summaryrefslogtreecommitdiff
path: root/drivers/serial
Commit message (Collapse)AuthorAgeLines
* S5P: Serial: Add fdt support to driverRajeshwari Shinde2013-06-24-0/+78
| | | | | | | | | | | | | | This patch adds FDT support to the serial s5p driver. At present disabling the serial console (from the device tree) crashes U-Boot. Add checks for this case, so that execution can continue without a serial console. It also enables the serial_s5p driver recognize the silent_console option. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-19-4/+9
|\ | | | | | | | | Conflicts: spl/Makefile
| * Exynos: uart: s5p: enabling the uart tx/rx fifoAkshay Saraswat2013-05-21-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | This patch enables the uart tx/rx fifo. Now that fifo is enabled, the uart read/write functions are modfied to check the UFSTAT register for fifo status instead of UTRSTAT (as required with fifo's enabled). Tested by booting linux kernel. Before enabling tx/rx fifo "Uncompressing linux" message is garbled and after enabling it is proper. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm: Remove OMAP2420H4 and all omap24xx supportTom Rini2013-06-10-10/+0
| | | | | | | | | | | | | | | | | | The omap2420H4 was the only mainline omap24xx board. Prior to being fixed by Jon Hunter in time for v2013.04 it had been functionally broken for a very long time. Remove this board as there's not been interest in it in U-Boot for quite a long time. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-08-0/+133
|\ \ | | | | | | | | | | | | Conflicts: drivers/serial/Makefile
| * | arm: vf610: Add uart support for Vybrid VF610Alison Wang2013-06-03-0/+133
| |/ | | | | | | | | | | | | This patch adds lpuart support for Vybrid VF610 platform. Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Alison Wang <b18965@freescale.com>
* | Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-15-2/+0
| | | | | | | | | | | | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
* | blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang2013-05-13-0/+412
|/ | | | | | | | - Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-2/+2
|\ | | | | | | | | Conflicts: drivers/video/exynos_fb.c
| * Consolidate bool typeYork Sun2013-04-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* | arm: Remove support for unused s3c64xxBenoît Thébaudeau2013-04-12-190/+0
| | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so remove associated code. It will still be possible to restore it later from the Git history if necessary. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | omap3_beagle: Flush UART3 xmit on enable if TEMT is brokenManfred Huber2013-04-08-2/+16
|/ | | | | | | | | | | | Flush UART3 xmit on enable if TEMT is broken On some OMAP3 devices when UART3 is configured for boot mode before SPL starts only THRE bit is set. We have to empty the transmitter before initialization starts. This patch avoids the use of CONFIG_SYS_NS16550_BROKEN_TEMT. Signed-off-by: Manfred Huber <man.huber@arcor.de> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
* ns16550: enable quirks for ti814xMatt Porter2013-03-24-2/+3
| | | | | | | TI814X requires the same quirks as AM33XX to be enabled. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-03-18-1/+1
|\
| * usbtty: adapt buffers for large packet supportShiraz Hashim2013-03-16-1/+1
| | | | | | | | | | | | | | Increase buffer sizes at driver and tty level to accommodate kermit large packet support. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-18-221/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * Merge u-boot/master into u-boot-ti/masterTom Rini2013-03-11-6/+50
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: ns9750dev: remove remainders of dead boardWolfgang Denk2013-02-28-221/+0
| | | | | | | | | | | | | | | | | | | | | | | | Commit 8b710b1 started removing code for the unmaintained "ns9750dev" board; the board support is still broken, and not included anywhere in the Makefile or boards.cfg. Remove the remaining dead code. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | serial: ns16550: Remove unwanted castSimon Glass2013-03-15-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | This cast does not seem correct, since we should be writing to a pointer, not a ulong. This fixes the following warning on nds32: -ns16550.c:49: warning: passing argument 2 of 'writeb' makes pointer from integer without a cast Signed-off-by: Simon Glass <sjg@chromium.org>
* | sandbox: Improve sandbox serial port keyboard interfaceTaylor Hutt2013-02-28-6/+38
