summaryrefslogtreecommitdiff
path: root/drivers/spi
Commit message (Collapse)AuthorAgeLines
* spi: Add driver for Marvell Armada 3700 SoCStefan Roese2016-09-27-0/+303
| | | | | | | | | | | | | | | | | | The SPI IP core in the Marvell Armada 3700 is similar to the one in the other Armada SoCs. But the differences are big enough that it makes sense to introduce a new driver instead of cluttering the old kirkwood driver with #ifdef's. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-6/+6
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-09-22-36/+51
|\
| * spi: Kconfig: Move FSL_QSPI entry to non-dm placeJagan Teki2016-09-22-7/+7
| | | | | | | | | | | | | | | | | | Since FSL_QSPI driver still supporting non-dm code better to move the Kconfig from DM undefined place. Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
| * spi: Use mode for rx mode flagsJagan Teki2016-09-22-15/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
| * spi: ti_qspi: Remove unnecessary udelay for AM437xVignesh R2016-09-22-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | This udelay() was added as an HACK and is no longer required. All read/write/erase operations work fine even without this delay. Hence, remove the udelay() call. Tested read/write/erase operation on AM437x SK. Also tested QSPI Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * spi: ti_qspi: use 128 bit transfer mode when writing to flashVignesh R2016-09-22-6/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI QSPI has four 32 bit data registers which can be used to transfer 16 bytes of data at once. The register group QSPI_SPI_DATA_REG_3, QSPI_SPI_DATA_REG_2, QSPI_SPI_DATA_REG_1 and QSPI_SPI_DATA_REG is treated as a single 128-bit word for shifting data in and out. The bit at QSPI_SPI_DATA_REG_3[31] position is the first bit to be shifted out in case of 128 bit transfer mode. Therefore the first byte to be written to flash should be at QSPI_SPI_DATA_REG_3[31-25] position. Instead of writing 1 byte at a time when interacting with SPI NOR flash, make use of all the four registers so that 16 bytes can be transferred in one go. With this patch, the flash write speed increases from ~250KBs/ to ~650KB/s on DRA74 EVM. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * spi: zynq_spi: Fix infinite looping while xferLad, Prabhakar2016-09-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During spi transfer, for example: sspi 1:1.0 8 ff the rx_len values will be: rx_len = 0 rx_len = 4294967295 This caused a busy looping during xfer, this patch fixes it by adding a check while reading the rx fifo Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | spi: zynq: Use variable to remove u32 to u64 conversionsMichal Simek2016-09-22-2/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code generates warning when it is compiled for arm64: Warnings: In file included from drivers/spi/zynq_spi.c:14:0: drivers/spi/zynq_spi.c: In function ‘zynq_spi_init_hw’: drivers/spi/zynq_spi.c:95:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &regs->enr); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/spi/zynq_spi.c: In function ‘zynq_spi_release_bus’: drivers/spi/zynq_spi.c:177:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &regs->enr); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ This patch is using one variable to do conversion via u32 variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: tegra: fix hang in set_mode()Stephen Warren2016-08-25-0/+11
| | | | | | | | | | | | | | | | | | | | | | In tegra20_slink.c, the set_mode() function may be executed before the SPI bus is claimed the first time, and hence the clocks to the SPI controller may not be running. If so, any register read/write at this time will hang the CPU. Fix this by ensuring the clock is running as soon as the driver is probed. This is observed on the Tegra30 Beaver board. Apply the same clock initialization fix to all other Tegra SPI drivers so that if set_mode() is ever implemented there, the same bug will not appear. Note that tegra114_spi.c already operates in this fashion. The clock manipulation code is copied from claim_bus() to probe() rather than moved. This ensures that any calls to set_speed() take effect; the clock can't be set once during probe and left unchanged. Fixes: 5cb1b7b395c0 ("spi: tegra20: Add support for mode selection") Cc: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max valueChin Liang See2016-08-07-2/+5
| | | | | | | | | | | | | | | | Ensuring the baudrate divisor value doesn't exceed the max value in the calculation.It will be capped at max value to ensure the correct value being written into the register. Example of the existing bug is when calculated div = 16. After and with the mask, the value written to register is actually 0 (register field for baudrate divisor). With this fix, the value written is now 15 which is max value for baudrate divisor. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jteki@openedev.com> Cc: Dinh Nguyen <dinguyen@altera.com>
