summaryrefslogtreecommitdiff
path: root/drivers/usb/eth
Commit message (Collapse)AuthorAgeLines
* net: asix: Fix AX88772B when used with DriverModelJoshua Scott2016-09-09-0/+5
| | | | | | | | | | | | | | | | | | | A previous patch (net: asix: fix operation without eeprom) added a two-byte shift to the packet buffer when receiving a packet on the AX88772B. This shift was not included when the driver was updated to work with DriverModel. Testing on a Marvell DB-88F6820-ACM showed that the adapter was not functioning correctly (EHCI timeouts). This patch brings the two-byte shift to the DriverModel implementation of ops->recv (asix_eth_recv). Testing on the same board, we were able to TFTP a file over and confirm that the crc32 was correct. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: smsc95xx: Use correct get_unaligned functionsChris Packham2016-08-15-2/+2
| | | | | | | | | The __get_unaligned_le* functions may not be declared on all platforms. Instead, get_unaligned_le* should be used. On many platforms both of these are the same function. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* eth: asix88179: Add support for the driver modelAlban Bedel2016-08-09-0/+184
| | | | | | Adjust this driver to support driver model for Ethernet. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
* eth: asix88179: Prepare supporting the driver modelAlban Bedel2016-08-09-28/+47
| | | | | | | Change the prototype of a few functions to allow resuing the code for the driver model. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
* eth: asix88179: Fix receiving on big endian systemAlban Bedel2016-08-07-1/+1
| | | | | | | | | In asix_recv() the call to convert the endianess of the receive header was applied on the wrong variable. Instead of converting rx_hdr it converted pkt_hdr which is a pointer, and not yet initialiazed at this point. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
* eth: asix88179: Add VID:DID for Cypress GX3 USB Ethernet AdapterAlban Bedel2016-08-07-0/+2
| | | | | | | Added support for the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (VID_04b4/PID_3610). Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
* net: usb: r8152: Add DM supportStefan Roese2016-08-07-22/+221
| | | | | | | | | | | | | | Add support for driver model, so that CONFIG_DM_ETH can be defined and used with this driver. This patch also adds the read_rom_hwaddr() callback so that the ROM MAC address will be used to the DM part of this driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stephen Warren <swarren@nvidia.com> Cc: Ted Chen <tedchen@realtek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
* eth: asix88179: Print packet length properlyMateusz Kulikowski2016-04-01-1/+1
| | | | | | | | | Debug printf used '%u' to print size_t variable. This caused warnings on 64-bit machines. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* smsc95xx: fix operation on 64-bit systemsStephen Warren2016-04-01-2/+2
| | | | | | | | | | | | smsc95xx_read_reg() should calculate sizeof(*data) not sizeof(data) since data is a pointer, and the value pointed at is being transferred over USB, not the value of the pointer. This fixes operation of the driver in 64-bit builds, such as the Raspberry Pi 3. Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: eth: fix memalign() parameter orderStephen Warren2016-02-24-1/+1
| | | | | | | | | | The alignment and size were swapped, leading to malloc heap corruption. On my system, this sometimes caused U-Boot to crash during or after certain USB Ethernet operations. Fixes: c8c2797c3810 ("dm: usb: eth: Support driver model with USB Ethernet") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* usb: eth: add Realtek RTL8152B/RTL8153 DRIVERTed Chen2016-01-23-0/+3075
| | | | | | | | | | | This patch adds driver support for the Realtek RTL8152B/RTL8153 USB network adapters. Signed-off-by: Ted Chen <tedchen at realtek.com> [swarren, fixed a few compiler warnings] [swarren, with permission, converted license header to SPDX] [swarren, removed printf() spew during probe()] Signed-off-by: Stephen Warren <swarren at nvidia.com>
* dm: net: usb: Convert mcs7830 driver to support driver modelSimon Glass2016-01-12-0/+105
| | | | | | | Adjust this driver to support driver model for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: net: usb: Refactor mcs7830 driver ready for DM conversionSimon Glass2016-01-12-121/+144
| | | | | | | | | Remove stamp data and create common functions for the main Ethernet operations. This will make it easier to convert this driver to support driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* driver: usb: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha2015-11-12-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix below compilation warings happening for hikey_defconfig drivers/usb/eth/smsc95xx.c:698:56: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ include/common.h:109:26: note: in definition of macro ‘debug_cond’ printf(pr_fmt(fmt), ##args); \ ^ drivers/usb/eth/smsc95xx.c:698:2: note: in expansion of macro ‘debug’ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ drivers/usb/eth/smsc95xx.c:718:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ [-Wformat=] debug("Tx: len = %u, actual = %u, err = %d\n", ^ drivers/usb/eth/smsc95xx.c: In function ‘smsc95xx_recv’: drivers/usb/eth/smsc95xx.c:802:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; ^ drivers/usb/eth/smsc95xx.c:802:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-10-29-19/+4
|\
