summaryrefslogtreecommitdiff
path: root/drivers/serial
Commit message (Collapse)AuthorAgeLines
* serial: add LPC32X0 high-speed UART devices supportVladimir Zapolskiy2012-05-15-0/+113
| | | | | | | | | This change adds an implementation of high-speed UART found on NXP LPC32X0 SoCs. Such UARTs are enumerated as UART1, UART2 and UART7. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com>
* Enable high speed support for USB device framework and usbttyVipin KUMAR2012-03-28-1/+53
| | | | | | | | | | | | | This patch adds the support for high speed in usb device framework and usbtty driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board configuration files have to define this macro to enable high speed support. Along with that specific peripheral drivers also need to define a function to let the framework know that the enumeration has happened at high speed. This function prototype is "int is_usbd_high_speed(void)" Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* USB:gadget:designware USB device controller (UDC) implementationVipin KUMAR2012-03-19-2/+2
| | | | | | | | | | The earlier usb device controller driver was specific to spear platforms. This patch implements the usb device controller driver as a generic controller which can be reused by other platforms using this peripheral. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> Acked-by: Marek Vasut <marex@denx.de>
* sh: Fix sh7264 clock speed and related serial settingPhil Edworthy2012-03-08-2/+0
| | | | | | | | The generalised calculation of the serial bit rate reg also applies to sh7264, it was just the clock speed that was set incorrectly. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* USB: Use (get|put)_unaligned for accessing wMaxPacketSizeTom Rini2011-12-16-4/+6
| | | | | | | | | | | | | | | | | | | | | | In 9792987721c7980453fe6447c3fa6593b44f8458 Stefan describes a usecase where the previous behavior of leaving wMaxPacketSize be unaligned caused fatal problems. The initial fix for this problem was incomplete however as it showed another cases of non-aligned access that previously worked implicitly. This switches to making sure that all access of wMaxPacketSize are done via (get|put)_unaligned. In order to maintain a level of readability to the code in some cases we now use a variable for the value of wMaxPacketSize and in others, a macro. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Remy Bohmer <linux@bohmer.net> OpenRISC: Tested-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Beagleboard xM, Pandaboard run-tested, s5p_goni build-tested. Signed-off-by: Tom Rini <trini@ti.com>
* usbtty: init endpoints prior to startup eventsStefan Herbrechtsmeier2011-12-11-2/+2
| | | | | | | | On some usb device controllers (pxa) the endpoint configuration must be programmed prior to enable it. Signed-off-by: Stefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
* tegra2: Remove unused low-level Tegra2 UART codeSimon Glass2011-12-09-107/+0
| | | | | | | | | This was used by the AVP in early boot but is no longer used. Unless we plan to enable it somehow it is not needed. In any case we should try to use the ns16550 driver instead as it has the same code. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* MX: serial_mxc: cleanup removing nasty #ifdefStefano Babic2011-12-06-33/+4
| | | | | | | | | | | | | | | | | | The serial driver for iMX SOCs is continuosly changed if a new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port> defines were used only to find the base address for the selected UART. Instead of that, move the base address to the board configuration file and drop all #ifdef from driver. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Wolfgang Denk <wd@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Helmut Raiger <helmut.raiger@hale.at> CC: John Rigby <jcrigby@gmail.com> CC: Matthias Weisser <weisserm@arcor.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Jason Liu <jason.hui@linaro.org>
* PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]XMarek Vasut2011-12-06-3/+3
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Cleanup serial_pxaMarek Vasut2011-11-15-276/+188
| | | | | | | | | | * Cleanup register definitions by introducing new regs-uart.h, compliant with rest of U-Boot. * Remove old register definitions from pxa-regs.h * Convert serial_pxa to new regs-uart.h * Cleanup serial_pxa Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* sandbox: put stdin into raw modeMike Frysinger2011-11-03-0/+1
| | | | | | | | This allows us to act like a serial device: we get tab chars and CTRL+C and respond appropriately. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Simon Glass <sjg@chromium.org>
* serial: sandbox: use ssize_t to match os_readMike Frysinger2011-11-03-1/+1
| | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
* serial: sandbox: optimize putsMike Frysinger2011-11-03-2/+1
| | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
* ARM:AM33XX: Add support for TI AM335X EVMChandan Nath2011-10-27-2/+5
| | | | | | | | | This patch adds basic support for booting the board. This patch adds support for the UART necessary to get to the u-boot prompt. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* serial: reduce include platform file for marvell chipLei Wen2011-10-27-9/+0
| | | | | | | | | | | | | | | | Build pass with following config: dkb_config aspenite_config edminiv2_config openrd_ultimate_config sheevaplug_config mv88f6281gtw_ge_config rd6281a_config guruplug_config km_kirkwood_config Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Wolfgang Denk <wd@denx.de>
* NS16550: trivial code clean for checkpatchSimon Glass2011-10-23-17/+20
