summaryrefslogtreecommitdiff
path: root/drivers/video
Commit message (Collapse)AuthorAgeLines
* MLK-12492-1 mx6: fix type style problems introduced by patch MLK-12483Ye Li2016-03-04-2/+1
| | | | | | | Some type style problems found by review-commits for previous patch MLK-12483, fix them in this patch and re-check. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12483-4 mx6: Modify drivers to disable fused modulesYe Li2016-03-04-0/+25
| | | | | | | | | | Add the fuse checking in drivers, when the module is disabled in fuse, the driver will not work. Changed drivers: BEE, GPMI, APBH-DMA, ESDHC, FEC, QSPI, ECSPI, I2C, USB-EHCI, GIS, LCDIF. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-11952 Video: IPU: Fix dereferencing NULL pointer problemYe.Li2016-03-04-0/+4
| | | | | | | | By Coverity check, the clk_set_rate function dereferences the clk pointer without checking whether it is NULL. This may cause problem when clk is NULL. Fix the problem by adding NULL check. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11897 video: ipu: fix out of bounds accessPeng Fan2016-03-04-2/+3
| | | | | | | | | We need to access reg stp_rep9, but not stp_rep[(9 - 1) / 2]. If using "__raw_writel(0, DI_STP_REP(disp, 9))", this will exceeds the size of stp_rep array. Acked-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11263-2 video: epdc: move setup_waveform_file to board commonPeng Fan2015-08-03-1/+1
| | | | | | | | | | | Since setup_waveform_file in different boards code have same implementation, move setup_waveform_file to board common code. Also rename it to board_setup_waveform_file This patch also fix a bug when using flush_cache. We should pass 'waveform_buf' to flush_cache, but not a string named 'addr'. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11263-1 video: epdc: support display logo on E-Ink screenPeng Fan2015-08-03-12/+4
| | | | | | | | | | | | | | | | | | | Support draw image on E-ink screen. 1. The image format should be PGM-P5 raw data format. 2. The image should be named epdc_logo.pgm. 3. If no epdc_logo.pgm found in the first partition(FAT), will choose to draw black border on the screen. 4. Default configuration is to draw image at pos (0,0). If 'splashpos' env is set, will choose the pos from 'splashpos'. 5. The image size should not be bigger than screen total pixel size. 6. Implement board_setup_logo_file in board/freescale/common/epdc_setup.c 7. Introudce function prototype for board_setup_logo_file. Note: i.MX7D EPDC supports advanced mode and standard mode. Since current PXP in uboot for i.MX7D not ready, only support standard mode now. advanced and standard mode needs waveform firmware's support. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10747-2 video: ipu: Enable/disable LDB_DI clock when necessaryLiu Ying2015-05-07-7/+65
| | | | | | | | This patch adds enable/disable hooks support for ldb_di[0/1] clocks and enables/disables them when necessary. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 839a1da941be48baf27c9cb28939cc6b2030424a)
* MLK-10747-1 video: ipu: Build ldb_di clock relevant code only for MX6 and MX53Liu Ying2015-05-07-2/+14
| | | | | | | | The LDB is found in MX6 variants and MX53, so this patch makes the ldb_di clock relevant code be built only for them. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit c0dc175a9780505ec8939bda5dda9c2ec549a7f0)
* MLK-10655 Video: Fix second line string display issueYe.Li2015-04-29-4/+5
| | | | | | | | | | The string display on second line repeats the last word of first line and does not show full. This is the bug introduced by the fixing to MLK-10542. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ac430cee8c42f0acad9e126631d772b99f1166ea) (cherry picked from commit ff62c5b275a9b5e47d570d3eb10622799bf12070)
* MLK-10542 video: Support multiple lines version string displayYe.Li2015-04-29-7/+23
| | | | | | | | | | | | The caculation of left space for version string is not correct, should use VIDEO_COLS not VIDEO_LINE_LEN / 2, otherwise we will get larger space than actual have and cause string to overlay logo picture. Also current version string display only supports two lines words at max. This also causes overlay when the LCD pixel colume size is not enough. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ed53487d36a886fb4557088804a4b5232b168889)
* MLK-10478 mx6: EPDC: Improve EPDC usage and configurationYe.Li2015-04-29-3/+21
