summaryrefslogtreecommitdiff
path: root/drivers/video
Commit message (Collapse)AuthorAgeLines
* dm: Use dev_get_addr() where possibleSimon Glass2015-08-31-2/+1
| | | | | | | | | | This is a convenient way for a driver to get the hardware address of a device, when regmap or syscon are not being used. Change existing callers to use it as an example to others. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* video: ct69000: Remove unused codesBin Meng2015-08-26-21/+0
| | | | | | | | Remove unused CONFIG_USE_CPCIDVI wrapped codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* video: cfb_console: Allow VGA device to work without i8042 keyboardBin Meng2015-08-26-6/+5
| | | | | | | | | | | | | | So far if CONFIG_VGA_AS_SINGLE_DEVICE is not defined, the VGA device will try to initialize a keyboard device (for x86, it is i8042). But if i8042 controller initialization fails (eg: there is no keyboard connected to the PS/2 port), drv_video_init() just simply returns. This kills the opportunity of using a usb keyboard later with the vga console, as the vga initialization part is actually ok, only keyboard part fails. Change the code logic to allow this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* video: coreboot: Save VESA mode for future useBin Meng2015-08-26-0/+24
| | | | | | | | When booting as a coreboot payload, the framebuffer details are passed from coreboot via configuration tables. We save these information into vesa_mode_info structure for future use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* lcd: pxa: clean-up include file orderMarcel Ziswiler2015-08-24-5/+4
| | | | | | | Cleaning up order of include files by sorting them alphabetically keeping in mind to leave common.h on top. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-08-14-1/+1
|\
| * video: vesa: Correct a typo in the Kconfig VESA mode stringBin Meng2015-08-14-1/+1
| | | | | | | | | | | | | | There is one typo in the VESA mode 105h string. Correct it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | sunxi: Display: Add support for eDP panels connected via an anx9804 bridgeHans de Goede2015-08-14-1/+18
| | | | | | | | | | | | | | | | | | | | | | Add support for 4 1.62G lane eDP panels connected via an anx9804 bridge, such as found on the Colombus devkit. While at it also fix the wrong indentation of the SSD2828 Kconfig help text in board/sunxi/Kconfig. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | video: Add support for the ANX9804 parallel lcd to dp bridge chipHans de Goede2015-08-14-0/+222
| | | | | | | | | | | | | | | | | | Add support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into a DP interface for driving eDP TFT displays. It uses I2C for configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* | sun6i: display: Add support for using the mipi pll as lcd clock sourceHans de Goede2015-08-14-7/+34
| | | | | | | | | | | | | | | | | | Add support for using the mipi pll as lcd clock source, this is necessary for getting higher dotclocks with lcd panels. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Anatolij Gustschin <agust@denx.de>
* | sunxi: display: Fix composite video out on sun5iHans de Goede2015-08-14-0/+11
| | | | | | | | | | | | | | | | The tv-encoder on sun5i is slightly different compared to the one on sun4i/sun7i. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: display: Add overscan correctionHans de Goede2015-08-14-12/+39
| | | | | | | | | | | | | | | | | | | | | | Add support for making the visual area of the framebuffer smaller and drawing a black border around it. This is intended for use with overscanning monitors (esp. with composite video out), to avoid part of the picture being invisible. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Anatolij Gustschin <agust@denx.de>
* | cfbconsole: Add support for stride != widthHans de Goede2015-08-14-35/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | cfbconsole currently assumes that the width and stride of the framebuffer are the same, in most places where stride matters it uses a VIDEO_LINE_LEN helper macro. This commit changes the few places not using VIDEO_LINE_LEN to also use VIDEO_LINE_LEN, and protects the default VIDEO_LINE_LEN with a #ifndef guard, allowing the boards config.h to override and, and thus support cases where stride != width. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* | cfbconsole: Remove width argument from the logo functionsHans de Goede2015-08-14-13/+8
|/ | | | | | | | The passed in width is always VIDEO_COLS. This is a preparation patch for adding stride != width support to the cfbconsole code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* drivers: hierarchize drivers Kconfig menuMasahiro Yamada2015-08-12-0/+8
| | | | | | | | | | | The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: bcm283x: Allocate all mailbox buffers cacheline alignedAlexander Stein2015-08-12-2/+2
| | | | | | | | | | The mailbox buffer is required to be at least 16 bytes aligned, but for cache invalidation and/or flush it needs to be cacheline aligned. Use ALLOC_CACHE_ALIGN_BUFFER for all mailbox buffer allocations. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
