summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* powerpc/85xx: add T4080 SoC supportShengzhou Liu2014-05-13-0/+1
| | | | | | | | The T4080 SoC is a low-power version of the T4160. T4080 combines 4 dual-threaded Power Architecture e6500 cores with single cluster and two memory complexes. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/fman/memac: use default MDIO_HOLD valueShaohui Xie2014-05-13-6/+2
| | | | | | | | Current driver uses a Maximum value for MDIO_HOLD when doing 10G MDIO access, this is due to an errata A-006260 on T4 rev1.0 which is fixed on rev2.0, so remove the maximum value to use the default value for rev2.0. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* net/designware: call phy_connect_dev() to properly setup phylib deviceIan Campbell2014-05-12-0/+2
| | | | | | | | | | | This sets up the linkage from the phydev back to the ethernet device. This symptom of not doing this which I noticed was: <NULL> Waiting for PHY auto negotiation to complete.... rather than: dwmac.1c50000 Waiting for PHY auto negotiation to complete.... Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* net: rename and refactor eth_rand_ethaddr() functionMasahiro Yamada2014-05-12-2/+2
| | | | | | | | | | | | | | | | | | | | Some functions in include/net.h are ported from include/linux/etherdevice.h of Linux Kernel. For ex. is_zero_ether_addr() is_multicast_ether_addr() is_broadcast_ether_addr() is_valid_ether_addr(); So, we should use the same function name as that of Linux Kernel, eth_rand_addr(), for consistency. Besides, eth_rand_addr() has been implemented as an inline function. So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net/phy: enable get_phy_id redefinableShengzhou Liu2014-05-12-1/+2
| | | | | | | | | As some PHYs have non-standard PHY ID registers, PHY Id can't be read correctly by current get_phy_id function, so we enable get_phy_id redefinable to permit specific PHY driver having own specific get_phy_id function. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* AR8035/phy: Enable autonegotiation function for ar8035Xiaobo Xie2014-05-12-3/+1
| | | | | | | | | Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before, but used "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8035 to enable autonegotiation. Then removed the genphy_config_aneg() function. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
* Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-866/+88
|\ | | | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * net: zynq: Fix sparse warnings in gemMichal Simek2014-05-06-0/+1
| | | | | | | | | | | | | | | | | | | | Add missing header. Warnings: drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static? drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * net: zynq: Use predefined macros instead of hardcoded valueMichal Simek2014-05-06-1/+2
| | | | | | | | | | | | MII is used by this driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-04-25-8/+20
| |\
| | * ar8031: modify the config func of ar8031 to ar8021_configZhao Qiang2014-04-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | ar8031 has the same config steps with ar8021, so change its config func to ar8021_config instead of genphy_config. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * driver/net/fm/memac_phy: Initialize mdio_clock for SoCs wih FMANv3Priyanka Jain2014-04-22-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MDIO clock needs to be initialized in u-boot code for SoCs having FMAN-v3(v3H or v3L) controller due to below reasons -On SoCs that have FMAN-v3H like B4860, default value of MDIO_CLK_DIV bits in mdio_stat(mdio_cfg) register generates mdio clock too high (much higher than 2.5MHz), violating the IEEE specs. -On SOCs that have FMAN-v3L like T1040, default value of MDIO_CLK_DIV bits is zero, so MDIO clock is disabled. So, for proper functioninig of MDIO, MDIO_CLK_DIV bits needs to be properly initialized. Also this type of initialization is generally done in PBI(pre-bootloader) phase using rcw.But for chips like T1040 which support deep-sleep, such type of initialization cannot be done in PBI phase due to the limitation that during deep-sleep resume, FMAN (MDIO) registers are not accessible in PBI phase. So, mdio clock initailization must be done as part of u-boot. This initialization code is implemented in memac_phy.c which gets compiled only for SoCs having FMANv3, so no extra compilation flag is required. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * net/phy: Fix PHY id for VSC8514Codrin Ciubotariu2014-04-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current Datasheet for VSC8514 there is a mistake, saying that the PHY id is 0x70570. The real value in the identifier registers is 0x70670. Linux PHY driver uses 0x70670 also. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Cc: York Sun <yorksun@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and ↵Zhao Qiang2014-04-22-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_QE_FW_ADDR CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address. Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address, and CONFIG_SYS_QE_FW_ADDR for QE microcode address. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | MIPS: drop incaip boardDaniel Schwierzeck2014-04-20-794/+0
| |/ | | | | | | | | | | | | | | | | This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
| * e1000: remove redundant assignmentDavid Müller (ELSOFT AG)2014-04-18-1/+0
| | | | | | | | | | Signed-off-by: David Mueller <d.mueller@elsoft.ch> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * pcnet: force ordering of descriptor accessesPaul Burton2014-04-18-18/+19
| | | | | | | | | | | | | | | | | | | | | | The ordering of accesses to the rx & tx descriptors is important, yet the send & recv functions accessed them via regular structure accesses. This leaves the compiler with the opportunity to reorder those accesses or to hoist them outside of loops. Prevent that from happening by using readl & writel to access the descriptors. As a nice bonus, this removes the need for the driver to care about endianness. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * pcnet: align rx buffers for cache invalidationPaul Burton2014-04-18-9/+12
