summaryrefslogtreecommitdiff
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeLines
* MLK-13450-14 ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li2017-04-05-15/+42
| | | | | | | | | | | | The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1ac22cabb96a14ac4ca58df60ae2025fb5e94db6)
* MLK-12483-4 mx6: Modify drivers to disable fused modulesYe Li2017-04-05-0/+15
| | | | | | | | | | | Add the fuse checking in drivers, when the module is disabled in fuse, the driver will not work. Changed drivers: BEE, GPMI, APBH-DMA, ESDHC, FEC, QSPI, ECSPI, I2C, USB-EHCI, GIS, LCDIF. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1704e116f9b39aeb99201919a18bc2b1e19a980e)
* dm: core: Replace of_offset with accessorSimon Glass2017-02-08-16/+17
| | | | | | | | | At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: ehci-mx6: handle vbus-supplyPeng Fan2017-01-17-3/+27
| | | | | | | | | | Drop board_ehci_power when dm usb used and switch to use regulator api to handle vbus. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
* usb: ehci-mx6: implement ofdata_to_platdataPeng Fan2017-01-17-0/+75
| | | | | | | | | | | | Implement ofdata_to_platdata to set the type to host or device. - Check "dr-mode" property. - If there is no "dr-mode", check phy_ctrl for i.MX6 and phy_status for i.MX7 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
* drivers: usb: Add USB_XHCI_ZYNQMP to KconfigMichal Simek2017-01-17-0/+6
| | | | | | Move symbol to Kconfig to cleanup configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Update Maintainer and Author's email addressAjay Bhargav2016-12-27-2/+2
| | | | | | | | I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by: Ajay Bhargav <contact@8051projects.net>
* usb: xhci-pci: Add DM supportStefan Roese2016-12-06-0/+81
| | | | | | | | | | | | | | | | | | This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms. Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: George McCollister <george.mccollister@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Fix spelling of "resetting".Vagrant Cascadian2016-10-31-2/+2
| | | | | | | | Cover-Letter: Fixes several spelling errors for the words "resetting", "extended", "occur", and "multiple". Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-10-30-3/+5
|\
| * sunxi: A64: enable USB supportAmit Singh Tomar2016-10-30-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly by adding MACH_SUN50I to some existing #ifdefs enable support for the the HCI0 USB host controller on the A64. Fix up some minor 64-bit hiccups on the way. Add the bare minimum DT bits to the A64 .dtsi and enable the controllers and the PHY on the Pine64. This is limited to the first USB controller at the moment, which is connected to the lower USB socket on the Pine64 board. [Andre: remove unneeded defines, enable OHCI, add commit message] Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-10-29-33/+21
|\ \ | |/ |/|
| * drivers: USB: OHCI: allow compilation for 64-bit targetsAndre Przywara2016-10-29-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | OHCI has a known limitation of allowing only 32-bit DMA buffer addresses, so we have a lot of u32 variables around, which are assigned to pointers and vice versa. This obviously creates issues with 64-bit systems, so the compiler complains here and there. To allow compilation for 64-bit boards which use only memory below 4GB anyway (and to avoid more invasive fixes), adjust some casts and types and assume that the EDs and TDs are all located in the lower 4GB. This fixes compilation of the OHCI driver for the Pine64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
| * usb: xhci-mvebu: use xhci_deregister() for .remove callbackMasahiro Yamada2016-10-27-6/+1
| | | | | | | | | | | | No need to use a wrapper that is equivalent to xhci_deregister(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * usb: ehci-vf: use ehci_deregister() for .remove callbackMasahiro Yamada2016-10-27-12/+1
| | | | | | | | | | | | | | | | This driver was recently converted to Driver Model, so missed the subsystem-wide cleanups by commit 405273427366 ("usb: replace ehci_*_remove() with usb_deregister()"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | usb: ehci-atmel: Remove unnecessary clock callingWenyou Yang2016-10-28-15/+0
|/ | | | | | | | Due to the peripheral clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* Remove some merge markersSimon Glass2016-10-23-3/+3
| | | | | | | | | | These two files have patch merge markers in them, within comments or strings. Remove then, so that a search for merge markers does not show up matches in these files. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* usb: pci: Fix cast for 64-bit compilationSimon Glass2016-10-11-2/+2
| | | | | | | Fix a cast that causes warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-09-30-7/+224
|\ | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/dra7xx_evm.h
| * drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controllerSriram Dash2016-09-27-0/+13
| | | | | | | | | | | | | | | | | | | | | | Currently the controller by default enables the Receive Detect feature in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive detection in P3 mode. Enabling the USB3 controller to configure USB in P2 mode whenever the Receive Detect feature is required. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
| * usb: host: ehci-vf: Migrate Vybrid USB to driver modelSanchayan Maity2016-09-27-7/+201
| | | | | | | | | | | | Add driver model support for Vybrid USB driver. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
| * drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined ↵Sriram Dash2016-09-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | transfers requests This is required for better performance, and performs below tuning: 1. Enable burst length set, and define it as 4/8/16. 2. Set burst request limit to 16 requests. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-09-27-2/+11
|\ \
