summaryrefslogtreecommitdiff
path: root/drivers/usb/musb-new
Commit message (Collapse)AuthorAgeLines
* sunxi: musb: Fix some lo speed devices not working with musb hostHans de Goede2015-03-29-0/+14
| | | | | | | | | | | | | | | | The usb0 / otg phy on sunxi boards has a bug where it wrongly detects a high speed squelch on usb reset deassert when a lo speed device is plugged in. The android kernel has a work around for this in the form of temporary disabling the phy's squelch detection on reset deassert, this commit adds the same workaround to the u-boot sunxi musb code, thereby fixing various usb lo speed devices not working. Tested with a (before non working) usb keyboard and a usb 2.4 GHz wireless keyboard/mouse combo receiver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: musb: Return early on VBUS GPIO error instead of on a positive valuePaul Kocialkowski2015-03-21-1/+1
| | | | | | | | | This allows printing the error message when VBUS is detected, as it would with AXP VBUS detect. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: musb: Support checking VBUS using AXP221 PMICChen-Yu Tsai2015-03-10-14/+38
| | | | | | | | | | | | | | | | This enables the musb glue layer to use the AXP221's VBUS detection function to check for VBUS. This fixes otg support on the A23 q8h tablets. Note that u-boot never calls musb_shutdown(), so once VBUS is enabled, it is never disabled until the system is powered off, or the OS does so. This can be used to our advantage to keep VBUS powered into the OS, where support for AXP221 is not available yet. Fixes: 52defe8f6570 ("sunxi: musb: Check Vbus-det before enabling otg port power") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: musb-new: omap2430: Reset the MUSB controller earlyPaul Kocialkowski2015-02-24-0/+16
| | | | | | | | | | | | | | | When booting from USB peripheral boot, the bootrom will not properly deinit the MUSB controller, which doesn't clearly indicate an USB disconnection to the host and leaves U-Boot to deal with the state of the previous USB session. On some host controller drivers (e.g. xhci_hcd), this ends up in a failure during set address, caused by the lack of proper disconnection notification. Resetting the controller early in U-Boot notifies the host of the disconnection and doesn't hurt other use cases. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: musb: Check Vbus-det before enabling otg port powerHans de Goede2015-02-21-0/+29
| | | | | | | | | | | | Sending out 5V when there is a charger connected to the otg port is not a good idea, so check for this and error out. Note this commit currently breaks otg support on the q8h tablets, as we need to do some magic with the pmic there to get vbus info, this is deliberate (better safe then sorry), fixing this is on my TODO list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: otg: Fix peripheral modeHans de Goede2015-02-16-12/+1
| | | | | | | | Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* musb-new: Add interrupt queue supportHans de Goede2015-01-18-0/+65
| | | | | | | Add interrupt queue support, so that a usb keyboard can be used without causing huge latencies. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add urb and hep parameters to construct_urbHans de Goede2015-01-18-32/+31
| | | | | | | | Make construct_urb take an urb and hep parameter, rather then having it always operate on the file global urb and hep structs. This is a preperation patch for adding interrupt queue support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Properly remove a transfer from the schedule on timeoutHans de Goede2015-01-18-3/+14
| | | | | | | | | | | If a transfer / urb times-out, properly remove it from the schedule, rather then letting it sit on the ep head. This stops the musb code from getting confused and refusing to queue further transfers after a timeout. Tested by unplugging a usb-keyboard, replugging it and doing a usb-reset, before this commit the keyboard would not work after the usb-reset. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Fix reset sequence when in host modeHans de Goede2015-01-18-11/+20
| | | | | | | | | | | | | | | | | | | | | | This commit fixes a number of issues with the reset sequence of musb-new in host mode: 1) Our usb device probe relies on a second device reset being done after the first descriptors read. Factor the musb reset code into a usb_reset_root_port function (and add this as an empty define for other controllers), and call this when a device has no parent. 2) Just like with normal usb controllers there needs to be a delay after reset, for normal usb controllers, this is handled in hub_port_reset, add a delay to usb_reset_root_port. 3) Sync the musb reset sequence with the upstream kernel, clear all bits of power except bits 4-7, and increase the time reset is asserted to 50 ms. With these fixes an usb keyboard I have now always enumerates properly, where as earlier it would only enumerare properly once every 5 tries. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Fix interrupt transfers not workingHans de Goede2015-01-18-1/+1
| | | | | | | | | | | | | | For bulk and ctrl transfers common/usb.c sets udev->status = USB_ST_NOT_PROC, but it does not do so for interrupt transfers. musb_uboot.c: submit_urb() however was waiting for USB_ST_NOT_PROC to become 0, and thus without anyone setting USB_ST_NOT_PROC would exit immediately for interrupt urbs, returning the urb status of EINPROGRESS as error. This commit fixes this, thereby also making usb_kbd.c work together with musb_new and CONFIG_SYS_USB_EVENT_POLL. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Use time based timeouts rather then cpu-cycles based timeoutsHans de Goede2015-01-18-8/+8
| | | | | | | | | | | | CPU cycle based timeouts are no good, because how long they use depends on CPU speed. Instead use time based timeouts, and wait one second for a device connection to show up (per the USB spec), and wait USB_TIMEOUT_MS for various urbs to complete. This fixes "usb start" taking for ever when no device is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add sunxi musb controller supportHans de Goede2015-01-18-0/+280
| | | | | | | This is based on Jussi Kivilinna's work for the linux-sunxi-3.4 kernel to use the kernels musb driver instead of Allwinners own custom driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add register defines for different reg layout on sunxiHans de Goede2015-01-18-0/+92
