summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
* usb: ci_udc: terminate ep0 INs with a zlp when requiredStephen Warren2014-06-11-3/+35
| | | | | | | | | Sometimes, a zero-length packet is required at the end of an IN transaction so that the host knows the device is done sending data. Enhance ci_udc to send a zlp when necessary. See the comments for more details. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: clean up all allocations in unregisterStephen Warren2014-06-11-0/+6
| | | | | | | | | usb_gadget_unregister_driver() is called to tear down the USB device mode stack. Fix the driver to stop the USB HW (which causes any attached host to notice the disappearance of the device), and free all allocations (which obviously prevents memory leaks). Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: fix probe error cleanupStephen Warren2014-06-11-0/+1
| | | | | | | If allocation of the ep0 req fails, clean up all the allocations that were made in ci_udc_probe(). Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: fix freeing of ep0 reqStephen Warren2014-06-11-2/+7
| | | | | | | | | | | ci_ep_alloc_request() avoids allocating multiple request objects for ep0 by keeping a record of the first req allocated for ep0, and always returning that instead of allocating a new req. However, if this req is ever freed, the record of the previous allocation is not cleared, so ci_ep_alloc_request() will keep returning this stale pointer. Fix ci_ep_free_request() to clear the record of the previous allocation. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: call udc_disconnect() from ci_pullup()Stephen Warren2014-06-11-16/+12
| | | | | | | ci_pullup()'s !is_on path contains a cut/paste copy of udc_disconnect(). Remove the duplication by simply calling udc_disconnect() instead. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: complete ep0 direction handlingStephen Warren2014-06-01-7/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | handle_setup() currently assumes that the response to a Setup transaction will be an OUT transaction, and any subsequent packet (if any) will be an IN transaction. This appears to be valid in many cases; both USB enumeration and Mass Storage work OK with this restriction. However, DFU uses ep0 to transfer data in both directions. This renders the assumption invalid; when sending data from device to host, the Data Stage is an IN transaction, and the Status Stage is an OUT transaction. Enhance handle_setup() to deduce the correct direction for the USB transactions based on Setup transaction data. ep0's request object only needs to be automatically re-queued when the Data Stage completes, in order to implement the Status Stage. Once the Status Stage transaction is complete, there is no need to re-queue the USB request, so don't do that. Don't sent USB request completion callbacks for Status Stage transactions. These were queued by ci_udc itself, and only serve to confuse the USB function code. For example, f_dfu attempts to interpret the 0-length data buffers for Status Stage transactions as DFU packets. These buffers contain stale data from the previous transaction. This causes f_dfu to complain about a sequence number mismatch. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: pre-allocate ep0 reqStephen Warren2014-06-01-1/+17
| | | | | | | | | | | | | | | | | | | | Allocate ep0's USB request object when the UDC driver is probed. This solves a couple of issues in the current code: a) A request object always exists for ep0. Prior to this patch, if setup transactions arrived in an unexpected order, handle_setup() would need to reply to a setup transaction before any ep0 usb_req was created. This issue was introduced in commit 2813006fecda "usb: ci_udc: allow multiple buffer allocs per ep." b) handle_ep_complete no longer /has/ to queue the ep0 request again after every single request completion. This is currently required, since handle_setup() assumes it can find some request object in ep0's request queue. This patch doesn't actually stop handle_ep_complete() from always requeueing the request, but the next patch will. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: use a single descriptor for ep0Stephen Warren2014-06-01-11/+4
| | | | | | | | | ci_udc currently points ep->desc at separate descriptors for IN and OUT. These descriptors only differ in the ep address IN/OUT field. Modify the code to use a single descriptor, and change that descriptor's ep address to indicate IN/OUT as required. This removes some data duplication. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: ci_udc: detect queued requests on ep0Stephen Warren2014-06-01-0/+15