| | | | | | | This removes most checkpatch warnings from the ns16550 driver and its header. Signed-off-by: Simon Glass <sjg@chromium.org>
* serial: uartlite: Fix compilation warningsMichal Simek2011-10-23-1/+1
| | | | | | | | | | | | | | | | Do not setup userial_ports array as const because in uartlite_serial_putc is out_be32 which can't write to tx_fifo if is const. Warning log: serial_xuartlite.c: In function 'uartlite_serial_putc': serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_getc': serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_tstc': serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type Signed-off-by: Michal Simek <monstr@monstr.eu>
* serial: pl01x: drain PL01x FIFO before baudrate changeLinus Walleij2011-10-22-0/+10
| | | | | | | | | Not draining the FIFO and waiting for the UART to be non-busy before changing baudrate results in crap characters on the console, so let's wait for the FIFO to drain and the last character to be clocked out before we do that. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Move timestamp and version files into 'generated' subdirSimon Glass2011-10-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a rather subtle build problem where the build time stamp is not updated for out-of-tree builds if there exists an in-tree build which has a valid timestamp file. So if you do an in-tree build, then an out-of-tree build your timestamp will not change. The correct timestamp_autogenerated.h lives in the object tree, but it is not always found there. The source still lives in the source tree and when compiling version.h, it includes timestamp_autogenerated.h. Since the current directory is always searched first, this will come from the source tree rather than the object tree if it exists there. This affects dependency generation also, which means that common/cmd_version.o will not even be rebuilt if you have ever done an in-tree build. A similar problem exists with the version file. This change moves both files into the 'generated' subdir, which is already used for asm-offsets.h. Then timestamp.h and version.h are updated to include the files from there. There are other places where these generated files are included, but I cannot see why these don't just use the timestamp.h and version.h headers. So this change also tidies that up. I have tested this with in- and out-of-tree builds, but not SPL. I have looked at various other options for fixing this, including sed on the dep files, -I- and -include flags to gcc, but I don't think they can be made to work. Comments welcome. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* sandbox: Add serial uartSimon Glass2011-10-17-0/+64
| | | | | | | | This uart simply writes to stdout and reads from stdin. We might imagine instead buffering the data so that a test interface can check output and inject input. Signed-off-by: Simon Glass <sjg@chromium.org>
* serial: uartlite: Support for SERIAL_MULTIMichal Simek2011-10-09-19/+121
| | | | | | Add support for SERIAL MULTI for uartlite. Signed-off-by: Michal Simek <monstr@monstr.eu>
* ns16550: change to allow 32 bit access to registersDave Aldridge2011-10-01-0/+6
| | | | | | | | | | If CONFIG_SYS_NS16550_MEM32 is defined then 32 bit memory mapped access will be used to read/write the uart registers. This is especially useful for SoC devices that implement 16550 compatible uarts but that have peripheral access width constraints. Signed-off-by: Dave Aldridge <fovsoft@gmail.com>
* sh: Add Renesas rsk7264 boardPhil Edworthy2011-08-22-1/+4
| | | | | | | | | | The rsk7264 (also know as rsk2+sh7264) is an SH2A based board with 64MB NAND flash and 64MB SDRAM. It is very similar to the rsk7203 board. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: drop useless ctlr fieldMike Frysinger2011-07-26-20/+14
| | | | | | | | | | | | | | | | | | | The multi serial support has a "ctlr" field which almost no one uses, but everyone is forced to set to useless strings. So punt it. Funny enough, the only code that actually reads this field (the mpc8xx driver) has a typo where it meant to look for the SCC driver. Fix it while converting the check to use the name field. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Heiko Schocher <hs@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Tom Rix <Tom.Rix@windriver.com> CC: Minkyu Kang <mk7.kang@samsung.com> CC: Craig Nauman <cnauman@diagraph.com> CC: Marek Vasut <marek.vasut@gmail.com> CC: Prafulla Wadaskar <prafulla@marvell.com> CC: Mahavir Jain <mjain@marvell.com>
* serial: push default_serial_console to driversMike Frysinger2011-07-26-0/+47
| | | | | | | | | | | | | | | | | Rather than sticking arch/board/driver specific logic in the common serial code, push it all out to the respective drivers. The serial drivers declare these funcs weak so that boards can still override things with their own definition. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Heiko Schocher <hs@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Tom Rix <Tom.Rix@windriver.com> CC: Minkyu Kang <mk7.kang@samsung.com> CC: Craig Nauman <cnauman@diagraph.com> CC: Prafulla Wadaskar <prafulla@marvell.com> CC: Mahavir Jain <mjain@marvell.com> Tested-by: Minkyu Kang <mk7.kang@samsung.com>
* scaled down version of generic libraries for SPLAneesh V2011-07-26-0/+3
| | | | Signed-off-by: Aneesh V <aneesh@ti.com>
* driver/serial: delete at91rm9200_usartAndreas Bießmann2011-07-04-127/+0
