summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
* usb: gadget: at91_udc: add at91_udc into U-BootHeiko Schocher2015-09-11-517/+103
| | | | | | | add U-Boot specific changes to the at91_udc linux driver, so it works with U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de>
* usb: gadget: at91_udc: port linux driver at91_udcHeiko Schocher2015-09-11-0/+2211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | port at91_udc driver from linux: original commit Message: commit c94e289f195e0e13cf34d27f9338d28221a85751 Author: Arnd Bergmann <arnd@arndb.de> Date: Sat Apr 11 00:14:21 2015 +0200 usb: gadget: remove incorrect __init/__exit annotations A recent change introduced a link error for the composite printer gadget driver: `printer_unbind' referenced in section `.ref.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Evidently the unbind function should not be marked __exit here, because it is called through a callback pointer that is not necessarily discarded, __composite_unbind() is indeed called from the error path of composite_bind(), which can never work for a built-in driver. Looking at the surrounding code, I found the same problem in all other composite gadget drivers in both the bind and unbind functions, as well as the udc platform driver 'remove' functions. Those will break if anyone uses the 'unbind' sysfs attribute to detach a device from a built-in driver. This patch removes the incorrect annotations from all the gadget drivers. Signed-off-by: Heiko Schocher <hs@denx.de>
* usb: ehci: remember init modeStephen Warren2015-09-07-1/+7
| | | | | | | | | | | | | | When an EHCI device is registered in device mode, the HW isn't actually initialized at all, and hence isn't left in a running state. Consequently, when the device is deregistered, ehci_shutdown() will fail, since the HW bits it expects to see set in response to its shutdown requests will not be sent, and the message "EHCI failed to shut down host controller." will be printed. Fix ehci-hcd.c to remember whether the device was registered in host or device mode, and only call ehci_shutdown() for host mode registrations. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZESiva Durga Prasad Paladugu2015-09-07-1/+1
| | | | | | | | | | Allocate request up to THOR_PACKET_SIZE not the ep0->maxpacket as the descriptors data depend on the number of descriptors and this 64 bytes were not enough and the buffer might overflow which results in memalign failures later. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* f_thor: Dont perform reset at the end of thorSiva Durga Prasad Paladugu2015-09-07-0/+10
| | | | | | | | | | | | | Dont perform reset at the end of thor download if configured to do reset off. Reset may not be required in all cases and hence provided an option to do so. The case would be to download the images to DDR instead of flash device. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-31-3/+1
|\
| * sunxi: musb: Drop no longer accurate comment in Kconfig help textHans de Goede2015-08-31-3/+1
| | | | | | | | | | | | | | | | | | Drop the no longer accurate part of the USB_MUSB_SUNXI Kconfig help text, since the musb-host code now supports the device-model, ehci and musb in host mode can both be enabled at the same time without issues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | dm: Use dev_get_addr() where possibleSimon Glass2015-08-31-4/+6
|/ | | | | | | | | | This is a convenient way for a driver to get the hardware address of a device, when regmap or syscon are not being used. Change existing callers to use it as an example to others. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xxKishon Vijay Abraham I2015-08-28-4/+11
| | | | | | | | Added support to power on/power off the second USB PHY present in DRA7xx and AM57xx. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interruptsKishon Vijay Abraham I2015-08-28-18/+28
| | | | | | | | | | Writing "0x00" to the USBOTGSS_IRQENABLE_SET_MISC and USBOTGSS_IRQENABLE_SET_0 doesn't disable the interrupts. Used USBOTGSS_IRQENABLE_CLR_MISC and USBOTGSS_IRQENABLE_CLR_0 instead. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: pxa27x_udc: clean-up include file orderMarcel Ziswiler2015-08-24-3/+2
| | | | | | | Cleaning up order of include files by sorting them alphabetically keeping in mind to leave common.h on top. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* usb: dwc2: Rename to dwc2_usbMarek Vasut2015-08-19-1/+1
| | | | | | | This driver is not used only on exynos, but also on Altera SoCFPGA, HiSilicon SoCs, RPi etc, so rename it accordingly to prevent confusion. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: dwc2: Add original Synopsys compat stringMarek Vasut2015-08-19-0/+1
| | | | | | Add the Synopsys compatible string. This is used in SoCFPGA DT files. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: gadget: ether: populate _reset_ callbackKishon Vijay Abraham I2015-08-19-0/+1
| | | | | | | | | | | populate _reset_ callback to the USB ethernet gadget since UDC core expects every gadget driver to have the reset callback. This shouldn't be needed once the ethernet gadget driver is adapted to use the composite driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stopKishon Vijay Abraham I2015-08-19-0/+1
