summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* ARM: davici_emac: Fix condition for number of phy detectsPrabhakar Lad2011-12-06-1/+1
| | | | | | | | | | | Fix the condition for number of phys in davinci_eth_phy_detect() function. CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT indicates number of phys. From this commit id dc02badab480563b0bf9d3908046ea9d6b22ae63 davinci emac initilazed one less than the number of phy count. Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
* davinci_emac: hardcode 100Mbps for AM35xx and RMIIIlya Yanok2011-12-06-1/+2
| | | | | | | For some reason code setting the speed based on the PHY feedback causes troubles on AM3517 so hardcode 100Mbps for now. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* davinci_emac: fix for running with dcache enabledIlya Yanok2011-12-06-4/+42
| | | | | | | | | | | | DaVinci EMAC is present on TI AM35xx SoCs (ARMv7) which run with D-Cache enabled by default. So we have to take care and flush/invalidate the cache before/after the DMA operations. Please note that the receive buffer alignment to 32 byte boundary comes from the old driver version I don't know if it is really needed or alignment to cache line size is enough. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* davinci_emac: conditionally compile specific PHY supportIlya Yanok2011-12-06-0/+8
| | | | Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* davinci_emac: use internal addresses in buffer descriptorsIlya Yanok2011-12-06-9/+30
| | | | | | | | On AM35xx CPPI RAM had different addresses when accessed from the CPU and from the EMAC. We need to account this to deal with the buffer descriptors correctly. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* davinci_emac: move arch-independent defines to separate headerIlya Yanok2011-12-06-0/+315
| | | | | | | | | | | DaVinci EMAC is found not only on DaVinci SoCs but on some OMAP3 SoCs also. This patch moves common defines from arch-davinci/emac_defs.h to drivers/net/davinci_emac.h DaVinci specific PHY drivers hacked to include the new header. We might want to switch to phylib in future. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]XMarek Vasut2011-12-06-5/+5
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* net: Armada100: Fix compilation warningsAjay Bhargav2011-12-06-4/+10
| | | | | | | | | | | This patch fix compilation warnings for Armada100 FEC driver Ref: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* phy: Add support for SMSC LAN87xx PHYsNobuhiro Iwamatsu2011-12-05-0/+96
| | | | | | | | | | | | | | | This adds support for the SMSC LAN87xx PHYs. Following PHYs can be used by set CONFIG_PHY_SMSC to config. - SMSC LAN8700 - SMSC LAN8710/LAN8720 - SMSC LAN8710/LAN8720 A setup of PHY was copied from linux kenrel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Fixed white space errors; modified commit message a bit. Signed-off-by: Wolfgang Denk <wd@denx.de>
* drivers/net/mvgbe.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-12-05-3/+6
| | | | | | | | | | | | | | Fix: mvgbe.c: In function 'mvgbe_send': mvgbe.c:555:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] mvgbe.c: In function 'mvgbe_recv': mvgbe.c:640:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel codeZang Roy-R619112011-12-05-6/+107
| | | | | | | | | | The original m88e1111s_config() does not do the SGMII mode initialization and is buggy. Rewrite the function according to 3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org>
* net: sh_eth: use miiphybb instead of own mii functionsYoshihiro Shimoda2011-12-02-248/+104
| | | | | | | | | | The sh_eth driver had an own mii functions. However the function didn't support the gigabit PHY. The U-Boot has the general phy driver and miiphybb driver, and they already support it. So this patch removes the own functions and uses the phy driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* powerpc/85xx: clean up and document the QE/FMAN microcode macrosTimur Tabi2011-11-29-16/+16
