 14 Jun 2005
|
| |
| |
| |
| | |
Patch by Gerhard Jaeger, 21 Jun 2005
|
| |
| |
| |
| |
| |
| |
| | |
- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:
|
| |
| |
| |
| | |
Patch by Greg Ungerer, 04 Jun 2005
|
| |
| |
| |
| | |
Patch by Greg Ungerer, 21 May 2005
|
| | |
|
| | |
|
|\ \
| | |
| | |
| | | |
Code cleanup.
|
| | | |
|
| |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
|
| | | |
| | | |
| | | |
| | | | |
Patch by Stefan Roese, 1 Mar 2006
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
* Add env-variable "unlock" to handle initial state of sectors
(locked/unlocked).
Only the U-Boot image and it's environment is protected,
all other sectors are unprotected (unlocked) if flash
hardware protection is used (CFG_FLASH_PROTECTION) and
the environment variable "unlock" is set to "yes".
Patch by Stefan Roese, 28 Feb 2006
* Update drivers/cfi_flash.c:
- find_sector() called in both versions of flash_write_cfiword()
Patch by Peter Pearse, 27th Feb 2006
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
Patch by Jose Maria Lopez, 16 Jan 2006
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
* Changes/fixes for drivers/cfi_flash.c:
We *should* check if there are any error bits if the previous call
returned ERR_OK (Otherwise we will have output an error message in
flash_status_check() already.) The original code would only check for
error bits if flash_status_check() returns ERR_TIMEOUT.
Patch by Marcus Hall, 23 Aug 2005
* Changes/fixes for drivers/cfi_flash.c:
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
Patch by Sangmoon Kim, 19 Aug 2005
* Fixes for drivers/cfi_flash.c:
- Fix wrong timeout value usage in flash_status_check()
- Round write_tout up when converting to msec in flash_get_size()
- Remove clearing flash status at the end of flash_write_cfibuffer()
which sets Intel 28F640J3 flash back to command mode on CSB472
Patch by Tolunay Orkun, 02 July 2005
|
| | | |
| | | |
| | | |
| | | | |
Controller.
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
|
|\ \ \ \
| | |/ /
| |/| |
| | | | |
This is a first version of the testing-NAND branch merged back to main.
|
| |\ \ \
| | |/ /
| |/| | |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Patch by Mike Rapoport, 01 Nov 2005
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
| | | |
| | | |
| | | |
| | | | |
Patch by Ladislav Michl, 13 Sep 2005
|
| | |\ \ |
|
| | | | |
| | | | |
| | | | |
| | | | | |
Patch by Ladislav Michl, 29 Jun 2005
|
|/ / / /
| | | |
| | | |
| | | | |
Register Definitions.
|
| |_|/
|/| |
| | |
| | |
| | |
| | | |
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
|
| | | |
|
| | | |
|
|\ \ \ |
|
| | | | |
|
| | | | |
|
|\ \ \ \
| |/ / /
|/| | | |
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Patch by Art Shipkowski, 12 May 2005
Cleanup.
|