summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeLines
* fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speedZang Roy-R619112013-05-02-0/+17
| | | | | | | | | | Some legacy RGMII phys don't have in band signaling for the speed information. so set the RGMII MAC mode according to the speed got from PHY. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reported-by: John Traill <john.traill@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Consolidate bool typeYork Sun2013-04-01-490/+458
| | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* am33xx: Add required includes to some omap/am33xx codeTom Rini2013-03-24-0/+1
| | | | | | | | | | | | | - In arch/arm/cpu/armv7/omap-common/timer.c, drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files that the driver needs but had been relying on <config.h> to bring in. - In arch/arm/cpu/armv7/omap-common/lowlevel_init.S add <config.h> - In am335x_evm.h and pcm051.h don't globally include <asm/arch/hardware.h> and <asm/arch/cpu.h> but just <asm/arch/omap.h> as that is the only include which defines things the config uses. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Tom Rini <trini@ti.com>
* Merge u-boot/master into u-boot-ti/masterTom Rini2013-03-11-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
| * net: Use new numeric setenv functionsSimon Glass2013-02-28-3/+1
| | | | | | | | | | | | Use setenv_ulong(), setenv_hex() and setenv_addr() in net/ Signed-off-by: Simon Glass <sjg@chromium.org>
* | am335x: cpsw: optimize cpsw_send to increase network performanceMugunthan V N2013-03-11-2/+18
|/ | | | | | | | | | Before submitting packets to cpdma, phy status is updated on every packet which leads to delay in packet send intern reduces the Ethernet performance. Checking mdio status for each packet will reduce timetaken to send a packet and there by increasing the Ethernet performance. With this the performance is increased from 208KiB/s to 375KiB/s on EVMsk Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-12-125/+169
|\
| * net: fec_mxc: get phydev before fec_probeTroy Kisky2013-01-28-43/+76
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: only call phy_connect in fec_probeTroy Kisky2013-01-28-21/+12
| | | | | | | | | | | | | | This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: use fec_set_dev_name to set nameTroy Kisky2013-01-28-8/+8
| | | | | | | | | | | | | | This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * phy: add phy_find_by_mask/phy_connect_devTroy Kisky2013-01-28-50/+78
| | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to try a range of possible phy addresses to connect. Also, an ethernet device is not required to use phy_find_by_mask leading to better separation of mii vs ethernet, as suggested by Andy Fleming. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multiTroy Kisky2013-01-28-16/+8
| | | | | | | | | | | | | | Having only one call to fec_probe will ease the changing of its parameters. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: change fec_mii_setspeed parameterTroy Kisky2013-01-28-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Only the hardware ethernet registers are needed for this function, so don't pass the more general structure. I'm trying to separate MII and fec. This also fixes MX28 fec_mii_setspeed use on secondary ethernet port This was found by inspection of the code and should be checked on real hardware. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky2013-01-28-1/+1
| | | | | | | | | | | | | | It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | ppc: Move mpc512x clocks to arch_global_dataSimon Glass2013-02-04-1/+1
| | | | | | | | | | | | Move ips_clk and csb_clk into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | ppc: Move mpc5xxx clocks to arch_global_dataSimon Glass2013-02-04-3/+6
| | | | | | | | | | | | Move ipb_clk and pci_clk into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | powerpc/mpc85xx:Add support of B4420 SoCPoonam Aggrwal2013-01-30-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | B4420 is a reduced personality of B4860 with fewer core/clusters(both SC3900 and e6500), fewer DDR controllers, fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies. Key differences between B4860 and B4420 ---------------------------------------- B4420 has: 1. Fewer e6500 cores: 1 cluster with 2 e6500 cores 2. Fewer SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster. 3. Single DDRC 4. 2X 4 lane serdes 5. 3 SGMII interfaces 6. no sRIO 7. no 10G Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | powerpc/mpc85xx: Few updates for B4860 cpu changesPoonam Aggrwal2013-01-30-0/+79
