summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
...
| * net: keystone_net: use mdio_reset functionKhoronzhuk, Ivan2014-10-23-14/+2
| | | | | | | | | | | | | | | | Don't use mdio_enable twice while eth open. Also rename it to keystone2_mdio_reset as more appropriate name. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: phy: print a number of phy that is not foundKhoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | In case when several Ethernet ports are supported it's convenient to see the number of phy that is not found. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * soc: keystone_serdes: generalize to be used by other sub systemsHao Zhang2014-10-23-1/+14
| | | | | | | | | | | | | | | | | | | | SerDes driver is used by other sub systems like PCI, sRIO etc. So modify it to be more general. The SerDes driver provides common API's that can also be extended for other peripherals SerDes configurations. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * soc: keystone_serdes: create a separate SGMII SerDes driverKhoronzhuk, Ivan2014-10-23-138/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch split the Keystone II SGMII SerDes related code from Ethernet driver and create a separate SGMII SerDes driver. The SerDes driver can be used by others keystone subsystems like PCI, sRIO, so move it to driver/soc/keystone directory. Add soc specific drivers directory like in the Linux kernel. It is going to be used by keysotone soc specific drivers. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: remove redundant code from keystone_net.cKhoronzhuk, Ivan2014-10-23-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused tx_send_loop variable. Removes duplicated get_link_status() call from the keystone2_eth_send_packet(). The emac_gigabit_enable() is called at opening Ethernet and there is no need to enable it on sending each packet. So remove that call from keystone2_eth_send_packet() as well. The calling of power/clock up functions are mostly the responsibility of SoC/board code, so move these functions to appropriate place. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: move header file from arch to ti-commonKhoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | | | | | The header file for the driver should be in correct place. So move it to "arch/arm/include/asm/ti-common/keystone_net.h" and correct driver's external dependencies. At the same time align and correct some definitions. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: remove SoC specific emac_regs structureHao Zhang2014-10-23-5/+3
| | | | | | | | | | | | | | | | | | | | This patch removes K2HK SOC specifc emac_regs structure, it uses soc specific register offset to keep the network driver common across all the Keystone II EVMs. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * dma: keystone_nav: generalize driver usageKhoronzhuk, Ivan2014-10-23-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The keystone_nav driver is general driver intended to be used for working with queue manager and pktdma for different IPs like NETCP, AIF, FFTC, etc. So the it's API shouldn't be named like it works only with one of them, it should be general names. The names with prefix like netcp_* rather do for drivers/net/keystone_net.c driver. So it's good to generalize this driver to be used for different IP's and delete confusion with real NETCP driver. The current netcp_* functions of keystone navigator can be used for other settings of pktdma, not only for NETCP. The API of this driver is used by the keystone_net driver to work with NETCP, so net driver also should be corrected. For convenience collect pkdma configurations in drivers/dma/keystone_nav_cfg.c. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * dma: keystone_nav: move keystone_nav driver to driver/dma/Khoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The keystone_nav is used by drivers/net/keystone_net.c driver to send and receive packets, but currently it's placed at keystone arch sources. So it should be in the drivers directory also. It's separate driver that can be used for sending and receiving pktdma packets by others drivers also. This patch just move this driver to appropriate directory and doesn't add any functional changes. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | net: davince: add missing includeJeroen Hofstee2014-10-25-0/+1
| | | | | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | net: fec_mxc: make local functions staticJeroen Hofstee2014-10-25-3/+5
| | | | | | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | net: phy: fix warnings with W=1Jeroen Hofstee2014-10-25-5/+2
