summaryrefslogtreecommitdiff
path: root/drivers/usb
Commit message (Collapse)AuthorAgeLines
* mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.hOtavio Salvador2012-09-01-1/+1
| | | | | | | The CLKCTRL registers are SoC specific so we ought to have it clear on filename. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-01-103/+51
| | | | | | | | | | Also enable the ohci port on hawkboard. These additions result in an increased u-boot size -- adjust the same accordingly in the board's config. Move the usb header for da8xx platforms under arch-davinci. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* mxs: prefix register structs with 'mxs' prefixOtavio Salvador2012-09-01-8/+8
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: prefix register acessor macros with 'mxs' prefixOtavio Salvador2012-09-01-4/+4
| | | | | | | As the register accessing mode is the same for all i.MXS SoCs we ought to use 'mxs' prefix intead of 'mx28'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-1/+1
| | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* Merge branch 'next' of git://git.denx.de/u-bootWolfgang Denk2012-07-30-13/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of git://git.denx.de/u-boot: MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c doc: cleanup - move board READMEs into respective board directories net: sh_eth: add support for SH7757's GETHER net: sh_eth: modify the definitions of regsiter net: sh_eth: add SH_ETH_TYPE_ condition net: sh_eth: clean up for the SH7757's code net: fec_mxc: Fix MDC for xMII net: fec_mxc: Fix setting of RCR for xMII net: nfs: make NFS_TIMEOUT configurable net: Inline the new eth_setenv_enetaddr_by_index function net: allow setting env enetaddr from net device setting net/designware: Consecutive writes to the same register to be avoided CACHE: net: asix: Fix asix driver to work with data cache on net: phy: micrel: make ksz9021 phy accessible net: abort network initialization if the PHY driver fails phylib: phy_startup() should return an error code on failure net: tftp: fix type of block arg to store_block Signed-off-by: Wolfgang Denk <wd@denx.de>
| * CACHE: net: asix: Fix asix driver to work with data cache onMarek Vasut2012-07-11-13/+17
| | | | | | | | | | | | | | | | | | The asix driver did not align buffers, therefore it didn't work with data cache enabled. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
* | smsc95xx: align buffers to cache line sizeIlya Yanok2012-07-18-4/+9
| | | | | | | | | | | | | | Align buffers passed to the USB code to cache line size so they can be DMAed safely. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | ehci-hcd: change debug() to printf() in case of errorsIlya Yanok2012-07-18-3/+3
| | | | | | | | | | | | Printing message could be useful if something goes really wrong. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | ehci-hcd: fix external buffer cache handlingIlya Yanok2012-07-18-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffer coming from upper layers should be cacheline aligned/padded to perform safe cache operations. For now we don't do bounce buffering so getting unaligned buffer is an upper layer error. We can't check if the buffer is properly padded with current interface so just assume it is (consider changing with in the future). The following changes are done: 1. Remove useless length alignment check. We get actual transfer length not the size of the underlying buffer so it's perfectly valid for it to be unaligned. 2. Move flush_dcache_range() out of while loop or it will flush too much. 3. Don't try to fix buffer address before calling invalidate: if it's unaligned it's an error anyway so let cache subsystem cry about that. 4. Fix end buffer address to be cacheline aligned assuming upper layer reserved enough space. This is potentially dangerous operation so upper layers should be careful about that. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignmentTom Rini2012-07-18-30/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB spec says that 32 bytes is the minimum required alignment. However on some platforms we have a larger minimum requirement for cache coherency. In those cases, use that value rather than the USB spec minimum. We add a cpp check to <usb.h> to define USB_DMA_MINALIGN and make use of it in ehci-hcd.c and musb_core.h. We cannot use MAX() here as we are not allowed to have tests inside of align(...). Signed-off-by: Tom Rini <trini@ti.com> [marek.vasut]: introduce some crazy macro voodoo Signed-off-by: Marek Vasut <marex@denx.de> [ilya.yanok]: moved external buffer fixes to separate patch, we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN for qh_list, qh and qtd structures to make sure they are proper aligned for both controller and cache operations. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | ehci-hcd: program asynclistaddr before every transferIlya Yanok2012-07-18-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | Move or_asynclistaddr programming to ehci_submit_async() function to make sure queue head is properly programmed before every transfer. This solves the problem with changing qh address. Also remove unneeded qh_list->qh_link reprogramming at the end of transfer. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | ehci-omap: Do not call dcache_off from omap_ehci_hcd_initTom Rini2012-07-18-1/+0