| * smsc95xx: Use zero length packets when RX fifo is emptyStefan Brüns2015-10-29-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | Using NAKs on empty RX fifo for bulk in transfers is the right choice for a interrupt driven model, but U-Boot uses polling and expects an immediate answer if there is no incoming packet. Using ZLP Bulk In Response (BIR) mode avoids unexpected timeouts in the host controller driver. As ZLP mode is reset default, there is no need to set it. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * smsc95xx: Fetch whole burst with 1 URB, avoid framing errorsStefan Brüns2015-10-28-3/+4
| | | | | | | | | | | | | | | | | | | | | | smsc95xx_recv() does not reassemble bursts spread over multiple URBs. If there is a lot of broadcast traffic, the fifo will fill up to the burst cap limit. Lowering the burst cap to the URB size ensures no packet spans multiple urbs. Caveat, lower limit for working burst cap is 5/33 HS/FS packets. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | dm: Rename dev_get_parentdata() to dev_get_parent_priv()Simon Glass2015-10-23-3/+3
|/ | | | | | | | The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass2015-09-11-0/+4
| | | | | | | Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Add driver-model supportSimon Glass2015-08-06-0/+142
| | | | | | | Add support for driver model, so that CONFIG_DM_ETH can be defined and used with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Prepare for conversion to driver modelSimon Glass2015-08-06-122/+150
| | | | | | | | At present struct eth_device is passed around all over the place. This does not exist with driver model. Add explicit arguments instead, so that with driver model we can pass the correct things. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Correct the error numbersSimon Glass2015-08-06-22/+26
| | | | | | | Instead of returning -1 on error, we should use a proper error number. Fix the code to conform to this. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZESimon Glass2015-08-06-5/+5
| | | | | | | The AX_ prefix comes from the Asix driver. Since this is not that, we should avoid this confusing prefix. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Sort the include filesSimon Glass2015-08-06-2/+3
| | | | | | Tidy up the include file order before adding more. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: usb: Add an errno.h header to usb_ether.cSimon Glass2015-08-06-0/+1
| | | | | | This is required on some platforms, so add it. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: asix: fix operation without eepromMarcel Ziswiler2015-08-05-6/+34
| | | | | | | | | | This patch fixes operation of our on-board AX88772B chip without EEPROM but with a ethaddr coming from the regular U-Boot environment. This is a forward port of some remaining parts initially implemented by Antmicro. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marek Vasut <marex@denx.de>
* dm: usb: eth: Add driver-model support to the asix driverSimon Glass2015-07-21-21/+216
| | | | | | | | This USB Ethernet driver is quite widely use. Allow it to work with CONFIG_DM_ETH enabled. Most of the code remains common but there is a new packet receive flow which is handled specially. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: usb: Adjust the USB_DEVICE() macro namingSimon Glass2015-07-21-2/+2
| | | | | | | | | In Linux USB_DEVICE() is used to declare a USB device by vendor/device ID. We should follow the same convention in U-Boot. Rename the existing USB_DEVICE() macro to U_BOOT_USB_DEVICE() and bring in the USB_DEVICE() macro from Linux for use in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: usb: eth: Support driver model with USB EthernetSimon Glass2015-07-21-0/+127
| | | | | | | | | | | | | At present USB Ethernet does not work with CONFIG_DM_ETH. Add driver model support to this feature, so that it can work alongside other Ethernet devices with driver model. It was found that quite a bit of code is common in most of the USB Ethernet drivers. Add this code to the common layer to reduce the amount of duplicate code needed in USB Ethernet drivers when CONFIG_DM_ETH is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* net: cosmetic: Fix var naming net <-> eth driversJoe Hershberger2015-04-18-4/+6
| | | | | | | | | | | | | | | Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Name ethaddr variables consistentlyJoe Hershberger2015-04-18-1/+1
| | | | | | | | Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: usb: Add support for USB ethernet devices with driver modelSimon Glass2015-04-18-8/+44
| | | | | | | | | Add support for scanning USB etghernet devices with driver model. This mostly involves scanning all buses since device numbering is not unique across buses. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: eth: asix: Build warning fixes for 64-bitThierry Reding2015-04-14-1/+1
| | | | | | | Fix a type mismatch in a printf format string. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
* usb: eth: asix88179: add ability to modify MAC addressRene Griessl2015-01-18-0/+14
| | | | | | | This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250) Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* usb: eth: add ASIX AX88179 DRIVERRene Griessl2014-12-31-0/+708
| | | | | | | | | | This patch adds driver support for the ASIX AX88179 USB3.0 to GbE network adapter. Driver has been tested on the RECS5250 COM module (similar to ARDALE5250). Testcase was DHCP and PXE boot. Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* usb: eth: fix MakefileRene Griessl2014-11-07-3/+1
| | | | | | fix obj-y term Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* net: asix: Add support for AX88772BAlexandre Courbot2014-10-22-0/+1