|/ | | | | | | | | | | | | | | - Added some more serdes1 and serdes2 combinations serdes1= 0x2c, 0x2d, 0x2e serdes2= 0x7a, 0x8d, 0x98 - Updated Number of DDR controllers to 2. - Added FMAN file for B4860, drivers/net/fm/b4860.c Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mv88e61xx: refactor PHY and SWITCH level-codeAlbert ARIBAUD2013-01-09-192/+342
| | | | Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-08-1/+4
|\ | | | | | | | | This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
| * am335x: cpsw: make phy address configurableYegor Yefremov2012-12-10-1/+4
| | | | | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | net: sh_eth: add support for SH7752Yoshihiro Shimoda2012-12-15-4/+4
| | | | | | | | | | | | | | | | SH7752 has two fast ethernet controllers and two gigabit ethernet controllers. It is similar to SH7757. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | phy: Add support for Marvell 88E1118RMichal Simek2012-12-15-0/+11
| | | | | | | | | | | | | | | | | | Marvell 88E1118R has different uid then 88E1118. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Andy Fleming <afleming@freescale.com> CC: Zang Roy-R61911 <tie-fei.zang@freescale.com> CC: Kumar Gala <galak@kernel.crashing.org>
* | e1000e : Correct Rx Threshold granularityRuchika Gupta2012-12-15-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In e1000e driver, Rx descriptor queue is used such that hardware can add only one descriptor at a time. So the WTHRESH granularity in RXDCTL should be set to single descriptor. This would ensure that every time controller fills a Rx descriptor, it is flushed to host memory. Earlier this granularity was in cache line units i.e 2 descriptors. This leads to controller always waiting for 2 descriptors before flushing them out. But since not more than one Rx BD is actually available , the accumulation condition never gets hit. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Acked-by: Roy Zang <tie-fei.zang@freescale.com>
* | powerpc/85xx: add support for the Freescale P5040DS Superhydra reference boardTimur Tabi2012-11-27-0/+114
|/ | | | | | | | | The P5040DS reference board (a.k.a "Superhydra") is an enhanced version of P3041DS/P5020DS ("Hydra") reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* drivers/net/: sparse fixesKim Phillips2012-11-04-19/+21
| | | | | | | | | | | | | | | | | | | phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* net/: sparse fixesKim Phillips2012-11-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | bootp.c:44:14: warning: symbol 'dhcp_state' was not declared. Should it be static? bootp.c:45:15: warning: symbol 'dhcp_leasetime' was not declared. Should it be static? bootp.c:46:10: warning: symbol 'NetDHCPServerIP' was not declared. Should it be static? arp.c:30:17: warning: symbol 'NetArpWaitReplyIP' was not declared. Should it be static? arp.c:37:16: warning: symbol 'NetArpTxPacket' was not declared. Should it be static? arp.c:38:17: warning: symbol 'NetArpPacketBuf' was not declared. Should it be static? atheros.c:33:19: warning: symbol 'AR8021_driver' was not declared. Should it be static? net.c:183:7: warning: symbol 'PktBuf' was not declared. Should it be static? net.c:159:21: warning: symbol 'net_state' was not declared. Should it be static? ping.c:73:6: warning: symbol 'ping_start' was not declared. Should it be static? ping.c:82:13: warning: symbol 'ping_receive' was not declared. Should it be static? tftp.c:53:7: warning: symbol 'TftpRRQTimeoutMSecs' was not declared. Should it be static? tftp.c:54:5: warning: symbol 'TftpRRQTimeoutCountMax' was not declared. Should it be static? eth.c:125:19: warning: symbol 'eth_current' was not declared. Should it be static? Note: in the ping.c fix, commit a36b12f95a29647a06b5459198684fc142482020 "net: Move PING out of net.c" mistakenly carried the ifdef CMD_PING clause from when it was necessary to avoid warnings when it was embedded in net.c. