summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* net: lpc32xx: eth buffers base configSylvain Lemieux2015-08-13-3/+5
| | | | | | | | Add support to specify the Ethernet buffer base address; if none are supply by the board, the default value is use (from existing code). Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: Increase autoneg timeout to 8 secondsStefan Roese2015-08-12-2/+2
| | | | | | | | | | | The current 4.5 timeout for the autonegotiation are not enough to complete it on my platform. Using the Intel E1000 PCIe card in the Marvell db-mv784mp-gp eval board. So lets increase the timeout to 8 seconds. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org>
* net: phy: broadcom: Add BCM Cygnus PHYJiandong Zheng2015-08-11-0/+29
| | | | | | | | Add Ethernet PHY for BCM Cygnus SoC Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: delay only if reset handler is registeredJörg Krause2015-08-11-3/+5
| | | | | | | | With commit e3a77218a256edbe201112a39beeed8adcabae3f the MII bus is only reset if a reset handler is registered. If there is no reset handler there is no need to wait for a device to come out of the reset. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
* net: phy: fix data type of phy_idJörg Krause2015-08-11-1/+1
| | | | | | phy_id is declared as u32 in create_phy_by_mask and in struct phy_device. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
* qoriq eth.c bugfix: handle received corrupted frames correctlyDaniel Inderbitzin2015-08-11-2/+3
| | | | | | | | The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com>
* net: lpc32xx: add RMII phy mode supportVladimir Zapolskiy2015-08-11-3/+17
| | | | | | | | | | | | | | | | | | LPC32xx MAC and clock control configuration requires some minor quirks to deal with a phy connected by RMII. It's worth to mention that the kernel and legacy BSP from NXP sets SUPP_RESET_RMII == (1 << 11) bit, however the description of this bit is missing in shared LPC32x0 User Manual UM10326 Rev. 3, July 22, 2011 and in LPC32x0 Draft User Mannual Rev. 00.27, November 20, 2008, also in my tests an SMSC LAN8700 phy device connected over RMII seems to work correctly without touching this bit. Add support of RMII, if CONFIG_RMII is defined, this option is aligned with a number of boards, which already define the same config value. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* net: lpc32xx: improve MAC configuration on reset and initializationVladimir Zapolskiy2015-08-11-18/+15
| | | | | | | | | | | | | | | | | | This change rearranges general MAC configuration and PHY specific configuration of MAC registers (duplex mode and speed), before this change set bits related to PHY configuration in MAC2 and COMMAND registers are rewritten by the following writing to the registers. Without the change auto negotiation on boot quite often is not completed in reasonable time: Waiting for PHY auto negotiation to complete......... TIMEOUT ! Additionally MAC1_SOFT_RESET clear bit is removed since it is done in preceding lpc32xx_eth_initialize() and in lpc32xx_eth_halt(), instead added missing MCFG_RESET_MII_MGMT on device initialization. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR idVladimir Zapolskiy2015-08-11-1/+1
| | | | | | | | | | | The lpc32xx_eth_phylib_init() function is capable to connect LPC32XX MAC to some specified phy by phy id, by chance the single user of lpc32xx_eth has CONFIG_PHY_ADDR set to 0, however other boards may have non-zero CONFIG_PHY_ADDR value, fix it. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: lpc32xx: correct command register reset valueVladimir Zapolskiy2015-08-11-1/+1
| | | | | | | | | | | | | | | | | | According to LPC32x0 User Manual the following bits in Command register 0x3106_0100 are defined: Bit Symbol 2 - Unused 3 RegReset 4 TxReset 5 RxReset Fix wrong (1-bit shifted right) COMMAND_RESETS value, which sets an unused bit, but neglects RxReset. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: davinci_emac: don't teardown inactive rx channelJeroen Hofstee2015-08-11-1/+2
| | | | | | | | | | Tearing down an unitialized rx channel causes a pending address hole event to be queued. When booting linux it will report this pending as something like "Address Hole seen by USB_OTG at address 57fff584", since u-boot did not handled this interrupt. Prevent that by not tearing down the rx channel, when not receiving. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* net: Add support for Marvell 88E1510 PHYClemens Gruber2015-08-11-0/+30
| | | | | | | | | | | Support the 88E1510 PHY which is very similar to the 88E1518. I also set the INTn output and configured the LEDs. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Hao Zhang <hzhang@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: Improve 88E151x PHY initializationClemens Gruber2015-08-11-14/+23
| | | | | | | | | | | - The EEE fixup magic should also be enabled for RGMII - Improved comments Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Hao Zhang <hzhang@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: macb: add gmac multi-queue supportWu, Josh2015-08-11-0/+42
| | | | | | | | | | | | | | | This patch refer to linux kernel commit: d8b763e1e79f net/macb: add TX multiqueue support for gem by: Cyrille Pitchen 1. macb driver will check the register to find how many queues support for this chip. 2. Then as we only use queue0 for tx, so we will set up all other queues use a dummy descriptor, which USED bit is set. So those queues are not used. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net/phy: set led for rtl8211f phyShengzhou Liu2015-08-11-0/+8
| | | | | | | Initialize LCR rigister to configure green LED for Link, yellow LED for Active. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* e1000: remove unnecessary clearing of SWSM.SWSM_SMBITim Harvey2015-08-11-4/+0