| | | | | | | | | | | | | | | | | | | | Several macros are used to identify and locate the microcode binary image that U-boot needs to upload to the QE or Fman. Both the QE and the Fman use the QE Firmware binary format to package their respective microcode data, which is why the same macros are used for both. A given SOC will only have a QE or an Fman, so this is safe. Unfortunately, the current macro definition and usage has inconsistencies. For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address of NAND. There's no way to know by looking at a variable how it's supposed to be used. In the future, the code which uploads QE firmware and Fman firmware will be merged. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'hs@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-11-23-18/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hs@denx.de' of git://git.denx.de/u-boot-staging: drivers/net/dnet.c: Fix GCC 4.6 warnings board/xaeniax/flash.c: Fix GCC 4.6 warnings net/bootp.c: Fix GCC 4.6 warning common/cmd_bootm.c: Fix GCC 4.6 warnings board/mx1ads/mx1ads.c: Fix GCC 4.6 warning board/mx1ads/syncflash.c: Fix GCC 4.6 warnings board/lubbock/flash.c: Fix GCC 4.6 warnings drivers/net/cs8900.c: Fix GCC 4.6 warning arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings drivers/net/lan91c96.c: Fix GCC 4.6 warning board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
| * drivers/net/dnet.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-11-23-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: dnet.c: In function 'dnet_send': dnet.c:136:9: warning: variable 'len' set but not used [-Wunused-but-set-variable] dnet.c: In function 'dnet_set_hwaddr': dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] dnet.c:209:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * drivers/net/cs8900.c: Fix GCC 4.6 warningAnatolij Gustschin2011-11-23-6/+5
| | | | | | | | | | | | | | | | | | Fix: cs8900.c: In function 'get_reg_init_bus': cs8900.c:69:14: warning: variable 'c' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * drivers/net/lan91c96.c: Fix GCC 4.6 warningAnatolij Gustschin2011-11-23-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix: lan91c96.c: In function 'dump_memory_info': lan91c96.c:157:7: warning: variable 'mem_info' set but not used [-Wunused-but-set-variable] lan91c96.c: In function 'smc_send_packet': lan91c96.c:320:16: warning: variable 'ioaddr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Improve Power Management in SMC911X driver.bertrand.cachet@heig-vd.ch2011-11-22-2/+5
| | | | | | | | | | | | | | | | | | device is already in *normal* (D0) mode => it doesn't need to be wake-up. With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE bits of PM_CTRL register is in sleep (D1/D2) mode. Signed-off-by: Bertrand Cachet <bertrand.cachet@heig-vd.ch>
* | net: rtl8109: drop unused !NET_MULTI driverMike Frysinger2011-11-22-386/+0
| | | | | | | | | | | | | | No one uses this driver, and it isn't converted to the NET_MULTI framework (which we dropped recently), so drop this driver too. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | e1000: fix unused variable waring for e1000 driverZang Roy-R619112011-11-17-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build warning in drivers/net/e1000.c e1000.c: In function 'e1000_reset_hw': e1000.c:1373:11: warning: variable 'icr' set but not used [-Wunused-but-set-variable] e1000.c: In function 'e1000_phy_init_script': e1000.c:4395:11: warning: variable 'ret_val' set but not used [-Wunused-but-set-variable] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com>
* | e1000: remove duplicate macros in e1000.hTimur Tabi2011-11-17-11/+0
| | | | | | | | | | | | | | Some of the EEPROM Word Offset macros, and a few others, are defined twice in e1000.h. Signed-off-by: Timur Tabi <timur@freescale.com>
* | drivers/net/enc28j60.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-11-16-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix: enc28j60.c: In function 'enc_receive': enc28j60.c:435:5: warning: variable 'eir_reg' set but not used [-Wunused-but-set-variable] enc28j60.c: In function 'enc_poll': enc28j60.c:503:5: warning: variable 'estat_reg' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | drivers/net/at91_emac.c: Fix GCC 4.6 warningAnatolij Gustschin2011-11-16-2/+0