| | | | | | | | | | | | The flipping of ep0 between IN and OUT relies on ci_ep_queue() consuming the current IN/OUT setting immediately. If this is deferred to a later point when the req is pulled out of ci_req->queue, then the IN/OUT setting may have been changed since the req was queued, and state will get out of sync. This condition doesn't occur today, but could if bugs were introduced later, and this error-check will save a lot of debugging time. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'Albert ARIBAUD2014-05-23-0/+105
|\
| * ARM: zynq: ehci: Added USB host driver supportMichal Simek2014-05-14-0/+105
| | | | | | | | | | | | | | Added USB host driver for zynq. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'pr-15052014' of git://git.denx.de/u-boot-usbTom Rini2014-05-22-69/+110
|\ \
| * | usb:gadget:f_thor: download_tail(): remove dfu_write with 0 sizePrzemyslaw Marczak2014-05-15-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dfu_flush() can write raw data, dfu_write() with zero size can be removed from download_tail() in thor gadget. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de>
| * | usb: ci_udc: parse QTD before over-writing itStephen Warren2014-05-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ci_udc only allocates a single QTD structure per EP. All data needs to be extracted from the DTD prior to calling ci_ep_submit_next_request(), since that fills the QTD with next transaction's parameters. Fix handle_ep_complete() to extract the transaction (remaining) length before kicking off the next transaction. In practice, this only causes writes to UMS devices to fail for me. I may have tested the final versions of my previous ci_udc patch only with reads. More recently, I had patches applied locally that allocated a QTD per USB request rather than per USB EP, although since that doesn't give any performance benefit, I'm dropping those. Fixes: 2813006fecda ("usb: ci_udc: allow multiple buffer allocs per ep") Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: tegra: support device modeStephen Warren2014-05-15-30/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few changes are made to the Tegra EHCI driver so that it can set everything up for device-mode operation on the first USB controller. This can be used in conjunction with ci_udc.c to operate as a USB device. Detailed changes are: * Rename set_host_mode() to set_up_vbus() since that's really what it does. * Modify set_up_vbus() to know whether it's initializing in host or device mode, and: - Skip the external VBUS check in device mode, since external VBUS is expected in this case. - Disable VBUS output in device mode. * Modify init_phy_mux() to know whether it's initializing in host or device mode, and hence skip setting USBMODE_CM_HC (which enables host mode) in device mode. See the comments in that function for why this is safe w.r.t. the ordering requirements of PHY selection. * Modify init_utmi_usb_controller() to force "b session valid" in device mode, since the HW requires this. This is done in UTMI-specific code, since we only support device mode on the first USB controller, and that controller can only talk to a UTMI PHY. * Enhance ehci_hcd_init() to error-check the requested host-/device-mode vs. the dr_mode (dual-role mode) value present in device tree, and the HW configurations which support device mode. * Enhance ehci_hcd_init() not to skip HW initialization when switching between host and device mode on a controller. This requires remembering which mode the last initialization used. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: tegra: refactor PHY type selectionStephen Warren2014-05-15-30/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both init_{utmi,ulpi}_usb_controller() have nearly identical code for PHY type selection. Pull this out into a common function to remove the duplication. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: tegra: fix PHY selection codeStephen Warren2014-05-15-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TRM for Tegra30 and later all state that USBMODE_CM_HC must be set before writing to hostpc1_devlc to select which PHY to use for a USB controller. However, neither init_{utmi,ulpi}_usb_controller() do this today, so the register writes they perform for PHY selection do not work. For the UTMI case, this was hacked around in commit 7e44d9320ed4 "ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114" by adding code to ehci_hcd_init() which sets USBMODE_CM_HC and duplicates the PHY selection register write. This code doesn't cover the ULPI case, so I wouldn't be surprised if ULPI doesn't work with the current code, unless the ordering requirement only ends up being an issue in HW for UTMI not ULPI. This patch fixes init_{utmi,ulpi}_usb_controller() to correctly set USBMODE_CM_HC before selecting the PHY. Now that this works, we can remove the duplicate UTMI-specific code in ehci_hcd_init(), thus simplifying that function. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | Merge remote-tracking branch 'u-boot/master' into testMarek Vasut2014-05-15-4/+24
