summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeLines
* USB: gadget: atmel: disconnect before unbindBo Shen2013-09-24-1/+2
| | | | | | When unbind the gadget driver, need call disconnect first. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb:g_dnl:dfu: Download gadget and DFU function code clean upLukasz Majewski2013-09-24-4/+1
| | | | | | | | | | | | The download gadget code and DFU function lacks of proper declarations for the case when a target board wants to use only one of available usb functions. Moreover the relevant declarations have been moved to consistent localization (like <dfu.h>). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb:gadget:Remove redundant #includes for USB composite gadget and its functionsLukasz Majewski2013-09-24-1/+0
| | | | | | | | | | Only the <linux/usb/gadget.h> requires error.h include. Hence, several includes of error.h at USB gadget functions are not needed. Moreover unnecessary malloc.h includes were also removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb:g_dnl:ums: Conditional compilation for mass storage function ↵Lukasz Majewski2013-09-24-1/+2
| | | | | | | | | | | | | | | (f_mass_storage) The mass storage composite function is now compiled in only when CONFIG_USB_GADGET_MASS_STORAGE is defined. Such change provides binary size reduction for boards which use USB download gadget (like am335x_evm) with DFU, but don't use UMS. For example at am335x_evm board reduction is more than 2KiB for text and around 120B for data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* USB: gadget: add atmel usba udc driverBo Shen2013-09-24-0/+1632
| | | | | | | | | | | | | | | | | Add atmel usba udc driver support, porting from Linux kernel The original code in Linux Kernel information is as following commit e01ee9f509a927158f670408b41127d4166db1c7 Author: Jingoo Han <jg1.han@samsung.com> Date: Tue Jul 30 17:00:51 2013 +0900 usb: gadget: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb: gadget: config: fix unaligned access issuesTroy Kisky2013-09-24-2/+4
| | | | | | | | | | | As seen with codesourcery compiler 2010q1, the buf pointer in usb_request structure is not aligned on 4 bytes boundary causing data aborts in eth_setup -> conf_buf -> usb_gadget_config_buf. Make it as align access to fix this issue. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> [voice.shen@atmel.com: add commit message] Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb: gadget: Fix data aborts during USB ethernet bootJoel Fernandes2013-09-24-2/+3
| | | | | | | | | | | | | | As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned on 4 byte boundaray causing data aborts in eth_setup -> conf_buf during dhcp boot over usb_ether. Fix the issue my aligning control_req buffer using DEFINE_CACHE_ALIGN_BUFFER. Tested on am335x_evm platform (beaglebone). Applies on 2013.10-rc1 branch. Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Joel Fernandes <joelf@ti.com>
* usb:dfu:g_dnl: Refactoring the string definition code for g_dnl driverLukasz Majewski2013-08-26-4/+7
| | | | | | | | | | The manufacturer and product IDs are dynamically assigned when gadget is bind. Now the IDs aren't assigned at struct g_dnl_string_defs definition. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
* usb:dfu:g_dnl: Change number of exported configurations at composite gadgetLukasz Majewski2013-08-26-2/+4
| | | | | | | | | | | | | | | | | | | USB composite gadget (g_dnl) supports only one configuration. Due to that the corresponding field - bConfigurationValue has been changed. Moreover more descriptive names were chosen for relevant fields. Windows XP setup: - Thesyscon USB Descriptor Dumper - zadig_xp program for WinUSB installation (which is required by dfu-util) - dfu-util for windows (version 0.6) - TRATS target connected via USB hub to test Win XP machine. Tested at: Trats - Exynos4210 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
* SPDX-License-Identifier: convert BSD-3-Clause filesWolfgang Denk2013-08-19-29/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini Don't remove some copyrights by accident] Signed-off-by: Tom Rini <trini@ti.com>
* dfu: Implementation of target reset after communication with dfu-util's -R ↵Lukasz Majewski2013-07-29-0/+2
| | | | | | | | | | | | | | switch This patch extends dfu code to support transmission with -R switch specified at dfu-util. When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after successful data transmission. Then dfu resources are released and reset command is issued. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* usb: mv_udc: Add bounce bufferMarek Vasut2013-07-29-7/+77
