summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* cfi_flash: Fix typo in cfi_flash.cStefan Roese2009-02-05-2/+2
| | | | | | | | Patch "flash/cfi_flash: Use virtual sector start address, not phys" introduced a small typo and compilation warning for systems with CFI legacy support (e.g. hcu4). This patch fixes it. Signed-off-by: Stefan Roese <sr@denx.de>
* jedec_flash: Only use manufacturer defines from common flash.hStefan Roese2009-02-05-10/+6
| | | | | | | | | | | | | This patch removes the double defined manufacturer defines from jedec_flash.c. Since the common defines in flash.h are 32bit we now need the (16) cast. This patch also removes the compilation warning (e.g. seen on hcu5): ./MAKEALL hcu5 Configuring for hcu5 board... jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type Signed-off-by: Stefan Roese <sr@denx.de>
* cfi_flash: Silence compilation warningStefan Roese2009-02-05-1/+1
| | | | | | | Patch "flash/cfi_flash: Use virtual sector start address, not phys" introduced a small compilation warning. This patch fixes it. Signed-off-by: Stefan Roese <sr@denx.de>
* flash/cfi_flash: Use virtual sector start address, not physBecky Bruce2009-02-05-29/+24
| | | | | | | | | | | | | | | | | | | | | | | | include/flash.h was commented to say that the address in flash_info->start was a physical address. However, from u-boot's point of view, and looking at most flash code, it makes more sense for this to be a virtual address. So I corrected the comment to indicate that this was a virtual address. The only flash driver that was actually treating the address as physical was the mtd/cfi_flash driver. However, this code was using it inconsistently as it actually directly dereferenced the "start" element, while it used map_physmem to get a virtual address in other places. I changed this driver so that the code which initializes the info->start field calls map_physmem to get a virtual address, eliminating the need for further map_physmem calls. The code is now consistent. The *only* place a physical address should be used is when defining the flash banks list that is used to initialize the flash_info struct, usually found in the board config file. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-02-03-0/+58
|\
| * USB: Add EHCI support for VCT EHCI controller (really with driver now)Stefan Roese2009-02-02-0/+58
| | | | | | | | | | | | | | | | Somehow I missed the real driver part in my last patch version. This patch now adds the driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | Blackfin: add driver for on-chip MMC/SD controllerCliff Cai2009-02-02-0/+606
| | | | | | | | | | | | | | This is a port of the Linux Blackfin on-chip SDH driver to U-Boot. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Blackfin: add driver for on-chip ATAPI controllerSonic Zhang2009-02-02-0/+1375
| | | | | | | | | | | | | | This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot. Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Blackfin: add driver for on-chip NAND controllerMike Frysinger2009-02-02-0/+386
| | | | | | | | | | | | This is a port of the Linux Blackfin on-chip NFC driver to U-Boot. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Blackfin: add driver for on-chip SPI controllerMike Frysinger2009-02-02-0/+344
| | | | | | | | | | | | This fills out the SPI backend for the Blackfin on-chip SPI peripheral. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Blackfin: bfin_mac: cleanup pointer/casts for aliasing issuesMike Frysinger2009-02-02-46/+34
| | | | | | | | | | | | | | | | Redo how pointers are managed to get rid of ugly casts and strict pointer aliasing issues that are highlighted by gcc 4.3. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMIIMike Frysinger2009-02-02-2/+2
| | | | | | | | | | | | | | | | No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that does exactly the same thing as common "CONFIG_RMII". Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: use common debug()Mike Frysinger2009-02-02-11/+3
| | | | | | | | | | | | | | Rather then defining our own DEBUGF(), just use the common debug(). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}Mike Frysinger2009-02-02-5/+11
| | | | | | | | | | | | | | | | Rather than having the on-chip MAC hardcoded to phy address 1 and a speed of 2.5mhz, use these as defaults if the board doesn't specify otherwise. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: cleanup MII/PHY functionsMike Frysinger2009-02-02-175/+134
| | | | | | | | | | | | | | | | Cleanup and rewrite the MII/PHY related functions so that we can reuse the existing common linux/miiphy.h code and hook into the `mii` command. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: set MDCDIV based on SCLKMike Frysinger2009-02-02-5/+5
|/ | | | | | | | Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK), use the real algorithm so it gets set correctly regardless of SCLK. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-02-01-0/+937
|\
| * OMAP3: Add I2C supportDirk Behme2009-01-24-0/+24
| | | | | | | | | | | | Add I2C support. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * OMAP3: Add MMC supportDirk Behme2009-01-24-0/+559
| | | | | | | | | | | | Add MMC support. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * OMAP3: Add NAND supportDirk Behme2009-01-24-0/+354
| | | | | | | | | | | | | | | | Add NAND support. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Syed Mohammed Khasim <khasim@ti.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-02-01-173/+369
|\ \
| * | AVR32: macb - Search for PHY idGunnar Rangoy2009-01-28-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for searching through available PHY-addresses in the macb-driver. This is needed for the ATEVK1100 evaluation board, where the PHY-address will be initialized to either 1 or 7. This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when enabled tells the driver to search for the PHY address. Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com> Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com> Signed-off-by: Olav Morken <olavmrk@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | Marvell 88E1118 interrupt fixRon Madrid2009-01-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: smc911x.c: Add LAN9211 to chip_ids[] arrayStefan Roese2009-01-28-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: Sort Makefile labelsMichal Simek2009-01-28-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | sh: sh_eth: Change new network APINobuhiro Iwamatsu2009-01-24-134/+231
| | | | | | | | | | | | | | | | | | | | | sh_eth used old network API. This patch changed new API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: smc911x: Make register read/write functions weakStefan Roese2009-01-24-37/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the reg_read/_write to smc911x_reg_read/_write and defines then as weak so that they can be overridden by board specific version. This will be used by the upcoming VCTH board support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | powerpc: net: support for the SMSC LAN8700 PHYHeiko Schocher2009-01-24-0/+59
