summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
Commit message (Collapse)AuthorAgeLines
* rockchip: rk3288: Fix pinctrl for GPIO bank 0John Keeping2016-07-31-2/+19
| | | | | | | | | | | | | | | | Bank 0 is the "PMU GPIO" bank which is controlled by the PMU registers rather than the GRF registers. In the GRF the top half of the register is used as a mask so that some bits can be updated without affecting the others, but in the PMU this feature is not provided and the top half of the register is reserved. Take the same approach as the Linux driver to update the value via read-modify-write but setting the mask for only the bits that have changed. The PMU registers ignore the top 16 bits so this works for both GRF and PMU iomux registers. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass2016-07-27-24/+5
| | | | | | | Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass2016-07-27-7/+3
| | | | | | | This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
* cosmetic: rockchip: sort socs according to numbersHeiko Stübner2016-07-25-9/+9
| | | | | | | | | | Having some sort of ordering proofed helpful in a lot of other places already. So for a larger number of rockchip socs it might be helpful as well instead of an ever increasing unsorted list. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Simon Glass <sjg@chromium.org>
* cosmetic: rockchip: rk3036: pinctrl: fix config symbol namingHeiko Stübner2016-07-25-2/+2
| | | | | | | | | Rockchip socs are always named rkxxxx in all places, as also shown by the naming of the rk3036 pinctrl file itself. Therefore also name the config symbol according to this scheme. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org>
* cosmetic: rockchip: rk3288: pinctrl: fix config symbol namingHeiko Stübner2016-07-25-4/+4
| | | | | | | | The rk3288 pinctrl is very specific to this soc, so should not hog the generic rockchip naming. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()Masahiro Yamada2016-07-24-30/+17
| | | | | | | | This does not have much impact on behavior, but makes code look more more like Linux. The use of devm_ioremap() often helps to delete .remove callbacks entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* rockchip: pinctrl: Update the rk3288 driver to support of-platdataSimon Glass2016-07-14-1/+7
| | | | | | | | Add support for of-platdata with rk3288. This requires disabling access to the device tree and renaming the driver to match the string that of-platdata will search for. Signed-off-by: Simon Glass <sjg@chromium.org>
* pinctrl: uniphier: add Ethernet pin-mux settingsMasahiro Yamada2016-07-02-0/+94
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: avoid building unneeded pin-mux tables for SPLMasahiro Yamada2016-07-02-171/+192
| | | | | | | SPL does not use all of the devices, so we can save some memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: support pin configuration for dedicated pinsMasahiro Yamada2016-07-02-154/+149
| | | | | | | | | | | | | | PH1-LD4 and PH1-sLD8 SoCs have pins that support pin configuration (pin biasing, drive strength control), but not pin-muxing. Allow to fill the mux value table with -1 for those pins; pins with mux value -1 will be skipped in the pin-mux set function. The mux value type should be changed from "unsigned" to "int" in order to accommodate -1 as a special case. [ Linux commit: 363c90e743b50a432a91a211dd8b078d9df446e9 ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: split pinctrl driver for PH1-LD11 and PH1-LD20Masahiro Yamada2016-07-02-8/+118
| | | | | | | | | | | PH1-LD11 and PH1-LD20 have much pin controlling in common, so I added a single driver shared between them in the initial commit. However, the Ethernet pin-mux settings I am going to add are different with each other, and they may diverge more as the progress of development. Split it into two dedicated drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: allow to have pinctrl node under syscon nodeMasahiro Yamada2016-07-02-12/+12
| | | | | | | | | | | Currently, the UniPhier pinctrl driver itself is a syscon, but it turned out much more reasonable to make it a child node of a syscon because our syscon node consists of a bunch of system configuration registers, not only pinctrl, but also phy, and misc registers. It is difficult to split the node. This commit allows to migrate to the new DT structure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: remove unneeded pin group nand_cs1Masahiro Yamada2016-06-30-3/+0
| | | | | | | This SoC does not support NAND CS1. This place-holder is no longer necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: fix NAND pin-mux setting for PH1-LD11/LD20Masahiro Yamada2016-06-30-2/+2
| | | | | | My mistake in the initial support patch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: remove wrong pin-mux functions for ProXstream2Masahiro Yamada2016-06-30-2/+0
| | | | | | These are pin group names, not function names. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-0/+360
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| * pinctrl: Add pinctrl driver support for Exynos7420 SoCThomas Abraham2016-05-25-0/+359