| | | | | | The at91rm9200_usart driver could be fully replaced by atmel_usart driver. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-06-23-2/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: run arm_pci_init after relocation IXP42x PCI rewrite update/fix PDNB3 board update/fix IXDP425 / IXDPG425 boards add dvlhost (dLAN 200 AV Wireless G) board IXP NPE: add support for fixed-speed MII ports update/fix AcTux4 board update/fix AcTux3 board update/fix AcTux2 board update/fix AcTux1 board use -ffunction-sections / --gc-sections on IXP42x support CONFIG_SYS_LDSCRIPT on ARM fix "depend" target in npe directory Fix IXP code to work after relocation was added trigger hardware watchdog in IXP42x serial driver add support for IXP42x Rev. B1 and newer add XScale sub architecture (IXP/PXA) to maintainer list Conflicts: arch/arm/lib/board.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * trigger hardware watchdog in IXP42x serial driverMichael Schwingen2011-06-23-2/+5
| | | | | | | | Signed-off-by: Michael Schwingen <michael@schwingen.org>
* | ARM: drop unsupported 'trab' boardWolfgang Denk2011-06-22-6/+0
|/ | | | | | | | | | The 'trab' board configuration is broken, and there is nobody who is interested and willing to fix it. Drop it. This includes support for VFD displays which have always been used by this board only. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ATMEL: fix related common atmel driver filesReinhard Meyer2011-05-18-21/+7
| | | | Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* Serial: p1011: new vendor init optionsJohn Rigby2011-05-12-3/+31
| | | | | | | | | | | | | | | | | | | | Two new options: CONFIG_PL011_SERIAL_RLCR Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) have separate receive and transmit line control registers. Set this variable to initialize the extra register. CONFIG_PL011_SERIAL_FLUSH_ON_INIT On some platforms (e.g. U8500) U-Boot is loaded by a second stage boot loader that has already initialized the UART. Define this variable to flush the UART at init time. empty fifo on init Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
* IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic2011-04-27-4/+0
| | | | | | | | | | As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
* serial: add pantheon soc supportLei Wen2011-02-21-0/+2
| | | | Signed-off-by: Lei Wen <leiwen@marvell.com>
* serial: Add Tegra2 serial port supportTom Warren2011-02-21-0/+107
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* S5P: serial: Use the inline function instead of static valueMinkyu Kang2011-02-02-1/+1
| | | | Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* serial_mxc: add support for Freescale's i.MX35 processorStefano Babic2011-02-02-9/+6
| | | | | | The patch adds UART support for the i.MX35 processor. Signed-off-by: Stefano Babic <sbabic@denx.de>
* serial_mxc: add support for MX53 processorLiu Hui-R643432011-02-02-0/+6
| | | | | | This patch add UART support for Freescale MX53 processor Signed-off-by: Jason Liu <r64343@freescale.com>
* sh: serial_sh: Fix build in serial_shNobuhiro Iwamatsu2011-01-11-3/+3
| | | | | | | | | The serial of ap325rxa has it of two kinds, and the setting of the clock is different. Because there was a problem by function to judge serial kind, this revised it. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* sh: sh7722: Fix multiple definition of PSDR in serial_shNobuhiro Iwamatsu2011-01-11-0/+1
| | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* sh: serial: Update serial driver for SHNobuhiro Iwamatsu2011-01-11-127/+762
| | | | | | | | I copied the setting of CPU from Linux kernel and commonized it. By this, we can communalize a kernel and information. And added the serial setting of many CPU's. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'next' of ../nextWolfgang Denk2010-12-22-43/+61
|\
| * Serial: Add UART support for Marvell ARMADA 100 SoCs.Prafulla Wadaskar2010-12-16-2/+3
| | | | | | | | | | | | | | | | ARMADA 100 SoCs has NS16550 compatible UART peripheral This patch enables the same for ARMADA100 platforms Signed-off-by: Mahavir Jain <mjain@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * Serial: ns16550: Add support for CONFIG_SYS_NS16550_IER macroPrafulla Wadaskar2010-12-16-2/+6
| | | | | | | | | | | | | | | | | | | | On some processors this ier register configuration is different for ex. Marvell Armada100 This patch introduce CONFIG_SYS_NS16550_IER macro support to unconditionally initialize this register. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * pl01x: use C structs and readl/writelRabin Vincent2010-11-30-39/+52
| | | | | | | | | | | | | | | | Use C structs for registers, and use readl/writel instead of custom accessors. Acked-by: Michael Brandt <michael.brandt@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
* | Move DECLARE_GLOBAL_DATA_PTR to file scopeJohn Rigby2010-12-21-4/+6
|/ | | | | | | | | | | | | | | It can be optimised out by the compiler otherwise resulting in obscure errors like a board not booting. This has been documented in README since 2006 when these were first fixed up for GCC 4.x. Signed-off-by: John Rigby <john.rigby@linaro.org> Fix some additional places. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-By: Albert ARIBAUD <albert.aribaud@free.fr>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk2010-10-29-14/+18
|\
| * Add generic support for samsung s3c2440C Nauman2010-10-28-13/+13
| | | | | | | | | | | | | | | | | | | | | | This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman <cnauman@diagraph.com> Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARMV7: S5P: serial: support the s5pc210Minkyu Kang2010-10-19-1/+5
| | | | | | | | | | | | | | | | | | This patch is for s5pc210 support. Due to the resigter of baudrate is changed from slot to value, add both of them to uart structure. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>