| | | | | | | | | | | | | | | | get_phy_id is marked weak but has no protype nor a strong version, just make it static. Use __weak for board_phy_config. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | net: mvneta.c: Add support for the ethernet controller of the Marvell Armada ↵Stefan Roese2014-10-23-0/+1654
| | | | | | | | | | | | | | | | | | | | | | | | | | | | XP SoC This patch adds support for the NETA ethernet controller which is integrated in the Marvell Armada XP SoC's. This port is based on the Linux driver which has been stripped of the in U-Boot unused portions. Tested on the Marvell MV78460 eval board db-78460-bp. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Tested-by: Luka Perkov <luka@openwrt.org>
* | arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese2014-10-23-1/+1
|/ | | | | | | | | This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-10-11-27/+26
|\
| * net: dwc: Make the cache handling less crypticMarek Vasut2014-10-06-25/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a few new variables to make the cache handling less cryptic. Add a variable for DMA and DATA descriptor start and end, so the correctness of the code is easier to inspect. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
| * net: dwc: Fix cache alignment issuesMarek Vasut2014-10-06-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix remaining cache alignment issues in the DWC Ethernet driver. Please note that the cache handling in the driver is making the code hideous and thus the next patch cleans that up. In order to make this change reviewable though, the cleanup is split from it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Pavel Machek <pavel@denx.de>
| * net: phy: Cleanup drivers/net/phy/micrel.cPavel Machek2014-10-06-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Old saying says that more than three exclamation marks in a row are sign of mental disease. Cleanup micrel.c. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Chin Liang See <clsee@altera.com>
* | macb: simplify gmac initialisationAndreas Bießmann2014-10-10-17/+8
|/ | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Bo Shen <voice.shen@atmel.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-09-26-2/+0
|\
| * board/t1040qds: Add sgmii ports support in 0xA7 protocolPriyanka Jain2014-09-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | T1042QDS (T1042 is T1040 Personality without L2 switch) supports following sgmii interfaces with serdes protocol 0xA7 -SGMII-MAC3 on Lane B - slot 7 -SGMII-MAC5 on Lane H - slot 7 -SGMII2.5G-MAC1 on Lane C - slot 6 -SGMII2.5G-MAC2 on Lane D - slot 5 Add support of above sgmii interfaces Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
* | kconfig: add blank Kconfig filesMasahiro Yamada2014-09-24-0/+0
| | | | | | | | | | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | e1000: fix no nvm buildMarcel Ziswiler2014-09-24-0/+2
|/ | | | | | | | | | | Fix the following build error in case CONFIG_E1000_NO_NVM is enabled: CC drivers/net/e1000.o drivers/net/e1000.c: In function ‘e1000_initialize’: drivers/net/e1000.c:5365:5: error: ‘struct e1000_hw’ has no member named ‘eeprom_semaphore_present’ make[1]: *** [drivers/net/e1000.o] Error 1 make: *** [drivers/net] Error 2 Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-17-5/+37
|\
| * net: fec_mxc: Poll FEC_TBD_READY after polling TDARFabio Estevam2014-09-09-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When testing the FEC driver on a mx6solox we noticed that the TDAR bit gets always cleared prior then the READY bit is cleared in the last BD, which causes FEC packets reception to always fail. As explained by Ye Li: "The TDAR bit is cleared when the descriptors are all out from TX ring, but on mx6solox we noticed that the READY bit is still not cleared right after TDAR. These are two distinct signals, and in IC simulation, we found that TDAR always gets cleared prior than the READY bit of last BD becomes cleared. In mx6solox, we use a later version of FEC IP. It looks like that this intrinsic behaviour of TDAR bit has changed in this newer FEC version." Fix this by polling the READY bit of BD after the TDAR polling, which covers the mx6solox case and does not harm the other SoCs. No performance drop has been noticed with this patch applied when testing TFTP transfers on several boards of different i.mx SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * net: fec_mxc: Adjust RX DMA alignment for mx6soloxFabio Estevam2014-09-09-2/+10
