summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
* IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic2011-04-27-1/+1
| | | | | | | | | | As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-04-05-0/+1
|\ | | | | | | | | | | | | Conflicts: drivers/usb/host/ehci-pci.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * echi: add ULI1575 PCI IDZhao Chenhui2011-04-04-0/+1
| | | | | | | | | | | | | | | | Add ULI1575 EHCI controller to the list of the supported devices. Signed-off-by: Zhao Chenhui <b35336@freescale.com> Acked-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | ehci-pci: Add PCI EHCI controllerTrübenbach, Ralf2011-04-02-1/+2
| | | | | | | | | | | | | | | | | | | | This patch adds support for the PI7C9X442SL PCIe EHCI host controller from Pericom. Tested at P4080DS eval board from Freescale. Signed-off-by: Ralf Trübenbach <ralf.truebenbach@men.de> Cc: Remy Bohmer <linux@bohmer.net>
* | usb: musb: blackfin: check anomaly workarounds at runtime tooMike Frysinger2011-04-02-3/+26
| | | | | | | | | | | | | | | | The anomaly workarounds we need for older silicon might break things if used on newer versions where the anomalies don't exist. So check the silicon rev at runtime too. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | usb: musb: blackfin: make clkin configurableMike Frysinger2011-04-02-1/+6
|/ | | | | | Not everyone has a 24MHz clkin to the USB, so let board porters override. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2011-03-27-2/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* USB-RNDIS: Send RNDIS state on disconnectingVitaly Kuzmichev2011-02-19-0/+36
| | | | | | | Add waiting for receiving Ethernet gadget state on the Windows host side before dropping pullup, but keep it for debug. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB: Add USB RNDIS gadget protocolVitaly Kuzmichev2011-02-19-60/+2362
| | | | | | | Port USB gadget RNDIS protocol support from linux-2.6.26 (.27 gadget stack actually has composite drivers). Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Move struct declaration before its useVitaly Kuzmichev2011-02-19-34/+36
| | | | Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Port struct net_device_statsVitaly Kuzmichev2011-02-19-0/+39
| | | | | | | Port struct net_device_stats and statistics collecting needed for RNDIS protocol. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: handle interrupt after dropped pullupVitaly Kuzmichev2011-02-19-0/+7
| | | | | | | | | | | | Disconnecting USB gadget with pending interrupt may cause its wrong handling in the next time when interface will be started again (especially actual for RNDIS). This interrupt may force the gadget to queue unexpected response before setup stage. Despite the fact that such interrupt handled after dropped pullup also may add pending response, this will not bring to any issues due to usb_ep_disable (which clears the queue) called on gadget unregistering. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* Add support for ASIX AX88772 USB 2.0 10/100Mbit Ethernet AdaptorSimon Glass2011-02-19-0/+645
| | | | | | | Driver originally written by NVIDIA Corporation, modified to handle odd-length packets. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add USB host ethernet adapter supportSimon Glass2011-02-19-0/+188
| | | | | | | | | | | | This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: Simon Glass <sjg@chromium.org>
* Fix EHCI usb submit timeout and unify with OHCISimon Glass2011-02-19-7/+10
| | | | | | | | | | | | Changed both to use a common timeout for URB submission, since they were using different values and EHCI's was too short. Also fixed EHCI to actually check if urb submission succeeded, rather than silently continuing into the weeds. Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82 Signed-off-by: Simon Glass <sjg@chromium.org>
* USB-CDC: Move MAC addresses setting into usb_eth_initVitaly Kuzmichev2011-01-19-36/+26
| | | | | | | This allows to change device and host MAC addresses without performing reset. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Do not rename netdev after its registrationVitaly Kuzmichev2011-01-19-3/+2
