summaryrefslogtreecommitdiff
path: root/drivers/serial
Commit message (Collapse)AuthorAgeLines
* serial: zynq: Add OF initialization supportMichal Simek2014-03-04-0/+28
| | | | | | | Add console selection from DTB which is enough to have OF driven solution. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* serial: arc: Convert to use default_serial_putsAxel Lin2014-02-21-7/+1
| | | | | | Use default_serial_puts() instead of duplicating the implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com>
* serial/serial_arc: switch from {read|write}l to {read|write}b accessorsAlexey Brodkin2014-02-21-9/+9
| | | | | | | | | | | | | This is required for proper functionality on big-endian targets. Memory-mapped registres of ARC UART are not 32-bit words but 8-bit bytes so on little-endian target either acessor (_l or _b) works fine. On big-endian only _b accessors works as expected. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tom Rini <trini@ti.com>
* serial/serial_arc: add work-around of ISS bugAlexey Brodkin2014-02-21-0/+16
| | | | | | | | | | Explanation is in in-lined comment. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tom Rini <trini@ti.com>
* serial_zynq: Migrate to Zynq clock frameworkSoren Brinkmann2014-02-19-11/+2
| | | | | | | | Remove hard coded frequencies and use Zynq's clock framework to obtain the UART clock frequency. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* zynq: serial: Simplify serial driver initializationMichal Simek2014-02-19-14/+20
| | | | | | | | | | Define both serial uarts in the driver and return default uart based on board configuration. - Move baseaddresses to hardware.h - Define default baudrate and clock values Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-19-133/+0
|\
| * ARM: serial: Remove the IXP UART driverMarek Vasut2014-02-06-133/+0
| | | | | | | | | | | | | | | | | | This driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-17-2/+2
|\ \
| * | serial: s5p: set automatically clears after resetting Rx FIFOInha Song2014-02-05-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix the u-boot shell problem on TRATS2 board. - If hold the key while booting is in progress, white spaces are written in u-boot shell. Set Automatically clears after resetting Rx FIFO. Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | serial: opencores_yanu: Avoid duplicate oc_serial_setbrg() implementationAxel Lin2014-02-11-40/+9
| | | | | | | | | | | | | | | | | | | | The implementation of oc_serial_setbrg() for CONFIG_SYS_NIOS_FIXEDBAUD and !CONFIG_SYS_NIOS_FIXEDBAUD are very similar. Add a baudrate variable and set it to either CONFIG_BAUDRATE or gd->baudrate. Then we can unify the code for both cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | serial: opencores_yanu: Fix build errorAxel Lin2014-02-11-1/+2
| | | | | | | | | | | | | | Fix build error due to missing include of serial.h and a trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | serial/serial_arc - add driver for ARC UARTAlexey Brodkin2014-02-07-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | Driver for non-standard on-chip UART, instantiated in the ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | usb: mv_udc: Rename to ci_udcMarek Vasut2014-02-06-2/+2
| | | | | | | | | | | | | | | | | | | | The mv_udc is not marvell-specific anymore. The mv_udc is used to drive generic ChipIdea CI13xxx series OTG cores, so rename the driver to ci_udc instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de>
* | serial: uartlite: Reset RX/TX in initMichal Simek2014-02-04-1/+13
|/ | | | | | Just to be sure that there is no pending data. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-01-10-3/+2
|\ | | | | | | | | | | | | | | | | | | Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be added to include/configs/exynos5-dt.h now. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * TI:omap3: Drop omap3_zoom2Tom Rini2014-01-07-3/+2
| | | | | | | | | | | | | | The omap3_zoom2 board has not been updated for a correct CONFIG_SYS_HZ and Tom Rix's email has long been bouncing. Signed-off-by: Tom Rini <trini@ti.com>
* | serial_sh: add support for SH7753Yoshihiro Shimoda2013-12-18-1/+3
| | | | | | | | | | Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | serial: lpc32xx: send CR before LFVladimir Zapolskiy2013-12-13-0/+3
|/ | | | | | | | | | For LPC32XX high-speed UART it is required to send a carriage return symbol along with line feed. The problem was introduced in e503f90a commit. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* serial: zynq: Remove unused #definesSoren Brinkmann2013-12-02-4/+0
| | | | | | Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: trini, uboot
* serial: s5p: Staticize local functionsAxel Lin2013-11-08-12/+12
| | | | | | | Staticize local functions in s5p serial driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* serial: xuartlite: Staticize local functionsAxel Lin2013-11-08-10/+10
| | | | | | | | Staticize local functions in xuartlite driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stefan Roese <sr@denx.de> Tested-by: Michal Simek <monstr@monstr.eu>
* serial: mxs_auart: Staticize local functionsAxel Lin2013-11-08-5/+5
| | | | | | | Staticize local functions in mxs_auart driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-52/+30
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2013-10-22-1/+17
|\
| * serial: sh: Add support R8A7791Nobuhiro Iwamatsu2013-10-17-4/+4
| | | | | | | | | | | | This adds the preset value to register for R8A7791. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * serial: sh: Add support R8A7790Nobuhiro Iwamatsu2013-10-17-0/+14
| | | | | | | | | | | | | | This adds the preset value to register, and setup of baudrate. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * serial: sh: Change definition of clock of SCIFNobuhiro Iwamatsu2013-10-17-1/+3
| | | | | | | | | | | | | | | | | | | | | | The former SH/SCIF driver had calculated baudrate based on CONFIG_SYS_CLK_FREQ. The newest SH/SCIF needs calculation of the clock for SCIF. This patch defines clock CONFIG_SH_SCIF_CLK_FREQ for SCIF and changes it to CONFIG_SH_SCIF_CLK_FREQ from CONFIG_SYS_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
* | usb: udc: add udc.h include fileTroy Kisky2013-10-20-2/+1
|/ | | | | | | Move common definitions to udc.h This allows musb_udc.h to be removed as well. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* drivers: serial_s3c44b0: delete an unused driverMasahiro Yamada2013-09-19-219/+0
| | | | | | | | | Since commit 5dc5f36 removed B2 board support, there are no boards enabling serial_s3c44b0. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-05-0/+154
|\ | | | | | | | | | | | | | | Conflicts: drivers/serial/serial.c The conflict above was a trivial case of adding one init function in each branch, and manually resolved in merge.
