summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
...
* armv8/fsl-lsch3: Add Freescale Debug Server driverBhupesh Sharma2015-04-21-0/+4
| | | | | | | | | | | | | The Debug Server driver is responsible for loading the Debug server FW on the Service Processor (Cortex-A5 core) on LS2085A like SoCs and then polling for the successful initialization of the same. TOP MEM HIDE is adjusted to ensure the space required by Debug Server FW is accounted for. MC uses the DDR area which is calculated as: MC DDR region start = Top of DDR - area reserved by Debug Server FW Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net: pch_gbe: Fix pch_gbe device nameBin Meng2015-04-20-1/+1
| | | | | | | The name "pch_gbe.%x" exceeds the limit of the name in the 'struct eth_device'. Rename it as just "pch_gbe". Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* net: gem: Use correct type for castingMichal Simek2015-04-20-1/+2
| | | | | | | Use phys_addr_t which is used in function prototype in system.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net/phy: fixup for get_phy_idShengzhou Liu2015-04-20-1/+1
| | | | | | | | commit 3c6928fd7b0f84 "net: phy: fix warnings with W=1" caused some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the warning and make those special PHYs working as well. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* net: phy: micrel: add support for KSZ8081MNXLuca Ellero2015-04-20-0/+11
| | | | | | | This patch adds a support for KSZ8081MNX in MII mode. Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com> Acked-by: Pavel Machek <pavel@denx.de>
* net: rtl8169: Build warning fixes for 64-bitThierry Reding2015-04-20-11/+13
| | | | | | | | | | | Turn ioaddr into an unsigned long rather than a sized 32-bit variable. While at it, fix a couple of pointer to integer cast size mismatch warnings by casting through unsigned long going from pointers to integers and vice versa. Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: realtek: Disable interrupt on Realtek Ethernet PHY driversCodrin Ciubotariu2015-04-20-1/+17
| | | | | | | | | | | | | | | Some Realtek Ethernet PHYs, like RTL8211D(G/N) and RTL8211E(G), have interrupts enabled by default. If the interrupt is not treated later by the OS and the PHY's interrupt line is enabled and shared with other interrupts, the system will get an interrupt storm. This patch disables the interrupt for PHY devices that use one of the current Realtek Ethernet PHY drivers. Some of Realtek Ethernet PHYs, such as RTL8211B(L) have the interrupt masked. In this case, the functionality of the PHY should not be afected since this patch brings INER and INSR registers to their default values. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: net: Adjust designware driver to support driver modelSimon Glass2015-04-18-17/+153
| | | | | | | | Add driver model support to the designware driver. This reuses most of the existing code except for some duplication in the probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: net: Tidy up designware driver ready for driver modelSimon Glass2015-04-18-34/+53
| | | | | | | | | | | | | | Adjust the error handling to use errno.h instead of returning -1. Change leaf functions to pass in the arguments they require rather than struct eth_device. Apart from simplifying the code it makes is easier to reuse these functions for driver model, since mostly they actually only use struct dw_eth_priv (which we can keep). Create a stub for each Ethernet operation function. This will allow use to share code with the driver model versions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dm: net: Adjust PHY interface to work with CONFIG_DM_ETHSimon Glass2015-04-18-0/+22
| | | | | | | | | | | | When driver model is used for Ethernet a few functions are passed a udevice instead of an eth_device. Also add a function to find a PHY type given its name. This will be used to decode the device tree node. Finally, put a phy_interface field in struct eth_pdata since this is an important part of the platform data for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Kconfig: Move CONFIG_DESIGNWARE_ETH to KconfigSimon Glass2015-04-18-1/+8
| | | | | | | | | | Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Version 1: Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Fix checkpatch.pl failures in net.cJoe Hershberger2015-04-18-6/+6
| | | | | | | Finish eliminating CamelCase from net.c and other failures Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Clean up netconsole variables and functionsJoe Hershberger2015-04-18-15/+17
| | | | | | | | Make a thorough pass through all variables and function names contained within netconsole.c and remove CamelCase and improve naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Fix var naming net <-> eth driversJoe Hershberger2015-04-18-159/+187
| | | | | | | | | | | | | | | Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Cleanup internal packet buffer namesJoe Hershberger2015-04-18-6/+7
| | | | | | | This patch cleans up the names of internal packet buffer names that are used within the network stack and the functions that use them. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Name ethaddr variables consistentlyJoe Hershberger2015-04-18-14/+15
| | | | | | | | Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Change IPaddr_t to struct in_addrJoe Hershberger2015-04-18-29/+30