| | | | | | | | | | | | | | | | | | | | | | mx6solox has a requirement for 64 bytes alignment for RX DMA transfer. Other SoCs work with the standard 32 bytes alignment. Adjust it accordingly by using 64 bytes aligment in the FEC RX DMA buffers, which addresses the needs from mx6solox and also works for the other SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* | rtl8169: Defer network packet processingThierry Reding2014-09-16-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When network protocol errors occur (such as a file not being found on a TFTP server), the processing done by the NetReceive() function will end up calling the driver's .halt() implementation. However, after that the device no longer has access to the memory buffers and will cause errors such as this in the rtl_recv() function when trying to hand descriptors back to the device: pci_hose_bus_to_phys: invalid physical address This can be fixed by deferring processing of network packets until the descriptors have been handed back. That way rtl_halt() tearing down network buffers is not going to prevent access to the buffers. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | openrisc: Fix a few type cast related warningsVasili Galka2014-09-15-4/+4
| | | | | | | | | | | | | | | | | | | | | | Use size_t type for positive offsets instead of the loff_t type. The later is defined as long long, which is larger than the pointer type on OpenRISC architecture and therefore the following warning was generated: "warning: cast to pointer from integer of different size" Signed-off-by: Vasili Galka <vvv444@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-12-20/+15
|\ \ | |/
| * keystone2: use readl/writel functions instead of redefinitionKhoronzhuk, Ivan2014-09-04-20/+15
| | | | | | | | | | | | | | | | There is no reason to redefine pure readl/writel functions. So remove this redundancy. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Vitaly Andrianov <vitalya@ti.com>
* | ls102xa: etsec: Add etsec support for LS102xAAlison Wang2014-09-08-0/+7
| | | | | | | | | | | | | | | | | | This patch is to add etsec support for LS102xA. First, Little-endian descriptor mode should be enabled. So RxBDs and TxBDs are interpreted with little-endian byte ordering. Second, TSEC_SIZE and TSEC_MDIO_OFFSET are different from PowerPC, redefine them for LS1021xA. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | net: mdio: Use mb() to be compatible for both ARM and PowerPCAlison Wang2014-09-08-3/+6
| | | | | | | | | | | | | | Use mb() instead of sync assembly instruction to be compatible for both ARM and PowerPC. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | net: Merge asm/fsl_enet.h into fsl_mdio.hClaudiu Manoil2014-09-08-5/+2
|/ | | | | | | | | | | | | | | fsl_enet.h defines the mapping of the usual MII management registers, which are included in the MDIO register block common to Freescale ethernet controllers. So it shouldn't depend on the CPU architecture but it should be actually part of the arch independent fsl_mdio.h. To remove the arch dependency, merge the content of asm/fsl_enet.h into fsl_mdio.h. Some files (like fm_eth.h) were simply including fsl_enet.h only for phy.h. These were updated to include phy.h instead. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* arm: bcm281xx: net: Add Ethernet DriverJiandong Zheng2014-08-30-0/+1535
| | | | | | | | | | | The Broadcom StarFighter2 Ethernet driver is used in multiple Broadcom SoC(s) and: - supports multiple MAC blocks, - provides support for the Broadcom GMAC. This driver requires MII and PHYLIB. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* net: cpsw: am335x: Drop constant link checking from rx/tx path'sStefan Roese2014-08-28-18/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We noticed on the DXR2 platform (AM335x with a SMSC LAN9303 switch connected to the CPSW MAC) that the network performance in U-Boot is quite poor. Only when the transfer is started without a cable connected, and the cable is plugged after the first timeout "T" occured, an increased in performance can be seen. Debugging has revealed, that the cpsw driver has constant link checking builtin into the rx and tx functions. This results in the bad performance and seems to be unnecessary. The link has already been checked in the init function, before the transfer is started. This usually is sufficient. BTW: I have seen no other network driver in U-Boot so far, that constantly checks for link in the rx / tx functions. The performance numbers on the DXR2 board are: 0.56 MiB/s cpsw_check_link() in rx and tx path 0.87 MiB/s cpsw_check_link() only in tx path 1.0 MiB/s cpsw_check_link() only in rx path 2.7 MiB/s no cpsw_check_link() in rx and tx path So with this patch the network performance on DXR2 increases from 0.56 to 2.7 MiB/s (nearly 5 times as fast). Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Samuel Egli <samuel.egli@siemens.com> Tested-by: Heiko Schocher <hs@denx.de> Cc: Vladimir Koutny <vladimir.koutny@streamunlimited.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Tom Rini <trini@ti.com>