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinctrl driver support for Samsung's Exynos7420 SoC. The changes have been split into Exynos7420 specific and common Exynos specific portions so that this implementation is reusable on other Exynos SoCs as well. The Exynos pinctrl driver supports only device tree based pin configuration. The bindings used are similar to the ones used in the linux kernel. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devicesThomas Abraham2016-05-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | It is possible to have multiple pin controllers in the system. Use the DM_UC_FLAG_SEQ_ALIAS flag so that the pinctrl instances are assigned a sequence number. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | rockchip: rk3288: pinctrl: support more pinsSjoerd Simons2016-05-27-1/+1
|/ | | | | | | | | The rgmii_pins node in rk3288.dtsi configures 15 pins. Increase the size of the cell array to accomedate that, otherwise only the first 10 get configured. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
* drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros qca953x.Wills Wang2016-05-21-0/+166
| | | | | | | | | This is a simple pinctrl driver, it just support uart and spi pin-mux now. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org> [fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x.Wills Wang2016-05-21-0/+151
| | | | | | | | | This is a simple pinctrl driver, it just support uart and spi pin-mux now. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org> [fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20Masahiro Yamada2016-04-24-4/+4
| | | | | | | I found many mistakes in the initial version. Fixes: 8a3328c209d0 ("pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: rename function/array namesMasahiro Yamada2016-04-24-102/+102
| | | | | | Make function/array names match the file names for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: support UniPhier PH1-LD11 pinctrl driverMasahiro Yamada2016-04-01-6/+7
| | | | | | | | The pinmux of PH1-LD11 is almost a subset of that of PH1-LD20 (as far as used in boot-loader), so this commit makes the driver shared between the two SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driverMasahiro Yamada2016-04-01-0/+120
| | | | | | Add pin configuration and pinmux support for UniPhier PH1-LD20 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: support per-pin input enable for new SoCsMasahiro Yamada2016-04-01-1/+28
| | | | | | | | Upcoming new pinctrl drivers for PH1-LD11 and PH-LD20 support input signal gating for each pin. (While, existing ones only support it per pin-group.) This commit prepares the core part for that. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: introduce capability flagMasahiro Yamada2016-04-01-27/+29
| | | | | | | | | | | | | | | | | | | | | The core part of the UniPhier pinctrl driver needs to support a new capability for upcoming UniPhier ARMv8 SoCs. This sometimes happens because pinctrl drivers include really SoC-specific stuff. This commit intends to tidy up SoC-specific parameters of the existing drivers before adding new ones. Having flags would be better than adding new members every time a new SoC-specific capability comes up. At this time, there is one flag, UNIPHIER_PINCTRL_CAPS_DBGMUX_SEPARATE. This capability (I'd say rather quirk) was added for PH1-Pro4 and PH1-Pro5 as requirement from our customer. For those SoCs, one pin-mux setting is controlled by the combination of two separate registers; the LSB bits at register offset (8 * N) and the MSB bits at (8 * N + 4). Because it is impossible to update two separate registers atomically, the LOAD_PINCTRL register should be set in order to make the pin-mux settings really effective. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: use devm_get_addr() to get base addressMasahiro Yamada2016-04-01-6/+3
| | | | | | | | | Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: drop PH1- prefix from CONFIG options and file namesMasahiro Yamada2016-03-24-19/+19
| | | | | | | | The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIERMasahiro Yamada2016-03-09-9/+9
| | | | | | | | | | CONFIG_PINCTRL_UNIPHIER is more suitable than CONFIG_ARCH_UNIPHIER to guard the drivers/pinctrl/uniphier directory. The current CONFIG_PINCTRL_UNIPHIER_CORE is a bit long, so rename it into CONFIG_PINCTRL_UNIPHIER. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: set input-enable before pin-muxingMasahiro Yamada2016-03-09-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | While IECTRL is disabled, input signals are pulled-down internally. If pin-muxing is set up first, glitch signals (Low to High transition) might be input to hardware blocks. Bad case scenario: [1] The hardware block is already running before pinctrl is handled. (the reset is de-asserted by default or by a firmware, for example) [2] The pin-muxing is set up. The input signals to hardware block are pulled-down by the chip-internal biasing. [3] The pins are input-enabled. The signals from the board reach the hardware block. Actually, one invalid character is input to the UART blocks for such SoCs as PH1-LD4, PH1-sLD8, where UART devices start to run at the power on reset. To avoid such problems, pins should be input-enabled before muxing. [ ported from Linux commit bac7f4c1bf5e7c6ccd5bb71edc015b26c77f7460 ] Fixes: 5dc626f83619 ("pinctrl: uniphier: add UniPhier pinctrl core support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: imx: Support i.MX7DPeng Fan2016-02-21-0/+56
| | | | | | | | | | | Introudce i.MX7 pinctrl driver support. For now only i.MX7D supported. There are two iomux controllers in i.MX7D, iomuxc and iomuxc_lpsr. To iomuxc_lpsr, ZERO_OFFSET_VALID is set, means offset of mux_reg and conf_reg can begin at 0. Signed-off-by: Peng Fan <van.freenix@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* pinctrl: imx: Introduce pinctrl driver for i.MX6Peng Fan2016-02-21-0/+352