| | | | | | | | | | | | | | | | | | Fix: at91_emac.c: In function 'at91emac_write_hwaddr': at91_emac.c:477:15: warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | 4xx_enet.c: Fix GCC 4.6 build warningsStefan Roese2011-11-16-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix: 4xx_enet.c: In function 'ppc_4xx_eth_init': 4xx_enet.c:875:6: warning: variable 'ethgroup' set but not used [-Wunused-but-set-variable] I used "__maybe_unused" here intentionally, since all other alternatives to fix this compilation warning would result in more ifdef's. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-11-16-10/+58
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
| * | arm, davinci_emac: fix driver bug if more then 3 PHYs are detectedHeiko Schocher2011-11-15-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since commits: davinci: emac: add support for more than 1 PHYs 062fe7d332c28ede25626f448681e43d76bb312e davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM fb1d6332b5430b90a8fa8ebab709f33a60e9f816 I get following warning on the enbw_cmc board: Err: serial Net: 5 ETH PHY detected miiphy_register: non unique device name 'KSZ8873 @ 0x01' DaVinci-EMAC Hit any key to stop autoboot: 0 Also I see some debug printfs: => run load + emac_close + emac_ch_teardown - emac_ch_teardown + emac_ch_teardown - emac_ch_teardown - emac_close + emac_open - emac_open Using DaVinci-EMAC device reason is 062fe7d332c28ede25626f448681e43d76bb312e new define MAX_PHY. This is set to 3! I get on this board 5 active phys, so this leads in wrong memory writes ... so I changed: - define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT to set the MAX_PHY value, add a description in README for the new CONFIG_SYS option. - print an error message if more then MAX_PHYs are detected. - fill the active_phy_addr array in a for loop with 0xff - changed printf() in debug_emac() Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Wolfgang Denk <wd@denx.de> Cc: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tom Rini <tom.rini@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | FEC: Add support for iMX28 quirksMarek Vasut2011-11-11-2/+42
| |/ | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
* | drivers/net/fm/fm.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-2/+1
| | | | | | | | | | | | | | | | | | Fix: fm.c: In function 'fm_init_common': fm.c:398:6: warning: variable 'n' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129chenhui zhao2011-11-08-0/+93
|/ | | | | | | | | | Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-11-08-3/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board arm: jadecpu: Readd MACH_TYPE_JADECPU at91: defined mach-types for otc570 board in board config file at91: defined mach-types for meesc board in board config file mx31pdk: Enable D and I caches ehci-mxc: remove incorrect comment README: Fix supported i.MX SoC list for CONFIG_MXC_SPI mx53: Turn off child clocks before reconfigure perclk_root qong: enable support for compressed images imx: imx31_phycore.h: fix checkpatch warnings vision2: Remove unused get_board_rev function mx53smd: Remove unused get_board_rev function mx53ard: Remove unused get_board_rev function mx53evk: Remove unused get_board_rev function mx53evk: Add RTC support mx53loco: Remove unused get_board_rev function mx53evk: Remove unneeded '1' from mx53evk.h OMAP3: mvblx: Initial support for mvBlueLYNX-X ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE omap3: mem: Move comments next to definitions omap3: mem: Clean-up whitespaces omap3: mem: Define and use common macros Davinci: ea20: added PREBOOT to configuration Davinci: ea20: added I2C support Davinci: ea20: added video support VIDEO: davinci: add framebuffer to da8xx ARM: Davinci: added missing registers to hardware.h Davinci: ea20: add gpios for LCD backlight control Davinci: ea20: add gpio for keeping power on in board_late_init Davinci: ea20: Add default U-Boot environment Davinci: ea20: Add early init to get early output from console Davinci: ea20: Add NAND support Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console Davinci: ea20: set console on UART0 arm, davinci: add cam_enc_4xx support arm926ejs, davinci: add missing spi defines for dm365 arm926ejs, davinci: add cpuinfo for dm365 arm, davinci: add lowlevel function for dm365 soc arm, davinci: add header files for dm365 spl, nand: add 4bit HW ecc oob first