| | | | | | | Calling eth_bind at usb_eth_init time causes renaming of the network device from 'usb_ether' to 'usb0'. Fixing this to keep the first name. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* usb_ether: register usb ethernet gadget at each eth initLei Wen2011-01-19-4/+8
| | | | | | | | | | | | Since the ether may not be the only one usb gadget would be used in the uboot, it is neccessary to do the register each time the eth begin to work to make usb gadget driver less confussed when we want to use two different usb gadget at the same time. Usb gadget driver could simple ignore the register operation, if it find the driver has been registered already. Signed-off-by: Lei Wen <leiwen@marvell.com>
* usb: Remove usb_dev_init() from ehci-ppc4xx.cStefan Roese2010-11-26-1/+0
| | | | | | | | | Calling usb_dev_init() from within the EHCI host driver is wrong. The EHCI host driver should have no dependency/interconnection to the USB device driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
* usb: Clear CMD_RUN while issuing CMD_RESET in ehci_reset()Stefan Roese2010-11-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem noticed on lwmon5 (PPC440EPx) using the common EHCI driver, when "usb reset" is issued multiple times. Upon the 2nd (and further) "usb reset" command, the command fails with the following messages: => usb reset (Re)start USB... USB: Register 1111 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 5 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found => usb reset (Re)start USB... USB: EHCI fail to reset Error, couldn't init Lowlevel part This patch fixes this problem. Now "usb reset" can be called multiple times. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
* usb: Add WATCHDOG_RESET call to polling loopStefan Roese2010-11-26-0/+2
| | | | | | | | This watchdog reset call is needed here, otherwise the lwmon5 board (PPC440EPx based) will reset upon the "usb reset" command. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
* usb: fix for USB_ST_STALLED status reporting in ehci_submit_async()Anatolij Gustschin2010-11-26-0/+2
| | | | | | | | | | | Checking the status field of the qTD token in the current code do not take into acount cases where endpoint stall (halted) bit is set together with XactErr status bit. As a result clearing stall on an endpoint won't be done if this status bit was also set. Check for halted bit and report USB_ST_STALLED status if the host controller also indicates endpoit stall condition. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* Coding Style cleanupWolfgang Denk2010-10-27-4/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ehci-hcd.c: fix hanging under higher loadWolfgang Denk2010-10-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | This patch solves a problem with USB hanging under higher load on a i.MX31 board. It falls into class of typical USB problems and fixes: if you don't understand the real cause, add a delay somewhere. The problem appeared after introduction of ELF relocation, which results in smaller code, which appears to run faster (probably because it fits better in the cache); turning off the instruction cache, adding debug printf()s and increasing the delay have all been found to make the problem go away. Moving the original "udelay(1)" up in the code to it's new place made the problem appear much less frequently. Increasing the delay to 2 microseconds then made the code run reliably in all (hour-long) tests. To be on the safe side, we set it to 5 microseconds here. Signed-off-by: Heiko schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Stefano Babic <sbabic@denx.de>
* usb: musb: constify a bitMike Frysinger2010-10-22-19/+21
| | | | | | These ep and root hub structures need not be writable. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* USB: fix Queue Element Transfer Descriptor changesWolfgang Denk2010-10-22-1/+1
| | | | | | | | | | | | | | | | Commit 3ed1607 "USB: sync Queue Element Transfer Descriptor against EHCI spec" added an "__attribute__ ((aligned (32)))" to the declaration of struct qTD, as used for example in the Linux kernel as well. However, it turns out that this attribute causes errors in "usb start" (like "ERROR: NOT USB_CONFIG_DESC 7b" and similar). Drop the attribute again. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Dan Lykowski <lykowdk@gmail.com> Cc: Remy Bohmer <linux@bohmer.net> Cc: Stefano Babic <sbabic@denx.de>