|/ | | | | | | | | This has never been completely sufficient and now happens too late to paper over the cache coherency problems with the current USB stack. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2012-07-10-1/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: tegra: define fdt_load/fdt_high variables tegra: enable bootz command tegra: usb: Fix device enumeration problem of USB1 tegra: trimslice: set up serial flash pinmux tegra: add pin_mux_spi() board initialization function tegra: add GMC/GMD funcmux entry for SFLASH tegra: bootcmd: start USB only when needed tegra: bootcmd enhancements tegra: add enterrcm command tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG Add env vars describing U-Boot target board tegra: usb: fix wrong error check tegra: add ULPI on USB2 funcmux entry tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches tegra: Add Tamonten Evaluation Carrier support tegra: Use SD write-protect GPIO on Tamonten tegra: Implement gpio_early_init() on Tamonten tegra: Allow boards to perform early GPIO setup tegra: plutux: Add device tree support tegra: medcom: Add device tree support tegra: Rework Tamonten support beagle: add eeprom expansion board info for bct brettl4 Signed-off-by: Wolfgang Denk <wd@denx.de>
| * tegra: usb: Fix device enumeration problem of USB1Jim Lin2012-07-09-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A known hardware issue of USB1 port where bit 1 (connect status change) of PORTSC register will be set after issuing Port Reset (like "usb reset" in u-boot command line). This will be treated as an error and stops later device enumeration. Therefore we clear that bit after Port Reset in order to proceed later device enumeration. Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | EXYNOS: Add power Enable/Disable for USB-EHCIRajeshwari Shinde2012-07-09-0/+5
| | | | | | | | | | | | | | | | | | This patch adds functions to enable/disable the power of USB host controller for EXYNOS5. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
* | USB: EXYNOS: Set USB 2.0 HOST Link modeRajeshwari Shinde2012-07-09-0/+3
| | | | | | | | | | | | | | This patch adds a function to set usb host mode to USB 2.0 HOST Link for EXYNOS5 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
* | USB: EXYNOS: Incorporate EHCI review commentsRajeshwari Shinde2012-07-09-10/+10
|/ | | | | | | This patch incorates the review comments given by Minkyu Kang for EHCI support on EXYNOS Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
* ehci-atmel: fix compiler warningAndreas Bießmann2012-07-07-2/+2
| | | | | | | | | | | | | | | | Commit 7a101e946cba55e32d3d1265e30456c810046da3 introduced following warning: ---8<--- ehci-atmel.c: In function 'ehci_hcd_init': ehci-atmel.c:49:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ehci-atmel.c: In function 'ehci_hcd_stop': ehci-atmel.c:79:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] --->8--- This patch fixes it. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> cc: Bo Shen <voice.shen@atmel.com> cc: Marek Vasut <marex@denx.de>
* Atmel : usb : add EHCI driver for Atmel SoCBo Shen2012-07-07-0/+90
| | | | | | | | | | | | | | | Some Atmel SoC support USB EHCI, add the EHCI driver to support it. To enable the USB EHCI, add the following configuration options into board relative configuration file and remove USB OHCI options. #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* net: Fix remaining API interface breakageJoe Hershberger2012-05-23-4/+3
| | | | | | | | | | | These are all the files which use the API incorrectly but did not get built using MAKEALL -a powerpc|arm. I have no compiler for them, but the remaining issues should be far less than without this patch. Any outstanding issues are left to the maintainers of boards that use these drivers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/usb/eth/asix.c: Fix build warningAnatolij Gustschin2012-05-22-1/+1
| | | | | | | | Fix: asix.c: In function 'asix_eth_get_info': asix.c:629:12: warning: assignment from incompatible pointer type Signed-off-by: Anatolij Gustschin <agust@denx.de>
