summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.Daniel Hellstrom2008-03-30-0/+759
| | | | | | | | | | | | | GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without a debug link (EDCL). The GRETH core is documented in GRIP.pdf available at www.gaisler.com. If the GRETH has GigaBit support (GBIT, Scatter gather, checksum offloading etc.) can be determined by a bit in the control register. The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* ColdFire: Fix FEC transmit issue for MCF5275Tsi-Chung Liew2008-03-30-0/+7
| | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Cleanup coding style, update CHANGELOGWolfgang Denk2008-03-26-3/+3
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* tsec: fix link detection for the RTL8211B PHYAnton Vorontsov2008-03-25-2/+3
| | | | | | | | | | | RTL8211B sets link state register after autonegotiation complete, so with bootdelay=0 RTL8211B will report lack of the link. To fix this, we should wait for aneg to complete, even if the link is currently down. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* NET: Add Vitesse VSC7385 firmware uploadingTimur Tabi2008-03-25-0/+102
| | | | | | | | | | | | | | | The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX and other boards. A small firwmare must be uploaded to its on-board memory before it can be enabled. This patch adds the code which uploads firmware (but not the firmware itself). Previously, this feature was provided by a U-Boot application that was made available only on Freescale BSPs. The VSC7385 firmware must still be obtained separately, but at least there is no longer a need for a separate application. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Coding Style cleanyp; update CHANGELOGWolfgang Denk2008-03-26-48/+41
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* net: Add support AX88796L ethernet devicegoda.yusuke2008-03-25-0/+223
| | | | | | | | AX88796L is device of NE2000 compatible. This patch support AX88796L ethernet device. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ne2000 driver: change #ifdef to Makefile conditional compilationWolfgang Denk2008-03-25-4/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* net: Divided code of NE2000 ethernet drivergoda.yusuke2008-03-25-355/+456
| | | | | | | | | There are more devices of the NE2000 base. A present code is difficult for us to support more devices. To support more NE2000 clone devices, separated the function. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net/Blackfin: move on-chip MAC driver into drivers/net/Mike Frysinger2008-03-25-0/+613
| | | | | | | | The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board directory, but it is not board specific, so relocate it to the drivers dir so that other Blackfin ports can utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* smc91111: use SSYNC() rather than asm(ssync) for BlackfinMike Frysinger2008-03-25-2/+2
| | | | | | | | Since the "ssync" instruction may have hardware anomalies associated with it, have the smc91111 driver use the SSYNC macro rather than invoking it directly. We workaround all the anomalies via this macro. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()Nobuhiro Iwamatsu2008-03-08-0/+14
| | | | | | | | | | When rtl_recv() of rtl8169 is called, OWNbit of status register is not enable occasionally. rtl_recv() doesn't work normally when the driver doesn't do appropriate processing. This patch fix this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* uli526x: Fix multiple differ in signedness and parentheses around comparisonJean-Christophe PLAGNIOL-VILLARD2008-02-22-5/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* AT91CAP9 support : MACB changesStelian Pop2008-02-14-0/+14
| | | | | Signed-off-by: Stelian Pop <stelian <at> popies.net> Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
* Fix remaining CONFIG_COMMANDSJean-Christophe PLAGNIOL-VILLARD2008-02-14-21/+14
| | | | | | | update comments Fix coding style Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Remove duplicate defines for ARRAY_SIZEKumar Gala2008-02-14-2/+0
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2008-01-23-0/+572
|\
| * ColdFire: Add MCF547x_8x FEC driverTsiChungLiew2008-01-17-0/+572
| | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off by: John Rigby <jrigby@freescale.com>
* | drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).Shinya Kuribayashi2008-01-16-1/+1