| | | | | | | | | | | | The requests sent to the controller are not properly cache aligned most of the time, thus implement a simple bounce buffer to avoid problem with cache. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Add proper cache managementMarek Vasut2013-07-29-5/+77
| | | | | | | | | | | | | Implement functions to flush/invalidate dcache over QH and qTDs and make use of them where appropriate. Also use them to replace the old incorrect cache management attempt. This is the first step towards making this driver work with data cache enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Implement better qTD item accessorMarek Vasut2013-07-29-2/+15
| | | | | | | | | | | | The code for retrieving qTD item for particular endpoint is hard to understand, moreover it's duplicated all over the driver. Move the code into single nice and documented function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Improve allocation of qTD itemsMarek Vasut2013-07-29-2/+23
| | | | | | | | | | | | | Allocate the qTD items all at once instead of allocating them separately. Moreover, make sure each qTD is properly aligned to 32-bytes boundary and that cache can be safely flushed over each qTD touple. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Implement better QH accessorMarek Vasut2013-07-29-5/+18
| | | | | | | | | | | | The code for retrieving QH for particular endpoint is hard to understand, moreover it's duplicated all over the driver. Move the code into single nice and documented function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Add cacheline length checkMarek Vasut2013-07-29-0/+10
| | | | | | | | | | | Check the length of system cacheline at compile-time and fail if the system uses too long cachelines. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Properly align the endpoint QH and qTD listMarek Vasut2013-07-29-8/+18
| | | | | | | | | | | | | | | | The endpoint QH list has to be aligned to 10-bit boundary. We also have to make sure the list is aligned on a cacheline boundary. Make sure it is. Furthermore, check if the memory allocation for the QH list didn't fail. Moveover, improve the comment about the QH list structure. Finally, the qTD item list has to be aligned only to 5-bit boundary, not 10-bit as it is now, fix this as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Move QH and qTD into mv_drvMarek Vasut2013-07-29-13/+13
| | | | | | | | | | | Both the endpoint queue head and the endpoint item list is a controller specific thing. Move them both into controller private data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Init mv_drv.gadget.ops staticallyMarek Vasut2013-07-29-3/+3
| | | | | | | | | | There is no need to init this field at runtime, so init it statically. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Remove QH_MAXNUM macroMarek Vasut2013-07-29-3/+4
| | | | | | | | | | | | The QH_MAXNUM is used in absolutelly incorrect manner and is not even needed. Remove it and correctly replace it's occurance with 2 * NUM_ENDPOINTS . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Clean up the initial variable checkMarek Vasut2013-07-29-6/+5
| | | | | | | | | | | | | Clean up the code that checks the validity of a USB gadget driver in usb_gadget_register_driver(). Moreover, limit the speed of the driver to either FULL or HIGH, this is more precise and once we have xHCI support, also more correct. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Make use of struct ehci_ctrlMarek Vasut2013-07-29-18/+23
| | | | | | | | | | | | | | | | | | | | The usb_lowlevel_init() call already fills and passes back struct ehci_ctrl , which readily contains correctly determined address of the port register block address computed from values from controller configuration registers. Leverage this and make use of this value as this makes the code mode universal, but also gets us rid of the CONFIG_USB_REG_BASE configuration option. Moreover, this patch cleans up the usb_gadget_register_driver() call a little by correcting the error handling. Note the usb_lowlevel_init() and mvudc_probe() are now called in reversed order, but this has no impact on the code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Clean up the EP initializationMarek Vasut2013-07-29-12/+26