* driver: spi: fsl-qspi: remove compile WarningsYunhui Cui2016-08-02-1/+3
| | | | | | | | | | Warnins log: drivers/spi/fsl_qspi.c: In function ‘qspi_ahb_read’: drivers/spi/fsl_qspi.c:400:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] memcpy(rxbuf, (u8 *)(priv->cur_amba_base + priv->sf_addr), len); Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* spi: ti_qspi: dra7xx: Add support to use 76.8MHz clockVignesh R2016-07-30-5/+12
| | | | | | | | | | According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, update the driver to use the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* spi: ti_qspi: Remove delay in read path for dra7xxVignesh R2016-07-30-3/+0
| | | | | | | | | | | | As per commit b545a98f5dc563 ("spi: ti_qspi: Add delay for successful bulk erase) says its added to meet bulk erase timing constraints. But bulk erase is a cmd to flash and delay in read path does not make sense. Morever, testing on DRA74/DRA72 evm has shown that this delay is no longer required. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* spi: ti_qspi: Fix compiler warning when DEBUG macro is setVignesh R2016-07-30-2/+2
| | | | | | | | | | clk_div is uninitialized at the beginning of ti_spi_set_speed(), move debug() print after clk_div calculation to avoid compiler warning and to have proper value of clk_div printed during debugging. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* spi: ti_qspi: Fix failure on multiple READ_ID cmdVignesh R2016-07-30-3/+2
| | | | | | | | | | | | | | Populating QSPI_RD_SNGL bit(0x1) in priv->cmd means that value QSPI_INVAL (0x4) is not written to CMD field of QSPI_SPI_CMD_REG in ti_qspi_cs_deactivate(). Therefore CS is never deactivated between successive READ ID which results in sf probe to fail. Fix this by not populating priv->cmd with QSPI_RD_SNGL and OR it wih priv->cmd as required (similar to the convention followed in the driver). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass2016-07-27-7/+1
| | | | | | | Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass2016-07-27-2/+1
| | | | | | | This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: spi: Read default speed and mode values from DTVignesh R2016-07-09-2/+6
| | | | | | | | | | | | In case of DT boot, don't read default speed and mode for SPI from CONFIG_*, instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: cadence_quadspi: Enable QUAD mode based on DT dataVignesh R2016-07-09-7/+8
| | | | | | | | | | | | Instead of relying on CONFIG_SPI_FLASH_QUAD to be defined to enable QUAD mode, make use of mode_rx field of dm_spi_slave_platdata to determine whether to enable or disable QUAD mode. This is necessary to support muliple SPI controllers where one of them may not support QUAD mode. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: cadence_qspi_apb: Support 32 bit AHB addressVignesh R2016-07-09-3/+2
| | | | | | | | | | | AHB address can be as long as 32 bit, hence remove the CQSPI_REG_INDIRECTRDSTARTADDR mask. Since AHB address is passed from DT and read as u32 value, it anyway does not make sense to mask upper bits. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: davinci_spi: Convert to driver to adapt to DMVignesh R2016-07-09-89/+240
| | | | | | | | Convert davinci_spi driver so that it complies with SPI DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: spi-uclass: fix typo in debug outputAnatolij Gustschin2016-07-06-1/+1
| | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* driver: qspi: correct QSPI disable CS reset valuePraneeth Bajjuri2016-07-01-1/+1
| | | | | | | | | | | Correcting QSPI disable/unselect CS reset value. CTRL_CORE_CONTROL_IO_2: QSPI_MEMMAPPED_CS[10:8] This is not causing any issue, but its better to untouch the reserved bits. Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com>
* clk: convert API to match reset/mailbox styleStephen Warren2016-06-19-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes are made to the clock API: * The concept of "clocks" and "peripheral clocks" are unified; each clock provider now implements a single set of clocks. This provides a simpler conceptual interface to clients, and better aligns with device tree clock bindings. * Clocks are now identified with a single "struct clk", rather than requiring clients to store the clock provider device and clock identity values separately. For simple clock consumers, this isolates clients from internal details of the clock API. * clk.h is split so it only contains the client/consumer API, whereas clk-uclass.h contains the provider API. This aligns with the recently added reset and mailbox APIs. * clk_ops .of_xlate(), .request(), and .free() are added so providers can customize these operations if needed. This also aligns with the recently added reset and mailbox APIs. * clk_disable() is added. * All users of the current clock APIs are updated. * Sandbox clock tests are updated to exercise clock lookup via DT, and clock enable/disable. * rkclk_get_clk() is removed and replaced with standard APIs. Buildman shows no clock-related errors for any board for which buildman can download a toolchain. test/py passes for sandbox (which invokes the dm clk test amongst others). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* spi: pic32_spi: add SPI master driver for PIC32 SoC.Purna Chandra Mandal2016-06-10-0/+457