| | | | | | | | | | | | | | | | | | | | | remove unnecessary clearing of SWSM.SWSM_SMBI when obtaining the SW semaphore. This was introduced in 951860634fdb557bbb58e0f99215391bc0c29779 while adding i210 support and should be now resolved by releasing the semaphore when no longer needed. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* Revert "e1000: fix sw fw sync on igb i210/i211"Tim Harvey2015-08-11-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 17da7120249bfdef877f46be5bbcb3cc01212eb9. The i210/i211 do have the SW_FW_SYNC (0x5b5c) register and this is what should be used when acquiring the semaphore. I believe the issue that this patch was trying to resolve is now resolved by properly releasing the semaphore once no longer needed. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* e1000: releasing semaphore once no longer neededTim Harvey2015-08-11-0/+22
| | | | | | | | | | | | | | | | | | | | Once the hwsw semaphore is acquired, it must be released when access to the hw is completed. Without this subsequent calls to acquire will timeout obtaining the semaphore. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* net: designware: Rename the driver var name to eth_designwareMarek Vasut2015-08-08-1/+1
| | | | | | | | | The driver variable name is eth_sandbox, which is probably a copy-paste mistake. Fix it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: designware: Add SoCFPGA GMAC DT compatible stringMarek Vasut2015-08-08-0/+1
| | | | | | | | Add the OF compatible property to match the SoCFPGA GMAC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/fsl-mc: flib changes for mc 8.0.0Prabhakar Kushwaha2015-08-03-129/+261
| | | | | | | | | MC firware version 8.0.0 contains new command flags. This patch contains modifications in FLIB files to support the new command flags. Signed-off-by: Itai Katz <itai.katz@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-15/+5
|\
| * net: fec_mxc: remove useless struct nbufAlbert ARIBAUD \(3ADEV\)2015-07-10-15/+5
| | | | | | | | | | | | | | | | This locally defined struct is actually only used once and as an opaque type. Remove it for clarity. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-07-28-7/+19
|\ \
| * | net: gem: Extend timeout valueMichal Simek2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | Extend time for MDIO. (Because of zed board) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | zynq: gem: Setting up WRAP bit for one TX bdMichal Simek2015-07-28-1/+2
| | | | | | | | | | | | | | | | | | | | | Setting up WRAP bit to indicate that this is the last TX BD in the chain. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | zynq: gem: Increase the Rx buffer descriptors to 32Siva Durga Prasad Paladugu2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the Rx Buffer descriptors to 32. This will avoid Rx buffer descriptors overflow if more packets were received at one shot before we process the received ones. This fixes the issue of intermittent timeouts during tftp on a 1Gb connection with tftp server running on windows. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | zynqmp: gem: Flush the rx buffers while transmittingSiva Durga Prasad Paladugu2015-07-28-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Flush and invalidate the rx buffers while sending the tx packet it self as armv8 does flush also while doing invalidation. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | zynqmp: gem: Set data bus width to 64bit for arm64Siva Durga Prasad Paladugu2015-07-28-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | Set the data bus width to 64-bit AMBA Databus width in config register. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | keystone2: net: add mcast function to keyston2 Ethernet driverVitaly Andrianov2015-07-27-0/+10
|/ / | | | | | | | | | | | | | | | | | | | | The MCAST_TFTP support requires that network drivers has mcast functon implemented. This commit adds dummy keystone2_eth_bcast_addr() to meet the requirement. As far as the driver doesn't use ALE and doesn't filter any incoming packets, the function is empty. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | dm: eth: Avoid blocking on packet receptionSimon Glass2015-07-21-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices can take a long time to work out whether they have a new packet or now. For example the ASIX USB Ethernet dongle can take 5 seconds to do this, since it waits until it gets a new packet on the wire before allowing the USB bulk read packet to be submitted. At present with driver mode the Ethernet receive code reads 32 packets. This can take a very long time if we must wait for all 32 packets. The old code (before driver model) worked by reading a single set of packets from the USB device, then processing all the packets with in. It would be nice to use the same behaviour with driver model. Add a flag to the receive method which indicates that the driver should try to find a packet if available, by consulting the hardware. When the flag is not set, it should just return any packet data it has already received. If there is none, it should return -EAGAIN so that the loop will terminate. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: eth: Add driver-model support to the rtl8169 driverSimon Glass2015-07-21-49/+187
| | | | | | | | | | | | | | This driver is used by the Intel Minnowmax board. Convert it to driver model so it can use the new Ethernet implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | driver/ldpaa_eth:Avoid infinite loop in ldpaa_eth_rxPrabhakar Kushwaha2015-07-20-1/+8
| | | | | | | | | | | | | | | | Change infinite loop mechanism to timer based polling for QBMAN release in ldpaa_eth_rx. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | driver/ldpaa_eth: Avoid TX conf framesPrabhakar Kushwaha2015-07-20-111/+4