* ehci-pci: print hccr, hcor and hc_lenghtFlorian Fainelli2010-10-22-0/+4
| | | | | | | It is useful to know the EHCI-PCI hccr, hcor and hc_lenght to make sure it was successfully registered, and at the correct location. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* USB: sync Queue Element Transfer Descriptor against EHCI specWolfgang Denk2010-10-20-5/+10
| | | | | | | | | | | | | | | | | | | Appendix B "EHCI 64-Bit Data Structures" of the "Enhanced Host Controller Interface Specification for Universal Serial Bus" (Rev. 1.0, March 12, 2002) defines additional fields which were missing in U-Boot's struct qTD; as these are also present in recent versions of struct ehci_qtd in the Linux kernel, we add them here, too. This fixes some nasty memory corruption problems. Reported-by: Dan Lykowski <lykowdk@gmail.com> See http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/76942 Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Dan Lykowski <lykowdk@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-19-0/+2
|\ | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| * MX31: add delay between USB port setup and resetStefano Babic2010-10-18-0/+2
| | | | | | | | | | | | | | | | Sometimes a usb tree is not popolated after a system reset. It seems a delay is required after setting the USB ports for the MX.31 before resetting the ehci controller. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | MPC5121: Add USB EHCI supportDamien Dusha2010-10-18-1/+169
|/ | | | | | | | | | Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com> Signed-off-by: Damien Dusha <d.dusha@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Coding style cleanup; slight file restructuring. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Remy Bohmer <linux@bohmer.net>
* Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-17-0/+131
|\
| * MX31: Add support for MXC EHCI controllerStefano Babic2010-10-13-0/+131
| | | | | | | | | | | | The patch adds the EHCI controller for the i.MX31 Soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | usb: musb: only write CLRDATATOG when appropriateBryan Wu2010-10-13-7/+16
| | | | | | | | | | | | | | | | | | | | This is a change similar to what is already in the Linux driver. We should only program the CLRDATATOG bit when the current mode indicates that it is needed. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | USB-CDC: Prevent rx_req being enqueued twiceVitaly Kuzmichev2010-10-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After gadget reinitializaton (after tftp has been done once) packet_received may become equal to 1 due to nuking OUT_EP while disabling it in eth_reset_config. rx_submit called from usb_eth_init queues rx_req first time. But the first call of usb_eth_recv from NetLoop queues rx_req again due to packet_received = 1. The following flow shows the path of functions calls when this happens: net/net.c:NetLoop | +-net/eth.c:eth_init | ether.c:usb_eth_init | | | +-udc_driver:usb_gadget_handle_interrupts | | udc_driver:... | | ether.c:eth_setup | | ether.c:eth_set_config | | ether.c:eth_reset_config | | udc_driver:usb_ep_disable | | udc_driver:nuke | | ether.c:rx_complete | | ether.c: packet_received = 1; | | | +-ether.c:rx_submit | udc_driver:usb_ep_queue --- The first time when rx_req is queued | +-net/eth.c:eth_rx ether.c:usb_eth_recv | +-udc_driver:usb_gadget_handle_interrupts | udc_driver:... --- no interrupts, returning +-ether.c: if (packet_received) { ... ether.c:rx_submit udc_driver:usb_ep_queue --- The second time! Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* | USB-CDC: Fix tx/rx_req memory leaksVitaly Kuzmichev2010-10-13-13/+7
| | | | | | | | | | | | | | | | | | | | | | | | Remove and fix needless and destructive operations with tx/rx_req. 1) 'req' in rx_complete is always not NULL and always equals to rx_req 2) Free allocated tx_req if rx_req allocation has failed 3) Do not zero out tx/rx_req in usb_eth_init, leave this for eth_reset_config which will be called at the next use of usb0 4) Additional check in usb_eth_recv is not required Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* | USB: Make non-bulk delay longer in OHCIMarek Vasut2010-10-13-1/+1
|/ | | | | | | This fixes TIMEOUT with my Kingston 32GB USB3.0 flashdrive, which I experienced on my PXA270 (USB 1.1) Vpac270 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* USB-CDC: Fix coding style issuesVitaly Kuzmichev2010-09-20-330/+357
