summaryrefslogtreecommitdiff
path: root/drivers/video/Makefile
Commit message (Collapse)AuthorAgeLines
* sunxi: video: Use video-mode/-timing from videomodesHans de Goede2015-01-14-1/+1
| | | | | | | | | Switch from fb_videomode to ctfb_res_modes and use the predefined videotimings from videomodes.c, rather then defining our own. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Anatolij Gustschin <agust@denx.de>
* Merge git://git.denx.de/u-boot-x86Tom Rini2014-12-01-0/+1
|\
| * x86: video: Add video driver for bare x86 boardsSimon Glass2014-11-25-0/+1
| | | | | | | | | | | | | | | | Add a very simple driver which uses vesa to discover the video mode and then provides a frame buffer for use by U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* | sunxi: video: Add cfb console driver for sunxiLuc Verhaegen2014-11-25-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | This adds a fixed mode hdmi driver for the sunxi platform. The fixed mode is a relatively safe 1024x768, more complete EDID handling is currently not provided. Only HDMI is supported today. This code is enabled when HPD detects an attached monitor. Current config is such that 8MB is shaved off at the top of the RAM. This avoids several memory handling issues, most significant is the fact that on linux on ARM you are not allowed to remap known RAM as IO. A clued in display driver will be able to recycle this reserved RAM in future though. cfbconsole was chosen as it provides the most important functionality: a working u-boot console, allowing for the debugging of certain issues without the need for a UART. Signed-off-by: Luc Verhaegen <libv@skynet.be> [hdegoede@redhat.com: Major cleanups and some small bugfixes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-12-0/+1
|\
| * video: Add driver for Parade PS8625 dP to LVDS bridgeVadim Bendebury2014-09-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | The initialization table comes from the "Illustration of I2C command for initialing PS8625" document supplied by Parade. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: dcu: Add DCU driver supportWang Huan2014-09-08-0/+1
|/ | | | | | | | | This patch is to add DCU driver support. DCU also named 2D-ACE(Two Dimensional Animation and Compositing Engine) is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* video: Add support for TI's AM335x LCD-ControllerHannes Petermaier2014-08-10-0/+1
| | | | | | | | - Adds support for a minimal framebuffer driver of TI's AM335x SoC to be compatible with Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* video: Add support for imx25 lcd controllerThomas Diener2014-05-09-0/+1
| | | | | | | This patch adds support for the imx25 lcd display controller. Signed-off-by: Thomas Diener <dietho@gmx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* sandbox: Add LCD driverSimon Glass2014-03-17-0/+1
| | | | | | | | | | | | | Add a simple LCD driver which uses SDL to display the image. We update the image regularly, while still providing for reasonable performance. Adjust the common lcd code to support sandbox. For command-line runs we do not want the LCD to be displayed, so add a --show_lcd option to enable it. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* lcd: add DataImage SCF0403x LCD panel supportNikita Kiryanov2013-11-12-0/+1
| | | | | | | | | | | | Add SPI-based driver for DataImage SCF0403852GGU04 and SCF0403526GGU20 LCD panels. Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-54/+32
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-04-0/+1
|\
| * video: add formike lcd panel initHeiko Schocher2013-08-28-0/+1
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* | video: add L5F31188 TFT-LCD panel driverHyungwon Hwang2013-08-10-0/+1
|/ | | | | | | | | | | | | This is u-boot driver for L5F31188 panel. I tested it in the board based on MIPI DSI with EXYNOS4 series, and it worked well. Changes in V2: - Replaced license header by SPDX-License-Identifier. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Donghwa Lee <dw09.lee@samsung.com> [agust: sort Makefile entry alphabetically] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* arm: mxs: Add MXS LCDIF driverMarek Vasut2013-05-06-0/+1
| | | | | | | | | | | | Add basic LCD driver for i.MX233 and i.MX28. This driver allows framebuffer console and framebuffer logo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'for-v2013.04'Anatolij Gustschin2013-03-29-1/+2
|\ | | | | | | | | | | | | Conflicts: drivers/video/Makefile Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * lcd, pxafb: move the pxafb to drivers/videoJeroen Hofstee2013-03-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since the lcd code was compiled unconditionally for pxa also add CONFIG_PXA_LCD to the boards using this framebuffer. Since driver/video contains video and lcd drivers, add lcd to the name to make clear it belongs to common/lcd.c. cc: Anatolij Gustschin <agust@denx.de> cc: Cliff Brake <cliff.brake@gmail.com> cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| * lcd, mpc8xx: move the mpc8xx driver to drivers/videoJeroen Hofstee2013-03-21-0/+1
| | | | | | | | | | | | | | | | | | Since the lcd code was compiled unconditionally in arch also add CONFIG_MPC8XX_LCD to the boards using this driver. cc: Anatolij Gustschin <agust@denx.de> cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| * lcd, amba: remove this driver since it is not usedJeroen Hofstee2013-03-21-1/+0