nand_read_page function arm, davinci: add support for new spl framework spl: add option for adding post memory test to the SPL framework net, davinci_emac: make clock divider in MDIO control register configurable arm, usb, davinci: make USBPHY_CTL register configurable usb, davinci: add enable_vbus() weak function omap3evm: fix errors caused by multiple definitions omap3evm: Add (quick) configuration for NAND only omap3evm: Add (quick) configuration for MMC/SD only omap3evm: move common config options to new file omap3evm: Prepare to split configuration omap3evm: Reorder related config options omap/spl: actually enable the console davinci_emac: compilation fix, phy is array now omap3evm: Set environment variable 'ethaddr' arm, arm926: fix missing symbols in NAND_SPL mode arm, davinci: Add function lpsc_syncreset() arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD arm/km: portl2 environment address update to P1B arm/km: adapt bootcounter evaluation arm/km: enable jffs2 cmds arm/km: trigger reconfiguration for the Xilinx FPGA arm/km: add boardid and hwkey to kernel command line ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards netspace_v2: enable I2C EEPROM support netspace_v2: fix SDRAM configuration armada100: define CONFIG_SYS_CACHELINE_SIZE pantheon: define CONFIG_SYS_CACHELINE_SIZE kirkwood: define CONFIG_SYS_CACHELINE_SIZE kirkwood: drop empty asm-offsets.s file arm/km/mgcoge3un: enhance "waitforne" feature arm/km: add variable waitforne to mgcoge3un gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared ARM: dreamplug: fix compilation ARM: DockStar: fix compilation ARM: netspace_v2: fix warnings am335x: Drop board_sysinfo struct am335x: Temporarily add MACH_TYPE define misc:pmic:samsung Enable PMIC driver at C210 Universal target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target smdkv310: use macro for mmc data read function address smdkv310: use spl framework for mmc spl SMDKV310: use get_ram_size() to validate dram size SMDKV310: Initialize board id using CONFIG_MACH_TYPE ORIGEN : use absolute paths and fix tool naming ORIGEN : enable device tree support MX25: tx25: Fix building due to missing MACH_TYPE mx31: Add board support for HALE TT-01 mx31: add ESD control registers mx31: define pins and init for UART2 and CSPI3 MX35: add support for flea3 board MX51: vision2: add MACH_TYPE in config file vision2: Remove unused header file mx51evk: Remove unused get_board_rev function mx51evk: Remove unneeded '1' from mx51evk.h I2C: Fix mxc_i2c.c problem on imx31_phycore mx35pdk: Add RTC support mx51evk: Use GPIO API for configuring the IOMUX mx51evk: Add RTC support rtc: Make mc13783-rtc driver generic qong: remove unneeded IOMUX settings qong: Use mx31_set_gpr to setup USBH2 pins mx31: Introduce mx31_set_gpr function mx31pdk: Add MC13783 PMIC support qong: remove unneeded "1" from qong.h misc: pmic: fix regression in pmic_fsl.c (SPI) mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME MX35: Drop unnecessary prototypes from imx-regs.h I2C: added I2C-2 and I2C-3 to MX35 MX35: factorize common assembly code MX35: add reset cause as provided by other i.MX MX35: add pins definition for UART3 MX35: added ESDC structure to imx-regs
| * net, davinci_emac: make clock divider in MDIO control register configurableHeiko Schocher2011-11-03-2/+7
| | | | | | | | | | | | | | | | | | | | Define CONFIG_SYS_EMAC_TI_CLKDIV for setting the clkdiv value in the MDIO control register. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Sandeep Paulraj <s-paulraj@ti.com> cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * davinci_emac: compilation fix, phy is array nowIlya Yanok2011-11-03-1/+1
