summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
...
* usb: musb-new: omap2430: OMAP4 MUSB USB controller supportPaul Kocialkowski2016-03-15-0/+25
| | | | | | | This adds support for the OMAP4 MUSB USB controller, with a matching Linux compat definition, TWL6030 USB device setup and USBOTGHS register setup. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: dwc2: disable erroneous overcurrent conditionDinh Nguyen2016-03-05-1/+5
| | | | | | | | | | | For the case where an external VBUS is used, we should enable the external VBUS comparator in the driver. This would prevent an unnecessary overcurrent error which would then disable the host port. The overcurrent condition was happening on the SoCFPGA Cyclone5 devkit, thus USB was not working on the devkit. This patch fixes that problem. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* usb: gadget: composite: Correct recovery path for registerSam Protsenko2016-03-01-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | In case when usb_composite_register() failed once (for whatever reason), it will fail further even if all conditions are correct. Example: => fastboot 2 Invalid Controller Index couldn't find an available UDC g_dnl_register: failed!, error: -19 exit not allowed from main input shell. => fastboot 0 g_dnl_register: failed!, error: -22 exit not allowed from main input shell. Despite that 0 is correct index for USB controller, "fastboot 0" command will fail, because "composite" structure wasn't cleared properly on previous fail (on "fastboot 2" command). This patch fixes that erroneous behavior, allowing us to use composite even after previous failure. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: ehci: Fix warning on aarch64Marek Vasut2016-02-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix the following warning on aarch64 introduced by using p2v/v2p functions in the code: In file included from ./arch/arm/include/asm/byteorder.h:29:0, from include/compiler.h:125, from include/image.h:19, from include/common.h:88, from drivers/usb/host/ehci-hcd.c:10: drivers/usb/host/ehci-hcd.c: In function ‘ehci_td_buffer’: drivers/usb/host/ehci-hcd.c:250:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); ^ include/linux/byteorder/little_endian.h:34:51: note: in definition of macro ‘__cpu_to_le32’ #define __cpu_to_le32(x) ((__force __le32)(__u32)(x)) ^ drivers/usb/host/ehci-hcd.c:250:24: note: in expansion of macro ‘cpu_to_hc32’ td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* fastboot: update error and warning messagesSteve Rae2016-02-24-5/+5
| | | | | | | Fix the formatting in error messages, and demote one error message to a warning, as it is only informational. Signed-off-by: Steve Rae <srae@broadcom.com>
* usb: eth: fix memalign() parameter orderStephen Warren2016-02-24-1/+1
| | | | | | | | | | The alignment and size were swapped, leading to malloc heap corruption. On my system, this sometimes caused U-Boot to crash during or after certain USB Ethernet operations. Fixes: c8c2797c3810 ("dm: usb: eth: Support driver model with USB Ethernet") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: usb: f_dfu: Set deferred call for dfu_flush() functionLukasz Majewski2016-02-24-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes situation when one would like to write large file into medium with the file system (fat, ext4, etc). This change sets file size limitation to the DFU internal buffer size. Since u-boot is not supporting interrupts and seek on file systems, it becomes challenging to store large file appropriately. To reproduce this error - create large file (around 26 MiB) and sent it to the target board. Lets examine the flow of USB transactions: 0. DFU uses EP0 with 64B MPS [Max Packet Size] 1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions 2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent from target board - IN transaction (target->PC) 3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero Length Packet] Now the interesting part starts: 4. OUT (PC->target) Setup transaction (request to share DFU state) 5. IN (target->PC) - reply the current DFU state - In the UDC driver the req->completion (with dfu_flush) is called after successful IN transfer. - The dfu_flush() (called from req->completion callback) saves the whole file at once (u-boot doesn't support seek on fs). Such operation takes considerable time. When the file is large - e.g. 26MiB - this time may be more than 5 seconds. 6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush() writes data to eMMC memory. The dfu-util application has hard coded timeout on USB transaction completion set to 5 seconds (it uses libusb calls). When the file to store is large (e.g. 26 MiB) the time needed to write it may excess the dfu-util timeout and following error message will be displayed: "unable to read DFU status" on the HOST PC console. This change is supposed to leverage DFU's part responsible for storing files on file systems. Other DFU operations - i.e. raw/partition write to NAND and eMMC should work as before. The only functional change is the error reporting. When dfu_flush() fails the u-boot prompt will exit with error information and dfu-util application exits afterwards as well. Test HW: - Odroid XU3 (Exynos5433) - test with large file - Trats (Exynos4210) - test for regression - eMMC, raw, Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Heiko Schocher <hs@denx.de>