* drivers/usb/eth/smsc95xx.c: Fix GCC 4.6 warningAnatolij Gustschin2012-05-22-2/+1
| | | | | | | | | Fix: smsc95xx.c: In function 'smsc95xx_eth_get_info': smsc95xx.c:869:12: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2012-05-20-328/+1497
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-usb: USB: S5P: Add ehci support usb:udc:samsung Add functions for storing private gadget data in UDC driver usb:gadget:composite: Support for composite at gadget.h usb:gadget:composite USB composite gadget support usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file USB: Document the QH and qTD antics in EHCI-HCD USB: Drop cache flush bloat in EHCI-HCD USB: Drop ehci_alloc/ehci_free in ehci-hcd USB: Align buffers at cacheline usb: use noinline define
| * USB: S5P: Add ehci supportRajeshwari Shinde2012-05-20-0/+111
| | | | | | | | | | | | | | This patch adds ehci driver support for s5p. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
| * usb:udc:samsung Add functions for storing private gadget data in UDC driverLukasz Majewski2012-05-20-1/+14
| | | | | | | | | | | | | | | | | | This commit adds support for storing private data to Samsung's UDC driver. This data is afterward used by usb gadget. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb:gadget:composite USB composite gadget supportLukasz Majewski2012-05-20-0/+1082
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB Composite gadget implementation for u-boot. It builds on top of USB UDC drivers. This commit is based on following files from Linux Kernel v2.6.36: ./include/linux/usb/composite.h ./drivers/usb/gadget/composite.c SHA1: d187abb9a83e6c6b6e9f2ca17962bdeafb4bc903 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() callsLukasz Majewski2012-05-20-136/+188
| | | | | | | | | | | | | | | | | | This patch cleans up the Samsung's UDC driver. It replaces several DEBUG_* macros with debug_cond(). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h fileLukasz Majewski2012-05-20-0/+5
| | | | | | | | | | | | | | | | | | | | | | Remove the repeated USB descriptor code and use usbdescriptors.h file. ch9.h file has been copied from linux and is needed for USB gadget related work. Now usbdescriptors.h and ch9.h shall be used together. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * USB: Document the QH and qTD antics in EHCI-HCDMarek Vasut2012-05-20-0/+38
| | | | | | | | | | | | | | | | The construction of QH and qTD lists in ehci_submit_async() call is cryptic business, add at least a bit of comments so if someone is reading it, he can at least reference the intel ehci manual (ehci-r10.pdf). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * USB: Drop cache flush bloat in EHCI-HCDMarek Vasut2012-05-20-100/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discard the creepy cache flushing mechanisms in ehci-hcd.c and replace them with more straightforward flushing. In the new approach, the flushing takes place directly in ehci_submit_async() call instead of going through the QH list and flushing all members and buffers. This discards a lot of weird bit operations on the members of QH and qTD structures. NOTE: Certainly, this flushes even qTDs which are possibly unused in some transactions, though the overhead of the previous code was much higher than is the overhead of flushing two more cache lines (which most probably aren't even cached). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * USB: Drop ehci_alloc/ehci_free in ehci-hcdMarek Vasut2012-05-20-91/+32
| | | | | | | | | | | | | | | | These two functions were called only from ehci_submit_async(), therefore dissolve them as part of ehci_submit_async() to get rid of all those static variables. Signed-off-by: Marek Vasut <marex@denx.de>
* | imx: usb: There is no such registerTimo Ketola2012-05-15-2/+0
| | | | | | | | | | | | | | | | | | The reference manual of i.MX25 (nor i.MX31) does not define such register. This seems to access read only UH2_CAPLENGTH register (if CONFIG_MXC_USB_PORT is zero). Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* | i.MX25: usb: Set PORTSCx registerTimo Ketola2012-05-15-2/+0
| | | | | | | | | | | | | | | | | | The USB controller in i.MX25 has a PORTSCx registers which should be set. In this regard it is similar to the controller in i.MX31. As this file is compiled only with i.MX25 and -31, #ifdef check can be removed. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* | USB: ehci-mx6: Fix broken IO accessWolfgang Grandegger2012-05-15-2/+3
|/ | | | | | | | | | To get USB working again on the i.MX6, this patch fixes a bug introduced with commit 522b2a0 "Add proper IO accessors for mx6 usb registers.". At that occasion, I also added the missing __iomem directive. Cc: Marek Vasut <marex@denx.de> CC: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de>
