summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
...
* usb: move CONFIG_USB_XHCI to Kconfig with renamingMasahiro Yamada2016-06-04-7/+1
| | | | | | | | | | | | | | | | | Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* usb: phy: omap_usb_phy: Fix USB3_PHY DPLL configurationRoger Quadros2016-06-02-15/+41
| | | | | | | | | | The index returned by get_sys_clk_index() is not exactly what we expect. Let's not rely on that and use get_sys_clk_freq() instead. This fixes missing USB3 devices in the Linux kernel when USB is started in u-boot. It still doesn't fix missing USB3 devices in u-boot though. Signed-off-by: Roger Quadros <rogerq@ti.com>
* usb: dwc3: Makefile: Don't build gadget code if USB_GADGET is disabledRoger Quadros2016-05-27-1/+1
| | | | | | | It is pointless to build gadget driver if USB_GADGET is disabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de>
* drivers: usb: common: add common code for usb drivers to useMugunthan V N2016-05-17-0/+41
| | | | | | | Add common usb code which usb drivers makes use of it. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: gadget: dfu: discard dead codePeng Fan2016-05-06-9/+1
| | | | | | | | | | | | | | Reported by Coverity: Logically dead code (DEADCODE) dead_error_line: Execution cannot reach this statement: (f_dfu->strings + --i).s = .... If calloc failed, i is still 0 and no need to call free, so discard the dead code. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: "Łukasz Majewski" <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb: dwc2: Add delay to fix the USB detection problem on SoCFPGAStefan Roese2016-05-06-0/+9
| | | | | | | | | | | | | | | | | | With patch c998da0d (usb: Change power-on / scanning timeout handling), the USB scanning is started earlier and with a smaller timeout. This resulted on SoCFPGA (using the DWC2 driver) in some USB sticks not getting detected any more. This patch now adds a 1 second delay (in the host mode only) to the DWC2 driver before the scanning is started. With this delay, now all problematic USB keys are detected successfully again. And there is no need any more to change the delay / timeout in the common USB code (usb_hub.c). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de>
* usb: ehci-mx6: allow board_ehci_hcd_init to failStefan Agner2016-05-06-2/+5
| | | | | | | | | | | There could be runtime determined board specific reason why a EHCI initialization fails (e.g. ENODEV if a Port is not available). In this case, properly return the error code. While at it, that function (board_ehci_hcd_init) has actually two documentation blocks... Use the correct function name for the documentation block of board_usb_phy_mode. Signed-off-by: Stefan Agner <stefan@agner.ch>
* usb: dwc2: Init desc_before_addrMarek Vasut2016-05-03-0/+3
| | | | | | | | | | | Initialize desc_before_addr, otherwise the USB core won't send the first 64B Get Device Descriptor request in common/usb.c function usb_setup_descriptor() . There are some USB devices which expect this sequence and otherwise can misbehave. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Tom Rini <trini@konsulko.com>
* usb: dwc2: Make OC protection configurableMarek Vasut2016-05-03-3/+14
| | | | | | | | | | Introduce a new flag in the controller private data, which allows selectively disabling the OC protection. Use the standard 'disable-over-current' OF prop to set this flag. This OC protection must be disabled on EBV SoCrates rev 1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* usb: dwc2: Pull Ext VBUS macro from dwc_otg_core_init()Marek Vasut2016-05-03-7/+14
| | | | | | | | | | | Introduce a boolean flag in the dwc2 controller private data and set it according to the macro (for now) instead of having this macro directly in the dwc_otg_core_init(). This will let us configure the flag from DT or such later on, if needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* usb: dwc2: Pass private data into dwc_otg_core_init()Marek Vasut2016-05-03-2/+3
| | | | | | | | | | Pass the whole bulk of private data instead of just the regs, since the private data will soon contain important configuration flags. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* Fix spelling of "occurred".Vagrant Cascadian2016-05-02-4/+4
| | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: s3c-otg: Fix remaining bytes in debug messagesRoger Quadros2016-04-25-2/+2
| | | | | | | | | | Remaining bytes means bytes that are not yet transferred and not the bytes that were transferred in the last transfer. Reported-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm28155_ap board]
* usb: s3c-otg: Fix short packet for request size > ep.maxpacketRoger Quadros2016-04-25-1/+1
| | | | | | | | | | | | | | Request size can be greater than ep.packet and still end in a short packet. We need to tackle this case as end of transfer (if short_not_ok is not set) as indicated in USB 2.0 Specification [1], else we get stuck up on certain protocols like fastboot. [1] - USB2.0 Specification, Section 5.3.2 Pipes Reported-by: Steve Rae <steve.rae@broadcom.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <steve.rae@broadcom.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* fastboot: Clean up bulk-out logicRoger Quadros2016-04-25-27/+23