| | | | | | | | | | | | This driver implements SPI protocol in master mode to communicate with the SPI device connected on SPI bus. It handles /CS explicitly by controlling respective pin as gpio ('cs-gpios' property in dt node) and uses PIO mode for SPI transaction. It is configurable based on driver-model only. Cc: Jagan Teki <jteki@openedev.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-05-24-37/+122
|\
| * spi: fsl_qspi: Enable Spansion S25FS-S family flashesYuan Yao2016-05-18-6/+52
| | | | | | | | | | | | | | | | | | | | The flash type of LS2085AQDS QSPI is S25FS256S. It has special write any device register command and read any device register command. This patch enable support for those commands. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * spi: fsl_qspi: Assign AMBA mem according CS num in dtsYuan Yao2016-05-18-12/+43
| | | | | | | | | | | | | | | | | | | | | | QSPI controller automatic enable the chipselect signal according the dest AMBA memory address. Now we distribute the AMBA memory zone averagely to every chipselect slave device according chipselect numbers got from dts node. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * spi: fsl_qspi: Fix issues on arm64Yuan Yao2016-05-18-19/+27
| | | | | | | | | | | | | | | | | | | | | | The address value and size value get from dts "reg" property have type of u64 on arm64. If we assign those values to "u32" variables, driver can't work correctly. Converting the type of those variables to fdt_xxx_t. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-05-23-0/+238
|\ \
| * | ath79: spi: Remove the explicit pinctrl settingWills Wang2016-05-21-12/+0
| | | | | | | | | | | | | | | | | | | | | The correct pinctrl is handled automatically so we don't need to do it in the driver. Signed-off-by: Wills Wang <wills.wang@live.com>
| * | drivers: spi: add spi support for QCA/Atheros ath79 SOCsWills Wang2016-05-21-0/+250
| | | | | | | | | | | | | | | | | | | | | | | | This patch add a compatible spi driver for ath79 series SOC. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | | omap3: Fix SPI registers on am33xx and am43xxMartin Hejnfelt2016-05-23-3/+20
|/ / | | | | | | | | | | | | | | | | | | | | | | | | When the base registers are read from device tree the base is not 0x48030100 as the driver expects, but 0x48030000, resulting in non functioning SPI. To deal with this, use same idea as how this is done in the linux kernel (drivers/spi/spi-omap2-mcspi.c) and add a structure with a field that is used to shift the registers on these systems. v2: Fixed commit subject line to correct cpu Signed-off-by: Martin Hejnfelt <mh@newtec.dk>
* | dm: spi: introduce dm apiPeng Fan2016-05-17-7/+21
| | | | | | | | | | | | | | | | | | | | | | Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dm: spi: soft_spi: switch to use linux compatible stringPeng Fan2016-05-17-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Support compatible string "spi-gpio" which is used by Linux Linux use different bindings, so use UBOOT_COMPAT and LINUX_COMPAT to differentiate them. 2. Introduce SPI_MASTER_NO_RX and SPI_MASTER_NO_TX to handle no rx or no tx case. 3. Tested on i.MX6 UltraLite board with 74LV595 spi-gpio chip. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | dm: spi: soft_spi bug fixPeng Fan2016-05-17-7/+12
|/ | | | | | | | | | | When doing xfer, should use device->parent, but not device When doing bit xfer, should use "!!(tmpdout & 0x80)", but not "(tmpdout & 0x80)" Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* mtd: cqspi: Simplify indirect read codeMarek Vasut2016-05-06-71/+57
| | | | | | | | | | | | | | | | | | | The indirect read code is a pile of nastiness. This patch replaces the whole unmaintainable indirect read implementation with the one from upcoming Linux CQSPI driver, which went through multiple rounds of thorough review and testing. All the patch does is it plucks out duplicate ad-hoc code distributed across the driver and replaces it with more compact code doing exactly the same thing. There is no speed change of the read operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Jagan Teki <jteki@openedev.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vignesh R <vigneshr@ti.com>
