summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
* MLK-14627 android: Fix cache unaligned warningYe Li2017-04-06-3/+36
| | | | | | | | The sparse image writing and boot image reading may have cache unaligned problem. The u-boot v2017 will print warning at runtime. This patch fixes the unaligned problem. Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-9263-3 [Android] Partition: enable GPT partition on imx devicesSanshan Zhang2017-04-05-12/+71
| | | | | | | | | | | | | 1. pass androidboot.storage_type to android, 'init' use it to parse different init.freescale.storage.rc. 2. store new ptable with gpt partition. 3. we use the last LBA as backup gpt table, there is many warning log when boot, change print to debug Change-Id: I84070735e9d4c2741b0e240bc1c61b357dabc5b8 Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit da0ce2787256a323371641b0764266d386d767a5) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-2 android: Add FSL android fastboot supportYe Li2017-04-05-0/+1766
| | | | | | | | | | | | | | | | | | | | | | Integrate the FSL android fastboot features into community's fastboot. 1. Use USB gadget g_dnl driver 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Add a new boot command "boota" for android image boot. The boota implements to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 5. Support the authentication of boot.img at the "load_addr" for both SD and NAND. 6. We use new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 7. Overwrite the cmdline in boot.img by using bootargs saved in local environment. 8. Add recovery and reboot-bootloader support. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 23d63ff185929fff5e392efc853d69b606ba081a)
* MLK-14445-5 ehci-mx6: Add OTG ID detecting by GPIOYe Li2017-04-05-0/+27
| | | | | | | | | The i.MX7ulp EVK board uses GPIO to detect ID for USB OTG0, but when using DM USB driver, it is hard coded to use OTG ID pin. Add a board override function that when extcon property is provided, the function can check the GPIO to get ID. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13450-15 ehci-mx6: Add powerup_fixup implementationYe Li2017-04-05-1/+27
| | | | | | | | | | | | | | | | | | | | | When doing port reset, the PR bit of PORTSC1 will be automatically cleared by our IP, but standard EHCI needs explicit clear by software. The EHCI-HCD driver follow the EHCI specification, so after 50ms wait, it clear the PR bit by writting to the PORTSC1 register with value loaded before setting PR. This sequence is ok for our IP when the delay time is exact. But when the timer is slower, some bits like PE, PSPD have been set by controller automatically after the PR is automatically cleared. So the writing to the PORTSC1 will overwrite these bits set by controller. And eventually the driver gets wrong status. We implement the powerup_fixup operation which delays 50ms and will check the PR until it is cleared by controller. And will update the reg value which is written to PORTSC register by EHCI-HCD driver. This is much safer than depending on the delay time to be accurate and aligining with controller's behaiver. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 8dfdf83abaff44efb487f801cd1757a729d427c5)
* MLK-13450-14 ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li2017-04-05-15/+42
| | | | | | | | | | | | The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1ac22cabb96a14ac4ca58df60ae2025fb5e94db6)
* MLK-12483-4 mx6: Modify drivers to disable fused modulesYe Li2017-04-05-0/+15
| | | | | | | | | | | Add the fuse checking in drivers, when the module is disabled in fuse, the driver will not work. Changed drivers: BEE, GPMI, APBH-DMA, ESDHC, FEC, QSPI, ECSPI, I2C, USB-EHCI, GIS, LCDIF. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1704e116f9b39aeb99201919a18bc2b1e19a980e)
* usb: gadget: f_dfu: set serial number if serial# is validFelipe Balbi2017-02-26-0/+5
| | | | | | | With this patch, USB Command Verifier is happy with our DFU implementation on Chapter 9 tests. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: g_dnl: fix g_dnl_set_serialnumber()Felipe Balbi2017-02-26-2/+1
| | | | | | | | | | | | | instead of only copying if strlen(s) is less than 32 characters, let's just copy at most 31 characters regardless of the size of serial#. This will guarantee that we always have a serial number if serial# environment variable is set to anything. Note that without a proper serial number, USB Command Verifier fails our test of Device Descriptor since we will claim to have a serial number without really providing one when requested. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: f_dfu: write req->actual bytesFelipe Balbi2017-02-26-1/+1
| | | | | | | | | If last packet is short, we shouldn't write req->length bytes to non-volatile media, we should write only what's available to us, which is held in req->actual. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* usb: gadget: dfu: add result for handle_getstatus()Patrick Delaunay2017-02-26-22/+13
| | | | | | | | harmonize result with other handle_XXX() functions: return int for size remove the define RET_STAT_LEN : no more necessary Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* usb: gadget: dfu: correct size for USB_REQ_DFU_GETSTATE resultPatrick Delaunay2017-02-26-11/+11