| | | | | | | | | | | | | | | Move the constant values that are programmed into mv_ep.ep into separate static const structure so they can be memcpy()'d when the initialization happens. Moveover, we only every init NUM_ENDPOINTS, not 2 * NUM_ENDPOINTS, so fix this bug as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Move endpoint array into driver dataMarek Vasut2013-07-29-24/+24
| | | | | | | | | | | | | The endpoints are operated on a per-controller basis, move the endpoint array into controller's private data. Also shuffle the struct mv_ep structure definition just above the definition of the struct mv_drv so they're well grouped together. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* usb: mv_udc: Unbreak the mv_udc driverMarek Vasut2013-07-29-2/+7
| | | | | | | | | | | | The mv_udc driver is broken for a while and doesn't even compile. This patch fixes the issues and gets the driver into working state again. This driver was tested on Freescale i.MX233/i.MX28 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* Add LGPL-2.1+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-4/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-300/+24
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* usb: pxa27x_udc: fix compiler warningsMike Dunn2013-07-10-9/+5
| | | | | | | Newer gcc versions warn about unused variables. This patch corrects a few of those warnings that popped up in a build for the palmtreo680 board. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
* dfu: Update DFU's authorship historyŁukasz Majewski2013-07-10-0/+7
| | | | | | | | The DFU's state machine original implementation author and copyright were missing. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
* dfu:function: Fix number of allocated DFU function pointersLukasz Majewski2013-06-30-1/+1
| | | | | | | | | | | | | | | This subtle change fix problem with too small amount of allocated memory to store DFU function pointers. One needs to allocate extra space for sentinel NULL pointer in this array of function pointers. With the previous code, the NULL value overwrites malloc internal data and afterwards free(f_dfu->function) crashes. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb, g_dnl: make possibility to fixup the device_desc board specificHeiko Schocher2013-06-30-0/+7
| | | | | | | | | | | | add a weak dummy function g_dnl_fixup to add the possibility to update the device_desc board specific. Used on the upcoming siemens board support, where idVendor and idProduct is stored in an eeprom. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb, dfu gadget: switch to dfu mode in dfu_bindHeiko Schocher2013-06-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | - set in to_dfu_mode() f_dfu->dfu_state = DFU_STATE_dfuIDLE as after every to_dfu_mode call this is done, so move this into to_dfu_mode - switch in dfu_bind() into dfu mode: This fixes wrong "dfu-util -l" output, when calling "dfu-util -l" after a board reset, without doing a download before. See also discussion here: http://lists.denx.de/pipermail/u-boot/2013-June/157272.html Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Samuel Egli <samuel.egli@siemens.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* usb:composite: use memcpy to avoid unaligned accessPiotr Wilczek2013-06-30-1/+2
| | | | | | | | | | | This patch memcpy is used instead of an assignment to avoid unaligned access execption on some ARM platforms. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* drivers:usb: use get|put_unaligned_le16Piotr Wilczek2013-06-30-4/+4
| | | | | | | | | This patch use get|put_unaligned_le16 to access structure data to avoid data abort on some ARM platforms. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marex@denx.de>
* usb, composite: after unregister gadget driver set composite to NULLHeiko Schocher2013-06-12-0/+1
| | | | | | | | | | Without this, second usb_composite_register() call fails always with -EINVAL. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb: gadget: add Faraday FOTG210 USB gadget supportKuo-Jung Su2013-06-12-0/+957
| | | | | | | | The Faraday FOTG210 is an OTG chip which could operate as either an EHCI Host or a USB Device at a time. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Marek Vasut <marex@denx.de>
* usb: gadget: Use unaligned access for wMaxPacketSizeVivek Gautam2013-06-12-7/+9
| | | | | | | | | | | | Use get_unaligned() while fetching wMaxPacketSize to avoid voilating any alignment rules. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Dalek <luk0104@gmail.com> Cc: Marek Vasut <marex@denx.de>
* pxa27x_udc: remove call to unimplemented set_GPIO_mode()Mike Dunn2013-05-05-1/+3