* usb: ehci: Be explicit about the BE IO accessorsMarek Vasut2016-02-24-2/+3
| | | | | | | | | | Add explicit cpu_to_be32()/be32_to_cpu() conversion to BE EHCI I/O accessors to align them with their LE counterpart. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
* usb: ehci: Clear USBMODE_BE on LE MMIOMarek Vasut2016-02-24-0/+2
| | | | | | | | | If the USB EHCI is configured for little endian MMIO, make sure to clear the USBMODE_BE flag from the USBMODE register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
* usb: ehci: Implement V2P mappingMarek Vasut2016-02-24-10/+9
| | | | | | | | | | | | Certain processor architectures, like MIPS, require that the USB structures and transfer buffers are passed with their PA to the USB controller. If VA is passed, the USB will not work. Add the necessary virt_to_phys() calls into the USB EHCI code to make it work. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
* usb: ehci: Use map_physmem in ehci-genericMarek Vasut2016-02-24-1/+3
| | | | | | | | | Some architectures, like MIPS, require remapping of the registers. Add the map_physmem() call to handle it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
* sunxi: H3: Add support for the host usb-physJelle van der Waa2016-02-23-16/+16
| | | | | | | | Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* drivers: usb: ohci-at91: clean up the PLLB codeWenyou Yang2016-02-18-15/+7
| | | | | | | | | Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Heiko Schocher <hs@denx.de>
* drivers: usb: atmel: clean up the UTMI PLL codeWenyou Yang2016-02-18-47/+11
| | | | | | | | | Due to introducing the new UTMI PLL clock handle functions, use these function to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* drivers: at91: clean up peripheral clock codeWenyou Yang2016-02-18-24/+4
| | | | | | | | | | Due to introducing the new peripheral clock handle functions, use these functions to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> [fixup for missing clk.h in at91_emac.c] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* usb: remove UniPhier EHCI driverMasahiro Yamada2016-02-14-83/+0
| | | | | | | | | | Now, all this driver does can be covered by the generic EHCI driver (drivers/usb/host/ehci-generic.c). UniPhier SoCs have switched to use it. Delete this driver rather than bothering to convert it to Driver Model. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-6/+6
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* usb: gadget: dwc2_udc_otg: modified the check condition for max packet size ↵Frank Wang2016-02-04-2/+2
| | | | | | | | | | | | | of ep_in in high speed In current high speed fastboot, fs_ep_in.wMaxPacketSize is configured 64 bytes as default, as a result, it failed to match the size at initialization stage in usb controller. Actually, hardware can support less than or equal to 512 bytes in high speed mode, so I changed the condition from '!=' to '>' to fix this issue. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Tested-by: Steve Rae <srae@broadcom.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-01-25-100/+3291
|\
| * usb: add clock support for generic EHCIMasahiro Yamada2016-01-25-0/+14
| | | | | | | | | | | | | | This driver is designed in a generic manner, so clocks should be handled genericly as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * usb: eth: add Realtek RTL8152B/RTL8153 DRIVERTed Chen2016-01-23-0/+3075
| | | | | | | | | | | | | | | | | | | | | | This patch adds driver support for the Realtek RTL8152B/RTL8153 USB network adapters. Signed-off-by: Ted Chen <tedchen at realtek.com> [swarren, fixed a few compiler warnings] [swarren, with permission, converted license header to SPDX] [swarren, removed printf() spew during probe()] Signed-off-by: Stephen Warren <swarren at nvidia.com>
| * usb: dwc2: Do not mix data toggle for IN and OUT endpoints, check boundsStefan Brüns2016-01-23-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | USB protocol allows for 16 IN and 16 OUT endpoints (USB 2.0 Spec, 8.3.2.2 Endpoint Field). A function may have an EP 1 for both IN and OUT, so these two should be kept separate. As EPs are either BULK or INTERRUPT (or ISO), it is fine to have one array per direction for all transfer types (also see e236519b7365ef75c5da6a5623f0b03d9c00cfae). USB device address is 7 bits, so a bus may have more than 16 devices. Check the device number, as the DWC2 driver only supports BULK/ISO for the first 16 devices. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: Add SPLIT INTERRUPT transaction supportStefan Brüns2016-01-23-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CSPLITs for INTERRUPT transactions have to be scheduled in each microframe following the SSPLIT. INTERRUPT transfers are executed in the next even/ odd microframe depending on the HCCHAR_ODDFRM flag. As there are no handshakes for INTERRUPT SSPLITs the SSPLIT may have failed (transport error) without the error being detected by the host driver. If the last CSPLIT is not received within 4 microframes after the SSPLIT there was a transaction error and the complete transaction has to be restarted. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: Implement SPLIT transaction supportStefan Brüns2016-01-23-15/+66