| | | | | | | | | | | | | | | | | | | | Since CONFIG_VIDEO_AMBA is not set by any board, it does not seem to be used, so remove it since there is no way to (compile) test it. cc: Alessandro Rubini <rubini@unipv.it> cc: Anatolij Gustschin <agust@denx.de> Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | video: add a driver for the bcm2835Stephen Warren2013-03-20-0/+1
|/ | | | | | | | | | | | | | | The firmware running on the bcm2835 SoC's VideoCore CPU manages the display controller. Add a simple "LCD" driver that communicates with the firmware using the property mailbox protocol. This configures the display and frame-buffer to match whatever physical resolution the firmware chosen when booting, which is typically the native resolution of the attached display device, presumably unless otherwise specified in config.txt on the boot media. Enable this driver in the Raspberry Pi board configuration. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot into resolveMinkyu Kang2012-12-10-0/+1
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * x86: video: Add coreboot framebuffer supportStefan Reinauer2012-11-30-0/+1
| | | | | | | | | | | | | | Add a basic driver for the coreboot framebuffer. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | tegra: Add LCD driverSimon Glass2012-11-19-0/+1
| | | | | | | | | | | | | | | | This driver supports driving a single LCD and providing a U-Boot console on it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | drivers: video: Add ld9040 video driverPiotr Wilczek2012-11-15-0/+1
|/ | | | | | | Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* video: support exynos pwm backlight driverDonghwa Lee2012-09-01-0/+1
| | | | | | | | | This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* video: support exynos display port driversDonghwa Lee2012-09-01-0/+1
| | | | | | | | | | | | | This patch set supports exynos display port drivers. DisplayPort is an industry standard device to accommodate the increasing board adoption of digital display technology within the PC and consumer electronics. The interface supports internal chip-to-chip and external box-to-box digital display connections. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* video: Rename CONFIG_VIDEO_MX5Fabio Estevam2012-07-10-1/+1
| | | | | | Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* video: atmel/lcd: add LCD driver for new Atmel SoCBo Shen2012-06-05-0/+1
| | | | | | | | | | | The new Atmel SoC (at91sam9x5 series and at91sam9n12) add a totally different LCD controller. Add this new driver to support it. Using CONFIG_ATMEL_HLCD (distinguish with CONFIG_ATMEL_LCD) to enable this in board configuration file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* omap3_dss: add optional framebufferJeroen Hofstee2012-05-25-1/+1
| | | | | | | | | | | | | | The beagle board uses the background color to show an orange screen during startup. This patch adds the ability to add a frame buffer, with the intention not to break the beagle board use case (I don't have one). videomodes.c is not used. Scrolling depends on this patch: http://patchwork.ozlabs.org/patch/155662/ cc: trini@ti.com cc: s-paulraj@ti.com cc: khasim@ti.com Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
* LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSIDonghwa Lee2012-05-15-0/+1
| | | | | | | | | This patch support S6E8AX0 amoled driver based on EXYNOS MIPI DSI interface. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: support EXYNOS MIPI DSI interface driver.Donghwa Lee2012-05-15-0/+2
| | | | | | | | | | | | | | | | | EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at board file and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: support EXYNOS framebuffer and FIMD display drivers.Donghwa Lee2012-05-15-0/+1
| | | | | | | | | This patch support EXYNOS FB and FIMD display drivers. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* VIDEO: davinci: add framebuffer to da8xxStefano Babic2011-11-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The patch is a port from the framebuffer driver of the Linux driver drivers/video/da8xx-fb.c, used on davinci da8xx and OMAP-L138 boards. As base for the port, the following commit (last changes for this driver at the moment in the Linux kernel tree) was taken: commit 1db41e032d563eb47deab40dc5595be306b143ba Author: axel lin <axel.lin@gmail.com> Date: Tue Feb 22 01:52:42 2011 +0000 video: da8xx-fb: fix section mismatch warning Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Sandeep Paulraj <s-paulraj@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* video: Moving mx3fb.c to CONFIG_VIDEOHelmut Raiger2011-10-13-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | mx3fb.c was based on CONFIG_LCD and is moved by this patch to CONFIG_VIDEO, which has greater freedom in selecting videomodes even at runtime. This renders the accumulating list of display defines (CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as these may be setup through env variables: uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925, le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0' uboot> setenv videomode ${mydisplay} This commit also fixes the board config files for qong and imx31_phycore boards as needed. The videomode settings of previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased to make the frame buffer allocation working with the changed driver. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* drivers/video/Makefile: include object files only onceWolfgang Denk2011-09-05-3/+3
