summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}Mike Frysinger2009-02-02-5/+11
| | | | | | | | Rather than having the on-chip MAC hardcoded to phy address 1 and a speed of 2.5mhz, use these as defaults if the board doesn't specify otherwise. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: cleanup MII/PHY functionsMike Frysinger2009-02-02-175/+134
| | | | | | | | Cleanup and rewrite the MII/PHY related functions so that we can reuse the existing common linux/miiphy.h code and hook into the `mii` command. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: set MDCDIV based on SCLKMike Frysinger2009-02-02-5/+5
| | | | | | | | Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK), use the real algorithm so it gets set correctly regardless of SCLK. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-02-01-0/+937
|\
| * OMAP3: Add I2C supportDirk Behme2009-01-24-0/+24
| | | | | | | | | | | | Add I2C support. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * OMAP3: Add MMC supportDirk Behme2009-01-24-0/+559
| | | | | | | | | | | | Add MMC support. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * OMAP3: Add NAND supportDirk Behme2009-01-24-0/+354
| | | | | | | | | | | | | | | | Add NAND support. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Syed Mohammed Khasim <khasim@ti.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-02-01-173/+369
|\ \
| * | AVR32: macb - Search for PHY idGunnar Rangoy2009-01-28-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for searching through available PHY-addresses in the macb-driver. This is needed for the ATEVK1100 evaluation board, where the PHY-address will be initialized to either 1 or 7. This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when enabled tells the driver to search for the PHY address. Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com> Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com> Signed-off-by: Olav Morken <olavmrk@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | Marvell 88E1118 interrupt fixRon Madrid2009-01-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: smc911x.c: Add LAN9211 to chip_ids[] arrayStefan Roese2009-01-28-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: Sort Makefile labelsMichal Simek2009-01-28-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | sh: sh_eth: Change new network APINobuhiro Iwamatsu2009-01-24-134/+231
| | | | | | | | | | | | | | | | | | | | | sh_eth used old network API. This patch changed new API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: smc911x: Make register read/write functions weakStefan Roese2009-01-24-37/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the reg_read/_write to smc911x_reg_read/_write and defines then as weak so that they can be overridden by board specific version. This will be used by the upcoming VCTH board support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | powerpc: net: support for the SMSC LAN8700 PHYHeiko Schocher2009-01-24-0/+59
| |/ | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | ixp: move serial to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+126
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | ixp: move pci drivers to drivers/pciJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+572
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-01-28-0/+2903
|\ \
| * | USB: Add dcache support to the EHCI driverStefan Roese2009-01-28-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds routines to handle (flush/invalidate) the dcache for the QH and qTD structures and data buffers. This is needed on platforms using this EHCI support with dcache enabled (like the MIPS VCT board port). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Add EHCI support for VCT EHCI controllerStefan Roese2009-01-28-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Add config option to call ehci_hcd_init() again after EHCI resetStefan Roese2009-01-28-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET to call ehci_hcd_init() again after ehci_reset() is executed. This is needed for the upcoming VCT EHCI support which needs to re-init the hcd part again after the EHCI CMD_RESET is executed. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Fix speed detection on EHCI cntr with root hub transaction translatorsStefan Roese2009-01-28-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue that the speed of USB devices was not detected correctly on some EHCI controllers. This will be used on the upcoming VCT EHCI support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | usb : musb : Adding DM6446 (TI DaVinci) platform specific USB supportThomas Abraham2009-01-28-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding DM6446 (TI DaVinci) platform specific USB functionality for USB Phy and VBUS initialization. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | usb : musb : Adding host controller driver for Mentor USB controllerThomas Abraham2009-01-28-0/+1302
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding Mentor USB core functionality and Mentor USB Host controller functionality for Mentor USB OTG controller (musbhdrc). Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB ehci ixp4xx supportMichael Trimarchi2009-01-28-0/+50
| | | | | | | | | | | | | | | | | | | | | Add USB ehci ixp4xx host controller. Test on ixdp465 board. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB ehci remove infinite loop and use handshake functionMichael Trimarchi2009-01-28-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | USB ehci code cleanup. Use handshake instead of infinite while loop to check the STD_ASS status Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | Add initial support for USB ehci pciMichael Trimarchi2009-01-28-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | Add USB ehci pci support. This patch doesn't include any pci_ids and it is not tested on real hardware. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | EHCI fix code and ixp4xx test.Remy Böhmer2009-01-28-72/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB ehci configuration parameter: #define CONFIG_CMD_USB 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_IXP4XX 1 #define CONFIG_EHCI_IS_TDI 1 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #define CONFIG_LEGACY_USB_INIT_SEQ 1 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found => usb tree Device Tree: 1 Hub (1.5MBit/s, 0mA) | u-boot EHCI Host Controller | |+-2 Mass Storage (12MBit/s, 100mA) Sony Storage Media 0C07040930296 => Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | [PATCH] This patch add varius fix to the ehci.michael2009-01-28-44/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix ehci_readl, ehci_writel - introduce new define in ehci.h - introduce the handshake function for waiting on a register - fix usb_ehci_fsl with the new HC_LENGTH macro Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | [PATCH] Fix EHCI usb. I start to test on amichael2009-01-28-161/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IXP465 board and I find some errors in the code. This patch fix: - descriptor initizialization (config, interface and endpoint must be one next-to the other when the USB_DT_CONFIG message is send. - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN and the CONFIG_EHCI_MMIO_BIG_ENDIAN) - Introduce the linux version of the usb_config_descriptor and usb_interface descriptor. This descriptor does't contains u-boot extension. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | USB ehci freescale supportMichael Trimarchi2009-01-28-0/+186