| |\ \ | | |/
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-05-22-74/+659
|\ \ \ | |/ /
| * | dfu, nand: add medium specific polltimeout functionHeiko Schocher2014-05-08-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add a possibility to add a medium specific polltimeout function. So it is possible to define different poll timeouts. Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT only on nand ubi partitions, which is currently the only usecase. Change-Id: If1db5f49b32d93fefa7481e8dfe5b7ccc0e65af4 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * | musb-new, dfu: first send request answer then call completionsHeiko Schocher2014-05-08-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | comment in ep0_txstate() states: "report completions as soon as the fifo's loaded; there's no win in waiting till this last packet gets acked". This is wrong for using dfu. In the dfu usecase we must send a PollTimeout to the host, so the host can wait until the U-Boot Code is ready for answering new usb requests. So the answer which contains the PollTimeout must send *before* U-Boot calls req->complete. The req->complete is used in the dfu case for flushing the medium, when entering DFU_STATE_dfuMANIFEST_SYNC state. Change-Id: Ib2941119c72761e48e15fedbdad1ecce07ae0b3d Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * | usb/gadget: add the fastboot gadgetSebastian Siewior2014-05-08-0/+514
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains an implementation of the fastboot protocol on the device side and documentation. This is based on USB download gadget infrastructure. The fastboot function implements the getvar, reboot, download and reboot commands. What is missing is the flash handling i.e. writting the image to media. v3 (Rob Herring): This is based on http://patchwork.ozlabs.org/patch/126798/ with the following changes: - Rebase to current mainline and updates for current gadget API - Use SPDX identifiers for licenses - Traced the history and added missing copyright to cmd_fastboot.c - Use load_addr/load_size for transfer buffer - Allow vendor strings to be optional - Set vendor/product ID from config defines - Allow Ctrl-C to exit fastboot mode v4: - Major re-write to use the USB download gadget. Consolidated function code to a single file. - Moved globals into single struct. - Use puts and putc as appropriate. - Added CONFIG_USB_FASTBOOT_BUF_ADDR and CONFIG_USB_FASTBOOT_BUF_SIZE to set the fastboot transfer buffer. v5: - Add CONFIG option documentation to README - Rebase using new downloader registration Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
| * | usb: ums: remove ci_udc special caseStephen Warren2014-05-07-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Now that the ci_udc driver supports allocating multiple requests per endpoint, we can revert the special-case added by a022c1e13c01 "usb: ums: use only 1 buffer for CI_UDC". Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: ci_udc: allow multiple buffer allocs per epStephen Warren2014-05-07-65/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify ci_ep_alloc_request() to return a dynamically allocated request object, rather than a singleton that's part of the endpoint. This requires moving various state from the endpoint structure to the request structure, since we need one copy per request. The "fast bounce buffer" b_fast is removed by this change rather than moved to the request object. Instead, we enhance the bounce buffer logic in ci_bounce()/ci_debounce() to keep the bounce buffer around between request submissions. This avoids the need to allocate an arbitrarily- sized bounce buffer up-front, yet avoids incurring the allocation overhead each time a request is submitted. A future enhancement would be to actually submit multiple requests to HW at once. The Linux driver shows that this is possible. That might improve throughput (depending on the USB protocol in use), since USB could be performing a transfer to one HW buffer in parallel with whatever SW actions U-Boot performs on another buffer. However, I have not made this change as part of this patch, in order to keep SW changes related to buffer management separate from any change in the way the HW is programmed. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | | drivers/usb : Define usb control register mask for w1c bitsNikhil Badola2014-05-16-5/+10
| |/ |/| | | | | | | | | | | | | | | | | Define and use CONTROL_REGISTER_W1C_MASK to make sure that w1c bits of usb control register do not get reset while writing any other bit Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-94/+341
