summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* powerpc: manroland: remove uc100, uc101, mucmc52, hmi1001 supportMasahiro Yamada2015-01-05-5/+0
| | | | | | | | These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de>
* net: rtl8169: Add support for RTL-8168/8111gThierry Reding2014-12-18-0/+1
| | | | | | | | This network interface card is found on the NVIDIA Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: rtl8169: Use non-cached memory if availableThierry Reding2014-12-18-11/+60
| | | | | | | | | | To work around potential issues with explicit cache maintenance of the RX and TX descriptor rings, allocate them from a pool of uncached memory if the architecture supports it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: rtl8169: Properly align buffersThierry Reding2014-12-18-29/+34
| | | | | | | | | | | | | | | | RX and TX descriptor rings should be aligned to 256 byte boundaries. Use the DEFINE_ALIGN_BUFFER() macro to define the buffers so that they don't have to be manually aligned later on. Also make sure that the buffers do align to cache-line boundaries in case the cache-line is higher than the 256 byte alignment requirements of the NIC. Also add a warning if the cache-line size is larger than the descriptor size, because the driver may discard changes to descriptors made by the hardware when requeuing RX buffers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFERThierry Reding2014-12-18-1/+5
| | | | | | | | | | According to the top-level README file, this configuration setting can be used to override the number of receive buffers that an ethernet NIC uses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net/fm: update ft_fixup_port to differentiate dual-role macShengzhou Liu2014-12-15-5/+16
| | | | | | | | | | we need to differentiate dual-role MACs into two types: MACs with 10GEC enumeration consistent with DTSEC enumeration(defined by CONFIG_FSL_FM_10GEC_REGULAR_NOTATION) and other MACs without CONFIG_FSL_FM_10GEC_REGULAR_NOTATION defined. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/phy: enable serdes auto-negotiation for vsc8514 phyShengzhou Liu2014-12-05-2/+11
| | | | | | | | VSC8514 QSGMII PHY requires enabling auto-negotiation, otherwise it wouldn't work. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/fman: update 10GEC to fit new SoCShengzhou Liu2014-12-05-2/+7
| | | | | | | | | | | | | | | fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Add T1024/T1023 SoC supportShengzhou Liu2014-12-05-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfigSuresh Gupta2014-12-05-2/+62
| | | | | | | | | | | | In B4860QDS board SerDes2 lanes EFGH either go to SFP or AMC riser card slot2 so either DTSEC3/DTSEC4 or TGEC1/TGEC2 should be accessible. This Patch enables DTSEC3/DTSEC4 or TGEC1/TGEC2 on bases of user specified string fsl_b4860_serdes2:sfp_amc=amc or fsl_b4860_serdes2:sfp_amc=sfp respectively in hwconfig. Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/b4860qds: add xfi supportShaohui Xie2014-12-05-1/+3
| | | | | | | | | | We need following changes to make xfi work on B4: 1. set cross-point switch VSC3308 to use sfp config when running xfi; 2. add 10G interface check for xfi; 3. set phy address for xfi so the 10G ports can be registered by mdio; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/phy: Add support for CS4315/CS4340 PHYShengzhou Liu2014-12-05-0/+337
| | | | | | | | | | | | Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Freescale t104x: Do not exclude SGMIIJoakim Tjernlund2014-12-05-4/+0
| | | | | | | | | | | | fman_port_enet_if() tests if FM1_DTSEC2 or FM1_DTSEC4 uses RGMII or MII and if not returns PHY_INTERFACE_MODE_NONE. This excludes testing for SGMII further down. Remove the unconditional "else return PHY_INTERFACE_MODE_NONE" so SGMII can be tested too. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-11-26-4/+12
|\ | | | | | | | | | | | | Conflicts: drivers/mmc/fsl_esdhc.c Signed-off-by: Tom Rini <trini@ti.com>
| * net/fm: add 2.5G SGMII supportShengzhou Liu2014-11-19-4/+12
| | | | | | | | | | | | | | | | | | | | As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-23-1/+1
|/ | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* net: macb: enable GMAC IP without GE feature supportBo Shen2014-11-17-1/+7
| | | | | | | | | | The User Register in GMAC IP is used to select interface type. When with GE feature, it is used to select interface between RGMII and GMII. If without GE feature, it is used to select interface between MII and RMII. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* net: macb: write mac address when initializationBo Shen2014-11-17-0/+9
| | | | | | | | | | | | | | | | | When boot up without mac address setting, it will give the warning message like: "Warning: failed to set MAC address", however when execute network related command, it still execute them without any warning information. With this patch, it will exit directly with following information: "gmac0: mac address is not valid" It also solve the problem after bootup then set mac address and the mac address won't set to net device issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* driver/net/fm/memac_phy: set NEG bit for external MDIOsShaohui Xie2014-11-14-1/+4
| | | | | | | | | | NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure on XAUI PHY, so set this bit definitely to align with the RM. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Fman/mEMAC: mEMAC fix for 10G MAC and PHYShaohui Xie2014-11-14-3/+11