| | | | | | | | | | | | | | | | | | | | | Add USB ehci freescale support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | USB ehci core supportMichael Trimarchi2009-01-28-0/+785
| | | | | | | | | | | | | | | | | | | | | Add USB ehci core support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
* | | Blackfin: overhaul i2c driverMike Frysinger2009-01-28-0/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Blackfin i2c driver does not work properly with certain devices due to it breaking up transfers incorrectly. This is a rewrite of the driver and relocates it to the newer place in the source tree. Also remove duplicated I2C speed defines in Blackfin board configs and disable I2C slave address usage since it isn't implemented. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | Blackfin: bfin_mac: update port muxingMike Frysinger2009-01-28-12/+35
|/ / | | | | | | | | | | Adds support more Blackfin parts and fixes broken muxing for older ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Command usage cleanupPeter Tyser2009-01-28-3/+3
| | | | | | | | | | | | | | | | Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | Standardize command usage messages with cmd_usage()Peter Tyser2009-01-28-5/+5
| | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | soft_i2c.c add option for repeated start in i2c_read()Andrew Dyer2009-01-27-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a #define to optionally change the behaviour of i2c_read() in soft_i2c.c to send an I2C repeated start instead of a stop-start between sending the device address pointer write and reading back the data. The current behaviour is retained as the default. While most devices will work either way, I have a smart battery(*) that requires repeated start, and someone at some point found a device that required a stop-start. (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
* | drivers/net/e1000.c: missing terminator for supported devicesStefan Althoefer2009-01-27-0/+1
| | | | | | | | Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
* | CFI: Add geometry reversal for STMicro M29W320ETRichard Retanubun2009-01-26-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip. Modeled after flash_fixup_amd, this patch handles the geometry reversal or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash. Since I cannot test all STM's chips, the detection is implemented as narrow as possible for now. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | CFI: increase performance of function find_sector()Jens Gehrlein2009-01-26-7/+16
| | | | | | | | | | | | | | Tested on TQM5200S-BD with Samsung K8P2815UQB Signed-off-by: Jens Gehrlein <sew_s@tqs.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | CFI: avoid redundant function call in single word programming modeJens Gehrlein2009-01-26-3/+7
|/ | | | | | | | | The function find_sector() doesn't need to be called twice in the case of AMD command set. Tested on TQM5200S-BD with Samsung K8P2815UQB. Signed-off-by: Jens Gehrlein <sew_s@tqs.de> Signed-off-by: Stefan Roese <sr@denx.de>
* spi flash: fix crash due to spi flash miscommunicationBrad Bozarth2009-01-24-2/+4
| | | | | | | | | | | Higher spi flash layers expect to be given back a pointer that was malloced so that it can free the result, but the lower layers return a pointer that is in the middle of the malloced memory. Reorder the members of the lower spi structures so that things work out. Signed-off-by: Brad Bozarth <bflinux@yumbrad.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Add support for Maxim's DS4510 I2C devicePeter Tyser2009-01-24-0/+425
| | | | | | | | | | | | | Initial support for the DS4510, a CPU supervisor with integrated EEPROM, SRAM, and 4 programmable non-volatile GPIO pins. The CONFIG_DS4510 define enables support for the device while the CONFIG_CMD_DS4510 define enables the ds4510 command. The additional CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and CONFIG_DS4510_RST defines add additional sub-commands to the ds4510 command when defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* serial: Rename driver vcth to vct to support other board variantsStefan Roese2009-01-24-3/+7
| | | | | | | | | | | Moved driver vcth.c to vct.c to better reflect the VCT board series. This driver is now used by the VCT platforms: vct_premium vct_platinum vct_platinumsvc Signed-off-by: Stefan Roese <sr@denx.de>
* Added legacy flash ST Micro M29W040BNiklaus Giger2009-01-24-0/+14
|
* nand: fixup printf modifiers to match types usedMike Frysinger2009-01-23-6/+6
| | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPSWolfgang Grandegger2009-01-23-2/+2
| | | | | | | | | | | | | | | | This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: Enable nand lock, unlock featureNishanth Menon2009-01-23-36/+43
| | | | | | | | | | | | | | | | Enable nand lock, unlock and status of lock feature. Not every device and platform requires this, hence, it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK Nand unlock and status operate on block boundary instead of page boundary. Details in: http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT Intial solution provided by Vikram Pandita <vikram.pandita@ti.com> Includes preliminary suggestions from Scott Wood Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: move board_nand_init to nand.hMike Frysinger2009-01-23-2/+0
| | | | | | | | | | | Rather than putting the function prototype for board_nand_init() in the one place where it gets called, put it into nand.h so that every place that also defines it gets the prototype. Otherwise, errors can go silently unnoticed such as using the wrong return value (void rather than int) when defining the function. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* OneNAND: Additional sync with 2.6.27Stefan Roese2009-01-23-1/+71
| | | | | | | | | | | | - Add subpage write support - Add onenand_oob_64/32 ecclayout This has been missing and without it UBI has some incompatibilies issues with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is placed differently (2048 instead of 512) without this fix. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.1 at 2024-12-30 05:02:40 +0000