| | | | | | | The sunxi SoCs also have a musb controller, but with a different register layout. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host modeDaniel Mack2014-10-06-2/+0
| | | | | | | | | | | | | This bit allows the MUSB controller to negotiate for high-speed mode when the device is reset by the hub. If unset, Babble errors occur with high-speed mass storage devices right after the first packet. This condition is not caught by the interrupt handles in U-Boot, so no recovery is done, and the USB communication is stuck. To fix this, set the bit unconditionally, not only for CONFIG_USB_GADGET_DUALSPEED but also for host-only modes. Signed-off-by: Daniel Mack <zonque@gmail.com>
* kbuild: force to define __UBOOT__ in all the C sourcesMasahiro Yamada2014-09-16-8/+0
| | | | | | | | | | | | | | | | | | | | | | | U-Boot has imported various source files from other projects, mostly Linux. Something like #ifdef __UBOOT__ [ modification for U-Boot ] #else [ original code ] #endif is an often used strategy for clarification of adjusted parts, that is, easier re-sync in future. Instead of defining __UBOOT__ in each source file, passing it from the top Makefile would be easier. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* lib, linux: move linux specific defines to linux/compat.hHeiko Schocher2014-08-25-58/+0
| | | | | | | | | | | | | | | | - move linux specific defines from usb and video code into linux/compat.h - move common linux specific defines from include/ubi_uboot.h to linux/compat.h - add for new mtd/ubi/ubifs sync new needed linux specific defines to linux/compat.h Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [trini: Add spin_lock_irqsave/spin_unlock_irqrestore dummies from usb/lin_gadet_compat.h] Signed-off-by: Tom Rini <trini@ti.com>
* musb-new, dfu: first send request answer then call completionsHeiko Schocher2014-05-08-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | comment in ep0_txstate() states: "report completions as soon as the fifo's loaded; there's no win in waiting till this last packet gets acked". This is wrong for using dfu. In the dfu usecase we must send a PollTimeout to the host, so the host can wait until the U-Boot Code is ready for answering new usb requests. So the answer which contains the PollTimeout must send *before* U-Boot calls req->complete. The req->complete is used in the dfu case for flushing the medium, when entering DFU_STATE_dfuMANIFEST_SYNC state. Change-Id: Ib2941119c72761e48e15fedbdad1ecce07ae0b3d Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: musb: fill in usb_gadget_unregister_driverRob Herring2014-04-30-1/+4
| | | | | | | | Add missing missing disconnect and unbind calls to the musb gadget driver's usb_gadget_unregister_driver function. Otherwise, any gadget drivers fail to uninitialize and run a 2nd time. Signed-off-by: Rob Herring <robh@kernel.org>
* kbuild: use Linux Kernel build scriptsMasahiro Yamada2014-02-19-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
* drivers: usb: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-29/+6
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* usb: add enum usb_init_type parameter to usb_lowlevel_initTroy Kisky2013-10-20-1/+1
| | | | | | This parameter will later be used to verify OTG ports. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2013-10-14-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.hWu, Josh2013-08-22-16/+0
| | | | | | | | | | | | Since kernel code current use many dev_xxx() instead of using printk. To compatible, move those dev_xxx from usb driver to linux/compat.h. Then all driver code can use dev_err, dev_info and dev_vdbg. This patch also removed duplicated macro definitions in usb driver. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* musb: Disable extra printsLokesh Vutla2013-08-15-12/+8
| | | | | | | | | | There are many musb prints in SPL and U-Boot log. These prints are required only during musb debug. So replacing printk with pr_debug in musb_core. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* usb, musb-new: add wdt triggerHeiko Schocher2013-06-30-0/+2
| | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-2/+0
|\ | | | | | | | | Conflicts: drivers/video/exynos_fb.c
| * Consolidate bool typeYork Sun2013-04-01-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* | musb: set MUSB speed based on CONFIGBin Liu2013-04-08-1/+3
| | | | | | | | | | | | | | | | Do not config MUSB to highspeed mode if CONFIG_USB_GADGET_DUALSPEED is not set, in which case Ether gadget only operates in fullspeed. Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com>
* | musb: am335x: disable bulk split-combine featureBin Liu2013-04-08-0/+5
|/ | | | | | | | | | | | | | | | | | | On TI AM335x devices, MUSB has bulk split/combine feature enabled in the ConfigData register, but the current MUSB driver does not support it yet. Therefore, disable the feature for now, until the driver adds the support. One usecase which is broken because of this feature is that Ether gadget stops working in Fullspeed mode (by un-defining CONFIG_USB_GADGET_DUALSPEED) After desabled this feature, MUSB driver send packets in proper size (no more than 64 bytes) in Fullspeed mode. This has been validated with Ether gadget in Fullspeed mode on AM335x EVM. Signed-off-by: Bin Liu <b-liu@ti.com>
* musb-new: omap2plus backend driverIlya Yanok2012-11-20-0/+692
| | | | | | | Backend driver for MUSB OTG controllers found on TI OMAP2/3/4 (tested only on OMAP3 Beagle). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* musb-new: am35x backend driverIlya Yanok2012-11-20-0/+711
| | | | | | | | | | | | | Backend driver for MUSB OTG controllers found on TI AM35x. It seems that on AM35X interrupt status registers can be updated _before_ core registers. As we don't use true interrupts in U-Boot and poll interrupt status registers instead this can result in interrupt handler being called with non-updated core registers. This confuses the code and result in hanged transfers. Add a small delay in am35x_interrupt as a workaround. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* musb-new: dsps backend driverIlya Yanok2012-11-20-0/+772
| | | | | | | Backend driver for MUSB OTG controllers found on TI AM33xx and TI81xx SoCs (tested with AM33xx only). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* musb-new: port of Linux musb driverIlya Yanok2012-11-20-0/+10688
Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
generated by cgit v1.1 at 2024-11-08 07:59:01 +0000