| | | | | | | | | | | | 1. use Payload length check disable when enable MAC; 2. add XGMII support for setting MAC interface mode; 3. only enable auto negotiation for Non-XGMII mode; 4. return 0xffff if clause 22 is used to read 10G phy_id; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-By: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/uli526x.c: fix syntax errorWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | Fix error detected by cppcheck: [drivers/net/uli526x.c:551]: (error) printf format string requires 3 parameters but only 2 are given. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Roy Zang <tie-fei.zang@freescale.com>
* net: smc911x: Keep MAC programmedMarek Vasut2014-11-07-0/+1
| | | | | | | | | | Make sure to keep the MAC address programmed in the SMC911x ADDRH and ADDRL registers. Linux can read those registers to determine the MAC address on EEPROM-less configurations. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Tom Rini <trini@ti.com>
* net: phy: marvell: add errata w/a for 88E151* chipsHao Zhang2014-11-06-1/+52
| | | | | | | | | | | As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514 Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires that certain registers get written in order to restart autonegotiation. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* net: keystone_net: add Keystone2 K2L SoC supportKhoronzhuk, Ivan2014-11-05-1/+4
| | | | | | | | The Keystone2 Lamar SoC uses the same keystone net driver. This patch adds opportunity to use it by K2L SoCs. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* net: keystone_serdes: add keystone K2L SoC supportKhoronzhuk, Ivan2014-11-05-1/+1
| | | | | | | | | Keystone2 Lamar SoC uses the same keystone SerDes driver. All Keystone2 EVM boards currently use SerDes driver, so move CONFIG_TI_KEYSTONE_SERDES to common configuration file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* net: sh-eth: Add cache writeback control after setting bit of DMA descriptorNobuhiro Iwamatsu2014-11-04-2/+8
| | | | | | | | A bit field of DMA descriptor is on memory area of DMA. If we set data to bit of DMA descriptor, we must be writeback data of DMA descriptor. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: sh-eth: Use memalign instead of orignal memroy alignment functionNobuhiro Iwamatsu2014-11-04-48/+41
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: sh-eth: Remove definition of RX_DESC_SIZE and TX_DESC_SIZENobuhiro Iwamatsu2014-11-04-12/+12
| | | | | | | | RX_DESC_SIZE and TX_DESC_SIZE mean the size of the data descriptor for sh-eth. We can acquire this in sizeof. It is not necessary to define these in define. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: sh-eth: Add support R8A7793Nobuhiro Iwamatsu2014-11-04-4/+5
| | | | | | | | R8A7793 has the same sh-ether IP core as other SH/rmobile. This patch adds support of R8A7793. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* e1000: add i211 and unprogrammed i210/i211 supportMarcel Ziswiler2014-10-28-0/+6
| | | | | | | This patch adds support for i211 as well as unprogrammed aka tools only i210/i211 chip support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* e1000: fix sw fw sync on igb i210/i211Marcel Ziswiler2014-10-27-2/+5
| | | | | | | | | I finally had a look at the datasheet and spotted an additional register address difference between regular E1000 and i210/i211 chips. This patch fixes this and now successfully works on programmed i210/i211 as well as unprogrammed i211. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* net/e1000: Fix EEPROM access errorYork Sun2014-10-27-1/+1
| | | | | | | | | | | | Commit 951860634fdb557bbb58e0f99215391bc0c29779 may have changed the logic unintentially from "if (!(swfw_sync & (fwmask | swmask)))" to "if ((swfw_sync & swmask) && !(swfw_sync & fwmask))". This change breaks some e1000 NIC with a message "ERROR: Unable to read EEPROM!". Signed-off-by: York Sun <yorksun@freescale.com> CC: Marek Vasut <marex@denx.de> CC: Tim Harvey <tharvey@gateworks.com> Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini2014-10-27-1/+1
|\
| * PowerPC: drop some 74xx_7xx boards and related codeWolfgang Denk2014-10-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The file board/Marvell/include/mv_gen_reg.h is incompatible with the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL" clause). As this cannot be fixed, we remove the file and all code that depends on it. Fortunately this only affects some very old boards that have long reached EOL: CPCI750 DB64360 DB64460 p3m750 p3m7448 Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-10-27-268/+150
|\ \ | |/ |/|
| * net: keystone_net: increase PHY auto negotiate timeKhoronzhuk, Ivan2014-10-23-5/+31
| | | | | | | | | | | | | | | | | | | | | | The new Marvel PHY (88E1514) used on K2L/K2E EVM requires longer time to auto negotiate with SoC's SGMII port. It can take about 3 sec to up the PHY after reset, so add code to expose sgmii auto negotiation waiting process. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: add Keystone2 K2E SoC supportKhoronzhuk, Ivan2014-10-23-0/+5
| | | | | | | | | | | | | | | | | | The Keystone2 Edison SoC uses the same keystone net driver. This patch adds opportunity to use it by K2E SoCs. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_serdes: add keystone K2E SoC supportKhoronzhuk, Ivan2014-10-23-0/+6
| | | | | | | | | | | | | | | | | | Keystone2 Edison SoC uses the same keystone SerDes driver. This patch adds support for K2E SoCs. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: use general get link functionKhoronzhuk, Ivan2014-10-23-45/+5