| | | | | | | | | | | | | | | | | | | | | | rx_status on the memory is basically in LE, but needs to be handled in CPU endian. le32_to_cpu() takes up this mission. Even if on the sane hardware, it'll work fine. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Cc: Masami Komiya <mkomiya@sonare.it> Cc: Lucas Jin <lucasjin@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | drivers/net/rtl8139.c: Fix cache coherency issuesShinya Kuribayashi2008-01-16-1/+5
| | | | | | | | | | | | | | | | | | | | Current driver is meant for cache coherent systems. This patch adds flush_cache() routines to support cache non-coherent systems. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Cc: Masami Komiya <mkomiya@sonare.it> Cc: Lucas Jin <lucasjin@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | drivers/net/rtl8139.c: Fix tx timeoutShinya Kuribayashi2008-01-16-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it does, the condition "(currticks() < to)" becomes invalid and immediately leads to tx timeout error. This patch introduces the fine-graded udely(10) loops to ease the impact of wrapping around. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Cc: Masami Komiya <mkomiya@sonare.it> Cc: Lucas Jin <lucasjin@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | TSEC: Add the support for RealTek RTL8211B PHYDave Liu2008-01-16-0/+93
| | | | | | | | | | | | | | | | Add the support of RealTek RTL8211B PHY, the RTL8211B PHY only supports RGMII and MII mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO busmichael.firth@bt.com2008-01-16-20/+12
|/ | | | | | | | | The current TSEC driver limits MDIO access to the devices that have been configured as attached to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands. Signed-off-by: Michael Firth <michael.firth@bt.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fix Ethernet init() return codesBen Warren2008-01-10-17/+18
| | | | | | | | | | | | | | | | | | Change return values of init() functions in all Ethernet drivers to conform to the following: >=0: Success <0: Failure All drivers going forward should return 0 on success. Current drivers that return 1 on success were left as-is to minimize changes. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-By: Timur Tabi <timur@freescale.com>
* fix various commentsMarcel Ziswiler2008-01-09-4/+3
| | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* fix comments with new drivers organizationMarcel Ziswiler2008-01-09-1/+1
| | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* Fix endianness conversions in rtl8169 driverGuennadi Liakhovetski2008-01-09-55/+45
| | | | | | | | | | It is unclear on what platforms this driver has been tested, since noone up to now defines CONFIG_RTL8169 in the board configuration header. Now it has been fixed for a big-endian mpc8241 based linkstation platform. This patch presents the necessary endianness conversion fixes. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* mpc83xx: Add the support of MPC837xEMDS boardDave Liu2008-01-08-0/+10
| | | | | | | | | | | The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
* drivers/net : move net drivers to drivers/netJean-Christophe PLAGNIOL-VILLARD2007-11-25-1/+87034
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* [FIX] remove files form repositoryMichal Simek2007-09-16-898/+0
|
* Synchronize with U-BOOT mainlineMichal Simek2007-09-15-1/+2
|
* Merge git://www.denx.de/git/u-bootMichal Simek2007-09-11-3/+599
|\
| * Fix some build errors.Wolfgang Denk2007-08-19-2/+2
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * ColdFire: Add M54455EVB for MCF5445xTsiChungLiew2007-08-16-7/+20
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: MCF5329 Update and cleanupTsiChungLiew2007-08-16-5/+5
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * Declared attributes of void __mii_init(void) as an alias for int mii_init(void)TsiChungLiew2007-08-08-1/+1
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * Cache update and added CFG_UNIFY_CACHETsiChung2007-07-10-18/+8
| | | | | | | | | | | | Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. Signed-off-by: TsiChung <tcliew@Goku.(none)>
| * Header file update, clean up and cache handlingTsiChungLiew2007-07-10-33/+33
| | | | | | | | | | | | Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * Added M5329AFEE and M5329BFEE PlatformsTsiChung Liew2007-06-18-0/+639
| | | | | | | | | | | | | | | | Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* [FIX] Remove unused include fileMichal Simek2007-08-16-1/+0
|
* [FIX] remove cute codeMichal Simek2007-08-06-296/+318
|
* [FIX] Coding style cleanupMichal Simek2007-08-05-41/+40
|
* [PATCH] Added support for Xilinx Emac community driverMichal Simek2007-08-05-1/+501
|
* [PATCH] Support for Xilinx EmacLite controllerMichal Simek2007-07-16-0/+423
generated by cgit v1.1 at 2024-12-26 23:25:17 +0000