| | | | | | | | | | | | | | Change to load EPDC waveform from FAT partition and allocate waveform buffer, framebuffer and working buffer in dynamic manner not static. So many EPDC configurations are removed. To enable the EPDC feature, must define CONFIG_MXC_EPDC and CONFIG_SPLASH_SCREEN. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 4d55a4124be3a3a6288c3c845d17fd9d4f2b8b43) Conflicts: include/configs/mx6slevk.h
* ENGR00325088 video: mxsfb: Disable LCDIF correctlyLiu Ying2015-04-29-5/+9
| | | | | | | | | | | | | | | | | | | | | Let's use the i.MX common miscellaneous reset API to reset the LCDIF block so that we may eliminate a random hang issue at the arch_preboot_os() stage when we disable the LCDIF. This patch also waits for a VSYNC interrupt to guarantee the reset is done at the VSYNC edge, which somehow makes the LCDIF consume the display FIFO(?) and helps the LCDIF work normally at the kernel stage. Tested-by: Jason Liu <r64343@freescale.com> Tested-by: Sandor Yu <R01008@freescale.com> Tested-by: Ye.Li <B37916@freescale.com> Tested-by: Guo Sally <b38912@freescale.com> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 45fa2ad38b846596e61ce8fc477713dede8a43e7) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 9d782aa487c4ffe096c94bbda5867b44afd6a440) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315499-22 video: ipu: wait for DP SF end irq when disabling sync BG flowLiu Ying2015-04-29-3/+3
| | | | | | | | | | | | | | | Instead of waiting for DC triple buffer to be cleared, this patch changes to wait for a relevant DP sync flow end irq when disabling sync BG flows. In this way, we align the implement to the FSL internal IPUv3 driver. After applying this patch, the uboot hang up issue at the arch_preboot_os stage on the MX6DL platforms is not observed any more. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 56d72035946c40f45d2f49ccb1520734e34ecc89) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit d8ac526681589c62287d014fedee4c9e64fbca66) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-5 Add EPDC splash screen for MX 6DL SabreSD and 6SL EVKPeng Fan2015-04-29-0/+454
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board. - Currently, splash screen consists of a simple black border around a white screen. Done this way to save in memory footprint. - EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly (hang), since some additional content on the boot device (waveform file) is required for EPDC splash to work correctly. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit b8ab9b3eabb94bbbc1eea63e7c0e2a87d2d645f4) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/mx6sl_pins.h board/freescale/mx6sabresd/mx6sabresd.c board/freescale/mx6slevk/mx6slevk.c drivers/video/Makefile include/configs/mx6sabresd.h include/configs/mx6slevk.h include/lcd.h drivers/video/Makefile
* ENGR00315894-81 gis: Add gis moduleYe.Li2015-04-29-0/+603
| | | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) Conflicts: drivers/video/Makefile
* ENGR00315894-80 pxp: Add pxp moduleYe.Li2015-04-29-0/+324
| | | | | | | | | | Add pxp module. Support csc between YUV444 and RGB888 and scaling. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 4c6e1f9ed1b2f5c98a34502b44b6414593fdd290) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-79 csi: Add csi moduleYe.Li2015-04-29-0/+425
| | | | | | | | | Add csi module. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 854ae26758ec8132ef749b98645dd2f43b84e5e2) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-78 vadc: Add vadc moduleYe.Li2015-04-29-0/+602
| | | | | | | | | | Add vadc module. Both PAL and NTSC mode can work. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 03c31ae30c1e81c99f6824221e4801433445e04a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2015-04-29-10/+49
| | | | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 054fed6bab5b05a054c7e3cb5362635a40e6ee18) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2015-04-29-19/+50
| | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 45d532a0237f5baf2ec95b4364ec5bc94d312689) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* video: parade: configure SLP and RST GPIOs if specified in DTAjay Kumar2015-04-06-0/+11
| | | | | | | | | | Add support to configure EDP_RST GPIO and EDP_SLP GPIO, if provided in parade DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* video: exynos_fb: configure backlight GPIOs if specified in DTAjay Kumar2015-04-06-0/+21