| | | | | | | | | | | | | | | | | | | | | | | | The phy framework has function to get link, so use it instead of own implementation. There is no reason to check SGMII link while sending each packet, phy link is enough. Check SGMII link only while ethernet open. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: register eth PHYs on MDIO busKhoronzhuk, Ivan2014-10-23-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As MDIO bus has been added we can register PHYs with it. After registration, the PHY driver will be probed according to the hardware on board. Startup PHY at the ethernet open. Use phy_startup() instead of keystone_get_link_status() when eth open, as it verifies PHY link inside and SGMII link is checked before. For K2HK evm PHY configuration at init was absent, so don't enable phy config at init for k2hk evm. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: register MDIO busKhoronzhuk, Ivan2014-10-23-38/+55
| | | | | | | | | | | | | | | | | | | | | | | | Currently MDIO framework is not used to configure Ethernet PHY. As result some of already implemented functions are duplicated. So register MDIO bus in order to use it. On that stage it's just registered, it'll be used as we start to use PHY framework. Use mdio bus read/write/reset functions in the driver. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: use mdio_reset functionKhoronzhuk, Ivan2014-10-23-14/+2
| | | | | | | | | | | | | | | | Don't use mdio_enable twice while eth open. Also rename it to keystone2_mdio_reset as more appropriate name. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: phy: print a number of phy that is not foundKhoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | In case when several Ethernet ports are supported it's convenient to see the number of phy that is not found. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * soc: keystone_serdes: generalize to be used by other sub systemsHao Zhang2014-10-23-1/+14
| | | | | | | | | | | | | | | | | | | | SerDes driver is used by other sub systems like PCI, sRIO etc. So modify it to be more general. The SerDes driver provides common API's that can also be extended for other peripherals SerDes configurations. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * soc: keystone_serdes: create a separate SGMII SerDes driverKhoronzhuk, Ivan2014-10-23-138/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch split the Keystone II SGMII SerDes related code from Ethernet driver and create a separate SGMII SerDes driver. The SerDes driver can be used by others keystone subsystems like PCI, sRIO, so move it to driver/soc/keystone directory. Add soc specific drivers directory like in the Linux kernel. It is going to be used by keysotone soc specific drivers. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: remove redundant code from keystone_net.cKhoronzhuk, Ivan2014-10-23-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused tx_send_loop variable. Removes duplicated get_link_status() call from the keystone2_eth_send_packet(). The emac_gigabit_enable() is called at opening Ethernet and there is no need to enable it on sending each packet. So remove that call from keystone2_eth_send_packet() as well. The calling of power/clock up functions are mostly the responsibility of SoC/board code, so move these functions to appropriate place. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: move header file from arch to ti-commonKhoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | | | | | The header file for the driver should be in correct place. So move it to "arch/arm/include/asm/ti-common/keystone_net.h" and correct driver's external dependencies. At the same time align and correct some definitions. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_net: remove SoC specific emac_regs structureHao Zhang2014-10-23-5/+3
| | | | | | | | | | | | | | | | | | | | This patch removes K2HK SOC specifc emac_regs structure, it uses soc specific register offset to keep the network driver common across all the Keystone II EVMs. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * dma: keystone_nav: generalize driver usageKhoronzhuk, Ivan2014-10-23-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The keystone_nav driver is general driver intended to be used for working with queue manager and pktdma for different IPs like NETCP, AIF, FFTC, etc. So the it's API shouldn't be named like it works only with one of them, it should be general names. The names with prefix like netcp_* rather do for drivers/net/keystone_net.c driver. So it's good to generalize this driver to be used for different IP's and delete confusion with real NETCP driver. The current netcp_* functions of keystone navigator can be used for other settings of pktdma, not only for NETCP. The API of this driver is used by the keystone_net driver to work with NETCP, so net driver also should be corrected. For convenience collect pkdma configurations in drivers/dma/keystone_nav_cfg.c. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * dma: keystone_nav: move keystone_nav driver to driver/dma/Khoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The keystone_nav is used by drivers/net/keystone_net.c driver to send and receive packets, but currently it's placed at keystone arch sources. So it should be in the drivers directory also. It's separate driver that can be used for sending and receiving pktdma packets by others drivers also. This patch just move this driver to appropriate directory and doesn't add any functional changes. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
generated by cgit v1.1 at 2024-11-02 16:38:07 +0000