summaryrefslogtreecommitdiff
path: root/drivers/net/tsec.c
Commit message (Collapse)AuthorAgeLines
* tsec: Remove PHY command relocation fixupsPeter Tyser2009-10-03-49/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* net: tsec - handle user interrupt while waiting for PHY auto negotiation to ↵Kim Phillips2009-08-25-0/+7
| | | | | | | | | | | complete if you don't have firmware installed for the PHY to come to life, this wait can be painful - let's give the option to avoid it if we want. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Wait for auto-negotiation to complete without linkPeter Tyser2009-08-21-10/+9
| | | | | | | | | | | | | | | | | | | | | Previously, waiting for auto-negotiation would only occur if a valid link had been detected. Problems arose when attempting to use a tsec immediately after bootup but before link was achieved, eg: => dhcp Auto-neg error, defaulting to 10BT/HD eTSEC1: No link. Auto-neg error, defaulting to 10BT/HD eTSEC2: No link. => With this patch applied the same operation as above resulted in: => dhcp Waiting for PHY auto negotiation to complete. done Enet starting in 1000BT/FD Speed: 1000, full duplex Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Update Freescale copyrights to remove "All Rights Reserved"Kumar Gala2009-07-29-1/+1
| | | | | | "All Rights Reserved" conflicts with the GPL. Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
* P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)Poonam Aggrwal2009-07-22-1/+51
| | | | | | | | | These PHYs are on P2020RDB platform. Also revamped Freescale copyright message in drivers/net/tsec.c. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: tsec - fix dereferencing type-punned pointer will break strict-aliasing ↵Kim Phillips2009-07-22-1/+4
| | | | | | | | | | | | rules warning fix this gcc 4.4 warning: tsec.c: In function 'tsec_init': tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Add support for BCM5482S PHYZach LeRoy2009-06-15-0/+41
| | | | | | Signed-off-by: Zach LeRoy <zleroy@xes-inc.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: report when there is no vendor specific PHY supportPaul Gortmaker2009-03-09-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit af1c2b84 added a generic phy support, with an ID of zero and a 32 bit mask; meaning that it will match on any PHY ID. The problem is that there is a test that checked if a matching PHY was found, and if not, it printed the non-matching ID. But since there will always be a match (on the generic PHY, worst case), this test will never trip. In the case of a misconfigured PHY address, or of a PHY that isn't explicitly supported outside of the generic support, you will never see the ID of 0xffffffff, or the ID of the real (but unsupported) chip. It will silently fall through onto the generic support. This change makes that test useful again, and ensures that the selection of generic PHY support doesn't happen without some sort of notice. It also makes it explicitly clear that the generic PHY must be last in the PHY table. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Added Vitesse VSC8211 definitions to TSEC driverPieter Henning2009-02-22-0/+30
| | | | | | | | Added the struct containing PHY settings for the Vitesse VSC8211 phy to the phy_info list in tsec.c Signed-off-by: Pieter Henning <phenning@vastech.co.za> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Fix a bug in soft-resettingAndy Fleming2009-02-09-0/+1
| | | | | | | | | | SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30 clock cycles, so it's been mostly working. But we had no guarantee, and at slower bitrates, it's just over a microsecond (over 1000 clock cycles). This enforces a 2 microsecond gap between assertion and deassertion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Marvell 88E1118 interrupt fixRon Madrid2009-01-28-0/+4
| | | | | | | | This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: tsec: Fix Marvell 88E1121R phy initAnatolij Gustschin2008-12-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to ensure that phy interrupt pin won't be asserted after booting. We experienced following issues with current 88E1121R phy init: Marvell 88E1121R phy can be hardware-configured to share MDC/MDIO and interrupt pins for both ports P0 and P1 (e.g. as configured on socrates board). Port 0 interrupt pin will be shared by both ports in such configuration. After booting Linux and configuring eth0 interface, port 0 phy interrupts are enabled. After rebooting without proper eth0 interface shutdown port 0 phy interrupts remain enabled so any change on port 0 (link status, etc.) cause assertion of the interrupt. Now booting Linux and configuring eth1 interface will cause permanent phy interrupt storm as the registered phy 1 interrupt handler doesn't acknowledge phy 0 interrupts. This of course should be fixed in Linux driver too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-5/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* enable 10/100M at VSC8601 at tsec driverAndre Schwarz2008-10-13-0/+2