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce pinctrl for i.MX6 1. pinctrl-imx.c is for common usage. It's used by i.MX6/7. 2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry. 3. To the pinctrl_ops implementation, only set_state is implemented. To i.MX6/7, the pinctrl dts entry is as following: &iomuxc { pinctrl-names = "default"; pinctrl_csi1: csi1grp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 >; }; [.....] }; there is no property named function or groups. So pinctrl_generic_set_state can not be used here. 5. This driver is a simple implementation for i.mx iomux controller, only parse the fsl,pins property and write value to registers. 6. With DEBUG enabled, we can see log when "i2c bus 0": " set_state_simple op missing imx_pinctrl_set_state: i2c1grp mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x14c val 0x10 select_input: offset 0x5d8 val 0x1 write config: offset 0x3bc val 0x7f mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x148 val 0x10 select_input: offset 0x5d4 val 0x1 write config: offset 0x3b8 val 0x7f " this means imx6 pinctrl driver works as expected. Signed-off-by: Peng Fan <van.freenix@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* drivers: pinctrl: Add pinctrl driver for Microchip PIC32.Purna Chandra Mandal2016-02-01-0/+374
| | | | | | | | | | | | | | In PIC32 pin-controller is a combined gpio-controller, pin-mux and pin-config module. Remappable peripherals are assigned pins through per-pin based muxing logic. And pin configuration are performed on specific port registers which are shared along with gpio controller. Note, non-remappable peripherals have default pins assigned thus require no muxing. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada2016-01-25-3/+1
| | | | | | | | | | | | | | | | BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* rockchip: rk3288: pinctrl: Fix HDMI pinctrlSimon Glass2016-01-21-0/+2
| | | | | | | Since the device tree does not specify the EDID pinctrl option for HDMI we must set it manually. Fix the driver to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: pinctrl: Implement the get_gpio_mux() methodSimon Glass2016-01-21-16/+52
| | | | | | | Implement this so that the GPIO command will be able to report whether a GPIO is used for input or output. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: pinctrl: Reduce the size for SPLSimon Glass2016-01-21-3/+17
| | | | | | | This file has many features that are not needed by SPL. Use #ifdef to remove the unused features and reduce the code size. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: pinctrl: Add a way for a GPIO driver to obtain a pin functionSimon Glass2016-01-21-0/+10
| | | | | | | | | | | | | GPIO drivers want to be able to show if a pin is enabled for input, output, or is being used by another function. Some drivers can easily find this and the code is included in the driver. For some SoCs this is more complex. Conceptually this should be handled by pinctrl rather than GPIO. Most pinctrl drivers will have this feature anyway. Add a method by which a GPIO driver can obtain the pin mux value given a GPIO reference. This avoids repeating the code in two places. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: pinctrl: Add a full pinctrl driverSimon Glass2016-01-21-1/+229
| | | | | | | We can make use of the device tree to configure pinctrl settings. Add this support for the driver so we can use it in U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Convert the PMU IOMUX registers into an arraySimon Glass2016-01-21-2/+2
| | | | | | | | | This is easier to deal with when using generic code since it allows us to use a register index instead of naming each register. Adjust it, adding an enum to improve readability. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: pinctrl: Add a function to parse PIN_CONFIG flagsSimon Glass2016-01-21-0/+12
| | | | | | | | Add a function which produces a flags word from a few common PIN_CONFIG settings. This is useful for simple pinctrl drivers that don't need to worry about drive strength, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rk3036: Bind GPIO banksJeffy Chen2016-01-21-0/+8
| | | | | | | | Call dm_scan_fdt_node() in rk3036 pinctrl uclass binding. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* pinctrl: Avoid binding all pinconfig nodes before relocationSimon Glass2016-01-20-0/+4
| | | | | | | | This can create a large number of pinctrl devices. It chews up early malloc() memory and takes time. Only bind those which are marked as needed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rk3036: Add pinctrl driverhuang lin2015-12-01-0/+286
| | | | | | | Add a driver which support pin multiplexing setup for rk3036 Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-0/+8
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*Masahiro Yamada2015-09-25-6/+6
| | | | | | | I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify they belong to UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: add UniPhier PH1-LD6b pinctrl driverMasahiro Yamada2015-09-25-0/+140
| | | | | | Add pin configuration and pinmux support for UniPhier PH1-LD6b SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: add UniPhier ProXstream2 pinctrl driverMasahiro Yamada2015-09-25-0/+147
| | | | | | | Add pin configuration and pinmux support for UniPhier ProXstream2 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>