| | | | | | | | | | | | | | Fix compilation issues introduced by recent multiply PHY patch. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * ARM: DockStar: fix compilationAnatolij Gustschin2011-11-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build problem: mvgbe.c: In function 'mvgbe_initialize': mvgbe.c:735: warning: implicit declaration of function 'get_random_hex' dockstar.c: In function 'board_early_init_f': dockstar.c:43: warning: implicit declaration of function 'kw_config_gpio' dockstar.c: In function 'board_init': dockstar.c:113: warning: implicit declaration of function 'kw_sdram_bar' dockstar.c: In function 'set_leds': dockstar.c:161: warning: implicit declaration of function 'readl' dockstar.c:161: error: dereferencing pointer to incomplete type dockstar.c:162: warning: implicit declaration of function 'writel' dockstar.c:162: error: dereferencing pointer to incomplete type dockstar.c:163: error: dereferencing pointer to incomplete type dockstar.c:164: error: dereferencing pointer to incomplete type make[1]: *** [dockstar.o] Error 1 make: *** [board/Seagate/dockstar/libdockstar.o] Error 2 Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Prafulla Wadaskar <prafulla@marvell.com>
* | drivers/net/rtl8139.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-07-30/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: rtl8139.c: In function 'rtl8139_probe': rtl8139.c:256:15: warning: variable 'fullduplex' set but not used [-Wunused-but-set-variable] rtl8139.c:256:6: warning: variable 'speed10' set but not used [-Wunused-but-set-variable] rtl8139.c: In function 'rtl_transmit': rtl8139.c:419:16: warning: variable 'txstatus' set but not used [-Wunused-but-set-variable] Change code to use new debug macros; also fix the new errors and warnigns popping up now, like "error: 'to' undeclared" and some "warning: format '%X' expects argument of type 'unsigned int', but argument X has type 'long unsigned int'" Signed-off-by: Wolfgang Denk <wd@denx.de>
* | drivers/net/rtl8169.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-07-3/+0
| | | | | | | | | | | | | | | | | | Fix: rtl8169.c: In function 'rtl_init': rtl8169.c:742:13: warning: variable 'printed_version' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* | drivers/net/pcnet.c: Change debug code to fix build warningWolfgang Denk2011-11-07-13/+4
|/ | | | | | | | | | Fix: pcnet.c: In function 'pcnet_probe': pcnet.c:247:8: warning: variable 'chipname' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Wolfgang Grandegger <wg@denx.de>
* 4xx_enet.c: fix GCC 4.6 build warningsWolfgang Denk2011-11-03-3/+0
| | | | | | | | | | Fix: 4xx_enet.c: In function 'enet_rcv': 4xx_enet.c:1772:21: warning: variable 'ef_ptr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de>
* drivers/net/eepro100.c: fix GCC 4.6 build warningsWolfgang Denk2011-11-03-2/+0
| | | | | | | | | Fix: eepro100.c: In function 'read_hw_addr': eepro100.c:926:6: warning: variable 'eeprom' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* drivers/net/ns8382x.c: fix GCC 4.6 build warningsWolfgang Denk2011-11-03-48/+37
| | | | | | | | | | | | | | | | | | Fix: ns8382x.c: In function 'ns8382x_check_duplex': ns8382x.c:704:6: warning: variable 'hun' set but not used [-Wunused-but-set-variable] To fix this, we get rid of the NS8382X_DEBUG code and use standard debug() instead. This will now trigger a so far undetected warning: ns8382x.c:780:2: warning: format '%X' expects argument of type 'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat] Fix that, too. Signed-off-by: Wolfgang Denk <wd@denx.de>
* e1000: fix bugs from recent commitsWolfgang Denk2011-11-03-5/+6
| | | | | | | | | | | | | | Commit 114d7fc0 "e1000: Rewrite EEPROM checksum error to give more information" failed to initialize the checksum variable which should result in random results. Fix that. Commit 2326a94d caused a ton of "unused variable 'x'" warnings. Fix these. While we are at it, remove some bogus parens. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
* e1000: Allow direct access to the E1000 SPI EEPROM deviceKyle Moffett2011-10-28-1/+657
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a part of the manufacturing process for some of our custom hardware, we are programming the EEPROMs attached to our Intel 82571EB controllers from software using U-Boot and Linux. This code provides several conditionally-compiled features to assist in our manufacturing process: CONFIG_CMD_E1000: This is a basic "e1000" command which allows querying the controller and (if other config options are set) performing EEPROM programming. In particular, with CONFIG_E1000_SPI this allows you to display a hex-dump of the EEPROM, copy to/from main memory, and verify/update the software checksum. CONFIG_E1000_SPI_GENERIC: Build a generic SPI driver providing the