* e1000: add i210 supportMarek Vasut2014-08-21-27/+180
| | | | | | | Add i210 support to the e1000 driver. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com>
* e1000: Implement dcache supportMarek Vasut2014-08-21-22/+49
| | | | | | | | Implement proper support for cache flushing and invalidation into the Intel e1000 NIC driver. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com>
* drivers: net: remove dead driversMasahiro Yamada2014-08-21-459/+0
| | | | | | | | | | The following configs are not defined at all: - CONFIG_INCA_IP_SWITCH - CONFIG_PBL2800_ETHER - CONFIG_PHY_ICPLUS Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* powerpc/T4240QDS/eth: some fix for XFIShaohui Xie2014-08-20-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFI is supported on T4QDS-XFI board, which removed slot3, and four LANEs of serdes2 are routed to a SFP+ cages, which to house fiber cable or direct attach cable(copper), the copper cable is used to emulate the 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. For fiber cable, there is NO PHY, while for copper cable, we need to use internal PHY which exist in Serdes to do auto-negotiation and link training, which implemented in kernel. We use hwconfig to define cable type for XFI, and fixup dtb based on the cable type. For copper cable, set below env in hwconfig: fsl_10gkr_copper:<10g_mac_name> the <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2. The four <10g_mac_name>s do not have to be coexist in hwconfig. For XFI ports, if a given 10G port will use the copper cable for 10GBASE-KR, set the <10g_mac_name> of the port in hwconfig, otherwise, fiber cable will be assumed to be used for the port. For ex. if four XFI ports will both use copper cable, the hwconfig should contain: fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2 For fiber cable: 1. give PHY address to a XFI port, otherwise, the XFI ports will not be available in U-boot, there is no PHY physically for XFI when using fiber cable, this is just to make U-boot happy and we can use the XFI ports in U-boot. 2. fixup dtb to use fixed-link in case of fiber cable which has no PHY. Kernel requests that a MAC must have a PHY or fixed-link. When using XFI protocol, the MAC 9/10 on FM1 should init as 10G interface. Change serdes 2 protocol 56 to 55 which has same feature as 56 since 56 is not valid any longer. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* vitesse: remove duplicated argument to ||maxin.john@enea.com2014-08-09-1/+0
| | | | | | Remove the duplicated argument to || check Signed-off-by: Maxin B. John <maxin.john@enea.com>
* Change Andy Fleming's email addressAndy Fleming2014-08-06-2/+2
| | | | | | | Messages to afleming@freescale.com now bounce, and should be directed to my personal address at afleming@gmail.com Signed-off-by: Andy Fleming <afleming@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-07-29-80/+81
|\
| * Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-3/+5
| |\
| | * drivers: net: cpsw: add support for using second port as ethernetMugunthan V N2014-07-25-3/+5
| | | | | | | | | | | | | | | | | | | | | Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| * | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-4/+7
| |\ \
| | * | net: sh-eth: Add support R8A7794Nobuhiro Iwamatsu2014-07-24-4/+7
| | |/ | | | | | | | | | | | | | | | | | | R8A7794 has the same sh-ether IP core as other SH/rmobile. This patch adds support of R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-73/+69
| |\ \
| | * | net: Rename and cleanup sunxi (Allwinner) emac driverStefan Roese2014-07-06-73/+69
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been 3 versions of the sunxi_emac support patch during its development. Somehow version 2 ended up in upstream u-boot where as the u-boot-sunxi git repo got version 3. This bumps the version in upstream u-boot to version 3 of the patch: - Initialize MII clock earlier so mii access to allow independent use - Name change from WEMAC to EMAC to match mainline kernel & chip manual - Cosmetic code cleanup Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-07-28-1/+8
|\ \ \ | |/ / |/| |
| * | net/fm: call fm_port_to_index() with proper checksRotariu Marian-Cristian2014-07-22-1/+8
| |/ | | | | | | | | | | | | | | Some of the fm_port_to_index() callers did not check for -1 return value and used -1 as an array index. Signed-off-by: Marian Rotariu <marian.rotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-09 10:42:50 +0000