| | | | | | This USB device works as-is on this driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
* net: usb: Add SMSC copyright to smsc95xx driverSimon Glass2014-09-16-0/+1
| | | | | | | | | | | | | | | This driver was upstreamed without an SMSC copyright, even thought it seems that SMSC was the original author. See the kernel version for a code comparison: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2f7ca802bdae2ca41022618391c70c2876d92190 It's not clear who actually moved this code, or whether the kernel was the original source, or somewhere else, but it probably should still have the SMSC copyright. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: eth: smsc95xx: add LAN9500A device IDIlya Ledvich2014-06-25-0/+1
| | | | | | | | Add LAN9500A product ID (0x9e00) in order to support LAN9500A based dongles. Tested on cm_t335. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Acked-by: Marek Vasut <marex@denx.de>
* usb: cosmetic: double constJeroen Hofstee2014-06-25-2/+2
| | | | | | | | | For plain array const can be either before or after the type definition. Adding both is simply redundand. Remove the later one. cc: marex@denx.de Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* usb: net: introduce support for Moschip USB ethernetGerhard Sittig2014-03-12-0/+820
| | | | | | | | | | | | | | | introduce an 'mcs7830' driver for Moschip MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices see "MCS7830 -- USB 2.0 to 10/100M Fast Ethernet Controller" at http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=109;74;109 the driver was implemented based on the U-Boot Asix driver with additional information gathered from the Moschip Linux driver, development was done on "Delock 61147" and "Logilink UA0025C" dongles Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* net: asix: don't pad odd-length TX packetsStephen Warren2014-03-07-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | For Ethernet/USB RX packets, the ASIX HW pads odd-sized packets so that they have an even size. Currently, asix_recv() does remove this padding, and asic_send() adds equivalent padding in the TX path. However, the HW does not appear to need this packing for TX packets in practical testing with "ASIX Elec. Corp. AX88x72A 000001" Vendor: 0x0b95 Product 0x7720 Version 0.1. The Linux kernel does no such padding for the TX path. Remove the padding from the TX path: * For consistency with the Linux kernel. * NVIDIA has a Tegra simulator which validates that the length of USB packets sent to an ASIX device matches the packet length value inside the packet data. Having U-Boot and the kernel do the same thing when creating the TX packets simplifies the simulator's validation. Cc: Lucas Stach <dev@lynxeye.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Gerhard Sittig <gsi@denx.de>
* drivers: usb: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-25/+3
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* usb:smsx95xx LED activity for USB net driverSuriyan Ramasami2013-10-20-0/+14
| | | | | | | Add LED activity for SMSX95XX USB Ether driver. Signed-off-by: “Suriyan Ramasami" <suriyan.r@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: smsc95xx: Add support for another SMSC95xx variantStefan Roese2013-08-19-0/+1
| | | | | | | | | This patch adds support for the SMSC9500 with product id 0x9900 which is equipped in the "EXSYS USB 2.0" etherner USB adapter. Tested on omap3_beagle. Signed-off-by: Stefan Roese <sr@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-65/+4
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* usb: add support for the USB Ethernet adapter D-Link DUB-E100 H/W Ver C1Pierre Aubert2013-06-30-0/+1
| | | | | | | | This trivial patch adds the definition of the vid/pid for the Ver C1 of the USB Ethernet adapter D-Link DUB-E100. Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Marek Vasut <marex@denx.de>
* usb: asix: Move software resets to basic_initJulius Werner2013-06-12-23/+17
| | | | | | | | | | | | | | | | | | | | | | | | The ASIX driver calls a basic_init() function during get_info(), so that not all initialization tasks need to be redone on every init(). Unfortunately, the most important one is still triggered too often: the driver does a full port and MII reset on every asix_init(), requiring up to several seconds to reestablish the link. This patch confines that software reset into the asix_basic_init() function so that it will only be executed once. This saves about a second of boot time on systems using BOOTP. Note: this patch was previously submitted many moons ago as: usb: usbeth: asix: Do a fast init if link already established That patch seens to have been lost or forgotten, so this is a rebased version. It is tested on snow with a Asix USB dongle (Cisco). Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* OMAP5: Enable USB Ethernet support with LAN9730Lubomir Popov2013-05-14-0/+1
| | | | | | | | Added the LAN9730 to list of supported devices. This chip is used in the sEVM, uEVM and som5_evb. Tested on the som5_evb with dhcp and ping. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
* usb: usbeth: smsc95xx: remove EEPROM loaded checkMichael Spang2013-03-18-4/+0
| | | | | | | | | | | | [port of Linux kernel commit bcd218be5aeb by Steve Glendinning] The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is set before allowing any operations. This prevents any reading or writing unless a correctly programmed EEPROM is installed. Signed-off-by: Michael Spang <spang@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-08 08:54:23 +0000