* mtd: cqspi: Simplify indirect write codeMarek Vasut2016-05-06-96/+30
| | | | | | | | | | | | | | | | | | | | | | | | | The indirect write code is buggy pile of nastiness which fails horribly when the system runs fast enough to saturate the controller. The failure results in some pages (256B) not being written to the flash. This can be observed on systems which run with Dcache enabled and L2 cache enabled, like the Altera SoCFPGA. This patch replaces the whole unmaintainable indirect write implementation with the one from upcoming Linux CQSPI driver, which went through multiple rounds of thorough review and testing. While this makes the patch look terrifying and violates all best-practices of software development, all the patch does is it plucks out duplicate ad-hoc code distributed across the driver and replaces it with more compact code doing exactly the same thing. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Jagan Teki <jteki@openedev.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vignesh R <vigneshr@ti.com>
* spi: kirkwood_spi: Add support for multiple chip-selects on MVEBUStefan Roese2016-04-06-0/+14
| | | | | | | | | | | | | Currently only chip-select 0 is supported by the kirkwood SPI driver. The Armada XP / 38x SoCs also use this driver and support multiple chip selects. This patch adds support for multiple CS on MVEBU. The register definitions are restructured a bit with this patch. Grouping them to the corresponding registers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: kirkwood_spi.c: Add compatible match ID for Armada 375Stefan Roese2016-04-04-0/+1
| | | | | | | | This enables this driver for the Marvell Armada 375 SoC. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviwer-by: Jagan Teki <jteki@openedev.com>
* spi: omap3: Fix multiple definition of 'priv'Jagan Teki2016-03-15-19/+21
| | | | | | | | | | | | | Global definition of priv seems no-sense to use it for non-dm case and pass the pointer to functions which are common to both dm and non-dm. So, fix this by removing omap3_spi_slave from non-dm and make visible to omap3_spi_priv for both dm and non-dm. Cc: Christophe Ricard <christophe-h.ricard@st.com> Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
* spi: omap3: Convert to driver modelJagan Teki2016-03-14-270/+416
| | | | | | | | | | | | | | | After this conversion the driver will able to support both dm and non-dm and code is more extensible like we can remove the non-dm part simply without touching anycode if all the boards which are using this driver become dm driven. Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Tested-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Jagan Teki <jteki@openedev.com> [Set priv->wordlen, Add Kconfig entry and file credit for dm conversion] Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* spi: omap3: Make local functions as staticJagan Teki2016-03-14-6/+6
| | | | | | | | | Attach static on local defined functions. Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* spi: omap3: Move headers code inside the driverJagan Teki2016-03-14-111/+86
| | | | | | | | | | | | Header file have macro's and register definition and some unneeded function proto types which becomes tunned further in future patches and entire driver code resides in one file for more readability. Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> [Fixes on code styles, Remove omap3_spi_txrx|write|read in header] Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* dm: ti_qspi: Fix conversion of address to a pointerLokesh Vutla2016-03-12-3/+7
| | | | | | | | | | | | | | TI QSPI driver directly typecasts fdt_addr_t to a pointer. This is not strictly correct, as it gives a build warning when fdt_addr_t is u64. So, use map_physmem for a proper typecasts. This is inspired by commit 167efe01bc5a9 ("dm: ns16550: Use an address instead of a pointer for the uart base") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLENChristophe Ricard2016-02-23-0/+1
| | | | | | | | In some case wordlen may not be set. Use SPI_DEFAULT_WORDLEN as default. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: omap3: Remove unused variable irqstatus in omap3_spi_txrxChristophe Ricard2016-02-23-2/+0
| | | | | | | | Remove unused variable irqstatus in omap3_spi_txrx Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is definedMugunthan V N2016-02-23-1/+1
| | | | | | | | | | When CONFIG_DMA is defined the default spi_flash_copy_mmap() can handle dma memory copy, so compile out spi_flash_copy_mmap() from ti_qspi driver when CONFIG_DMA config is defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* dm: pch: Rename get_sbase op to get_spi_baseBin Meng2016-02-05-1/+1
| | | | | | | | Spell out 'sbase' to 'spi_base' so that it looks clearer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-02 00:41:36 +0000