| | | | | | | | | | | | xhci omap driver has board_usb_init in xhci_hcd_init but doesn't have the corresponding cleanup function in xhci_hcd_stop. Fix it here by invoking board_usb_cleanup() in xhci_hcd_stop(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: gadget: ether: Perform board initialization from ethernet gadget driverKishon Vijay Abraham I2015-08-19-0/+4
| | | | | | | | | | | Ethernet gadget driver can be used both by both SPL and u-boot. Since usb_eth_init() is the entry point for ethernet gadget driver, perform board initialization there. Also perform the cleanup in usb_eth_halt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: xhci: Fix a potential NULL pointer dereferenceSergey Temerkhanov2015-08-19-5/+14
| | | | | | | | | This patch fixes a potential NULL pointer dereference arising on non-present/non-initialized xHCI controllers and adds some error handling to xHCI code Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* usb: spear: Add support for both SPEAr600 EHCI controllersStefan Roese2015-08-19-3/+35
| | | | | | | | | | | USB EHCI on SPEAr600 has not been tested for a while. The base controller addresses are missing. This patch adds the defines to the header. And adds the missing code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Marek Vasut <marex@denx.de>
* imx: usb: ehci-mx6: wait_for_bit to check reg statusAdrian Alonso2015-08-19-4/+33
| | | | | | | Add wait_for_bit to check reg bit status and replace unbounded loops to check usb command status Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: add usb support for imx7d socAdrian Alonso2015-08-19-19/+82
| | | | | | Extend ehci-mx6 usb driver to support imx7d usb Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: document board specific functionsAdrian Alonso2015-08-19-0/+31
| | | | | | | | | | Document target board specific functions board_ehci_hcd_init - override usb phy mode board_ehci_hcd_init - set usb vbus voltage board_ehci_power - enables/disables usb vbus voltage Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: reg accessor cleanupsAdrian Alonso2015-08-19-33/+18
| | | | | | Cleanup read/write register access, use clr/set bits_le32 Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* usb: lpc32xx: add host USB driverSylvain Lemieux2015-08-18-0/+232
| | | | | | | | | | | | | Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* arm: mvebu: add multiple usb-hostcontroller support for AXPAnton Schubert2015-08-17-8/+11
| | | | | | | | | | | This patch adds support for multiple hostcontrollers to the ehci-marvell driver and enables all 3 usb-hcs on the db-mv784mp-gp board. It depends on the initial Armada XP usb support patch from Stefan. Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Enable USB EHCI support on Armada XPStefan Roese2015-08-17-1/+8
| | | | | | | | | | | | | | | | | This patch enables the USB EHCI support for the Marvell Armada XP (AXP) SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done this already in the bin_hdr (SPL U-Boot). Without this, accessing the controller registers in U-Boot or Linux will hang the CPU. Additionally, the AXP uses a different USB EHCI base address. This patch also takes care of this by runtime SoC detection in the Marvell EHCI driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* usb: ohci: enable cache supportWu, Josh2015-08-12-12/+2
| | | | | | | | Remove the CONFIG_DM_USB limitation to enable cache support functions. Tested on SAMA5D3x-EK board. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* dwc2: Add dcache supportAlexander Stein2015-08-12-7/+17
| | | | | | | | | | | This adds dcache support for dwc2. The DMA buffers must be DMA aligned and is flushed for outgoing transactions before starting transfer. For ingoing transactions it is invalidated after the transfer has finished. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [trini: Update to apply again on top of DM patches] Signed-off-by: Tom Rini <trini@konsulko.com>
* sunxi: usb-phy: Never power off the usb portsHans de Goede2015-08-08-14/+16
| | | | | | | | | | | | | | | | | | | | | USB devices are not really designed to get the power bounced off and on at them. Esp. USB powered harddisks do not like this. Currently we power off the USB ports both on a "usb reset" and when booting the kernel, causing the usb-power to bounce off and then back on again. This patch removes the powering off calls, fixing the undesirable power bouncing. Note this requires some special handling for the OTG port: 1) We must skip the external vbus check if we've already enabled our own vbus to avoid false positives 2) If on an usb reset we no longer detect that the id-pin is grounded, turn off vbus as that means an external vbus may be present now Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge git://git.denx.de/u-boot-dmTom Rini2015-08-06-201/+524
|\
| * net: smsc95xx: Add driver-model supportSimon Glass2015-08-06-0/+142
| | | | | | | | | | | | | | Add support for driver model, so that CONFIG_DM_ETH can be defined and used with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Prepare for conversion to driver modelSimon Glass2015-08-06-122/+150
| | | | | | | | | | | | | | | | At present struct eth_device is passed around all over the place. This does not exist with driver model. Add explicit arguments instead, so that with driver model we can pass the correct things. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Correct the error numbersSimon Glass2015-08-06-22/+26
| | | | | | | | | | | | | | Instead of returning -1 on error, we should use a proper error number. Fix the code to conform to this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZESimon Glass2015-08-06-5/+5