| | | | | | | | | | | | | | | | | | | | | | Implements the tstc() interface for the serial driver. Multiplexing the console between the serial port and a keyboard uses a polling method of checking if characters are available; this means that the serial console must be non-blocking when attempting to read characters. Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | serial/ns16550: don't generate functions for undefined portsScott Wood2013-02-19-0/+12
|/ | | | | | | This saved 640 bytes on MPC8536DS (a board with two of the six ports defined). Signed-off-by: Scott Wood <scottwood@freescale.com>
* serial: arm_dcc: Fix compilation warning and remove unneeded initializationMichal Simek2013-02-04-5/+0
| | | | | | | | | | | - arm_dcc_dev is already initialized. - Remove unused rc variable Warning log: arm_dcc.c: In function 'drv_arm_dcc_init': arm_dcc.c:145:6: warning: unused variable 'rc' [-Wunused-variable] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI optionMichal Simek2013-02-04-11/+5
| | | | | | | | | | | | | | | CONFIG_ARM_DCC_MULTI should be also removed in the patch "serial: Remove CONFIG_SERIAL_MULTI from serial drivers" (sha1: a3827250606895ec2dd4b8d867342b7cabf3692f) Because the driver defines serial_* functions which cause conflict with serial.c (multiple definition of serial_*) Removing CONFIG_SERIAL_MULTI function also require to define default_serial_console for cases where another serial driver is not available in the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-01-11-0/+2
|\
| * serial/ns16550: add an option to avoid hanging on broken platformsJavier Martinez Canillas2013-01-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that does not set the TEMT bit when the transmitter is empty in SPL. This makes U-Boot to hang while waiting for TEMT to be set. Add a new option to avoid this: CONFIG_SYS_NS16550_BROKEN_TEMT 16550 UART set the Transmitter Empty (TEMT) Bit when all output has finished and the transmitter is totally empty. U-Boot waits for this bit to be set to initialize the serial console. On some broken platforms this bit is not set in SPL making U-Boot to hang while waiting for TEMT. Define this option to avoid it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-12-22-1/+2
|\ \ | |/
| * Merge remote-tracking branch 'u-boot/master' into u-boot-arm-mergedAllen Martin2012-12-19-9/+92
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * | s3c64xx: fix the compiler error and warningMinkyu Kang2012-11-15-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is fixing the following errors s3c64xx.c:175: error: variable 's3c64xx_serial_drv' has initializer but incomplete type s3c64xx.c:176: error: unknown field 'name' specified in initializer s3c64xx.c:176: warning: excess elements in struct initializer s3c64xx.c:176: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:177: error: unknown field 'start' specified in initializer s3c64xx.c:177: warning: excess elements in struct initializer s3c64xx.c:177: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:178: error: unknown field 'stop' specified in initializer s3c64xx.c:178: warning: excess elements in struct initializer s3c64xx.c:178: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:179: error: unknown field 'setbrg' specified in initializer s3c64xx.c:179: warning: excess elements in struct initializer s3c64xx.c:179: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:180: error: unknown field 'putc' specified in initializer s3c64xx.c:180: warning: excess elements in struct initializer s3c64xx.c:180: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:181: error: unknown field 'puts' specified in initializer s3c64xx.c:181: warning: excess elements in struct initializer s3c64xx.c:181: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:182: error: unknown field 'getc' specified in initializer s3c64xx.c:182: warning: excess elements in struct initializer s3c64xx.c:182: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:183: error: unknown field 'tstc' specified in initializer s3c64xx.c:183: warning: excess elements in struct initializer s3c64xx.c:183: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c: In function 's3c64xx_serial_initialize': s3c64xx.c:188: warning: implicit declaration of function 'serial_register' s3c64xx.c: At top level: s3c64xx.c:191: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'struct' Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
* | | serial_sh: Add support Renesas SH7752Yoshihiro Shimoda2012-12-20-1/+1
| |/ |/| | | | | | | Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | env: Add a baudrate env handlerJoe Hershberger2012-12-13-0/+70
| | | | | | | | | | | | Remove the hard-coded baudrate handler and use a callback instead Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | serial_pl011: Set RTS during initializationJoshua Housh2012-12-07-2/+2