standard U-Boot SPI driver interface. This allows commands such as "sspi" to access the bus attached to the E1000 controller. Additionally, some E1000 chipsets can support user data in a reserved space in the E1000 EEPROM which could be used for U-Boot environment storage. CONFIG_E1000_SPI: The core SPI access code used by the above interfaces. For example, the following commands allow you to program the EEPROM from a USB device (assumes CONFIG_E1000_SPI and CONFIG_CMD_E1000 are enabled): usb start fatload usb 0 $loadaddr 82571EB_No_Mgmt_Discrete-LOM.bin e1000 0 spi program $loadaddr 0 1024 e1000 0 spi checksum update Please keep in mind that the Intel-provided .eep files are organized as 16-bit words. When converting them to binary form for programming you must byteswap each 16-bit word so that it is in little-endian form. This means that when reading and writing words to the SPI EEPROM, the bit ordering for each word looks like this on the wire: Time >>> ------------------------------------------------------------------ ... [7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8], ... ------------------------------------------------------------------ (MSB is 15, LSB is 0). Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Ben Warren <biggerbadderben@gmail.com>
* e1000: Export core EEPROM access functions for SPI supportKyle Moffett2011-10-28-17/+24
| | | | | | | | | | | | A followup patch will be adding a configurable feature to enable programming of E1000 EEPROMs from the command line or via the generic U-Boot SPI interface. In order for it to work it needs access to certain E1000-internal functions, so export those in the e1000.h header file. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Ben Warren <biggerbadderben@gmail.com>
* e1000: Rewrite EEPROM checksum error to give more informationKyle Moffett2011-10-28-18/+28
| | | | | | | | As an aide to debugging, we should print out the expected value of the EEPROM checksum in addition to just saying that it is wrong. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Ben Warren <biggerbadderben@gmail.com>
* e1000: Restructure and streamline PCI device probingKyle Moffett2011-10-28-71/+74
| | | | | | | | | | | | | | | | | | | | | | | By allocating the e1000 device structures much earlier, we can easily generate better error messages and siginficantly clean things up. The only user-visable change (aside from reworded error messages) is that a detected e1000 device which fails to initialize due to software or hardware error will still be allocated a device number. As one example, consider a system with 2 e1000 PCI devices where the first controller has a corrupted EEPROM. Using the old code the second controller would be "e1000#0", while with this change it would be "e1000#1". This change should hopefully make such EEPROM errors much more straightforward to handle correctly in boot scripts and the like. It is also necessary for a followup patch which allows SPI programming of an e1000 controller's EEPROM even if the checksum is invalid. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Ben Warren <biggerbadderben@gmail.com>
* e1000: Clean up handling of dual-port NICs and support 82571Kyle Moffett2011-10-28-39/+33
| | | | | | | Consolidate the test for a dual-port NIC to one location for easy modification, then fix support for the dual-port 82571. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-10-28-74/+137
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: ARM: Add Calxeda Highbank platform dkb: make mmc command as default enabled Marvell: dkb: add mmc support ARM: pantheon: add mmc definition davinci: remove config.mk file from the sources ARM:AM33XX: Add support for TI AM335X EVM ARM:AM33XX: Added timer support ARM:AM33XX: Add emif/ddr support ARM:AM33XX: Add clock definitions ARM:AM33XX: Added support for AM33xx omap3/emif4: fix registers definition davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM davinci: emac: add support for more than 1 PHYs davinci: emac: add new features to autonegotiate for EMAC da850evm: Move LPSC configuration to board_early_init_f() omap4_panda: Build in cmd_gpio support on panda omap: Don't use gpio_free to change direction to input mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset