summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* MPC5200 FEC MII speed registerJon Smirl2009-03-13-7/+16
| | | | | | Set a non-zero speed in the MII register so that MII commands will work. Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
* tsec: report when there is no vendor specific PHY supportPaul Gortmaker2009-03-09-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit af1c2b84 added a generic phy support, with an ID of zero and a 32 bit mask; meaning that it will match on any PHY ID. The problem is that there is a test that checked if a matching PHY was found, and if not, it printed the non-matching ID. But since there will always be a match (on the generic PHY, worst case), this test will never trip. In the case of a misconfigured PHY address, or of a PHY that isn't explicitly supported outside of the generic support, you will never see the ID of 0xffffffff, or the ID of the real (but unsupported) chip. It will silently fall through onto the generic support. This change makes that test useful again, and ensures that the selection of generic PHY support doesn't happen without some sort of notice. It also makes it explicitly clear that the generic PHY must be last in the PHY table. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andy Fleming <afleming@freescale.com>
* smc911x: split out useful defines/functions into local headerMike Frysinger2009-02-25-455/+496
| | | | | | | | | | | | | | The smc911x driver has a lot of useful defines/functions which can be used by pieces of code (such as example eeprom programmers). Rather than forcing each place to duplicate these defines/functions, split them out of the smdc911x driver into a local header. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Guennadi Liakhovetski <lg@denx.de> CC: Magnus Lilja <lilja.magnus@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com>
* Added Vitesse VSC8211 definitions to TSEC driverPieter Henning2009-02-22-0/+30
| | | | | | | | Added the struct containing PHY settings for the Vitesse VSC8211 phy to the phy_info list in tsec.c Signed-off-by: Pieter Henning <phenning@vastech.co.za> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Coding Style cleanup; update CHANGELOGWolfgang Denk2009-02-22-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-02-19-0/+563
|\
| * dnet: driver for Dave DNET ethernet controllerIlya Yanok2009-02-10-0/+563
| | | | | | | | | | | | | | | | Driver for Dave DNET ethernet controller (used on Dave/DENX QongEVB-LITE board). Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | net: removed board-specific CONFIGs from MPC5xxx FEC driverBen Warren2009-02-09-25/+3
| | | | | | | | | | | | | | Added new CONFIG options for the three type of MAC-PHY interconnect and applied them all relevant board config files Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | tsec: Fix a bug in soft-resettingAndy Fleming2009-02-09-0/+1
| | | | | | | | | | | | | | | | | | | | SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30 clock cycles, so it's been mostly working. But we had no guarantee, and at slower bitrates, it's just over a microsecond (over 1000 clock cycles). This enforces a 2 microsecond gap between assertion and deassertion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Fix 100Mbs ethernet operation on sh7763 based boardsSimon Munton2009-02-09-1/+1
| | | | | | | | | | | | | | | | 100Mbs ethernet does not work on sh7763 chips due to the wrong value being used in the GECMR register. Following diff fixes the problem Signed-off-by: Simon Munton <simon@nidoran.m5data.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii commandRichard Retanubun2009-02-06-8/+19
|/ | | | | | | | Modified mii_init to support boards with PHYs that are not set to autonegotiate, but still want to use u-boot's mii commands to probe the smi bus. Such PHYs will not set the Autonegotiate-done bit. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
* Blackfin: bfin_mac: cleanup pointer/casts for aliasing issuesMike Frysinger2009-02-02-46/+34
| | | | | | | | Redo how pointers are managed to get rid of ugly casts and strict pointer aliasing issues that are highlighted by gcc 4.3. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMIIMike Frysinger2009-02-02-2/+2
| | | | | | | | No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that does exactly the same thing as common "CONFIG_RMII". Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: use common debug()Mike Frysinger2009-02-02-11/+3
| | | | | | | Rather then defining our own DEBUGF(), just use the common debug(). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}Mike Frysinger2009-02-02-5/+11
| | | | | | | | Rather than having the on-chip MAC hardcoded to phy address 1 and a speed of 2.5mhz, use these as defaults if the board doesn't specify otherwise. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: cleanup MII/PHY functionsMike Frysinger2009-02-02-175/+134
| | | | | | | | Cleanup and rewrite the MII/PHY related functions so that we can reuse the existing common linux/miiphy.h code and hook into the `mii` command. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Blackfin: bfin_mac: set MDCDIV based on SCLKMike Frysinger2009-02-02-5/+5
| | | | | | | | Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK), use the real algorithm so it gets set correctly regardless of SCLK. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-02-01-173/+310
|\
| * AVR32: macb - Search for PHY idGunnar Rangoy2009-01-28-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for searching through available PHY-addresses in the macb-driver. This is needed for the ATEVK1100 evaluation board, where the PHY-address will be initialized to either 1 or 7. This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when enabled tells the driver to search for the PHY address. Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com> Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com> Signed-off-by: Olav Morken <olavmrk@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * Marvell 88E1118 interrupt fixRon Madrid2009-01-28-0/+4
| | | | | | | | | | | | | | | | This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: smc911x.c: Add LAN9211 to chip_ids[] arrayStefan Roese2009-01-28-0/+2
| | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: Sort Makefile labelsMichal Simek2009-01-28-2/+2
| | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * sh: sh_eth: Change new network APINobuhiro Iwamatsu2009-01-24-134/+231
| | | | | | | | | | | | | | sh_eth used old network API. This patch changed new API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: smc911x: Make register read/write functions weakStefan Roese2009-01-24-37/+40