| | | | | | | | | | | | | | | | | | | | | | If the pl011 is connected to another device which has hardware flow-control on, characters are never received by the pl011. Asserting RTS when flow-control is off will have no effect. This is in line with how Linux behaves. Signed-off-by: Joshua Housh <joshua.housh@calxeda.com> Tested-by: Marek Vasut <marex@denx.de>
* | serial: serial_sh: bugfix: autoboot fails if serial console is not connectedTetsuyuki Kobayashi2012-11-30-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On kzm9g board (rmobile SoC), autoboot fails if serial console cable is not connected. When serial cable is not connected, serial error occurs and some garbage comes in data register. sh_serial_tstc() in serial_sh.c does not check error status and misunderstand there is some input data. It is the reason that autoboot fails. This patch adds checking error status in sh_serial_tstc(). This patch is based on v2013.01-rc1 tag of u-boot master git. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | serial/ns16550: wait for TEMT before initializingScott Wood2012-11-26-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | TEMT is set when the transmitter is totally empty and all output has finished. This prevents output problems (including a loss of synchronization observed on p2020 that persisted for quite a while) if SPL has output still on its way out. Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: fixed typo in subject, and explained what the bit does in the changelog
* | serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONSScott Wood2012-11-26-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_NS16550_MIN_FUNCTIONS is used by small SPLs to gain access to basic ns16550 output code without pulling in things not needed by the SPL. This previously only worked with non-MULTI configs. Recently MULTI was made mandatory, and MIN_FUNCTIONS fails like this: drivers/serial/libserial.o: In function `calc_divisor.clone.0': serial_ns16550.c:(.text.calc_divisor.clone.0+0x24): undefined reference to `get_bus_freq' drivers/serial/libserial.o: In function `_serial_getc': (.text._serial_getc+0x30): undefined reference to `NS16550_getc' drivers/serial/libserial.o: In function `_serial_tstc': (.text._serial_tstc+0x30): undefined reference to `NS16550_tstc' drivers/serial/libserial.o: In function `_serial_setbrg': (.text._serial_setbrg+0x3c): undefined reference to `NS16550_reinit' make[1]: *** [/tmp/u-boot/spl/u-boot-spl] Error 1 make: *** [/tmp/u-boot/spl/u-boot-spl.bin] Error 2 With MIN_FUNCTIONS we don't need anything from this file, so don't build it. The conditional needs to be in the file itself rather than the makefile, because the config symbols are only imported to the makefiles once, not separately for the SPL phase of the build. Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-05-3/+33
|\
| * Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD2012-11-03-3/+33
| |\
| | * serial: ns16550: Enable COM5 and COM6Andrew Bradford2012-10-25-3/+33
| | | | | | | | | | | | | | | | | | Increase the possible number of ns16550 serial devices from 4 to 6. Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
* | | drivers/serial/serial_ns16550.c: sparse fixesKim Phillips2012-11-04-15/+27
| | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | include/linux/byteorder: import latest endian definitions from linuxKim Phillips2012-11-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot's byteorder headers did not contain endianness attributions for use with sparse, causing a lot of false positives. Import the kernel's latest definitions, and enable them by including compiler.h and types.h. They come with 'const' added for some swab functions, so fix those up, too: include/linux/byteorder/big_endian.h:46:2: warning: passing argument 1 of '__swab64p' discards 'const' qualifier from pointer target type [enabled by default] Also, note: u-boot's historic __BYTE_ORDER definition has been preserved (for the time being at least). We also remove ad-hoc barrier() definitions, since we're including compiler.h in files that hadn't in the past: macb.c:54:0: warning: "barrier" redefined [enabled by default] In addition, including compiler.h in byteorder changes the 'noinline' definition to expand to __attribute__((noinline)). This fixes arch/powerpc/lib/bootm.c: bootm.c:329:16: error: attribute '__attribute__': unknown attribute bootm.c:329:16: error: expected ')' before '__attribute__' bootm.c:329:25: error: expected identifier or '(' before ')' token powerpc sparse builds yield: include/common.h:356:22: error: marked inline, but without a definition the unknown-reason inlining without a definition is considered obsolete given it was part of the 2002 initial commit, and no arm version was 'fixed.' also fixed: ydirectenv.h:60:0: warning: "inline" redefined [enabled by