| | | | | | | | | | | | | | The AX_ prefix comes from the Asix driver. Since this is not that, we should avoid this confusing prefix. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Sort the include filesSimon Glass2015-08-06-2/+3
| | | | | | | | | | | | Tidy up the include file order before adding more. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Add driver-model support to dwc2Simon Glass2015-08-06-0/+97
| | | | | | | | | | | | | | Add driver model support to this driver so it can be used with the new USB stack. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Prepare dwc2 driver for driver-model conversionSimon Glass2015-08-06-54/+104
| | | | | | | | | | | | | | Put all global data in a structure and move (what will be) common code into common functions. This will make the driver-model conversion much easier. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Add an errno.h header to usb_ether.cSimon Glass2015-08-06-0/+1
| | | | | | | | | | | | This is required on some platforms, so add it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Tegra: clocks: Add 38.4MHz OSC support for T210 useTom Warren2015-08-05-5/+13
|/ | | | | | | | | | | | | | | Added 38.4MHz/48MHz entries to pll_x_table for CPU PLL. Needs to be measured - should be close to 700MHz (1.4G/2). Note that some freqs aren't in the PLLU table in T210 TRM (13, 26MHz), so I used the 12MHz table entry for them. They shouldn't be selected since they're not viable T210 OSC freqs. Since there are now 2 new OSC defines, all tables (pll_x_table, PLLU) had to increase by two entries, but since 38.4/48MHz are not viable osc freqs on T20/30/114, etc, they're just set to 0. Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: asix: fix operation without eepromMarcel Ziswiler2015-08-05-6/+34
| | | | | | | | | | This patch fixes operation of our on-board AX88772B chip without EEPROM but with a ethaddr coming from the regular U-Boot environment. This is a forward port of some remaining parts initially implemented by Antmicro. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: USB storage-specific part ifdef in uclassPaul Kocialkowski2015-08-05-0/+2
| | | | | | | usb_stor_reset is only defined when USB storage support is enabled, thus the function is not declared when such support is missing. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* musb: sunxi: Force EP0 on re-enableMaxime Ripard2015-08-05-0/+3
| | | | | | | | Currently, the second use of a gadget will fail, while the first one works. Forcing the EP0 at every enable fix this issue. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* sunxi: usb: USB_MUSB_SUNXI move to musb-new KconfigPaul Kocialkowski2015-08-05-0/+14
| | | | | | | | | | | Now that the musb-new driver has a Kconfig, we can move Kconfig options to enable controllers to it, so that it's easier in e.g. menuconfig. In addition, this allows declaring support for USB_MUSB_HOST/GADGET in defconfigs instead of the USB_MUSB_SUNXI controller, that will get selected automatically when needed. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: musb-new: Kconfig support for USB_MUSB_HOST and USB_MUSB_GADGETPaul Kocialkowski2015-08-05-0/+16
| | | | | | | Having MUSB_HOST and MUSB_GADGET in Kconfig allows more flexibility with regard to what Kconfig options to enable, such as USB_STORAGE or USB_KEYBOARD. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-05-35/+35
| | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: Generic USB Kconfig option, that fits both host and gadget and commentsPaul Kocialkowski2015-08-05-7/+8
| | | | | | | | | | | There is no particular reason why the USB Kconfig option should be specific to host mode. In prevision of adding MUSB host and gadget to Kconfig, this moves the title and help message of the USB Kconfig option to a more generic format. Adding comments to the usb Kconfig allows for a better separation and more readability in generated configs and in menuconfig. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: USB_ARCH_HAS_HCD Kconfig option removalPaul Kocialkowski2015-08-05-3/+0
| | | | | | | | | | The USB_ARCH_HAS_HCD currently serves no purpose and adds some confusion to the required Kconfig options that are required to have USB support. Dropping it makes things easier and doesn't break anything, since it was unused anyways. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: dwc2: Call board_usb_init() from usb_lowlevel_init()Peter Griffin2015-08-05-0/+4
| | | | | | | | | | This patch makes the dwc2 controller like ehci / ohci / xhci controllers by calling the board_usb_init() function from usb_lowlevel_init. This can then be implemented by specific platforms to initialise their USB hardware (phys / clocks etc). Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-0/+36
|\
| * usb: kconfig: create a menu for usbNikita Kiryanov2015-08-02-0/+2
| | | | | | | | | | | | | | | | | | | | With recent additions to USB Kconfig the number of USB options had grown large enough to warrant a separate menu for USB. Add a Kconfig menu for USB. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * usb: kconfig: usb keyboard kconfigNikita Kiryanov2015-08-02-0/+27
| | | | | | | | | | | | | | | | | | | | Add Kconfig options for USB keyboard and use them for cm-fx6. Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
generated by cgit v1.1 at 2024-12-28 20:53:56 +0000