summaryrefslogtreecommitdiff
path: root/drivers/net/tsec.c
Commit message (Collapse)AuthorAgeLines
* net: tsec: Fix NULL access in case init_phy() failsClaudiu Manoil2015-01-30-0/+2
| | | | | | | | If the PHY is not recognized don't access phydev (NULL) and return 0 to signal failure. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* ls102xa: etsec: Add etsec support for LS102xAAlison Wang2014-09-08-0/+7
| | | | | | | | | This patch is to add etsec support for LS102xA. First, Little-endian descriptor mode should be enabled. So RxBDs and TxBDs are interpreted with little-endian byte ordering. Second, TSEC_SIZE and TSEC_MDIO_OFFSET are different from PowerPC, redefine them for LS1021xA. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* net: tsec: Fix mac addr setup portability, cleanupClaudiu Manoil2013-11-22-10/+8
| | | | | | | | | | | | | | Fix the 32-bit memory access that is not "endianess safe", i.e. not giving the desired byte layout for LE cpus: tempval = *((uint *) (tmpbuf + 4)), where 'char tmpbuf[]'. Free the stack from rendundant local vars: tmpbuf[] and i. Use a portable type (u32) for the 32bit tsec register value holder: tempval. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* net: tsec: Use portable regs type (uint->u32)Claudiu Manoil2013-11-22-1/+1
| | | | | | | | Use cross arch portable u32 instead of uint for the tsec registers. Remove the typedefs for the register struct definitions in the process. Fix long lines. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* net: tsec: Use portable types and accessors for BDsClaudiu Manoil2013-11-22-42/+46
| | | | | | | | | | | | | | | | | | | | | Currently, the buffer descriptor (BD) fields cannot be correctly accessed by a little endian processor. This patch fixes the issue by making the access of BDs to be portable among different cpu architectures. Use portable data types for the Rx/Tx buffer descriptor fields. Use portable I/O accessors to insure that the big endian BDs are correctly accessed by little endian cpus too, and to insure proper sync with the H/W. Removed the redundant RTXBD "volatile" type, as proper synchronization around BD data accesses is provided by the I/O accessors now. The "sparse" tool was also used to verify the correctness of these changes. Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* net: tsec: Fix CamelCase issues around BD codeClaudiu Manoil2013-11-22-30/+30
| | | | | | | | Fix bufPtr and the rxIdx/ txIdx occurrences to solve the related checkpatch warnings for the coming patches. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* net: tsec: Cleanup tsec regs init and fix __iomem warnsClaudiu Manoil2013-11-22-13/+13
| | | | | | | | | | | | | | | | | | | | | | | Remove tsec_t typedef. Define macros as getters of tsec and mdio register memory regions, for consistent initialization of various 'regs' fields and also to manage overly long initialization lines. Use the __iomem address space marker to address sparse warnings in tsec.c where IO accessors are used, like: tsec.c:394:19: warning: incorrect type in argument 1 (different address spaces) tsec.c:394:19: expected unsigned int volatile [noderef] <asn:2>*addr tsec.c:394:19: got unsigned int *<noident> [...] Add the __iomem address space marker for the tsec pointers to struct tsec_mii_mng memory mapped register regions. This solves the sparse warnings for mixig normal pointers with __iomem pointers for tsec. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
* net: tsec: Fix priv pointer in tsec_mcast_addr()Claudiu Manoil2013-11-22-7/+1
| | | | | | | | | | | | | | | | | Access to privlist[1] (hardcoded referece to the 2nd tsec's priv area) is neither correct nor does it make sense in the current context. Each tsec dev has access to its own priv instance only, and hence to its own set of group address registers (GADDR) to filter multicast addresses. This fix leads to removal of the unused (faulty) privlist[] and related global static vars. Note that mcast() can be called only after eth_device allocation and init, and hence after priv area allocation, so dev->priv is correctly initialized upon mcast() call. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Patch: 278990
* net: tsec: Fix and cleanup tsec_mcast_addr()Claudiu Manoil2013-11-22-16/+15
| | | | | | | | | | | | | | There are several implementation issues for tsec_mcast_addr() addressed by this patch: * unmanaged, not portable r/w access to registers; fixed with setbits_be32()/ clrbits_be32() * use of volatile pointers * unnecessary forced cast to u8 for the ether_crc() result * removed redundant parens * corrected some comment slips Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Patch: 279000
* net: Fix mcast function pointer prototypeClaudiu Manoil2013-11-22-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following compiler warnings when activating CONFIG_MCAST_TFTP: tsec.c: In function 'tsec_mcast_addr': tsec.c:130:2: warning: passing argument 2 of 'ether_crc' makes pointer from integer without a cast [enabled by default] In file included from /work/u-boot-net/include/common.h:874:0, from tsec.c:15: /work/u-boot-net/include/net.h:189:5: note: expected 'const unsigned char *' but argument is of type 'u8' tsec.c: In function 'tsec_initialize': tsec.c:646:13: warning: assignment from incompatible pointer type [enabled by default] eth.c: In function 'eth_mcast_join': eth.c:358:2: warning: passing argument 2 of 'eth_current->mcast' makes integer from pointer without a cast [enabled by default] eth.c:358:2: note: expected 'u32' but argument is of type 'u8 *' In the eth_mcast_join() implementation, eth_current->mcast() takes a u8 pointer to the multicast mac address and not a ip address value as implied by its prototype. Fix parameter type mismatch for tsec_macst_addr() (tsec.c): ether_crc() takes a u8 pointer not a u8 value. mcast() is given a u8 pointer to the multicats mac address. Update parameter type for the rest of mcast() instances. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Patch: 278989