default] and: Configuring for devconcenter - Board: intip, Options: DEVCONCENTER make[1]: *** [4xx_ibm_ddr2_autocalib.o] Error 1 make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2 powerpc-fsl-linux-size: './u-boot': No such file 4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration': include/asm/ppc4xx-sdram.h:1407:13: sorry, unimplemented: inlining failed in call to 'ppc4xx_ibm_ddr2_register_dump': function body not available 4xx_ibm_ddr2_autocalib.c:1243:32: sorry, unimplemented: called from here and: In file included from crc32.c:50:0: crc32table.h:4:1: warning: implicit declaration of function '___constant_swab32' [-Wimplicit-function-declaration] crc32table.h:4:1: error: initializer element is not constant crc32table.h:4:1: error: (near initialization for 'crc32table_le[0]') Signed-off-by: Kim Phillips <kim.phillips@freescale.com> [trini: Remove '#endif' in include/common.h around setenv portion] Signed-off-by: Tom Rini <trini@ti.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-10-26-805/+0
|\ \ \ | |/ /
| * | stdio: Remove the CLPS7111 serial driverMarek Vasut2012-10-26-135/+0
| | | | | | | | | | | | | | | | | | This driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: Remove support for NETARMMarek Vasut2012-10-26-207/+0
| | | | | | | | | | | | | | | | | | This stuff has been rotting in the tree for a while now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: Remove support for s3c4510Marek Vasut2012-10-26-343/+0
| | | | | | | | | | | | | | | | | | This stuff has been rotting in the tree for a year now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: Remove support for lpc2292Marek Vasut2012-10-26-120/+0
| | | | | | | | | | | | | | | | | | This stuff has been rotting in the tree for a year now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
* | | drivers/serial/serial_ns16550.c: sparse fixesKim Phillips2012-10-25-6/+6
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial_ns16550.c:222:1: warning: symbol 'eserial1_init' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_setbrg' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_getc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_tstc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_putc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_puts' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_init' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_setbrg' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_getc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_tstc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_putc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_puts' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_init' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_setbrg' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_getc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_tstc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_putc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_puts' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_init' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_setbrg' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_getc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_tstc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_putc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_puts' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-10-19-198/+0
|\ \ | |/ | | | | | | | | | | Conflicts: drivers/serial/serial_lh7a40x.c Signed-off-by: Tom Rini <trini@ti.com>
| * Remove lh7a40x cpu and serial driverAlbert ARIBAUD2012-10-16-205/+0
| | | | | | | | | | | | | | Since commit 957731ed (ARM: remove broken "lpd7a40x" boards), lh7a40x cpu and serial driver have become unused. Remove them. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | ColdFire: uart: fix build failure for missing header filesAlison Wang2012-10-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The following commit introduces some build failures for ColdFire platform. commit abaef69fbe683197607febeb2cc619490aca2a10 Author: Marek Vasut <marex@denx.de> Date: Thu Sep 13 16:51:38 2012 +0200 Add the missed header files. Sign-off-by: Alison Wang <b18965@freescale.com>
* | kerneldoc: Annotate drivers/serial/serial.cMarek Vasut2012-10-17-0/+165
| | | | | | | | | | | | | | | | Add kerneldoc annotations into serial core. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* | serial: Reorder get_current()Marek Vasut2012-10-17-9/+12
| | | | | | | | | | | | | | | | | | | | Reorder the get_current() function to make it a bit more readable. The code does not grow and there is minor change in the code logic, where dev != NULL is now checked in any case. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-12-02 10:19:18 +0000