* lin_gadget: use common linux/compat.hMike Frysinger2012-04-30-3/+4
| | | | | | | | | | | | | | | | Merge our duplicate definitions with the common header. Also fix drivers/usb/gadget/s3c_udc_otg_xfer_dma.c to use min() instead of min_t() since we remove the latter from compat.h. Additionally use memalign() directly as the lin_gadget specific kmalloc() macro is removed from lin_gadget_compat.h by this patch. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* ehci-omap: fix for enabling the correct usb portJeroen Hofstee2012-04-21-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor. "Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)" I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it. note: the twister boards still needs an additional `usb reset`, don't know why. U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38) AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Govindraj.R <govindraj.raja <at> ti.com> Acked-by: Tom Rini <trini@ti.com>
* Prepare v2012.04-rc2; minor Coding Style cleanupWolfgang Denk2012-04-16-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2012-03-30-5/+19
|\ | | | | | | | | * 'master' of git://git.denx.de/u-boot-usb: Enable high speed support for USB device framework and usbtty
| * Enable high speed support for USB device framework and usbttyVipin KUMAR2012-03-28-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the support for high speed in usb device framework and usbtty driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board configuration files have to define this macro to enable high speed support. Along with that specific peripheral drivers also need to define a function to let the framework know that the enumeration has happened at high speed. This function prototype is "int is_usbd_high_speed(void)" Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* | tegra: usb: Add support for Tegra USB peripheralSimon Glass2012-03-29-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds basic support for the Tegra2 USB controller. Board files should call board_usb_init() to set things up. Configuration is performed through the FDT, with aliases used to set the order of the ports, like this fragment: aliases { /* This defines the order of our USB ports */ usb0 = "/usb@0xc5008000"; usb1 = "/usb@0xc5000000"; }; drivers/usb/host files ONLY: Acked-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | usb: Add support for txfifo thresholdSimon Glass2012-03-29-1/+12
| | | | | | | | | | | | | | | | | | CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | USB: ehci-mx6: Add proper IO accessorsFabio Estevam2012-03-27-9/+4
| | | | | | | | | | | | | | | | | | Add proper IO accessors for mx6 usb registers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Jason Liu <r64343@freescale.com>
* | Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8Robert Delien2012-03-26-4/+4
| | | | | | | | | | | | | | | | | | This patch renames mx28_register to mx28_register_32 in order to prepare for the introduction of an 8-bit register, mx28_register_8. Signed-off-by: Robert Delien <robert@delien.nl> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
* | usb/ehci: Add USB support for the MX6QWolfgang Grandegger2012-03-26-0/+206
|/ | | | | | | Currently, only USB Host 1 is supported. Cc: Remy Bohmer <linux@bohmer.net> Signed-off-by: Wolfgang Grandegger <wg@denx.de>
* USB: Armada100: EHCI Driver for Armada100 SOCsAjay Bhargav2012-03-19-0/+65
| | | | | | This patch adds support for USB EHCI driver for Armada100 SOCs. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
* USB: Armada100: Add UTMI PHY interface driverAjay Bhargav2012-03-19-0/+96
| | | | | | | This patch adds USB host controller's UTMI PHY interface driver for Armada100 SOCs. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
* usb:udc:samsung:fix Remove the req_config flagŁukasz Majewski2012-03-19-13/+5
| | | | | | | | | | The dev->req_config flag was indicating that the forwarded request needs to perform the usb gadget delayed status. This is however not needed anymore, so it can be removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* USB:gadget:designware Fix memory nonalignment issueShiraz Hashim2012-03-19-1/+11
| | | | | | | | | While receiving packets from FIFO sometimes the buffer provided was nonaligned. Fix this by taking a temporary aligned buffer and then copying the content to nonaligned buffer. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* USB:gadget:designware Make locally used functions staticAmit Virdi2012-03-19-3/+3
| | | | Signed-off-by: Amit Virdi <amit.virdi@st.com>
generated by cgit v1.1 at 2024-12-24 02:38:48 +0000