| * | ARM: tegra: fix USB ULPI PHY reset signal inversion confusionStephen Warren2016-09-27-2/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB ULPI PHY reset signals are typically active low. Consequently, they should be marked as GPIO_ACTIVE_LOW in device tree, and indeed they are in the Linux kernel DTs, and in DT properties that U-Boot doesn't yet use. However, in DT properties that U-Boot does use, the value has been set to 0 (== GPIO_ACTIVE_HIGH) to work around a bug in U-Boot. This change fixes the DT to correctly represent the HW, and fixes the Tegra USB driver to cope with the fact that dm_gpio_set_value() internally handles any inversions implied by the DT value GPIO_ACTIVE_LOW. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | usb: xhci-mvebu: Add Armada 8K to compatiblity listStefan Roese2016-09-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To enable this driver on Armada 7K/8K this patch adds the compatibility property to the list. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8)Stefan Roese2016-09-27-7/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds DM based support for the Armada 3700 EHCI controller. The address windows don't need to get configured in this case. The difference here is detected via DT compatible property at runtime. With this support and the DM xHCI driver, both XHCI and eHCI can be used simultaniously on the MVEBU boards now. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
* | usb: xhci: Add Marvell MVEBU xHCI supportStefan Roese2016-09-27-0/+106
|/ | | | | | | | | | | | | | | | | This patch adds DM based support for the xHCI USB 3.0 controller integrated in the Armada 3700 SoC. It may be extended to be used by other MVEBU SoCs as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: ehci-generic: support reset control for generic EHCIMasahiro Yamada2016-09-23-0/+13
| | | | | | | This driver is designed in a generic manner, so resets should be handled generically as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-10/+10
| | | | | | | | | | | | | | Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-1/+1
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: squash lines for immediate returnMasahiro Yamada2016-09-23-6/+1
| | | | | | This makes functions much simpler. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* usb: replace ehci_*_remove() with usb_deregister()Masahiro Yamada2016-09-23-90/+8
| | | | | | | | The remove callbacks of EHCI drivers are often just a wrapper of ehci_deregister. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* usb: host: add Kconfig for USB_XHCI_ROCKCHIPKever Yang2016-09-22-0/+7
| | | | | | | Add a Kconfig for Rockchip xhci controller. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: xhci-rockchip: add rockchip dwc3 controller driverMengDongyang2016-09-22-0/+212
| | | | | | | | | | | | This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: uniphier: remove UniPhier xHCI driver and select DM_USBMasahiro Yamada2016-09-14-93/+0
| | | | | | | | | | | | | | This driver has not been converted to Driver Model, and it is an obstacle to migrate other block device drivers. Remove it for now. The UniPhier SoCs already use a DM-based EHCI driver, so now ARCH_UNIPHIER can select DM_USB. These two changes must be done atomically because removing the legacy driver causes a build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dm: atmel: Add driver model support for the ehci driverWenyou Yang2016-08-15-0/+123
| | | | | | | | | Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb: xhci: fsl: Add code to use CONFIG_DM_USBRajesh Bhagat2016-08-07-1/+82
| | | | | | Adds code to use driver model for USB XHCI FSL driver Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* usb: ehci: fsl: Add code to use CONFIG_DM_USBRajesh Bhagat2016-08-07-4/+127
| | | | | | Adds code to use driver model for USB EHCI FSL driver Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* drivers: usb: fsl: Make function for initialization to use in CONFIG_DM_USBRajesh Bhagat2016-08-07-27/+36
| | | | | | | Moves code from ehci_hcd_init to new function ehci_fsl_init which can be re-used in CONFIG_DM_USB. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* usb: add (move) CONFIG_USB_HOST to KconfigMasahiro Yamada2016-08-07-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* usb: add CONFIG_USB_UHCI_HCD in KconfigMasahiro Yamada2016-08-07-0/+17
| | | | | | | | | | There is no UHCI driver entry in Kconfig for now, but we have some UHCI drivers, for example, LEON. This is a placeholder in case we want to move them to Kconfig in the future. The help message was copied from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* usb: add CONFIG_USB_OHCI_HCD in KconfigMasahiro Yamada2016-08-07-10/+25
| | | | | | | | | | | Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* dm: ehci-mx6: support driver modelPeng Fan2016-08-07-14/+130
| | | | | | | | | | | | | | | | Support driver model for ehci mx6 driver. Consolidate code to be shared between DM and non-DM, such as introducing ehci_mx6_common_init. For simplicity, some old fasion code are keeped for DM usage, such as board_ehci_power and board_usb_phy_mode. And 'dr-mode', usbphy and vbus handling code for DM is not added now. These will be added in future patches. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-07-28-5/+25
|\
| * usb: ehci-mx6: introduce config for high active power pinStefan Agner2016-07-19-0/+13
| | | | | | | | | | | | | | | | | | Add a new config CONFIG_MXC_USB_OTG_HACTIVE which configures the OTG Power Pin to be high active. Low active is the reset value of the affected configuration register, hence the config option is named by the non-reset configuration. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * usb: ehci-mx6: configure power polarity in usb_power_configStefan Agner2016-07-19-5/+5
| | | | | | | | | | | | | | | | USBNC_n_CTRL1 bit 9 actually controls the power pin polarity. Rename UCTRL_PM to align reference manual and set the bit in the appropriate callback usb_power_config. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * usb: move CONFIG_USB_EHCI_MX7 to KconfigStefan Agner2016-07-19-0/+7
| | | | | | | | | | | | | | Create an entry for "config USB_EHCI_MX7" in Kconfig and switch over to it for all boards. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | dm: zynq: usb: Convert to CONFIG_DM_USBSimon Glass2016-07-27-52/+51
| | | | | | | | | | | | Convert zynq USB to driver model. Note this is tested on zynq-zybo only. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass2016-07-27-6/+1
| | | | | | | | | | | | | | Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass2016-07-27-3/+1
| | | | | | | | | | | | | | This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-12-19 23:24:07 +0000