| | | | | | | | | | | | | | | | | | In contrast to non-SPLIT transfers each transaction has to be submitted as an individual chunk. The transaction state machine proceeds from SSPLIT to CSPLIT if the ACK flag is set. CSPLIT has to be repeated while NYET is set. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: add helper function for setting SPLIT HC registersStefan Brüns2016-01-23-1/+14
| | | | | | | | | | | | | | The split register setting is used for both SSPLIT and CSPLIT transactions, the bit for CSPLIT has to be set seperately. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: split transfer core from outer loopStefan Brüns2016-01-23-48/+64
| | | | | | | | | | | | | | | | Split the movement of data between CPU and Host Controller from the status handling and tracking of transfer progress. This will also simplify adding of SPLIT transaction support. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: Simplify wait_for_chhltd(), remove ignore_ackStefan Brüns2016-01-23-23/+17
| | | | | | | | | | | | | | | | | | | | | | | | A transfer is completed if the XFERCOMP flag is set, irrespective of the ACK flag. BULK OUT transfers to some HS devices complete without having the ACK flag set, which signal the devices has responded with an NYET to the transfer (PING protocol). The new behaviour matches the Linux kernel minus any PING protocol. Also see 5966defabdcc (usb: dwc2: fix bulk transfers) Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
| * usb: dwc2: Fix out-of-bounds access, fix chunk sizeStefan Brüns2016-01-23-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix two errors in transfer len calculation, move loop invariant code out of loop. If xfer_len is equal to CONFIG_DWC2_MAX_TRANSFER_SIZE (or slightly smaller), the xfer_len will be to large, e.g.: xfer_len = MAX_TRANSFER_SIZE = 65535 max packet size = 512 => num_packets = 128 => IN xfer_len = 65536 For OUT transactions larger than (65536 - mps) bytes, the xfer_len determination is quite awkward, it is only correct due to: - max_packet_size for control/bulk/interrupt is required to be power-of-two. - (CONFIG_DWC2_MAX_TRANSFER_SIZE + 1) % max-packet-size is zero for all allowed (2^3 ... 2^9) packet sizes As the max xfer len is loop invariant, it can be moved out of the loop. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
* | bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada2016-01-25-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | usb: ehci-mx6: Use shared wait_for_bitMateusz Kulikowski2016-01-25-28/+4
| | | | | | | | | | | | Use existing library function to poll bit(s). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* | usb: ohci-lpc32xx: Use shared wait_for_bitMateusz Kulikowski2016-01-25-27/+7
| | | | | | | | | | | | | | Use existing library function to poll bit(s). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* | usb: dwc2: Use shared wait_for_bitMateusz Kulikowski2016-01-25-28/+13
| | | | | | | | | | | | Use existing library function to poll bit(s). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* | dm: usb: Add a compatible string for PCI EHCI controllerSimon Glass2016-01-24-0/+6
|/ | | | | | | | | Add a compatible string to allow this to be specified in the device tree if needed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-383/+24
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: host: ehci-vf: Implement board_usb_phy_mode weak functionSanchayan Maity2016-01-16-0/+10
| | | | | | | | | | Add board_usb_phy_mode weak function on similar lines to ehci-mx6. However since Vybrid USB does not have a true OTG, make this weak functon just return 0. The function is supposed to be implemented by the individual boards using a GPIO for providing the OTG pin functionality. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* usb: host: ehci-vf: Remove hardcoded USB host client configurationSanchayan Maity2016-01-16-5/+0
| | | | | | | | The current ehci-vf USB driver for Vybrid hardcodes the USB host and client functionality. Remove this. Reported-by: Santhosh Kumar Janardhanam <santhosh.kj@hcl.com> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* usb:ci_udc: Remove ULPI setting for i.MX OTG controllerYe.Li2016-01-16-11/+3