| | | | | | | | Just use ep->maxpacket to get the maxpacket size and simplify the bulk-out maxpacket alignment. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com>
* fastboot: Enable the respective speed endpoints at runtimeRoger Quadros2016-04-25-7/+17
| | | | | | | | | | In a dual speed configuration we need to check at runtime if we want to enable the Full-Speed or High-Speed endpoint. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
* fastboot: Fix wMaxPacketSize for High-Speed IN endpointRoger Quadros2016-04-25-9/+27
| | | | | | | | | | | | | | wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64. While fixing that we do some clean ups like - use cpu_to_le16(decimal_length) instead of hexadecimal length. - No need to initialize bInterval to 0. Static variables are 0 initialized. - Move descriptor setting from fastboot_add to to fastboot_bind. - check for dual speed configuration before setting the high speed descriptors. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
* usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko2016-04-20-1/+14
| | | | | | And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-20-0/+17
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-20-0/+10
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-20-0/+23
| | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko2016-04-20-0/+6
| | | | | | | While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-20-0/+37
| | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to KconfigSam Protsenko2016-04-20-0/+21
| | | | | | | | | | | The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* USB: g_dnl: Change device classJohn Tobias2016-04-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan). But, not in OS X (Yosemite). By applying the said patch, it extends the ums support. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid XU3 (./test/py UMS + DFU tests) Tested-by: John Tobias <john.tobias.ph@gmail.com> Linux: - Run ums to expose all my eMMC partition - shows all correctly - Run ums to expose only 1 partition of my eMMC - show correctly Windows: - Run ums to expose all my eMMC partition - it detects but it prompts, if I want to format it (due to a non windows partition) - Run ums to expose only the FAT32 partition - it show the partition correctly.
* sunxi: H3: Do not clear usb companion clk-gate / reset on removeHans de Goede2016-04-12-6/+14
| | | | | | | | | | | | | | | | | On the H3 we need to enable the clk and de-assert the reset of the companion to be able to talk to the actual usb host controller. Before this commit we were also disabling the companion clk-gate / asserting its reset on remove, causing the later remove callback of the companion itself to (sometimes) fail with: ERROR: USB HC reset timed out! This commit fixes this by not disabling the companion's clk-gate nor asserting its reset on remove. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* musb: Properly call musb_stop() on probe failureHans de Goede2016-04-10-1/+3
| | | | | | | musb_lowlevelinit(): if no device is plugged in / detected call musb_stop() to undo the preceding musb_start() call. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb: sunxi: Do not allocate musb struct multiple timesHans de Goede2016-04-10-4/+7
| | | | | | | | | | The probe function of the musb host driver can be called multiple times. The code assumes that it can save the pointer to the allocated musb struct in the driver model priv_auto_alloc data, but this data gets free-ed on a probe failure or on removal, so we must save the pointer elsewhere. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: bcm_udc_otg: enable clocksSteve Rae2016-04-10-0/+4
| | | | | | Turn on the USB OTG clocks. Signed-off-by: Steve Rae <srae@broadcom.com>
* drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_typeSriram Dash2016-04-10-11/+14
| | | | | | | Changes the return type of fdt_usb_get_node_type from char* to int Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci ↵Sriram Dash2016-04-10-16/+17
| | | | | | | | | controller Enables usb device-tree fixup code to incorporate xhci controller Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
* drivers:usb:common:fsl-dt-fixup: Remove code duplication for ↵Sriram Dash2016-04-10-43/+29
| | | | | | | | | | | fdt_usb_get_node_type Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to avoid code duplication. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Acked-by: Marek Vasut <marex@denx.de>
* drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common fileSriram Dash2016-04-10-195/+219
| | | | | | | | | Move usb device-tree fixup framework from ehci-fsl.c to common place so that it can be used by other drivers as well (xhci-fsl.c). Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: ehci-hcd: Fix crash when no ops are provided to ehci_register()Mateusz Kulikowski2016-04-10-2/+2
| | | | | | | | | | | This commit fixes crash on BananaPi (and possibly others) casued by 3f9f8a5b83f8aec40c9f4ee496046a695e333c45. Crash reason: When no ops were passed to ehci_register(), USB host driver caused NULL pointer dereference. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.Purna Chandra Mandal2016-04-10-1/+297
| | | | | | | | This driver adds support of PIC32 MUSB OTG controller as dual role device. It implements platform specific glue to reuse musb core. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