| | | | | | | | | This patch is simply clean-up to make the IPv4 type that is used match what Linux uses. It also attempts to move all variables that are IP addresses use good naming instead of CamelCase. No functional change. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add support for using the 'lo' interfaceJoe Hershberger2015-04-18-2/+69
| | | | | | | | | | | | | | | The 'lo' interface on Linux doesn't support thinks like ARP or link-layer access like we use to talk to a normal network interface. A higher-level network API must be used to access localhost. As written, this interface is limited to not supporting ICMP since the API doesn't allow the socket to be opened for all IP traffic and be able to receive at the same time. UDP is far more useful to test with, so it was selected over ICMP. Ping won't work, but things like TFTP should work. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add a bridge to a real network for sandboxJoe Hershberger2015-04-18-0/+109
| | | | | | | | | | | | | | Implement a bridge between U-Boot's network stack and Linux's raw packet API allowing the sandbox to send and receive packets using the host machine's network interface. This raw Ethernet API requires elevated privileges. You can either run as root, or you can add the capability needed like so: sudo /sbin/setcap "CAP_NET_RAW+ep" /path/to/u-boot Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add ability to disable ping reply in sandbox eth driverJoe Hershberger2015-04-18-0/+17
| | | | | | | | This is needed to test the netretry functionality (make the command fail on a sandbox eth device). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add ARP and PING response to sandbox driverJoe Hershberger2015-04-18-0/+107
| | | | | | | | | The sandbox driver will now generate response traffic to exercise the ping command even when no network exists. This allows the basic data pathways of the DM to be tested. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add network support to sandboxJoe Hershberger2015-04-18-0/+108
| | | | | | | Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: eth: Add basic driver model support to Ethernet stackJoe Hershberger2015-04-18-0/+9
| | | | | | | First just add support for MAC drivers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* net: Remove the bd* parameter from net stack functionsJoe Hershberger2015-04-18-6/+5
| | | | | | | | | | | | | This value is not used by the network stack and is available in the global data, so stop passing it around. For the one legacy function that still expects it (init op on old Ethernet drivers) pass in the global pointer version directly to avoid changing that interface. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
* sunxi: GPIO pin mux hardware-feature-specific function index definesPaul Kocialkowski2015-04-15-1/+1
| | | | | | | | | | | Each hardware feature exposed through the GPIO pin mux is usually using the same function index (for a given port), so there is no need to define one value per pin: one value per hardware feature per port is sufficient, avoids duplication and makes everything easier to understand. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* lpc32xx: add Ethernet supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+638
| | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* net: Add Intel Topcliff GMAC driverBin Meng2015-03-24-0/+767
| | | | | | | | | Add a new driver for the Gigabit Ethernet MAC found on Intel Topcliff Platform Controller Hub. Tested under 10/100 half/full duplex and 1000 full duplex modes using ping and tftpboot commands. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: Add ethernet FCS length macro in net.hBin Meng2015-03-24-4/+3
| | | | | | | | | Some ethernet drivers use their own version of ethernet FCS length macro which is really common. We define ETH_FCS_LEN in net.h and replace those custom versions in various places. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Net: macb: reset GBE bit when fallback checkingBo Shen2015-03-18-1/+1
| | | | | | | | If the GBE bit is set, when do next time autonegotiation, if the result is not 1000Mbps, it will fallback to 100Mbps checking. So, we need to clear the GBE bit. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* net: Support DMA threshold mode in DWMAC driverSonic Zhang2015-03-05-0/+5
| | | | | | - DMA threshold mode can be selected in board config head file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* net: configure DWMAC DMA by default AXI burst lengthSonic Zhang2015-03-05-1/+7
| | | | | | | | | | | | | Board can define its own AXI burst length to improve DWMAC DMA performance. v2-changes: - Avoid write burst len register when the Macro is not defined. v3-changes: - Add axi_bus register member to struct eth_dma_regs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-02-25-46/+295
|\
| * drivers/mc: Migrated MC Flibs to 0.5.2J. German Rivera2015-02-24-46/+295
| | | | | | | | | | | | | | | | | | | | | | Upgrade Manage Complex (MC) flib API to 0.5.2. Rename directory fsl_mc to fsl-mc. Change the fsl-mc node in Linux device tree from "fsl,dprcr" to "fsl-mc". Print MC version info when appropriate. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | ARM: remove cm4008 and cm41xx board supportMasahiro Yamada2015-02-24-230/+0
|/ | | | | | | | These are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Greg Ungerer <greg.ungerer@opengear.com> Acked-by: Marek Vasut <marex@denx.de>
* net: keystone_net: move serdes setup to initialization functionVitaly Andrianov2015-02-16-2/+2