| | | | | | | | | | | | | | | return the correct size for DFU_GETSTATE result (1 byte in DFU 1.1 spec) to avoid issue in USB protocol and the variable "value" is propagated to req->lenght as all the in the other request with answer - DFU_GETSTATUS - DFU_DNLOAD - DFU_UPLOAD Then the buffer is correctly treated in USB driver NB: it was the only request witch directly change "req->actual" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* usb: gadget: dfu: add functional descriptor in descriptor setPatrick Delaunay2017-02-26-1/+9
| | | | | | | | | | | The "DFU descriptor set" must contain the "DFU functional descriptor" but it is missing today in U-Boot code (cf: DFU spec 1.1, chapter 4.2 DFU Mode Descriptor Set) This patch only allocate buffer and copy DFU functional descriptor after interfaces. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* usb: dwc3: gadget: Remove unused header inclusionVincent Tinelli2017-02-26-1/+0
| | | | | | | Remove sys_proto.h inclusion which is not used by the driver. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* dm: core: Replace of_offset with accessorSimon Glass2017-02-08-23/+25
| | | | | | | | | At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
* drivers: usb: gadget: ether: Fix compiler warningLokesh Vutla2017-01-17-0/+2
| | | | | | | | | | | Latest gcc 6.2 compiler is throwing the below warning for am335x_baltos_defconfig drivers/usb/gadget/ether.c:501:17: warning: 'mdlm_detail_desc' defined but not used [-Wunused-const-variable=] static const u8 mdlm_detail_desc[] = { Guard mdlm_detail_desc with CONFIG_USB_ETH_SUBSET to avoid the warning Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* usb: ehci-mx6: handle vbus-supplyPeng Fan2017-01-17-3/+27
| | | | | | | | | | Drop board_ehci_power when dm usb used and switch to use regulator api to handle vbus. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
* usb: ehci-mx6: implement ofdata_to_platdataPeng Fan2017-01-17-0/+75
| | | | | | | | | | | | Implement ofdata_to_platdata to set the type to host or device. - Check "dr-mode" property. - If there is no "dr-mode", check phy_ctrl for i.MX6 and phy_status for i.MX7 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
* drivers: usb: Add USB_XHCI_ZYNQMP to KconfigMichal Simek2017-01-17-0/+6
| | | | | | Move symbol to Kconfig to cleanup configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* usb: dwc2-otg: remove unused variableMasahiro Yamada2017-01-17-2/+0
| | | | | | | | | | | GCC 6.1 complains about this. drivers/usb/gadget/dwc2_udc_otg.c:72:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] static const char driver_desc[] = DRIVER_DESC; ^~~~~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* drivers: usb: gadget: ether/rndis: convert driver to adopt device driver modelMugunthan V N2017-01-09-15/+174
| | | | | | Adopt usb ether gadget and rndis driver to adopt driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* Update Maintainer and Author's email addressAjay Bhargav2016-12-27-2/+2
| | | | | | | | I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by: Ajay Bhargav <contact@8051projects.net>
* net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffersStefan Roese2016-12-08-6/+16
| | | | | | | | | | | | | | | | Testing on theadorable (Armada XP) has shown, that using this driver results in many cache misaligned warning, such as: CACHE: Misaligned operation at range [7fabd8fc, 7fabd900] This patch now uses the ALLOC_CACHE_ALIGN_BUFFER() macro to allocate the buffers on a cache aligned boundary. This fixes all warnings seen on the Armada XP platform. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ted Chen <tedchen@realtek.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: xhci-pci: Add DM supportStefan Roese2016-12-06-0/+81
| | | | | | | | | | | | | | | | | | This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms. Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: George McCollister <george.mccollister@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* fsl/usb: enable the errata-a005697 for ls1012ajerry.huang@nxp.com2016-12-05-0/+4
| | | | | | | Enable the errata-a005697 for ls1012a Signed-off-by: Changming Huang <jerry.huang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* usb: gadget: remove unused shortname variableAndre Przywara2016-12-04-1/+0
| | | | | | | | | | | The shortname variable isn't referenced anywhere in the code, so just remove it. Pointed out by a GCC 6.2 default warning option. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: eth: r8152_fw: fix indentationAndre Przywara2016-12-04-4/+4
| | | | | | | | | | | Apparently the indentation is wrong here, fix this to avoid compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-dmTom Rini2016-12-03-64/+391
|\
| * drivers: usb: musb: add ti musb host driver with driver model supportMugunthan V N2016-12-02-0/+191
| | | | | | | | | | | | | | | | | | Add a TI MUSB host driver with driver model support and the driver will be bound by the MUSB wrapper driver based on the dr_mode device tree entry. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * drivers: usb: musb: adopt musb backend driver to driver modelMugunthan V N2016-12-02-11/+11
| | | | | | | | | | | | | | | | | | | | Currently all backend driver ops uses hard coded physical address, so to adopt the driver to DM, add device pointer to ops call backs so that drivers can get physical addresses from the usb driver priv/plat data. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * drivers: usb: musb: add ti musb misc driver for wrapperMugunthan V N2016-12-02-0/+74