OMAP3: overo : Add environment variable optargs to bootargs OMAP3: overo: Move ethernet CS4 configuration to execute based on board id OMAP3: overo : Use ttyO2 instead of ttyS2. da830: add support for NAND boot mode dm36x: revert cache disable patch dm644X: revert cache disable patch devkit8000: Add malloc space omap: spl: fix build break due to changes in FAT OMAP3 SPL: Provide weak omap_rev_string omap: beagle: Use ubifs instead of jffs2 for nand boot omap: overo: Disable pull-ups on camera PCLK, HS and VS signals omap: overo: Configure mux for gpio10 SPL: Add DMA library omap3: Add interface for omap3 DMA omap3: Add DMA register accessors omap3: Add Base register for DMA arm, davinci: add missing LSPC define for MMC/SD1 U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. DaVinci: correct MDSTAT.STATE mask omap4: splitting padconfs into common, 4430 and 4460 omap4: adding revision detection for 4460 ES1.1 omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL gplug: fixed build error as a result of code cleanup patch kirkwood_spi: add dummy spi_init() gpio: mvmfp: reduce include platform file ARM: orion5x: reduce dependence of including platform file serial: reduce include platform file for marvell chip ARM: kirkwood: reduce dependence of including platform file ARM: armada100: reduce dependence of including platform file ARM: pantheon: reduce dependence of including platform file Armada100: Add env storage support for Marvell gplugD Armada100: Add SPI flash support for Marvell gplugD Armada100: Add SPI support for Marvell gplugD SPI: Add SPI driver support for Marvell Armada100 dreamplug: initial board support. imx: fix coding style misc: pmic: drop old Freescale's pmic driver MX31: mx31pdk: use new pmic driver MX31: mx31ads: use new pmic driver MX31: mx31_litekit: use new pmic driver MX5: mx53evk: use new pmic driver MX5: mx51evk: use new pmic driver MX35: mx35pdk: use new pmic driver misc: pmic: addI2C support to pmic_fsl driver misc: pmic: use I2C_SET_BUS in pmic I2C MX5: efikamx/efikasb: use new pmic driver MX3: qong: use new pmic driver RTC: Switch mc13783 to generic pmic code MX5: vision2: use new pmic driver misc: pmic: Freescale PMIC switches to generic PMIC driver misc:pmic:samsung Enable PMIC driver at GONI target misc:pmic:max8998 MAX8998 support at a new PMIC driver. misc:pmic:core New generic PMIC driver mx31pdk: Remove unneeded config mx31: provide readable WEIM CS accessor MX51: vision2: Set global macros I2C: Add i2c_get/set_speed() to mxc_i2c.c ARM: Update mach-types devkit8000: Add config to enable SPL MMC boot devkit8000: protect board_mmc_init arm, post: add missing post_time_ms for arm cosmetic, post: Codingstyle cleanup arm, logbuffer: make it compileclean tegra2: Enable MMC for Seaboard tegra2: Add more pinmux functions tegra2: Rename PIN_ to PINGRP_ tegra2: Add more clock functions tegra2: Clean up board code a little tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
| * davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUMManjunath Hadli2011-10-27-7/+7
| | | | | | | | | | | | | | | | | | remove macro CONFIG_EMAC_MDIO_PHY_NUM and depending macro EMAC_MDIO_PHY_NUM as they are no longer needed with the support for more than 1 PHYs in davinci emac driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * davinci: emac: add support for more than 1 PHYsManjunath Hadli2011-10-27-65/+100
| | | | | | | | | | | | | | | | | | | | add support for more than 1 PHYs. Many of the davinci platforms have more than 1 PHYs on thier board. This patch extends support in davinci emac driver for upto 3 PHYs. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * davinci: emac: add new features to autonegotiate for EMACManjunath Hadli2011-10-27-2/+28
| | | | | | | | | | | | | | | | | | | | add more features like DUPLEX, 100MB link speed etc to auto negotiate in EMAC driver. EMAC controller autonegotiates for these features with PHYs which are on the board. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * ARM: kirkwood: reduce dependence of including platform fileLei Wen2011-10-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Signed-off-by: Lei Wen <leiwen@marvell.com>
generated by cgit v1.1 at 2024-12-19 17:05:49 +0000