| | | | | | | | | | | | | | | | | | | | | | This patch changes the reg_read/_write to smc911x_reg_read/_write and defines then as weak so that they can be overridden by board specific version. This will be used by the upcoming VCTH board support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Blackfin: bfin_mac: update port muxingMike Frysinger2009-01-28-12/+35
| | | | | | | | | | | | Adds support more Blackfin parts and fixes broken muxing for older ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | drivers/net/e1000.c: missing terminator for supported devicesStefan Althoefer2009-01-27-0/+1
|/ | | | Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
* net: tsec: Fix Marvell 88E1121R phy initAnatolij Gustschin2008-12-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to ensure that phy interrupt pin won't be asserted after booting. We experienced following issues with current 88E1121R phy init: Marvell 88E1121R phy can be hardware-configured to share MDC/MDIO and interrupt pins for both ports P0 and P1 (e.g. as configured on socrates board). Port 0 interrupt pin will be shared by both ports in such configuration. After booting Linux and configuring eth0 interface, port 0 phy interrupts are enabled. After rebooting without proper eth0 interface shutdown port 0 phy interrupts remain enabled so any change on port 0 (link status, etc.) cause assertion of the interrupt. Now booting Linux and configuring eth1 interface will cause permanent phy interrupt storm as the registered phy 1 interrupt handler doesn't acknowledge phy 0 interrupts. This of course should be fixed in Linux driver too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* ColdFire: Add mii driver in drivers/netTsiChung Liew2008-11-09-17/+326
| | | | | | | All CF platforms' mii.c are consolidated into one Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved PPC4xx EMAC driver to drivers/netBen Warren2008-11-09-0/+2127
| | | | | | | Also changed path in all linker scripts that reference this driver Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
* xilinx_emaclite buffer overrunClive Stubbings2008-11-09-1/+1
| | | | | | | | | Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and PKTSIZE_ALIGN bytes long. Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Cleanup: fix "MHz" spellingWolfgang Denk2008-10-21-4/+4
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge 'next' branchWolfgang Denk2008-10-18-143/+143
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-143/+143
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3v2008.10-rc3Wolfgang Denk2008-10-15-1/+1
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* AX88180: new gigabit network driverLouis Su2008-10-13-0/+1140
| | | | | Signed-off-by: Louis Su <louis@asix.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* enable 10/100M at VSC8601 at tsec driverAndre Schwarz2008-10-13-0/+2
| | | | | | | | | Currently VSC8601 doesn't link with 10/100M partners if the EEPROM/Strapping is not set up. Setting the auto-neg register fixes this. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: ne2000: Divided a function of NE2000 driverNobuhiro Iwamatsu2008-10-13-723/+797
| | | | | | | | | | | get_prom function was used __attriute__ , but it is not enable. ax88796.o does not do link besides ne2000.o. When ld is carried out, get_prom function of ax88796.c is ignored. This problem is a thing by specifications of ld. I checked and test this patch on SuperH and MIPS. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Support for multiple SGMII/TBI interfaces for TSEC ethernetPeter Tyser2008-09-16-3/+5
| | | | | | | | | Fix TBI PHY accesses to use the proper offset in CPU register space. The previous code would incorrectly access the TBI PHY by reading/writing to CPU register space at the same location as would be used to access external PHYs. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2008-09-12-1/+1
|\
| * rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHEREJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5sWolfgang Denk2008-09-12-1/+1
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* net: smc911x: Add pkt_data_pull and pkt_data_push functionNobuhiro Iwamatsu2008-09-02-2/+7
| | | | | | | | | | | | The RSK7203 board has the SMSC9118 wired up 'incorrectly'. Byte-swapping is necessary, and so poor performance is inevitable. This problem cannot evade by the swap function of CHIP, this can evade by software Byte-swapping. And this has problem by FIFO access only. pkt_data_pull/pkt_data_push functions necessary to solve this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of EEPRO100 Ethernet controller to board_eth_init()Ben Warren2008-09-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Affected boards: db64360 db64460 katmai taihu taishan yucca cpc45 cpu87 eXalion elppc debris kvme080 mpc8315erdb integratorap ixdp425 oxc pm826 pm828 pm854 pm856 ppmc7xx sc3 sc520_spunk sorcery tqm8272 tqm85xx utx8245 Removed initialization of the driver from net/eth.c Also, wrapped contents of pci_eth_init() by CONFIG_PCI. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of TULIP Ethernet controller to board_eth_init()Ben Warren2008-09-02-0/+1
| | | | | | | | | | | | | | | | | | | Affected boards: cu824 bab7xx adciop dasa_sim mousse mpc8540eval musenki mvblue pcippc2/pcippc6 sbc8240 stxssa Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of E1000 Ethernet controller to board_eth_init()Ben Warren2008-09-02-1/+2
| | | | | | | | | | | Affected boards: ap1000 mvbc_p PM854 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of plb2800 Ethernet driver to board_eth_initBen Warren2008-09-02-2/+3
| | | | | | | | | Affected boards: purple Removed initialization of controller from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directoryBen Warren2008-09-02-0/+1
| | | | | | | | | | | | | | | | | | Modified board_eth_init() functions of boards that have this FEC in addition to other Ethernet controllers. Affected boards: bc3450 icecube mvbc_p o2dnt pm520 total5200 tq5200 Removed initialization of controller from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of MPC512x_FEC Ethernet driver to CPU directoryBen Warren2008-09-02-0/+1
| | | | | | | Added a cpu_eth_init() function to MPC512x CPU directory and removed code from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of IncaIP Ethernet controller to board_eth_initBen Warren2008-09-02-1/+2
| | | | | | | | | Affected boards: IncaIP Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of PCNET Ethernet controller to board_eth_init()Ben Warren2008-09-02-0/+1
| | | | | | | | | | Affected boards: PN62 sc520_cdp Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit v1.1 at 2024-12-27 16:04:44 +0000