summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* ColdFire: Fix UART baudrate formulaTsiChung Liew2008-07-11-2/+2
| | | | | | | | | | The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32" can generate the wrong divisor due to integer division truncation. Round the calculated divisor value by adding 1/2 the baudrate before dividing by the baudrate. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
* Fix some more print() format errors.Wolfgang Denk2008-07-11-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* silence misc printf formatting compiler warningsKim Phillips2008-07-10-4/+4
| | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-07-10-15/+6
|\
| * fix USB devices with multiple configurationsHarald Welte2008-07-10-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bugs in usbdcore*.c related to the use of devices with multiple configurations. The original code made mistakes about the meaning of configuration value and configuration index, and the resulting off-by-one errors resulted in: * SET_CONFIGURATION always selected the first configuration, no matter what wValue is being passed. * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first configuration (index 0). Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Markus Klotzbuecher <mk@denx.de>
* | Fix some more print() format errors.Wolfgang Denk2008-07-10-3/+3
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* MTD/NAND: Fix printf format warning in nand codeStefan Roese2008-07-10-4/+4
| | | | | | | | | This patch fixes NAND related printf format warning. Those warnings are now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: Stefan Roese <sr@denx.de>
* rtc: Fix printf format warning in m41t60.cStefan Roese2008-07-10-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* pci: Move PCI device configuration check into a separate weak functionStefan Roese2008-07-10-24/+46
| | | | | | | | | | | This patch moves the check, if a device should be skipped in PCI PNP configuration into the function pci_skip_dev(). This function is defined as weak so that it can be overwritten by a platform specific one if needed. The check if the device should get printed in the PCI summary upon bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function pci_print_dev() which is also defined as weak too. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flashWolfgang Denk2008-07-10-85/+123
|\
| * NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.Scott Wood2008-07-09-85/+123
| | | | | | | | | | | | | | | | | | This is particularly problematic now that non-NAND-specific code is including <nand.h>, and thus all debugging code is being compiled regardless of whether it was requested, as reported by Scott McNutt <smcnutt@psyent.com>. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | e1000: add support for 82545GM 64bit PCI-X copper variantPaul Gortmaker2008-07-10-1/+4
| | | | | | | | | | | | | | This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Round the serial port clock divisor value returned by calc_divisor()Hugo Villeneuve2008-07-10-1/+6
| | | | | | | | | | | | | | | | Round the serial port clock divisor value returned by calc_divisor(). Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: John Roberts <john.roberts@pwav.com>
* | mmc: Move atmel_mci driver into drivers/mmcHaavard Skinnemoen2008-07-10-0/+751
| | | | | | | | | | | | | | This makes it easier to use the driver on other platforms. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Create drivers/mmc subdirectoryHaavard Skinnemoen2008-07-10-0/+44
| | | | | | | | | | | | | | | | In order to consolidate more of the various MMC drivers around the tree, we must first have a common place to put them. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flashWolfgang Denk2008-07-09-1/+1
|\ \
| * | jedec_flash: Fix AM29DL800BB device IDStefan Roese2008-07-08-1/+1
| |/ | | | | | | | | | | | | | | As pointed out by Jerry Hicks, this patch corrects the device ID of the Spansion AM29DL800BB NOR device. Verified against latest Spansion datasheet (rev C4 from Dezember 2006). Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2008-07-09-63/+1102
|\ \ | |/ |/|
| * Remove duplicate definitions in include/lxt971a.h.Hugo Villeneuve2008-07-06-54/+47
| | | | | | | | | | | | | | | | | | | | | | Remove duplicate definitions in include/lxt971a.h. Remove duplicate registers and bits definitions in include/lxt971a.h for standard MII registers, and use values in include/miiphy.h instead. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: sh: Renesas SH7763 Ethernet device supportNobuhiro Iwamatsu2008-07-06-0/+1050
| | | | | | | | | | | | | | | | | | Renesas SH7763 has 2 channel Ethernet device. This is 10/100/1000 Base support. But this patch check 10/100 Base only. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: ne2000: Move dev_addr variable from grobal to local.Nobuhiro Iwamatsu2008-07-06-2/+1
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: ne2000: Fix compile error of NE2000Nobuhiro Iwamatsu2008-07-06-7/+4
| | | | | | | | | | | | | | If enable DEBUG, can not compile ne2000 driver. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | net: smc911x: Fix typoNobuhiro Iwamatsu2008-07-07-1/+1
| | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
* | net: fix compile problem in smc911x driver.Nobuhiro Iwamatsu2008-07-07-2/+2
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | Move conditional compilation of MPC8XXX SPI driver to MakefileBen Warren2008-07-01-3/+1
| | | | | | | | Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | sata: wait for device updating signature to hostDave Liu2008-06-30-0/+8
| | | | | | | | | | | | | | | | The driver need wait for the device updating signature to host. If we don't wait for it, the driver can not detect the device(disk) when the system powers up. Signed-off-by: Dave Liu <daveliu@freescale.com>
* | serial_pl010.c: add watchdog supportStuart Wood2008-06-29-2/+6
| | | | | | | | Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
* | Add sata sil3114 supportTor Krill2008-06-29-0/+987
| | | | | | | | Signed-off-by: Tor Krill <tor@excito.com>
* | pcmcia/ti_pci1410a: Move compile condition to the MakefileJean-Christophe PLAGNIOL-VILLARD2008-06-26-3/+3
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | pxa_pcmcia: Move compile condition to the MakefileJean-Christophe PLAGNIOL-VILLARD2008-06-26-5/+1