|\ \ | |/ | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * USB: gadget: save driver name before registering itStephen Warren2014-05-05-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | g_dnl_register() currently first attempts to register a composite driver by name, and then saves the driver name once it's registered. Internally to the registration code, g_dnl_do_config() is called and attempts to compare the composite device's name with the list of known device names. This fails since the composite device's name has not yet been stored. This means that the first time "ums 0 0" is run, it fails, but subsequent attempts succeed. Re-order the name-saving and registration code to solve this. Fixes: e5b834e07f51 ("USB: gadget: added a saner gadget downloader registration API") Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * USB: gadget: added a saner gadget downloader registration APIMateusz Zalega2014-05-05-36/+36
| | | | | | | | | | | | | | | | | | | | Preprocessor definitions and hardcoded implementation selection in g_dnl core were replaced by a linker list made of (usb_function_name, bind_callback) pairs. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
| * usb: dfu: fix boards wo USB cable detectionMateusz Zalega2014-05-05-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Former usb_cable_connected() patch broke compilation of boards which do not support this feature. I've renamed usb_cable_connected() to g_dnl_usb_cable_connected() and added its default implementation to gadget downloader driver code. There's only one driver of this kind and it's unlikely there'll be another, so there's no point in keeping it in /common. Previously this function was declared in usb.h. I've moved it, since it's more appropriate to keep it in g_dnl.h - usb.h seems to be intended for USB host implementation. Existing code, confronted with default -EOPNOTSUPP return value, continues as if the cable was connected. CONFIG_USB_CABLE_CHECK was removed. Change-Id: Ib9198621adee2811b391c64512f14646cefd0369 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: gadget: allow ci_udc to build with new gadget frameworkStephen Warren2014-05-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow ci_udc.o to be built when using the new(?) USB gadget framework, as enabled by CONFIG_USB_GADGET. Note that this duplicates the Makefile entry for ci_udc.o, since it's also included inside #ifdef CONFIG_USB_ETHER. I'm not sure what that define means; perhaps an old style of Ethernet-specific USB gadget implementation? I wonder if the line that this patch adds shouldn't be outside all of the ifdefs, so it stands on its own, similar to how e.g. epautoconf.o is shared between the two? Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * usb: ums: use only 1 buffer for CI_UDCStephen Warren2014-04-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ci_udc.c allocates only a single buffer for each endpoint, which ci_ep_alloc_request() returns as a hard-coded value rather than dynamically allocating. Consequently, storage_common.c must limit itself to using a single buffer at a time. Add a special case to the definition of FSG_NUM_BUFFERS for this. Another option would be to fix ci_ep_alloc_request() to dynamically allocate the buffers like some/all(?) other device mode drivers do. However, I don't think that ci_ep_queue() supports queueing up multiple buffers either yet, and I'm not familiar enough with the controller yet to implement that. As such, any attempt to use multiple buffers simply results in data corruption and other errors. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * usb: ci_udc: support variants with hostpc registerStephen Warren2014-04-30-18/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra's USB controller appears to be a variant of the ChipIdea controller; perhaps derived from it, or simply a different version of the IP core to what U-Boot supports today. In this variant, at least the following difference are present: - Some registers are moved about. - Setup transaction completion is reported in a separate 'epsetupstat' register, rather than in 'epstat' (which still exists, perhaps for other transaction types). - USB connection speed is reported in a separate 'hostpc1_devlc' register, rather than 'portsc'. - The registers used by ci_udc.c begin at offset 0x130 from the USB register base, rather than offset 0x140. However, this is handled by the associated EHCI controller driver, since the register address is stored in controller.ctrl->hcor. Introduce define CONFIG_CI_UDC_HAS_HOSTPC to indicate which variant of the controller should be supported. The "HAS_HOSTPC" part of this name mirrors the similar "has_hostpc" field used by the Linux EHCI controller core to represent the presence/absence of the hostpc1_devlc register. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * usb: ci_udc: make PHY initialization conditionalStephen Warren2014-04-30-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_gadget_register_driver() currently unconditionally programs PORTSC to select a ULPI PHY. This is incorrect on at least the Tegra boards I am testing with, which use a UTMI PHY for the OTG ports. Make the PHY selection code conditional upon the specific EHCI controller that is in use. Ideally, I believe that the PHY initialization code should be part of ehci_hcd_init() in the relevant EHCI controller driver, or some board- specific function that ehci_hcd_init() calls. For MX6, I'm not sure this PHY initialization code is correct even before this patch, since ehci-mx6's ehci_hcd_init() already configures PORTSC to a board-specific value, and it seems likely that the code in ci_udc.c is incorrectly undoing this. Perhaps this is not an issue if the PHY selection register bits aren't implemented on this instance of the MX6 USB controller? ehci-mxs.c doens't appear to touch PORTSC, so this code is likely still required there. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * usb: ci_udc: set ep->req.actual after transferStephen Warren2014-04-30-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least drivers/usb/gadget/storage_common.c expects that ep->req.actual contain the number of bytes actually transferred. (At least in practice, I observed it failing to work correctly unless this was the case). However, ci_udc.c modifies ep->req.length instead. I assume that .length is supposed to represent the allocated buffer size, whereas .actual is supposed to represent the actual number of bytes transferred. In the OUT transaction case, this may happen simply because the host sends a smaller packet than the max possible size, which is quite legal. In the IN case, transferring fewer bytes than requested could presumably happen as an error. Modify handle_ep_complete() to write to .actual rather than modifying .length. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * usb: ci_udc: Support larger packetsStephen Warren2014-04-30-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | ci_ep_queue() currently only fills in the page0/page1 fields in the queue item. If the buffer is larger than 4KiB (unaligned) or 8KiB (page-aligned), then this prevents the HW from knowing where to write the balance of the data. Fix this by initializing all 5 pageN pointers, which allows up to 16KiB (potentially non-page-aligned) buffers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DTandrey.konovalov@linaro.org2014-04-30-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4a271cb1b4ff doesn't take into account that fdtdec_setup_gpio() returns success when the gpio passed to it is FDT_GPIO_NONE (no gpio node found in the fdtdec_decode_gpio() call). This results in calling gpio_direction_output() on invalid gpio. For this reason executing "usb start" command on Arndale causes data abort in the ehci-exynos driver. Add the fdt_gpio_isvalid() check to fix that problem. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb: musb: fill in usb_gadget_unregister_driverRob Herring2014-04-30-1/+4
| | | | | | | | | | | | | | | | Add missing missing disconnect and unbind calls to the musb gadget driver's usb_gadget_unregister_driver function. Otherwise, any gadget drivers fail to uninitialize and run a 2nd time. Signed-off-by: Rob Herring <robh@kernel.org>
| * usb: handle NULL table in usb_gadget_get_stringRob Herring2014-04-30-0/+3
| | | | | | | | | | | | | | | | | | | | Allow a NULL table to be passed to usb_gadget_get_string for cases when a string table may not be populated. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb:gadget:f_thor: fix write to filesystem by add dfu_flush()Przemyslaw Marczak2014-04-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dfu read/write operations needs to be flushed manually, writing to filesystem on MMC by thor was broken. MMC raw write actually is working fine because current dfu_flush() function writes filesystem only. This commit adds dfu_flush() to f_thor and now filesystem write is working. This change was tested on Trats2 board. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| * usb:gadget:f_thor: code cleanup in function download_tail()Przemyslaw Marczak2014-04-30-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | In thor's download_tail() function, dfu_get_entity() is called before each dfu_write() call and the returned entity pointers are the same. So dfu_get_entity() can be called just once and this patch changes this. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| * usb: Add endian support macros to interrupt transfers in the EHCI driver.Adrian Cox2014-04-30-25/+31