| | | | | | | | | | | | | | | | | | | | The RX buffers are invalidated when a packet is received, however they were not suitably cache-line aligned. Allocate them seperately to the pcnet_priv structure and align to ARCH_DMA_MINALIGN in order to ensure suitable alignment for the cache invalidation, preventing anything else being placed in the same lines & lost. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * pcnet: access descriptor rings & init block uncachedPaul Burton2014-04-18-31/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prior accesses to the descriptor rings & init block via cached memory had a few issues: - The memory needs cache flushes or invalidation at the appropriate times, but was not necessarily aligned on cache line boundaries. This could lead to data being incorrectly lost or written back to RAM at the wrong time. - There are points where ordering of writes to the memory is important, but because it's cached memory the pcnet controller would see cache lines written back ordered by address. This could occasionally lead to hardware seeing descriptors in an incorrect state. - Flushing the cache constantly is inefficient. So, to avoid all of those issues simply access the descriptors & init block via uncached memory. The MIPS-specific UNCACHED_SDRAM macro is used to do this (retrieving an address in kseg1) as I could see no existing generic solution. Since the MIPS Malta board is the only user of the pcnet driver, hopefully this doesn't matter. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * arm: remove lubbock board supportMasahiro Yamada2014-04-18-6/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/lubbock/* - Remove include/configs/lubbock.h - Cleanup defined(CONFIG_LUBBOCK) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | keystone2: net: add keystone ethernet driverKaricheri, Muralidharan2014-04-17-0/+717
|/ | | | | | | | | | | | Ethernet driver configures the CPSW, SGMI and Phy and uses the the Navigator APIs. The driver supports 4 Ethernet ports and can work with only one port at a time. Port configurations are defined in board.c. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-1/+1
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * net/designware: align DMA buffer descriptors to D$ lineAlexey Brodkin2014-03-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's important to have ability to flush/invalidate each DMA buffer descriptor individually to prevent incoherency of adjacent BDs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Amit Virdi <amit.virdi@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com>
* | drivers: net: cpsw: init phy with gigabit featuresIlya Ledvich2014-03-12-5/+1
|/ | | | | | | | CPSW ia a gigabit device. Use the PHY_GBIT_FEATURES macro to determine phy supported features. Tested on cm_t335. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-03-10-2/+2
|\
| * drivers: net: cpsw: add support to have phy address from cpsw platform dataMugunthan V N2014-03-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Some platforms like AM437x have different EVMs with different phy addresses, so this patch adds support for passing phy address via cpsw plaform data. Also renamed phy_id to phy_addr so better understanding of the code. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> [trini: Update BuR am335x_igep0033 pcm051_rev3 pcm051_rev1 cm_t335 pengwyn boards] Signed-off-by: Tom Rini <trini@ti.com>
* | net/phy: Correct AR8021 phy_maskHaijun.Zhang2014-03-07-1/+1
| | | | | | | | | | | | | | | | There was wrong phy_mask for AR8021 device, so the AR8021 can't be probed correctly. Changed it from 0x4fffff to 0x4ffff0. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
* | net: gem: Add OF initialization supportMichal Simek2014-03-04-0/+42
| | | | | | | | | | | | Gem can be directly initialized from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: emaclite: Fix OF initializationMichal Simek2014-03-04-8/+9
|/ | | | | | | | - Add xilinx_emaclite_of_init to netdev.h - Remove global data pointer from the driver - Add better handling for error state. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-02-25-0/+1
|\ | | | | | | | | | | | | With this, fixup a trivial build error of get_effective_memsize needing to be updated in the new board/freescale/p1010rdb/spl.c Signed-off-by: Tom Rini <trini@ti.com>
| * ar8031/8033/phy:enable autonegotiation for ar8031/8033Zhao Qiang2014-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before while "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8031/8033 to enable autonegotiation. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | SMC91111: Fix compilation warningsBhupesh Sharma2014-02-21-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following warning messages coming out of 'drivers/net/smc91111.h' when compiled for 'vexpress_aemv8a': warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Currently this issue seems to surface when SMSC is compiled for 64-bit ARMv8 platforms, so the change is protected under CONFIG_ARM64, so that it doesn't break other existing platforms. In addition this patch tries to fix some checkpatch errors and warnings (others related to camel-casing and volatile usage will be addressed by a later patch). This fix has been tested on both ARMv8 foundation model v1 and v2. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-20-65947/+17
|\ \
| * \ Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-20-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Makefile drivers/net/npe/Makefile These two conflicts arise from commit 0b2d3f20 ("ARM: NET: Remove the IXP NPE ethernet driver") and are resolved by deleting the drivers/net/npe/Makefile file and removing the CONFIG_IXP4XX_NPE line from Makefile.