| | | | | | | | | All the i.MX6, i.MX23 and i.MX28 OTG controllers only support UTMI interface. Set to ULPI is not correct, even the controller will reject this setting in PORTSC register. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-14-3/+3
| | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* ums: support multiple LUNs at onceStephen Warren2016-01-13-13/+16
| | | | | | | | | | | | | | | Extend the ums command to accept a list of block devices. Each of these will be exported as a separate LUN. An example use-case would be: ums 0 mmc 0,0.1,0.2 ... which would export LUNs for eMMC 0's user data, boot0, and boot1 HW partitions. This is useful since it allows the host access to everything on the eMMC without having to somehow stop the ums command from executing and restart it with different parameters. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* dm: net: usb: Convert mcs7830 driver to support driver modelSimon Glass2016-01-12-0/+105
| | | | | | | Adjust this driver to support driver model for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: net: usb: Refactor mcs7830 driver ready for DM conversionSimon Glass2016-01-12-121/+144
| | | | | | | | | Remove stamp data and create common functions for the main Ethernet operations. This will make it easier to convert this driver to support driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: usb: Convert echi-pci to use new DM PCI APISimon Glass2016-01-12-12/+39
| | | | | | | | Convert this driver to use the new driver model PCI API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* dm: pci: Add a dm_ prefix to pci_get_bdf()Simon Glass2016-01-12-1/+1
| | | | | | | | | | | | Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_get_bdf() accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* usb: musb: Fix hub port setting for SPLIT transactionsStefan Brüns2015-12-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The ifdef'ed Linux kernel code uses the 1 based port number, whereas U-Boot puts a 0 based port number into the register. The reason the 0 based port number apparently works can probably be taken from the USB 2.0 spec: 8.4.2.2 Start-Split Transaction Token ... The host must correctly set the port field for single and multiple TT hub implementations. A single TT hub implementation *may ignore* the port field. Actually, as far as I understand, a multi TT hub defaults to single TT (bAlternateSetting: 0) until switched via SetInterface, so even "port 42" would work. The change was verified by hardcoding the port number to a wrong value, SPLIT transactions kept working (although using a DWC2 instead of MUSB). Tested hubs are the RPi onboard SMC9514 and an external "05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB". The former is a multi TT hub, the latter single TT only. Addendum: Tested on sunxi/MUSB by Hans de Goede Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
* usb: Move determination of TT hub address/port into separate functionStefan Brüns2015-12-31-101/+12
| | | | | | | | | | | | | Start split and complete split tokens need the hub address and the downstream port of the first HS hub (device view). The core of the function was duplicated in both host/ehci_hcd and musb-new/usb-compat.h. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
* usb: dwc2: avoid out of bounds accessStefan Brüns2015-12-31-3/+4
| | | | | | | | | | flush_dcache_range may access data after priv->aligned_buffer end if len > DWC2_DATA_BUF_SIZE. memcpy may access data after buffer end if done > 0 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* usb: add support of generic OHCI devicesAlexey Brodkin2015-12-17-0/+54
| | | | | | | | | | | This driver is meant to be used with any OHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
* usb: host: ehci: samsung: Move hcor initialization after usb phy setupLukasz Majewski2015-12-17-2/+2
| | | | | | | | | | | | | With the old order of initialization the hcor pointer has been setup to the same address as Exynos EHCI base address (0x12110000 instead of 0x12110010). Such behaviour was caused by reading value of 0 instead of 0x10 from EHCI HCCPBASE register without doing proper clock initialization before. To fix this problem hcor initialization has been moved after USB PHY setup. Now ehci_readl(&ctx->hcd->cr_capbase) returns correct value. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.hMarek Vasut2015-12-17-3/+3
| | | | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the global s3c_udc.h header to dwc2_udc.h. The rename is done automatically: $ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \ `git grep "s3c_udc\.h" | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename s3c_udc_probe() functionMarek Vasut2015-12-17-1/+1
| | | | | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch is the second and final to rename global symbol, the s3c_udc_probe() function. The rename is done automatically: $ sed -i "s/s3c_udc_probe/dwc2_udc_probe/g" \ `git grep s3c_udc_probe | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-08 06:57:09 +0000