| | | | | | | | | | | | | | | | Add a misc driver for MUSB wrapper, so that based on dr_mode the USB devices can bind to USB host or USB device drivers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * drivers: usb: gadget: ether: prepare driver for driver model migrationMugunthan V N2016-12-02-21/+52
| | | | | | | | | | | | | | prepare driver for driver model migration Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * drivers: usb: gadget: ether: use net device priv to pass usb ether privMugunthan V N2016-12-02-25/+21
| | | | | | | | | | | | | | | | | | Use net device priv to pass usb ether priv and use it in net device ops callback. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * drivers: usb: gadget: ether: consolidate global devices to single structMugunthan V N2016-12-02-27/+26
| | | | | | | | | | | | | | | | | | | | Consolidate the net device, usb eth device and gadget device struct to single struct and a single global variable so that the same can be passed as priv of ethernet driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * drivers: usb: gadget: ether: adopt to usb driver modelMugunthan V N2016-12-02-0/+36
| | | | | | | | | | | | | | | | Convert usb ether gadget to adopt usb driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * drivers: usb: gadget: ether: access network_started using local variableMugunthan V N2016-12-02-5/+5
| | | | | | | | | | | | | | | | | | network_started of struct eth_dev can be accessed using local variable dev and no reason to access it with the global struct. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XXNishanth Menon2016-12-03-2/+2
|/ | | | | | | | | | | CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: add USB Gadget config optionStefan Agner2016-11-28-1/+2
| | | | | | | | | Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
* spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner2016-11-28-2/+6
| | | | | | | | | | | | | | | | The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* Fix spelling of "resetting".Vagrant Cascadian2016-10-31-2/+2
| | | | | | | | Cover-Letter: Fixes several spelling errors for the words "resetting", "extended", "occur", and "multiple". Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-10-30-3/+5
|\
| * sunxi: A64: enable USB supportAmit Singh Tomar2016-10-30-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly by adding MACH_SUN50I to some existing #ifdefs enable support for the the HCI0 USB host controller on the A64. Fix up some minor 64-bit hiccups on the way. Add the bare minimum DT bits to the A64 .dtsi and enable the controllers and the PHY on the Pine64. This is limited to the first USB controller at the moment, which is connected to the lower USB socket on the Pine64 board. [Andre: remove unneeded defines, enable OHCI, add commit message] Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-10-29-33/+21
|\ \ | |/ |/|
| * drivers: USB: OHCI: allow compilation for 64-bit targetsAndre Przywara2016-10-29-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | OHCI has a known limitation of allowing only 32-bit DMA buffer addresses, so we have a lot of u32 variables around, which are assigned to pointers and vice versa. This obviously creates issues with 64-bit systems, so the compiler complains here and there. To allow compilation for 64-bit boards which use only memory below 4GB anyway (and to avoid more invasive fixes), adjust some casts and types and assume that the EDs and TDs are all located in the lower 4GB. This fixes compilation of the OHCI driver for the Pine64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
| * usb: xhci-mvebu: use xhci_deregister() for .remove callbackMasahiro Yamada2016-10-27-6/+1
| | | | | | | | | | | | No need to use a wrapper that is equivalent to xhci_deregister(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * usb: ehci-vf: use ehci_deregister() for .remove callbackMasahiro Yamada2016-10-27-12/+1
| | | | | | | | | | | | | | | | This driver was recently converted to Driver Model, so missed the subsystem-wide cleanups by commit 405273427366 ("usb: replace ehci_*_remove() with usb_deregister()"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | usb: ehci-atmel: Remove unnecessary clock callingWenyou Yang2016-10-28-15/+0
|/ | | | | | | | Due to the peripheral clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* Remove some merge markersSimon Glass2016-10-23-3/+3
| | | | | | | | | | These two files have patch merge markers in them, within comments or strings. Remove then, so that a search for merge markers does not show up matches in these files. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: smsc95xx: fix DM MAC address readingStephen Warren2016-10-13-0/+16
| | | | | | | | | | | | | | | | | | | eth-uclass.c expects DM-capable Ethernet adapters to implement ops-> read_rom_hwaddr(), or for some other mechanism to set pdata->enetaddr, or for the user to set environment variable $usbethaddr. Without any of these, it will refuse to initialize the device since no valid MAC address is known. Implement this function for the smsc95xx driver. With this feature implemented, there is no point smsc95xx_init_common() re-reading the MAC address from ROM, so ifdef out this code when DM_ETH is enabled. This allows (at least) the built-in Ethernet on the NVIDIA Harmony board to operate again. Fixes: 0990fcb77219 ("net: smsc95xx: Add driver-model support") Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: pci: Fix cast for 64-bit compilationSimon Glass2016-10-11-2/+2
| | | | | | | Fix a cast that causes warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-11-06 03:21:00 +0000