| |/ | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | ixp: move serial to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+126
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | ixp: move pci drivers to drivers/pciJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+572
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-01-28-0/+2903
|\ \
| * | USB: Add dcache support to the EHCI driverStefan Roese2009-01-28-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds routines to handle (flush/invalidate) the dcache for the QH and qTD structures and data buffers. This is needed on platforms using this EHCI support with dcache enabled (like the MIPS VCT board port). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Add EHCI support for VCT EHCI controllerStefan Roese2009-01-28-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Add config option to call ehci_hcd_init() again after EHCI resetStefan Roese2009-01-28-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET to call ehci_hcd_init() again after ehci_reset() is executed. This is needed for the upcoming VCT EHCI support which needs to re-init the hcd part again after the EHCI CMD_RESET is executed. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB: Fix speed detection on EHCI cntr with root hub transaction translatorsStefan Roese2009-01-28-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue that the speed of USB devices was not detected correctly on some EHCI controllers. This will be used on the upcoming VCT EHCI support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | usb : musb : Adding DM6446 (TI DaVinci) platform specific USB supportThomas Abraham2009-01-28-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding DM6446 (TI DaVinci) platform specific USB functionality for USB Phy and VBUS initialization. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | usb : musb : Adding host controller driver for Mentor USB controllerThomas Abraham2009-01-28-0/+1302
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding Mentor USB core functionality and Mentor USB Host controller functionality for Mentor USB OTG controller (musbhdrc). Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB ehci ixp4xx supportMichael Trimarchi2009-01-28-0/+50
| | | | | | | | | | | | | | | | | | | | | Add USB ehci ixp4xx host controller. Test on ixdp465 board. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | USB ehci remove infinite loop and use handshake functionMichael Trimarchi2009-01-28-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | USB ehci code cleanup. Use handshake instead of infinite while loop to check the STD_ASS status Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | Add initial support for USB ehci pciMichael Trimarchi2009-01-28-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | Add USB ehci pci support. This patch doesn't include any pci_ids and it is not tested on real hardware. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | EHCI fix code and ixp4xx test.Remy Böhmer2009-01-28-72/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB ehci configuration parameter: #define CONFIG_CMD_USB 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_IXP4XX 1 #define CONFIG_EHCI_IS_TDI 1 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #define CONFIG_LEGACY_USB_INIT_SEQ 1 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found => usb tree Device Tree: 1 Hub (1.5MBit/s, 0mA) | u-boot EHCI Host Controller | |+-2 Mass Storage (12MBit/s, 100mA) Sony Storage Media 0C07040930296 => Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | [PATCH] This patch add varius fix to the ehci.michael2009-01-28-44/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix ehci_readl, ehci_writel - introduce new define in ehci.h - introduce the handshake function for waiting on a register - fix usb_ehci_fsl with the new HC_LENGTH macro Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | [PATCH] Fix EHCI usb. I start to test on amichael2009-01-28-161/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IXP465 board and I find some errors in the code. This patch fix: - descriptor initizialization (config, interface and endpoint must be one next-to the other when the USB_DT_CONFIG message is send. - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN and the CONFIG_EHCI_MMIO_BIG_ENDIAN) - Introduce the linux version of the usb_config_descriptor and usb_interface descriptor. This descriptor does't contains u-boot extension. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | USB ehci freescale supportMichael Trimarchi2009-01-28-0/+186
| | | | | | | | | | | | | | | | | | | | | Add USB ehci freescale support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| * | USB ehci core supportMichael Trimarchi2009-01-28-0/+785
| | | | | | | | | | | | | | | | | | | | | Add USB ehci core support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
* | | Blackfin: overhaul i2c driverMike Frysinger2009-01-28-0/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Blackfin i2c driver does not work properly with certain devices due to it breaking up transfers incorrectly. This is a rewrite of the driver and relocates it to the newer place in the source tree. Also remove duplicated I2C speed defines in Blackfin board configs and disable I2C slave address usage since it isn't implemented. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | Blackfin: bfin_mac: update port muxingMike Frysinger2009-01-28-12/+35
|/ / | | | | | | | | | | Adds support more Blackfin parts and fixes broken muxing for older ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Command usage cleanupPeter Tyser2009-01-28-3/+3
| | | | | | | | | | | | | | | | Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | Standardize command usage messages with cmd_usage()Peter Tyser2009-01-28-5/+5
| | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | soft_i2c.c add option for repeated start in i2c_read()Andrew Dyer2009-01-27-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a #define to optionally change the behaviour of i2c_read() in soft_i2c.c to send an I2C repeated start instead of a stop-start between sending the device address pointer write and reading back the data. The current behaviour is retained as the default. While most devices will work either way, I have a smart battery(*) that requires repeated start, and someone at some point found a device that required a stop-start. (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
generated by cgit v1.1 at 2024-11-17 18:27:56 +0000