| | | | | | | | | | | | Update the EHCI driver to support interrupt transfers on PowerPC. Signed-off-by: Adrian Cox <adrian@humboldt.co.uk>
| * usb: ehci: rmobile: Add support ehci host driver of rmobile SoCsNobuhiro Iwamatsu2014-04-30-0/+131
| | | | | | | | | | | | | | | | The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0Nikhil Badola2014-04-22-0/+20
| | | | | | | | | | | | | | | | | | | | | | Increase TXFIFOTHRES field value in TXFILLTUNING register of usb for T4 Rev 2.0. This decreases data burst rate with which data packets are posted from the TX latency FIFO to compensate for latencies in DDR pipeline during DMA. This avoids Tx buffer underruns and leads to successful usb writes Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * fsl/usb: Workaround for USB erratum-A007075Nikhil Badola2014-04-22-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Put a delay of 5 millisecond after reset so that ULPI phy gets enough time to come out of reset. Erratum A007075 applies to following SOCs and their variants, if any P1010 rev 1.0 B4860 rev 1.0, 2.0 P4080 rev 2.0, 3.0 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * fsl/usb: Fix phy type for Second USB controllerNikhil Badola2014-04-22-2/+6
| | | | | | | | | | | | | | | | | | Set correct phy_type value for second USB controller. This is required for supporting SOCs having 2 USB controllers working simultaneously, one with UTMI phy and other with ULPI phy Signed-off-by: Nikhil Badola <B46172@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | usb: tegra: combine header fileStefan Agner2014-04-17-1/+0
| | | | | | | | | | | | | | | | | | | | | | Combine the Tegra USB header file into one header file for all SoCs. Use ifdef to account for the difference, especially Tegra20 is quite different from newer SoCs. This avoids duplication, mainly for Tegra30 and newer devices. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | usb: tegra: fix PHY configurationStefan Agner2014-04-17-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tegra30 and later, the PTS (parallel transceiver select) and STS (serial transceiver select) are part of the HOSTPC1_DEVLC_0 register rather than PORTSC1_0 register. Since the reset configuration usually matches the intended configuration, this error did not show up on Tegra30 devices. Also use the slightly different bit fields of first USB, (USBD) on Tegra20 and move those definitions to the Tegra20 specific header file. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | usb: tegra: fix USB2 powerdown for Tegra30 and laterStefan Agner2014-04-17-0/+3
|/ | | | | | | | | | | | Clear the forced powerdown bit in the UTMIP_PLL_CFG2_0 register which brings USB2 in UTMI mode to work. This was clearly missing since the forced powerdown bit is set in reset by default for all USB ports. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: dfu: introduce dfuMANIFEST stateHeiko Schocher2014-03-23-6/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on nand flash using ubi, after the download of the new image into the flash, the "rest" of the nand sectors get erased while flushing the medium. With current u-boot version dfu-util may show: Starting download: [##################################################] finished! state(7) = dfuMANIFEST, status(0) = No error condition is present unable to read DFU status as get_status is not answered while erasing sectors, if erasing needs some time. So do the following changes to prevent this: - introduce dfuManifest state According to dfu specification ( http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ) section 7: "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation of the status report by the host. Upon receipt of the anticipated DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it completes its reprogramming operations." - when stepping into dfuManifest state, sending a PollTimeout DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host (dfu-util) waits the PollTimeout before sending a get_status again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* usb: net: introduce support for Moschip USB ethernetGerhard Sittig2014-03-12-0/+820
| | | | | | | | | | | | | | | introduce an 'mcs7830' driver for Moschip MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices see "MCS7830 -- USB 2.0 to 10/100M Fast Ethernet Controller" at http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=109;74;109 the driver was implemented based on the U-Boot Asix driver with additional information gathered from the Moschip Linux driver, development was done on "Delock 61147" and "Logilink UA0025C" dongles Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-06 09:23:32 +0000