| | | | | | | | | | | | | | If CONFIG_USB_DEV_PULLUP_GPIO is defined, a link error occurs because the set_GPIO_mode() helper function is not implemented. This function doesn't do much except make the code a little more readable, so I just manually coded its equivalent and removed the prototype from the header file. It is invoked no where else in the code. While I was at it, I noticed that two other function prototypes in the same header file are also neither implemented nor invoked anywhere, so I removed them as well. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
* usb:gadget: USB Mass Storage Gadget supportLukasz Majewski2013-03-18-0/+6
| | | | | | | | | | | | | | This patch adds the USB Mass Storage Gadget to u-boot New command called "ums" is implemented to provide access to on-device embedded persistent memory. USB Mass Storage is supposed to work on top of the USB Gadget framework Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
* usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernelPiotr Wilczek2013-03-18-0/+2793
| | | | | | | | | | | | | | | The f_mass_storage.c source file from v2.6.36 Linux kernel. commit 8876f5e7d3b2a320777dd4f6f5301d474c97a06c Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Jun 21 13:57:09 2010 +0200 USB: gadget: f_mass_storage: added eject callback Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
* usb:composite: USB Mass Storage - storage_common.c from Linux kernelLukasz Majewski2013-03-18-0/+653
| | | | | | | | | | | | | | | The storage_common.c source file from v2.6.36 Linux kernel. commit d26a6aa08b9f12b44fb1ee65625e7480d3d5bb81 Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Nov 9 14:15:23 2009 +0100 USB: g_mass_storage: code cleaned up and comments updated Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
* usb:composite:fix Provide function data when addressing device with only one ↵Lukasz Majewski2013-03-18-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | interface This commit fixes problems with some non-standard requests send with device address instead of interface address (bmRequestType.Receipent field). This happens with dfu-util (debian version: 0.5), which address non standard requests (like w_value=0x21 and bRequest=GET_DESCRIPTOR) to device. Without this fix, the above request is STALLED, and hence causes dfu-util to assume some standard configuration (packet size = 1024B instead of 4096B) In turn it displays following errors: Error obtaining DFU functional descriptor Warning: Assuming DFU version 1.0 Warning: Transfer size can not be detected ... Warning: Trying default transfer size 1024 This fix allows passing non-standard request to function setup code, where it shall be handled. Tested at: Trats (exynos4210) Tested with:DFU and UMS gadgets Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* usb: Fix bug when both DFU & ETHER are definedPantelis Antoniou2013-03-16-2/+8
| | | | | | | | | | | When both CONFIG_USB_GADGET & CONFIG_USB_ETHER are defined the makefile links objects twice. This patch uses a Makefile specific idiom of 'if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)' to handle the case. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* dfu: Properly zero out timeout valuePantelis Antoniou2013-03-16-0/+3
| | | | | | | Zero out timeout value; letting it filled with undefined values ends up with the dfu host hanging. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* g_dnl: Properly terminate string list.Pantelis Antoniou2012-12-17-0/+1
| | | | | | | Well, not terminating the list causes very interesting crashes. As in changing the vendor & product ID crashes. Fun. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* g_dnl: Issue connect/disconnect as appropriatePantelis Antoniou2012-12-17-1/+10
| | | | | | Call usb_gadget_connect/usb_gadget_disconnect in g_dnl_bind/g_dnl_unbind. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* pxa25x_udc: Remove usbdescriptors.hLukasz Dalek2012-12-17-1/+0
| | | | | | | usbdescriptors.h conflicts with linux/usb/ch9.h. Remove it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
* Remove obsolete header filePantelis Antoniou2012-11-27-1/+0
| | | | | | | usbdescriptors.h conflicts with linux/usb/ch9.h Remove it. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* musb-new: port of Linux musb driverIlya Yanok2012-11-20-2/+2
| | | | | | | | | | | | | | | | | | | | Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
generated by cgit v1.1 at 2024-09-13 03:58:15 +0000