* drivers: remove writes{b,w,l,q} and reads{b,w,l,q}.Purna Chandra Mandal2016-04-10-7/+0
| | | | | | | Definition of writes{bwlq}, reads{bwlq} are now added into arch specific asm/io.h. So removing them from driver to fix re-definition error Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
* ehci: Add support for Qualcomm EHCIMateusz Kulikowski2016-04-01-0/+190
| | | | | | | | | | This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
* ehci-ci.h: drop generic USBCMD fieldsMateusz Kulikowski2016-04-01-2/+2
| | | | | | | | Use definitions from ehci.h instead. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
* usb: Rename ehci-fsl.h to ehci-ci.hMateusz Kulikowski2016-04-01-7/+7
| | | | | | | | | | | | | Most of ehci-fsl header describe USB controller designed by Chipidea and used by various SoC vendors. This patch renames it to a generic header: ehci-ci.h Contents of file are not changed (so it contains several references to freescale SoCs). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
* eth: asix88179: Print packet length properlyMateusz Kulikowski2016-04-01-1/+1
| | | | | | | | | Debug printf used '%u' to print size_t variable. This caused warnings on 64-bit machines. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: ulpi: Fix compile warning in read/write on 64-bit machines.Mateusz Kulikowski2016-04-01-2/+3
| | | | | | | | | | | | | | | | | | | ulpi_read and ulpi_write are used to read/write registers via ULPI bus. Code generates compilation warnings on 64-bit machines where pointer is cast to u32. This patch drops all but last 8 bits of register address. It is possible, because addresses on ULPI bus are 6- or 8-bit. It is not possible (according to ULPI 1.1 spec) to have more than 8-bit addressing. This patch should not cause regressions as all calls to ulpi_read/write use either structure pointer (@ address 0) or integer offsets cast to pointer - addresses requested are way below 8-bit range. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: ulpi: Add Kconfig options for ULPIMateusz Kulikowski2016-04-01-0/+35
| | | | | | | | | | | The following options can be now enabled via defconfig: - CONFIG_USB_ULPI - CONFIG_USB_ULPI_VIEWPORT - CONFIG_USB_ULPI_VIEWPORT_OMAP Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* ehci-hcd: Add init_after_resetMateusz Kulikowski2016-04-01-0/+7
| | | | | | | | | | | | Some host controllers need addidional initialization after ehci_reset() In non-dm implementation it is possible to use CONFIG_EHCI_HCD_INIT_AFTER_RESET. This patch adds similar option to ehci drivers using dm. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* smsc95xx: fix operation on 64-bit systemsStephen Warren2016-04-01-2/+2
| | | | | | | | | | | | smsc95xx_read_reg() should calculate sizeof(*data) not sizeof(data) since data is a pointer, and the value pointed at is being transferred over USB, not the value of the pointer. This fixes operation of the driver in 64-bit builds, such as the Raspberry Pi 3. Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* fastboot: allow retrieving fastboot variables from envRob Herring2016-04-01-2/+10
| | | | | | | | | | | | | | | | | | | | Some boards need to expose device specific variable through fastboot (to adpat the flashing script depending on hardware revision for example). Provide a way to expose custom fastboot variables. Note that all variables meant to be exposed through fastboot should be be prefixed with 'fastboot.', the variable should not exceed 32 bytes (including the prefix and the trailing '\0') and the variable content should fit in the response buffer (60 bytes excluding the 'OKAY' prefix and the trailing '\0'). Signed-off-by: Rob Herring <rob.herring@linaro.org> [Boris Brezillon: add a commit message] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Steve Rae <srae@broadcom.com>
* sunxi: ohci: Add A83T compatibleChen-Yu Tsai2016-03-31-0/+1
| | | | | | | | We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: ehci: Add A83T compatibleChen-Yu Tsai2016-03-31-0/+1
| | | | | | | | We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb: sunxi: Add support for A83TChen-Yu Tsai2016-03-31-1/+1
| | | | | | | | | | Like the Allwinner A33 SoC, the A83T is missing the config register from the musb USB DRD hardware block. Use a known working value for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: gadget: Move CONFIG_USB_GADGET to KconfigSam Protsenko2016-03-25-0/+37
| | | | | | | | | | | | | | The description was borrowed from kernel. "tristate" type was changed to "bool" (I believe we don't support modules for u-boot yet, right?). CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along as well. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Add zynq_zc702 conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
* sunxi: Fix 2nd usb controller on sun4i/sun7i no longer workingHans de Goede2016-03-23-5/+23
| | | | | | | | | | The 2nd usb controller on sun4i/sun7i has its base address 0x8000 bytes from the 1st one, rather then 0x1000. Also the ahb clk gates are interleaved with the ohci clk-gates introducing a hole between the clks for usb1 and usb2. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-07 23:56:50 +0000