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* include/linux/byteorder: import latest endian definitions from linuxKim Phillips2012-11-04-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot's byteorder headers did not contain endianness attributions for use with sparse, causing a lot of false positives. Import the kernel's latest definitions, and enable them by including compiler.h and types.h. They come with 'const' added for some swab functions, so fix those up, too: include/linux/byteorder/big_endian.h:46:2: warning: passing argument 1 of '__swab64p' discards 'const' qualifier from pointer target type [enabled by default] Also, note: u-boot's historic __BYTE_ORDER definition has been preserved (for the time being at least). We also remove ad-hoc barrier() definitions, since we're including compiler.h in files that hadn't in the past: macb.c:54:0: warning: "barrier" redefined [enabled by default] In addition, including compiler.h in byteorder changes the 'noinline' definition to expand to __attribute__((noinline)). This fixes arch/powerpc/lib/bootm.c: bootm.c:329:16: error: attribute '__attribute__': unknown attribute bootm.c:329:16: error: expected ')' before '__attribute__' bootm.c:329:25: error: expected identifier or '(' before ')' token powerpc sparse builds yield: include/common.h:356:22: error: marked inline, but without a definition the unknown-reason inlining without a definition is considered obsolete given it was part of the 2002 initial commit, and no arm version was 'fixed.' also fixed: ydirectenv.h:60:0: warning: "inline" redefined [enabled by default] and: Configuring for devconcenter - Board: intip, Options: DEVCONCENTER make[1]: *** [4xx_ibm_ddr2_autocalib.o] Error 1 make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2 powerpc-fsl-linux-size: './u-boot': No such file 4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration': include/asm/ppc4xx-sdram.h:1407:13: sorry, unimplemented: inlining failed in call to 'ppc4xx_ibm_ddr2_register_dump': function body not available 4xx_ibm_ddr2_autocalib.c:1243:32: sorry, unimplemented: called from here and: In file included from crc32.c:50:0: crc32table.h:4:1: warning: implicit declaration of function '___constant_swab32' [-Wimplicit-function-declaration] crc32table.h:4:1: error: initializer element is not constant crc32table.h:4:1: error: (near initialization for 'crc32table_le[0]') Signed-off-by: Kim Phillips <kim.phillips@freescale.com> [trini: Remove '#endif' in include/common.h around setenv portion] Signed-off-by: Tom Rini <trini@ti.com>
* arm: Remove support for NETARMMarek Vasut2012-10-26-395/+0
| | | | | | This stuff has been rotting in the tree for a while now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
* powerpc/fm: fix TBI PHY address settingsshaohui xie2012-10-22-2/+2
| | | | | | | | | | | | | | | | TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* fm/mEMAC: add mEMAC frame workRoy Zang2012-10-22-2/+323
| | | | | | | | | | | The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/mpc85xx: Add B4860 and variant SoCsYork Sun2012-10-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* powerpc/mpc85xx: Add T4240 SoCYork Sun2012-10-22-0/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* m68k: net: Fix unused variable in mcfmii.cMarek Vasut2012-10-19-3/+1
| | | | | | | | | | | The following warning was produced, fix it: mcfmii.c: In function 'mcffec_miiphy_write': mcfmii.c:318:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Signed-off-by: Marek Vasut <marex@denx.de> Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com> Cc: Jason Jin <jason.jin@freescale.com>
* ppc4xx: Remove AP1000 board supportStefan Roese2012-10-15-41/+1
| | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: James MacAulay <james.macaulay@amirix.com> Acked-by: Marek Vasut <marex@denx.de>
* da850/omap-l138: davinci_emac: Suppress auto negotiation if neededBastian Ruppert2012-10-01-1/+2
| | | | | | | | | | | | | | negotiation is enabled in RMII mode. Some boards based on da850 need to suppress this procedure. CC: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> CC: Lad, Prabhakar <prabhakar.lad@ti.com> CC: Hadli, Manjunath <manjunath.hadli@ti.com> CC: sbabic@denx.de Acked-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com> Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de> Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2012-09-27-59/+70445
|\
| * FEC: Replace magic contantsMarek Vasut2012-09-27-3/+6
| | | | | | | | | | | | | | | | | | | | Replace the magic contant 1 << 24 with properly defined bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * FEC: Rework the TX wait mechanismMarek Vasut2012-09-27-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mechanism waiting for transmission to finish in fec_send() now relies on the E-bit being cleared in the TX buffer descriptor. In case of data cache being on, this means invalidation of data cache above this TX buffer descriptor on each test for the E-bit being cleared. Apparently, there is another way to check if the transmission did complete. This is by checking the TDAR bit in the X_DES_ACTIVE register. Reading a register does not need any data