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | marabun_pcmcia: Move compile condition to the MakefileJean-Christophe PLAGNIOL-VILLARD2008-06-26-5/+4
|/ | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* cfi-flash: Fix problem in flash_toggle(), busy was not detected reliablyStefan Roese2008-06-19-8/+4
| | | | | | | | | | | | | This patch simplifies flash_toggle() (AMD commandset), which is used to detect if a FLASH device is still busy with erase/program operations. On 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation did not detect the busy state reliably, resulting in non erased sectors etc. This patch now simplifies this function by "just" comparing the complete data-word instead of ANDing it with the command-word (0x40) before the compatison. It is done the same way in the Linux implementation chip_ready() in cfi_cmdset_0002.c. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-shWolfgang Denk2008-06-11-55/+73
|\
| * sh: SH7763 SCIF supportNobuhiro Iwamatsu2008-06-09-55/+73
| | | | | | | | | | | | | | | | SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution, but only SCIF2 is different. This patch work all SCIF channel. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2008-06-11-14/+14
|\ \
| * | [MIPS] Update <asm/addrspace.h> headerShinya Kuribayashi2008-06-05-14/+14
| |/ | | | | | | | | | | | | - Fix traditional KSEG names - Replace PHYSADDR with CPHYSADDR Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-fdtWolfgang Denk2008-06-11-14/+19
|\ \
| * | Convert mpc7448hpc2 to CONFIG_OF_LIBFDTGerald Van Baren2008-06-09-14/+19
| |/ | | | | | | | | | | | | | | | | | | | | | | | | This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change to CONFIG_OF_LIBFDT. WARNING: This conversion is untested because I do not have a board to test it on. NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally) /aliases/ethernet1 property for the ethernet to work. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flashWolfgang Denk2008-06-11-7/+34
|\ \
| * | cfi_flash: enable M18 flash chips family support.Vasiliy Leoenenko2008-06-03-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | Added new command set ID. Buffered write command processing is changed in order to support M18 flash chips family. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
| * | cfi_flash: support of long cmd in U-boot.Vasiliy Leoenenko2008-06-03-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some NOR flash chips needs support of commands with length grether than max value size of uchar. For example all M18 family chips use 0x1ff command in buffered write mode as value of program loops count. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2008-06-11-330/+361
|\ \ \
| * | | net: Conditional COBJS inclusion of network driversShinya Kuribayashi2008-06-09-201/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace COBJS-y with appropriate driver config names. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | Merge branch 'master' of git://git.denx.de/u-bootBen Warren2008-06-08-63/+1302
| |\ \ \ | | | |/ | | |/|
| * | | DM9000 fix status check fail 0x6d error for trizeps boardRemy Bohmer2008-06-05-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the Application Notes of the DM9000, only the 2 bits 0:1 of the status byte need to be checked to identify a valid packet in the fifo But, The several different Application Notes do not all speak the same language on these bits. They do not disagree, but only 1 Application Note noted explicitly that only these 2 bits need to be checked. Even the datasheets do not mention anything about these 2 bits. Because the old code, and the kernel check the whole byte, I left this piece untouched. However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so it should work. Notice, that the 2nd iteration through this receive loop (when a 2nd packet is in the fifo) is much shorter now, compared to the older U-boot driver code, so that we can maybe run into a hardware condition now that was never seen before, or maybe was seen very unfrequently. Additionaly added a cleanup of a stack variable. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | Fix order for reading rx-status registers in 32bit mode of DM9000Remy Bohmer2008-06-04-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A last minute cleanup before submitting the DM9000A patch series yesterday introduced a bug in reading the rx-status registers in 32bit mode only. This patch repairs this. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | DM9000: Some minor code cleanupsRemy Bohmer2008-06-04-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some lines of the U-boot DM9000x driver are longer than 80 characters, or need some other minor cleanup. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | DM9000: Make driver work properly for DM9000ARemy Bohmer2008-06-04-39/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DM9000A network controller does not work with the U-boot DM9000x driver. Analysis showed that many incoming packets are lost. The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to check for a valid rx packet be done on the interrupt status register, not directly by performing the dummy read and the rx status check as is currently the case in the u-boot driver. When the recommended poll is done as suggested the driver starts working correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there can be more than 1 package in the fifo at the same time. The driver must perform the rx-status check in a loop and read and handle all packages until there is no more left _after_ the interrupt RX flag is set. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | DM9000: Improve eth_reset() routineRemy Bohmer2008-06-04-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the reset procedure must be done twice to properly reset the DM9000 by means of software. This errata is not needed anymore for the DM9000A, but it does not bother it. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | DM9000: improve eth_send() routineRemy Bohmer2008-06-04-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eth_send routine of the U-boot DM9000x driver does not match the DM9000 or DM9000A application notes/programming guides. This change improves the stability of the DM9000A network controller. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit v1.1 at 2024-11-22 05:06:19 +0000