* sunxi: display: Add composite video out supportHans de Goede2015-08-08-22/+178
| | | | | | | | | | Add composite video out support. This only gets enabled on the Mele M3 for now, since that is were it was tested. It will be enabled on more boards after testing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Add support for interlaced modesHans de Goede2015-08-08-13/+22
| | | | | | | | Add support for interlaced modes, this is a preparation patch for adding composite out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Add a few extra register and constant definesHans de Goede2015-08-08-4/+4
| | | | | | | | | | | | | Add a few extra sunxi display registers and constant defines. Also rename some existing defines (e.g. dropping _GCTRL) and make some more generic (e.g. dropping the 2x scaling from SUNXI_LCDC_TCON1_TIMING_V_TOTAL). This is a preparation patch for adding composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Correct clk_delay calculations for lcd displaysHans de Goede2015-08-08-4/+7
| | | | | | | We should only subtract 2 from the vblank time when using tcon1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Replace #ifdef-ery with helper functionsHans de Goede2015-08-08-34/+56
| | | | | | | | | | | | All the #ifdef-ery in selecting the default and fallback monitor type is becoming unyielding and makes the code hard to read, replace it with a few helper functions. This will also be useful with the upcoming CHIP board which has display adapter daughterboards which should be runtime detectable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* lib/fdtdec: Fix compiling warning caused by changing fdt_addr_t typeYork Sun2015-08-06-1/+1
| | | | | | | | fdt_addr_t is changed to phys_addr_t. The format in debug should be updated to %pa to match the type. Signed-off-by: York Sun <yorksun@freescale.com> CC: Simon Glass <sjg@chromium.org>
* exynos: video: Remove non-device-tree codeSimon Glass2015-08-05-22/+0
| | | | | | We always use device tree on exynos, so remove the unused code. Signed-off-by: Simon Glass <sjg@chromium.org>
* video: Remove the old parade driverSimon Glass2015-08-05-232/+0
| | | | | | | We have a new one which uses driver model and device tree configuration. Remove the old one. Signed-off-by: Simon Glass <sjg@chromium.org>
* exynos: video: Correct debug outputSimon Glass2015-08-05-2/+2
| | | | | | | | | We should not print a message from the driver when the display is set up. This is normal behaviour. Change this message to use debug(). Also remove the double newline on another debug message. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: video: Add support for the NXP PTN3460 bridgeSimon Glass2015-08-05-0/+48
| | | | | | | | | This chip provides an eDP to LVDS bridge which is useful for SoCs that don't support LVDS displays (or it would waste scarce pins). There is no setup required by this chip, other than to adjust power-down and reset pins, and those are managed by the uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: video: Add support for the Parade PS8622/625 bridgeSimon Glass2015-08-05-0/+145
| | | | | | | | This chip provides an eDP to LVDS bridge which is useful for SoCs that don't support LVDS displays (or it would waste scarce pins). The setup is included in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* video: Work around lack of pinctrlSimon Glass2015-08-05-10/+18
| | | | | | | | | | We haven't quite got pinctrl ready to apply to mainline. We don't want to GPIO pull-up/down support to the driver model GPIO layer either. So work around this for now. We can address this when pinctrl is complete. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: video: Add support for video bridgesSimon Glass2015-08-05-0/+130
| | | | | | | | | A video bridge typically converts video from one format to another, e.g. DisplayPort to LVDS. Add driver model support for these with a simple interface to control activation and backlight. The uclass supports GPIO control of power and reset lines. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Gracefully disable the vesa driver when running from EFISimon Glass2015-08-05-0/+8
| | | | | | | | | | | We cannot use this driver when running from EFI as we have no direct hardware access. In fact coreboot uses a different driver which uses tables provided by coreboot. So far it does not seem possible to use a normal video driver when booting from EFI. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* video: vesa_fb: Look up VGA device by class instead of idBin Meng2015-07-14-14/+2
| | | | | | | | | Per PCI spec, VGA device reports its class as standard 030000h in its configuration space, so we can use it to determine if we need run option rom instead of testing the supported vendor/device ids. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Remove typedefs from bmp_layout.hSimon Glass2015-06-10-9/+9
| | | | | | | | | We try to avoid typedefs and these ones are easy enough to remove. Before changing this header in the next patch, remove the typedefs. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* tegra: lcd: Tidy up clock initSimon Glass2015-06-09-3/+1