| | | | | | | | | | | | | | | | | Fixes most of checkpatch warnings and errors in USB gadget stack. The most frequently encountered problems are: 1) "(foo*)", "foo * bar", "foo* bar" 2) C99 // comments 3) No spaces before/after/around '?', ':', '=', '==', ',', '&', '(' 4) Spaces before '[' 5) Spaces between function names and '(' 6) Block braces in wrong places 7) Spaces before tabs 8) Macros with complex values not enclosed in parenthesis 9) Multiline comments start just after /* Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: called handle_interrupts inside usb_eth_sendStefano Babic2010-09-20-1/+9
| | | | | | | | | The patch removes an endless loop in the usb_eth_send if the tx_complete is not called before going in the loop. The driver interrupt routine is called allowing the driver to check if the TX is completed. Signed-off-by: Stefano Babic <sbabic@denx.de>
* USB-CDC: correct wrong alignment in ether.cStefano Babic2010-09-20-1/+1
| | | | | | | | The buffer for the status request must be word aligned because it is accessed with 32 bit pointer in the eth_status_complete function. Signed-off-by: Stefano Babic <sbabic@denx.de>
* USB-CDC: change simple_strtol to simple_strtoulVitaly Kuzmichev2010-09-20-1/+1
| | | | | | | | | | The patch is based on commit bb9496c6f7e853e5d4edd5397c9d45f1968d623c (done by Julia Lawall <julia@diku.dk>) from linux-2.6.git. Since num is unsigned, it would seem better to use simple_strtoul that simple_strtol. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: ethernet error path potential oops fixVitaly Kuzmichev2010-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix potential oops on rare error path. The patch is based on commit e7b13ec9235b9fded90f826ceeb8c34548631351 (done by David Brownell <david-b@pacbell.net>) from linux-2.6.git. Description of the issue taken from linux kernel bugzilla: (https://bugzilla.kernel.org/show_bug.cgi?id=9594) The potential error can be tracked down as follows: (1) line 807: let the second conjunct on the "if" statment be false meaning "dev->status_ep" is null. This means the "if" evaluates to false. follow thru the code until... (2) line 808: usb_ep_disable(dev->status_ep) passes in a null argument, however "usb_ep_disable" cannot handle that: (from include/linux/usb/gadget.h) 191 static inline int 192 usb_ep_disable (struct usb_ep *ep) 193 { 194 return ep->ops->disable (ep); 195 } -- Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Correct stat_req initializationVitaly Kuzmichev2010-09-20-4/+3
| | | | | | | | Fix possible oops on stat_req->buf initialization and fix ep0 and status_ep confusion (last one is just intended for stat_req keeping). Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
* USB-CDC: Replace 'strcpy' by 'strlcpy'Vitaly Kuzmichev2010-09-20-3/+3
| | | | | | Replace 'strcpy' by more safe 'strlcpy' that is implemented in ether.c Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Correct freeing usb requestsVitaly Kuzmichev2010-09-20-2/+7
| | | | | | | Fix in_ep and out_ep confusion (rx_req was allocated from out_ep, not from in_ep) and add lost dev->req freeing. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Use native debug printout macrosVitaly Kuzmichev2010-09-20-53/+43
| | | | | | | | Replace Linux-like debug printout macros by native ones. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Applied after removing dead code like '#define DEBUG/#undef DEBUG'
* USB-CDC: Add lost 'qmult' definitionVitaly Kuzmichev2010-09-20-0/+6
| | | | | | | Add lost 'qmult' definition for High Speed devices and make it configurable through CONFIG_USB_ETH_QMULT. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Restuct USB gadget MakefileVitaly Kuzmichev2010-09-20-2/+5
| | | | | | | Prohibit simultaneous usage of both old and new gadget stacks and allow UDC drivers to be dependent on CONFIG_USB_ETHER. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* Integrate USB gadget layer and USB CDC driver layerRemy Bohmer2010-09-20-0/+2728
| | | | | | | Derived from Linux kernel 2.6.27 Signed-off-by: Thomas Smits <ts.smits@gmail.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
generated by cgit v1.1 at 2024-12-24 02:38:55 +0000