| * \ \ Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-19-2/+6
| |\ \ \
| | * \ \ Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-02-11-167/+9
| | |\ \ \
| | * | | | NET: fec_mxc: fix MDIO clock prescaler calculationMarkus Niebel2014-02-11-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prescaler value for MDC is calculated wrong for MX6S. Implement the same logic as linux here which handles ENET_MAC different then original FEC. Tested on a custom board with i.MX6S and 100MBit PHY Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
| * | | | | net: zynq_gem: Calculate clock dividers dynamicallySoren Brinkmann2014-02-19-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove hard coded clock divider setting and use the Zynq clock framework to dynamically calculate appropriate dividers at run time. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | net: zynq_gem: Move RCLK details out of driverSoren Brinkmann2014-02-19-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GEM driver should not need to know about Zynq specific details of RCLK related registers and bitfields in the SLCR. Move those details to the slcr driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-19-65938/+0
| |\ \ \ \ \ | | |_|_|_|/ | |/| | | |
| | * | | | ARM: NET: Remove the IXP NPE ethernet driverMarek Vasut2014-02-06-65938/+0
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
* | | | | blackfin: Add <asm/clock.h> to numerous driversTom Rini2014-02-20-0/+1
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Tom Rini <trini@ti.com>
* | | | kbuild: use Linux Kernel build scriptsMasahiro Yamada2014-02-19-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
* | | | net, phy: atheros ar803x bugHeiko Schocher2014-02-19-1/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 626ee1e3 "phylib: update atheros ar803x phy" leads in failing ethernet on the pxm2 board. Calling genphy_config() instead of ar8021_config(), which seems for ar8021 phys not ar803x phys, make it working again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* | | net/designware: make driver compatible with data cacheAlexey Brodkin2014-02-07-3/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up until now this driver only worked with data cache disabled. To make it work with enabled data cache following changes were required: * Flush Tx/Rx buffer descriptors their modification * Invalidate Tx/Rx buffer descriptors before reading its values * Flush cache for data passed from CPU to GMAC * Invalidate cache for data passed from GMAC to CPU Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Amit Virdi <amit.virdi@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | net/designware - switch driver to phylib usageAlexey Brodkin2014-02-07-327/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this change driver will benefit from existing phylib and thus custom phy functionality implemented in the driver will go away: * Instantiation of the driver is now much shorter - 2 parameters instead of 4. * Simplified phy management/functoinality in driver is replaced with rich functionality of phylib. * Support of custom phy initialization is now done with existing "board_phy_config". Note that after this change some previously used config options (driver-specific PHY configuration) will be obsolete and they are simply substituted with similar options of phylib. For example: * CONFIG_DW_AUTONEG - no need in this one. Autonegotiation is enabled by default. * CONFIG_DW_SEARCH_PHY - if one wants to specify attached phy explicitly CONFIG_PHY_ADDR board config option has to be used, otherwise automatically the first discovered on MDIO bus phy will be used I believe there's no need now in "doc/README.designware_eth" because user only needs to instantiate the driver with "designware_initialize" whose prototype exists in "include/netdev.h". Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Amit Virdi <amit.virdi@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | net/designware: add explicit reset of {tx|rx}_currdescnumAlexey Brodkin2014-02-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver "init" function might be called multiple times. On every "init" Tx/Rx buffer descriptors are initialized: "descs_init" -> "{tx|rx}_descs_init". In its turn those init functions set MAC's "{tx|rx}desclistaddr" to point on the first buffer descriptor in the list. So CPU to start operation from the first buffer descriptor as well after every "init" we have to reset "{tx|rx}_currdescnum". Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | blackfin: Initialize the EMAC VLAN with proper default valueAaron Wu2014-02-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | EMAC_VLANx regs is not properly initiallized in u-boot, once it's overwrite in the kernel when DSA enabled, hot reset will lead to bringing up EMAC fail in u-boot. Signed-off-by: Aaron Wu <Aaron.Wu@analog.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | | Merge branch 'net' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-02-04-0/+9
|\ \ \
| * | | net: axi_emac: Check if phy was correctly detectedMichal Simek2014-02-04-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As tsec and fm drivers checking phydev->link ensure that u-boot don't try access device if link is not ready. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-09-19 08:38:27 +0000