| | | | | | | Use the correct function for clock init. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video KconfigBin Meng2015-06-04-0/+138
| | | | | | | | | | CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE are not x86-specific, so move them to drivers/video/Kconfig and make them depend on VIDEO_VESA driver. Some cosmetic fixes are applied to the Kconfig help text as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* video: Kconfig: Make VESA driver avaiable for non-x86 boardsBin Meng2015-06-04-1/+0
| | | | | | | | There is no reason to prevent CONFIG_VIDEO_VESA driver working on non-x86 boards, so remove such limitation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* cosmetic: change Author/MAINTAINER Name from Petermaier to SchmelzerHannes Schmelzer2015-05-28-2/+2
| | | | | | | | | | | Since i've been married, i also have a new surname. Mr. Petermaier moved to Mr. Schmelzer. In this patch i update all files in which my (old) name is present. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* sunxi: video: Fix lvds panel support for sun6i+Hans de Goede2015-05-19-1/+17
| | | | | | | | | We've never tested the lvds panel support on sun6i+ SoCs until now, and unsurprisingly the lvds code needed some fixes to work on my ga10h A33 tablet with lvds panel. This makes the panel on that tablet actually work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* tegra124: video: Add full link training for eDPSimon Glass2015-05-13-64/+1079
| | | | | | | | | Add full link training as a fallback in case the fast link training fails. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: video: support eDP displays on Tegra124 devicesSimon Glass2015-05-13-0/+465
| | | | | | | | | Connect up the clocks and the eDP driver to make these displays work with Tegra124-based devices. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: video: Add Embedded DisplayPort driverSimon Glass2015-05-13-0/+1265
| | | | | | | | | | This interface is used on laptop devices based on Tegra. Add a driver which provides access to the eDP interface. The driver uses the display port uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: video: Support serial output resource (SOR) on tegra124Simon Glass2015-05-13-0/+1809
| | | | | | | | | The SOR is required for talking to eDP LCD panels. Add a driver for this which will be used by the DisplayPort driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* dm: video: Add a uclass for display portSimon Glass2015-05-13-0/+45
| | | | | | | | | eDP (Embedded DisplayPort) is a standard widely used in laptops to drive LCD panels. Add a uclass for this which supports a few simple operations. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: display: Fix gpio handling to work with the driver-modelHans de Goede2015-05-04-8/+8
| | | | | | | | | The driver-model gpio functions may return another value then -1 as error, make the sunxi display code properly handle this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add basic A33 basic supportVishnu Patekar2015-05-04-0/+3
| | | | | | | | Enable full support for the A33 SoC including display, otg-usb, etc. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig boolHans de Goede2015-05-04-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | sun6i and newer (derived) SoCs such as the sun8i-a23, sun8i-a33 and sun9i have a various things in common, like having separate ahb reset control registers, the SID living inside the pmic, custom pmic busses, new style watchdog, etc. This commit introduces a new hidden SUNXI_GEN_SUN6I Kconfig bool which can be used to check for these features avoiding the need for an ever growing list of "#if defined CONFIG_MACH_SUN?I" conditionals as we add support for more "new style" sunxi SoCs. Note that this commit changes the behavior of the gmac and hdmi code for sun8i and the upcoming sun9i devices. This does not matter as sun8i does not have gmac nor hdmi, and sun9i has new hardware-blocks for these so the old code will not work there. Also this is intentional as if a sun8i / sun9i variant which does use the old hwblocks shows up then the GEN_SUN6I code paths will be the right ones to use. For completeness this also adds a SUNXI_GEN_SUN4I bool for A10/A13/A20. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2015-04-20-2/+245
|\
| * video, lg4573: add support for the lg4573 displayHeiko Schocher2015-04-20-0/+232
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * video, ipu: make ldb clock frequency overwritable through board codeHeiko Schocher2015-04-20-1/+8
| | | | | | | | | | | | | | | | | | | | the ldb clock can be setup in board code (for example set through PLL5). Update the ldb_clock rate also through board code. This should be removed, if a clock framework is availiable. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * video, ipu: make ldb_clock configurableHeiko Schocher2015-04-20-1/+5
| | | | | | | | | | | | | | | | | | | | make the ldb_clock configurable through the new define CONFIG_SYS_LDB_CLOCK. This is needed as the ldb clock is not always 650000000, for example on the aristainetos2 board, where the ldb clock derives from PLL5 clock. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
generated by cgit v1.1 at 2024-11-06 05:57:54 +0000