| | | | | | | | | Use "$(sort $(COBJS-y))" to prevent multiple inclusion of the same object files. Also sort driver list. Signed-off-by: Wolfgang Denk <wd@denx.de>
* video: Fix build error with global inclusion of videomodesKumar Gala2011-09-05-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: commit de701d118380de12a48c8a4fb345e9f909329432 Author: Syed Mohammed Khasim <khasim@ti.com> Date: Tue Apr 19 14:00:34 2011 -0500 OMAP3: Add DSS driver for OMAP3 Added videomodes to the object list w/o any protection. This causes build issues like: videomodes.o:(.rodata.res_mode_init+0x0): multiple definition of `res_mode_init' videomodes.o:(.rodata.res_mode_init+0x0): first defined here videomodes.o: In function `video_get_params': /local/home/galak/git/u-boot/drivers/video/videomodes.c:160: multiple definition of `video_get_params' videomodes.o:/local/home/galak/git/u-boot/drivers/video/videomodes.c:160: first defined here videomodes.o: In function `video_get_video_mode': /local/home/galak/git/u-boot/drivers/video/videomodes.c:229: multiple definition of `video_get_video_mode' videomodes.o:/local/home/galak/git/u-boot/drivers/video/videomodes.c:229: first defined here videomodes.o:(.rodata.vesa_modes+0x0): multiple definition of `vesa_modes' videomodes.o:(.rodata.vesa_modes+0x0): first defined here make[1]: *** [libvideo.o] Error 1 Remove the unconditional inclusion and move to adding to CONFIG_VIDEO_OMAP3 case. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* OMAP3: Add DSS driver for OMAP3Syed Mohammed Khasim2011-09-04-0/+2
| | | | | | | | | | | | | * Supports dynamic panel configuration * Supports dynamic tv standard selection * Adds support for DSS register access through generic APIs * Incorporated DSS register access using structures. * DSS makefile update Previous discussions are here: http://www.mail-archive.com/u-boot@lists.denx.de/msg27150.html Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* powerpc: use 'video-mode' environment variable to configure DIUTimur Tabi2011-04-28-1/+1
| | | | | | | | | | | | | | | | Use the 'video-mode' environment variable (for Freescale chips that have a DIU display controller) to designate the full video configuration. Previously, the DIU driver used the 'monitor' variable, and it was used only to determine the output video port. The old definition of the "monitor" environment variable only determines which video port to use for output. This variable was set to a number (0, 1, or sometimes 2) to specify a DVI, LVDS, or Dual-LVDS port. The resolution was hard-coded into board-specific code. The Linux command-line arguments needed to be hard-coded to the proper video definition string. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: move fsl_diu_fb driver to drivers/videoAnatolij Gustschin2010-12-01-0/+1
| | | | | | | | | Since the driver is used not only on Freescale boards, we move it to a common place for video drivers as suggested by Wolfgang. The patch also cleans up the top level Makefile. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* MX51: Add video supportStefano Babic2010-10-22-0/+1
| | | | | | | | | | | | | Add framebuffer driver for the MX51 processor working on the IPUv3 internal graphic processor. The port is based on the driver found in the kernel delivered by Freescale as part of i.MX BSP: [kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f] [agust@denx.de: some style fixes and dead code removal] Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: add support for display controller in MB86R0x SoCsMatthias Weisser2010-08-10-0/+1
| | | | | | | | This patch adds support for the display controller in the MB86R0x SoCs. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* drivers/*/Makefile: fix conditional compile rule.Ender.Dai2010-05-06-5/+4
| | | | | | Fix conditional compile rule for twl4030.c and videomodes.c. Signed-off-by: Ender.Dai <ender.dai@gmail.com>
* video: add amba-clcd prime-cellAlessandro Rubini2010-01-27-0/+1
| | | | | | | | | | This adds support for the CLCD logic cell. It accepts precompiled register values for specific configuration through a board-supplied data structure. It is used by the Nomadik nhk8815, added by a later patch in this series. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
* new video driver for bus vcxk framebuffersJens Scharsig2009-07-26-0/+1
| | | | | | | | | | This patch adds a new video driver * adds common bus_vcxk framebuffer driver Signed-off-by: Jens Scharsig <esw@bus-elektronik.de> [agust@denx.de: fixed lots of style issues before applying] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: add an i.MX31 framebuffer driverGuennadi Liakhovetski2009-02-24-0/+1
| | | | | | | | | Add a driver for the Synchronous Display Controller and the Display Interface on i.MX31, using IPU for DMA channel setup. So far only displaying of bitmaps is supported, no text output. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* A driver for the S6E63D6 SPI display controller from SamsungGuennadi Liakhovetski2009-02-24-0/+1
| | | | | | | | | This is a driver for the S6E63D6 SPI OLED display controller from Samsung. It only provides access to controller's registers so the client can freely configure it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* video: Clean drivers/video/MakefileMichal Simek2008-08-18-8/+8
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>