| | | | | | | | | | Add support to configure PWM_OUT(PWM output) GPIO and BL_EN(backlight enable) GPIO, if provided in FIMD DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* remove unnecessary version.h includesRob Herring2015-03-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* drivers/video/am335x-fb: Add possibility to wait for stable power/pictureHannes Petermaier2015-03-05-7/+15
| | | | | | | | | | | | | | Often on boards exists a circuit which switches power on/off to LCD display. Due to the need of limiting the in-rush current the output voltage from this circuit rises "slowly", so it is necessary to wait a bit (VCC ramp up time) before starting output on LCD-pins. This time is specified in <n> ms within the panel-settings, called "pup_delay" Further some LCDs need a couple of frames to stabilize the image on it. We have now the possibility to wait some time after starting output on LCD. This time is also specified in <n> ms within panel-settings, called "pon_delay" Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* ARM: remove jadecpu board supportMasahiro Yamada2015-02-24-169/+0
| | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Weisser <weisserm@arcor.de> Acked-by: Marek Vasut <marex@denx.de>
* sunxi: video: Add support for tl059wv5c0 lcd panelsHans de Goede2015-02-20-0/+7
| | | | | | | | Add support for the 6" 480x800 tl059wv5c0 panel used on e.g. Utoo P66 and Aigo M60/M608/M606 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Add support for LCD reset pinHans de Goede2015-02-20-1/+10
| | | | | | | On some boards there is a gpio to reset the LCD panel, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Dynamically reserve framebuffer memoryHans de Goede2015-02-16-5/+13
| | | | | | | | | | Only use CONFIG_SUNXI_MAX_FB_SIZE to reserve memory at the top when relocating u-boot, and calculate the actual amount of memory necessary when setting up the video-mode and use only that, freeing up some additional memory for use by the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebufferHans de Goede2015-02-16-1/+21
| | | | | | | | | | | | | | | | | | Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer, instead override board_get_usable_ram_top to make sure that u-boot is not relocated into the area where we want to use the framebuffer, and patch the devicetree from sunxi_simplefb_setup() to tell the kernel to not touch the framebuffer. This makes u-boot properly see the framebuffer as dram, and initalize the level 2 cache for it, fixing the very slow cfb scrolling problem. As an added bonus this stops us from reserving the framebuffer when simplefb is not used because an older kernel is booted, or hdp is used and no hdmi cable was plugged in, freeing up the memory for kernel use in these cases. Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-10-3/+6
|\
| * x86: bootstage: Add time measurement for vesa start-upSimon Glass2015-02-05-0/+2
| | | | | | | | | | | | | | | | Since we must run a PCI BIOS ROM, and this can take a calamitous amount of time, measure it using bootstage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: video: Allow video ROM execution to fall back to the other methodSimon Glass2015-02-05-3/+3
| | | | | | | | | | | | | | | | If the BIOS emulator is not available, allow use of native execution if available, and vice versa. This can be controlled by the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: video: Enable video for Minnowboard MaxSimon Glass2015-02-05-0/+1
| | | | | | | | | | | | | | This board uses a new PCI ID. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-02-10-1/+1
|\ \
| * | ARM: atmel: cleanup: remove at91cap9 related codeBo Shen2015-02-07-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | As the at91cap9adk board is removed by commit: b5508344 (ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | lcd: introduce lcd_set_cmapNikita Kiryanov2015-02-10-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel-specific code for setting cmap for bitmap images into a new function lcd_set_cmap(). A default version is implemented with the remainder of the code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.cNikita Kiryanov2015-02-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the bitmap_plot #ifdef complexity by extracting MPC823-specific code for setting cmap into its own implementation of lcd_logo_set_cmap(), implemented in mpc8xx_lcd.c. In the MPC823 implementation, ARRAY_SIZE(bmp_logo_palette) is switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which would cause a compilation error because the logo data and palette arrays would be defined twice. This is a step towards cleaning bitmap_plot() of platform-specific