| * ARM: mxs: Added application UART driverAndreas Wass2013-08-21-0/+154
| | | | | | | | | | | | | | | | | | | | The driver makes it possible to use an application UART as the U-Boot output console for Freescale i.MX23/i.MX28 devices. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* | serial: arm_dcc: Convert to use default_serial_putsAxel Lin2013-08-19-7/+1
| | | | | | | | | | | | | | | | Use default_serial_puts() instead of its own implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Michal Simek <monstr@monstr.eu>
* | Merge branch 'master' of git://88.191.163.10/u-boot-armTom Rini2013-08-18-2/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini <trini@ti.com>
| * | Prepare for TI816X : reuse existing code from TI814XTENART Antoine2013-08-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: AM43xx: Add build supportLokesh Vutla2013-08-15-2/+3
| |/ | | | | | | | | | | Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | serial: arm_dcc: Register with serial coreJagannadha Sutradharudu Teki2013-08-13-6/+29
| | | | | | | | | | | | | | Register arm_dcc with drivers/serial/serial.c Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | serial: arm_dcc: Remove stdio structure supportJagannadha Sutradharudu Teki2013-08-13-16/+0
| | | | | | | | | | | | | | | | | | Removed stdio structure ops support on arm_dcc driver, and need to register with serial core so-that it can access like remianing serial drivers. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | usb: mv_udc: Unbreak the mv_udc driverMarek Vasut2013-07-29-0/+2
|/ | | | | | | | | | | | The mv_udc driver is broken for a while and doesn't even compile. This patch fixes the issues and gets the driver into working state again. This driver was tested on Freescale i.MX233/i.MX28 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-448/+34
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-12-0/+78
|\ | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
| * S5P: Serial: Add fdt support to driverRajeshwari Shinde2013-06-24-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds FDT support to the serial s5p driver. At present disabling the serial console (from the device tree) crashes U-Boot. Add checks for this case, so that execution can continue without a serial console. It also enables the serial_s5p driver recognize the silent_console option. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | serial: Use ARRAY_SIZE instead of reinventing itAxel Lin2013-06-26-3/+2
|/ | | | Signed-off-by: Axel Lin <axel.lin@ingics.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-19-4/+9
|\ | | | | | | | | Conflicts: spl/Makefile
| * Exynos: uart: s5p: enabling the uart tx/rx fifoAkshay Saraswat2013-05-21-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | This patch enables the uart tx/rx fifo. Now that fifo is enabled, the uart read/write functions are modfied to check the UFSTAT register for fifo status instead of UTRSTAT (as required with fifo's enabled). Tested by booting linux kernel. Before enabling tx/rx fifo "Uncompressing linux" message is garbled and after enabling it is proper. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm: Remove OMAP2420H4 and all omap24xx supportTom Rini2013-06-10-10/+0
| | | | | | | | | | | | | | | | | | The omap2420H4 was the only mainline omap24xx board. Prior to being fixed by Jon Hunter in time for v2013.04 it had been functionally broken for a very long time. Remove this board as there's not been interest in it in U-Boot for quite a long time. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-08-0/+133
|\ \ | | | | | | | | | | | | Conflicts: drivers/serial/Makefile
| * | arm: vf610: Add uart support for Vybrid VF610Alison Wang2013-06-03-0/+133
| |/ | | | | | | | | | | | | This patch adds lpuart support for Vybrid VF610 platform. Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Alison Wang <b18965@freescale.com>
* | Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-15-2/+0
| | | | | | | | | | | | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
* | blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang2013-05-13-0/+412
|/ | | | | | | | - Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>