| | | | | | | | | Currently VSC8601 doesn't link with 10/100M partners if the EEPROM/Strapping is not set up. Setting the auto-neg register fixes this. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Support for multiple SGMII/TBI interfaces for TSEC ethernetPeter Tyser2008-09-16-3/+5
| | | | | | | | | Fix TBI PHY accesses to use the proper offset in CPU register space. The previous code would incorrectly access the TBI PHY by reading/writing to CPU register space at the same location as would be used to access external PHYs. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Add SGMII support to the tsecAndy Fleming2008-09-02-26/+48
| | | | | | | Adds support for configuring the TBI to talk properly with the SerDes. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Pass in tsec_info struct through tsec_initializeAndy Fleming2008-09-02-63/+50
| | | | | | | | | | | | | The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Move tsec.h to include/Andy Fleming2008-09-02-7/+1
| | | | | | | This is to prepare the way for board code passing in the tsec_info structure Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* PHY: Add support for the M88E1121R Marvell chip.Sergei Poselenov2008-09-02-0/+49
| | | | | | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: Conditional COBJS inclusion of network driversShinya Kuribayashi2008-06-09-3/+0
| | | | | | | Replace COBJS-y with appropriate driver config names. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Add Marvell 88E1118 support for TSECRon Madrid2008-05-23-0/+31
| | | | | Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* drivers/net/tsec.c: Fix typo.Wolfgang Denk2008-05-04-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* TSEC: add config options for VSC8601 RGMII PHYAndre Schwarz2008-05-03-0/+6
| | | | | | | | | | | | | | | | | The Vitesse VSC8601 RGMII PHY has internal delay for both Rx and Tx clock lines. They are configured using 2 bits in extended register 0x17. Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Andy Fleming <afleming@freescale.com> Acked-by: Ben Warren <biggerbadderben@gmail.com> -- drivers/net/tsec.c | 6 ++++++ drivers/net/tsec.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-)
* Add Vitesse 8601 support to TSEC driverTor Krill2008-03-31-0/+30
| | | | | | | | | Add phy_info for Vitesse VSC8601. Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. Signed-off-by: Tor Krill <tor@excito.com> Reviewed-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: fix link detection for the RTL8211B PHYAnton Vorontsov2008-03-25-2/+3
| | | | | | | | | | | RTL8211B sets link state register after autonegotiation complete, so with bootdelay=0 RTL8211B will report lack of the link. To fix this, we should wait for aneg to complete, even if the link is currently down. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* TSEC: Add the support for RealTek RTL8211B PHYDave Liu2008-01-16-0/+85
| | | | | | | | Add the support of RealTek RTL8211B PHY, the RTL8211B PHY only supports RGMII and MII mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO busmichael.firth@bt.com2008-01-16-20/+12
| | | | | | | | | The current TSEC driver limits MDIO access to the devices that have been configured as attached to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands. Signed-off-by: Michael Firth <michael.firth@bt.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fix Ethernet init() return codesBen Warren2008-01-10-1/+1
| | | | | | | | | | | | | | | | | | Change return values of init() functions in all Ethernet drivers to conform to the following: >=0: Success <0: Failure All drivers going forward should return 0 on success. Current drivers that return 1 on success were left as-is to minimize changes. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-By: Timur Tabi <timur@freescale.com>
* mpc83xx: Add the support of MPC837xEMDS boardDave Liu2008-01-08-0/+10
| | | | | | | | | | | The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
* drivers/net : move net drivers to drivers/netJean-Christophe PLAGNIOL-VILLARD2007-11-25-0/+1590
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.1 at 2024-12-03 16:11:46 +0000