cache invalidation, which is beneficial. Rework the sequence that wait for completion of the transmission so that the TDAR bit is tested first and afterwards check the E-bit being clear. This cuts down the number of cache invalidation calls to one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * FEC: Remove endless loop in the FEC driverMarek Vasut2012-09-27-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | The FEC hardware sometimes errors out on data transfer and hangs in the tightloop adjusted by this patch. So add timeout into the tightloop to make such a hang recoverable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * FEC: Properly align address over the buffers for cache opsMarek Vasut2012-09-27-6/+8
| | | | | | | | | | | | | | | | | | | | Align the address that's to be invalidated/flushed properly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advans> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
| * FEC: Do not pass unaligned buffer to network stackMarek Vasut2012-09-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not pass unaligned RX buffer to the upper layers. The upper layer, especially in the ARP case, recycles the buffer and passes it back into the FEC, into it's TX path. With caches enabled, the FEC hangs on this from time to time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advans> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| * net: Add Vitesse VSC8662 PHY supportPriyanka Jain2012-09-27-4/+14
| | | | | | | | | | | | | | | | | | | | | | -VSC8662 is Dual Port 10/100/1000Base-T Phy, 100Base-FX/1000/Base-X Gigabit Ethernt Transceiver Phy. -Its register set and features are similar to other Vitesse Phys Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * net/phy: support the mv88e6352 switchValentin Longchamp2012-09-27-0/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the configuration of an external switch from the 88E6xxx series from Marvell trough an MDIO link using indirect adressing. This can be used if we do not want to use an EEPROM for the configuration. This driver is not generic and was not tested on other switches than the 88e6352. This is proposed as a first implementation that is somewhat limited but works and that can be used as a basis for further developments for this switch family. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Joe Hershberger <joe.hershberger@gmail.com>
| * net: Add driver for Zynq Gem IPMichal Simek2012-09-26-0/+441
| | | | | | | | | | | | | | | | | | Device driver for Zynq Gem IP. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * net: Filter incoming netconsole packets by IPJoe Hershberger2012-09-24-2/+6
| | | | | | | | | | | | | | Check the incoming packets' source IP address... if ncip isn't set to a broadcast address, only listen to the client at ncip. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: Allow netconsole settings to change after nc_startJoe Hershberger2012-09-24-31/+65
| | | | | | | | | | | | | | Refresh the netconsole settings from the env before each packet instead of only on netconsole init. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: Improve the speed of netconsoleJoe Hershberger2012-09-24-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously u-boot would initialize the network interface for every network operation and then shut it down again. This makes sense for most operations where the network in not known to be needed soon after the operation is complete. In the case of netconsole, it will use the network for every interaction with the shell or every printf. This means that the network is being reinitialized very often. On many devices, this intialization is very slow. This patch checks for consecutive netconsole actions and leaves the ethernet hardware initialized between them. It will still behave the same old way for all other network operations and any time another network operation happens between netconsole operations. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * net: Make the netconsole buffer size configurableJoe Hershberger2012-09-24-2/+6
| | | | | | | | | | | | | | | | | | Allow a board to configure a larger buffer for netconsole, but leave the default. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
| * net: sh_eth: Add support R8A7740 of rmobile (arm core)Nobuhiro Iwamatsu2012-09-24-3/+13
| | | | | | | | | | | | | | | | R8A7740 of rmobile has ethernet device, and this is same IP of sh-ether. This support R8A7740 of rmobile. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
generated by cgit v1.1 at 2024-11-01 02:27:51 +0000