| | | | | | | | | | | | | On Keystone2 devices serdes must be initialized before accessing MDIO bus. This commit moves the keystone2_net_serdes_setup() from keystone2_eth_open to keystone2_emac_initialize to meet that requirement. This also eliminates unnecessary serdes initializatin every time when the keystone2_eth_open is being called. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Nishanth Menon <nm@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-01-31-2/+93
|\
| * net/designware: add error message on DMA reset timeoutAlexey Brodkin2015-01-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If for some reason DMA module fails to reset user oserves only this: --->--- # dhcp Trying dwmac.e0018000 FAIL --->--- This message makes not much sense. With proposed change error message will be more helpful: --->--- # dhcp Trying dwmac.e0018000 DMA reset timeout FAIL --->--- For example user may do power toggle to recover board functionality. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: phy: micrel: add support for KSZ8895 switch in SMI modePhilippe De Muyter2015-01-30-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a phy driver for the Micrel KSZ8895 switch. As the SoC MAC is directly connected to the switch MAC the link to the switch is always up. But the KSZ8895 switch can be hardwired in three configuration modes : - not configurable with eventually an eeprom-stored configuration - configurable by the mdio/mdc connection (SMI protocol) - configurable by a SPI connection. In not configurable mode, the switch starts automatically, but in the other modes, it must be started programmatically, by writing 1 in configuration register 1. We only support the not configurable and mdio/mdc (aka SMI) modes here. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * Add MS7206SE ethernet supportYoshinori Sato2015-01-30-1/+30
| | | | | | | | | | Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: tsec: Fix NULL access in case init_phy() failsClaudiu Manoil2015-01-30-0/+2
| | | | | | | | | | | | | | | | If the PHY is not recognized don't access phydev (NULL) and return 0 to signal failure. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | drivers/net/e1000.c: fix compile warning under 64bit modeMinghuan Lian2015-01-30-14/+17
|/ | | | | | | Fix this: warning: cast from pointer to integer of different size Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
* kirkwood: define empty CONFIG_MVGBE_PORTS by defaultLuka Perkov2015-01-25-0/+4
| | | | | | | | | | | | | | Each board with defines it's own set of values. If we do not define CONFIG_MVGBE_PORTS we will hit following error: mvgbe.c: In function 'mvgbe_initialize': mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared (first use in this function) u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; This patch fixes above described problem. Signed-off-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* powerpc: mpc5xxx: remove Total5200 board supportMasahiro Yamada2015-01-23-5/+0
| | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-01-22-13/+678
|\
| * net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IPCodrin Ciubotariu2015-01-16-0/+498
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP is integrated in Freescale T1040 and T1020 SoCs. The L2 switch has 10 Ethernet ports: 2 internal fixed-links (ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps. The external ports may be connected to PHYs over QSGMII and SGMII. Commands have also been added to enable/disable a port and to check a port's link speed, duplexity and status. The commands are: ethsw port <port_nr> enable|disable - enable/disable an l2 switch port ethsw port <port_nr> show - show an l2 switch port's configuration port_nr=0..9; use "all" for all ports For more detailse please see doc/README.t1040-l2switch Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Enable FMAN ports if l2switch ports are connected over SGMIICodrin Ciubotariu2015-01-16-1/+2
| | | | | | | | | | | | | | | | | | | | If SerDes is configured to connect L2 Switch ports from T1040 over SGMII or QSGMII, the two FMAN fixed ports (FM1@DTSEC1 and FM2@DTSEC2) that are connected to two L2 swtch ports must be enabled. These ports don't have PHYs and must be treated accordingly. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Fix error when FMAN MAC has no PHYCodrin Ciubotariu2015-01-16-12/+18
| | | | | | | | | | | | | | | | | | | | U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * phylib: add support for aquantia PHYsShaohui Xie2015-01-16-0/+160
| | | | | | | | | | | | | | | | This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | net: ll_temac: Fix compilation warning because of phys_addr_tMichal Simek2015-01-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix the compilation warning w+../drivers/net/xilinx_ll_temac.c: In function 'll_temac_init': w+../drivers/net/xilinx_ll_temac.c:235:3: warning: format '%X' expects argument of type 'unsigned int', but argument 4 has type 'phys_addr_t' [-Wformat] introduced by "net: Declare physical address as phys_addr_t unsigned type" (sha1: 16ae7827226ce8b255245d1932e8069f00997a26). Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: gem: Use phys_addr_t instead of int for addressesMichal Simek2015-01-21-2/+3
|/ | | | | | | Use phys_addr_t for physical address declaration. It is also unsigned type instead of sign. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-12-28 05:33:27 +0000