code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | lcd: atmel: introduce lcd_logo_set_cmapNikita Kiryanov2015-02-10-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the bitmap_plot #ifdef complexity by extracting Atmel-specific code for setting cmap into a new function lcd_logo_set_cmap(), which is implemented in atmel_lcdfb driver and defined as part of common/lcd.c api with a weak dummy version. In the Atmel implementation, ARRAY_SIZE(bmp_logo_palette) is switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which would cause a compilation error because the logo data and palette arrays would be defined twice. This is a step towards cleaning bitmap_plot() of platform-specific code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.cNikita Kiryanov2015-02-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the amount of platform-specific code in common/lcd.c by moving MPC823 implementation of fb_put_byte() to mpc8xx_lcd.c. Since we must also have a default implementation for everybody else, make the remainder of the code into a weak function. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfbNikita Kiryanov2015-02-10-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the amount of platform-specific code in common/lcd.c by moving Atmel implementation of fb_put_word() to atmel_lcdfb.c. Since we must also have a default implementation for everybody else, make the remainder of the code into a weak function. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Bo Shen <voice.shen@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | lcd: split configuration_get_cmapNikita Kiryanov2015-02-10-0/+40
|/ | | | | | | | | | | | | | configuration_get_cmap() is multiple platform-specific functions stuffed into one function. Split it into multiple versions, and move each version to the appropriate driver to reduce the #ifdef complexity. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2015-02-02-3/+9
|\
| * sunxi: video: Force h/vsync active high when using ext. vga dac on some boardsHans de Goede2015-02-02-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On both my A13-OLinuxIno and my A13-OLinuxIno-Micro, the vga output gives an unstable image when active low v or hsync is used. The problem seems to be specific to the OLinuxIno A13 (normal & micro) boards. I've just looked up the schematics and they use an opendrain driver for the vga sync lines, and with sync pulses it is the logical high->low edge of the pulse which counts for the timing, which with an active low sync is being driven by the pull-up, and that simply seems to not drive it hard enough to get a stable image. So force v and hsync active high on these boards. independent of what the modeline says. This fixes the unstable image. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | dm: tegra: video: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-34/+20
|/ | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: video: Add support for CONFIG_CONSOLE_SCROLL_LINESSimon Glass2015-01-23-9/+17
| | | | | | | | | | | | | Some machines are very slow to scroll their displays. To cope with this, support the CONFIG_CONSOLE_SCROLL_LINES option. Setting this to 5 allows the display to operate at an acceptable speed by scrolling 5 lines at a time. This same option is available for LCDs so when these systems are unified this code can be unified also. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* x86: Drop the x86_fb driverSimon Glass2015-01-23-48/+0
| | | | | | | | Now that we have a full VESA driver we may as well use that. We need to support the VESA layer being set up by early start-up code or by running a VGA ROM. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add a VESA video driverSimon Glass2015-01-23-0/+75
| | | | | | | | | Add a driver intended to cope with any VESA-compatible x86 graphics adapter. It will not support ROMs which use OpenFirmware (Forth) since there is no support for that in U-Boot. This means that MAC OS cards will not work. Signed-off-by: Simon Glass <sjg@chromium.org>
* powerpc: mpc5xxx: remove Total5200 board supportMasahiro Yamada2015-01-23-8/+0
| | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* sunxi: video: Make pwm polarity configurableHans de Goede2015-01-23-6/+11
| | | | | | | | It turns out that there are some panels where the pwm input is not active low, so make it configurable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panelsHans de Goede2015-01-23-0/+5
| | | | | | | | | | Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-24 21:16:01 +0000