| | | | | | | | | | | | | | | | | | | | | | Polling of TX conf frames is not a mandatory option. Packets can be transferred via WRIOP without TX conf frame. Configure ldpaa_eth driver to use TX path without confirmation frame Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | driver/ldpaa_eth: Add timeout handling DQRR entry readPrabhakar Kushwaha2015-07-20-14/+22
| | | | | | | | | | | | | | | | | | | | | | Volatile command does not return frame immidiately, need to wait till a frame is available in DQRR. Ideally it should be a blocking call. Add timeout handling for DQRR frame instead of retry counter. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | driver/ldpaa_eth: Retry enqueue if portal was busyPrabhakar Kushwaha2015-07-20-2/+30
| | | | | | | | | | | | | | | | | | | | | | Do not immediately return if the enqueue function returns -EBUSY; re-try mulitple times. if timeout occures, release the buffer. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/fsl-mc: dynamically create ICID pool in DPCStuart Yoder2015-07-20-0/+36
| | | | | | | | | | | | | | | | | | | | delete any existing ICID pools in the DPC and create a new one based on the stream ID partitioning for the SoC Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/fsl-lsch3: partition stream IDsStuart Yoder2015-07-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Stream IDs on ls2085a devices are not hardwired and are programmed by sw. There are a limited number of stream IDs available, and the partitioning of them is scenario dependent. This header defines the partitioning between legacy, PCI, and DPAA2 devices. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers: fsl-mc: Return error for major version mismatchPrabhakar Kushwaha2015-07-20-2/+7
| | | | | | | | | | | | | | | | | | | | Management complex major version should match to the firmware present in flash. Return error during mismatch of major version. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers: fsl-mc: Update qbman driverPrabhakar Kushwaha2015-07-20-37/+53
| | | | | | | | | | | | | | | | | | | | | | | | Update qbman driver - As per latest available qbman driver - Use of atomic APIs Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Geoff Thorpe <Geoff.Thorpe@freescale.com> CC: Haiying Wang <Haiying.Wang@freescale.com> CC: Roy Pledge <Roy.Pledge@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers: fsl-mc: Update flibs to mc-0.6.0.1Prabhakar Kushwaha2015-07-20-6/+8
| | | | | | | | | | | | | | | | | | | | Update flibs changes to mc-0.6.0.1 for dpmang, dprc, dpni and dpio objects Also rename qbman_portal_ce/ci_paddr to qbman_portal_ce/ci_offset in dpio_attr. These are now offsets from the SoC QBMan portals base. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/fsl-mc: Autoload AOIP image from NOR flashJ. German Rivera2015-07-20-0/+23
| | | | | | | | | | | | | | | | | | Load AIOP image from NOR flash into DDR so that the MC firmware the MC fw can start it at boot time Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | driver/ldpaa_eth:Flush buffer before seeding BMAN after TX_confPrabhakar Kushwaha2015-07-20-0/+1
| | | | | | | | | | | | | | | | Flush buffer before releasing to BMan after TX_conf to ensure, the core does not have any cachelines that the WRIOP will DMA to. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/fsl-mc: Make MC boot error messages more readableJ. German Rivera2015-07-20-18/+13
| | | | | | | | | | | | | | | | | | Make it easier for the user to notice when the MC firmware had problems booting. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | driver/fsl_debug_server: Fix the DDR hide logic for LS2085aBhupesh Sharma2015-07-20-8/+0
|/ | | | | | | | | | This patch fixes the DDR hide logic for LS2085a, correcting the way the Debug Server FW and MC FW images are placed on the top of system DDR and how the rest of the system DDR space is made visibile to Linux. Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net: designware: Program MAC address to hardware after soft resetBin Meng2015-07-08-0/+6
| | | | | | | | | | commit f566c99 "net: Update hardware MAC address if it changes in env" removes writing MAC address to designware controller after soft reset. This makes designware ethernet port fail to work. Actually the MAC address should always be programmed after soft reset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Move defaults from config_cmd_default.h to KconfigJoe Hershberger2015-06-25-0/+1
| | | | | | | | | | This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
* net: Remove all calls to net_random_ethaddr()Joe Hershberger2015-05-20-9/+0
| | | | | | | | | | | | | Remove the calls to net_random_ethaddr() that some boards and some drivers are calling. This is now implemented inside of net/eth.c Enable the feature for all boards that previously enabled it. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part) Series-changes: 2 -Fixed bfin build errors
* net: Remove all references to CONFIG_ETHADDR and friendsJoe Hershberger2015-05-19-14/+3
| | | | | | | | | | We really don't want boards defining fixed MAC addresses in their config so we just remove the option to set it in a fixed way. If you must have a MAC address that was not provisioned, then use the random MAC address functionality. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* net: phy: Add support for all targets which requires MANUAL_RELOCMichal Simek2015-05-19-0/+16
| | | | | | | | | | | Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA relocation (mostly only GOT) where functions aray are not updated. This patch is fixing function pointers passed to phy_register function. This patch was tested on Microblaze architecture. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-12-19 06:48:12 +0000