* net: abort network initialization if the PHY driver failsTimur Tabi2012-07-11-1/+7
| | | | | | | | | | Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part)
* ppc: Fix warning in TSEC Ethernet driverJoe Hershberger2012-05-22-3/+2
| | | | | | | | | | Fixes: tsec.c: In function 'tsec_initialize': tsec.c:638:12: warning: assignment from incompatible pointer type Tested on MPC8313e-RDB Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129chenhui zhao2011-11-08-0/+93
| | | | | | | | | | Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Minor coding style cleanup.Wolfgang Denk2011-05-19-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* tsec: Convert tsec to use PHY LibAndy Fleming2011-04-20-1504/+98
| | | | | | | | | | | | | This converts tsec to use the new PHY Lib. All of the old PHY support is ripped out. The old MDIO driver is split off, and placed in fsl_mdio.c. The initialization is modified to initialize the MDIO driver as well. The powerpc config file is modified to configure PHYLIB if TSEC_ENET is configured. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
* tsec: arrange the code to avoid useless function declarationMingkai Hu2011-04-20-440/+415
| | | | | | | | | | This is merely a rearrangement. No changes to the code, except to remove now-useless declarations. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
* tsec: use IO accessors for IO accessesMingkai Hu2011-04-20-123/+126
| | | | | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
* tsec: add AR8021 PHY supportLi Yang2011-04-04-0/+23
| | | | Signed-off-by: Li Yang <leoli@freescale.com>
* miiphy: convert to linux/mii.hMike Frysinger2011-01-09-25/+25
| | | | | | | | The include/miiphy.h header duplicates a lot of things from linux/mii.h. So punt all the things that overlap to keep the API simple and to make merging between U-Boot and Linux simpler. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMIIKumar Gala2010-12-13-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4 Author: Peter Tyser <ptyser@xes-inc.com> Date: Tue Nov 3 17:52:07 2009 -0600 tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode Removed setting Auto-Neg by default, however this is believed to be proper default configuration for initialization of the TBI interface. Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require Auto-Neg to be disabled to function properly. This addresses a breakage on the P2020 DS & MPC8572 DS boards when used with an SGMII riser card. We also remove setting CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the default setting is sufficient for them. Additionally, we clean up the code a bit to remove an unnecessary second define. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Peter Tyser <ptyser@xes-inc.com>
* miiphy: constify device nameMike Frysinger2010-08-09-4/+4
| | | | | | | The driver name does not need to be writable, so constify it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: fix the return value for tsec_eth_init()Timur Tabi2010-07-12-3/+12
| | | | | | | | | | | | | | The Ethernet initialization functions are supposed to return the number of devices initialized, so fix tsec_eth_init() so that they returns the number of TSECs initialized, instead of just zero. This is safe because the return value is currently ignored by all callers, but now they don't have to ignore it. In general, if an function initializes only one device, then it should return a negative number if there's an error. If it initializes more than one device, then it should never return a negative number. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: add micrel ksz804 phyHeiko Schocher2010-07-12-0/+22
| | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Fix eTSEC2 link problem on P2020RDBFelix Radensky2010-06-29-1/+5
| | | | | | | | | | | | On P2020RDB eTSEC2 is connected to Vitesse VSC8221 PHY via SGMII. Current TBI PHY settings for SGMII mode cause link problems on this platform, link never comes up. Fix this by making TBI PHY settings configurable and add a working configuration for P2020RDB. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Acked-by: Andy Fleming <afleming@freescale.com>
* tsec: Wait for both RX and TX to stopAndy Fleming2010-05-03-1/+2
| | | | | | | | | When gracefully stopping the controller, the driver was continuing if *either* RX or TX had stopped. We need to wait for both, or the controller could get into an invalid state. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Add TSEC_FIBER flagPeter Tyser2010-01-31-2/+4
| | | | | | | | | | | | The TSEC_FIBER flag should be set when a PHY is operating with an external fiber interface. Currently it is only used to notify a user that the PHY is operating in fiber mode. A short description was also added to the other TSEC flag defines so that it is clear how they differ from one another. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Add support for using the BCM5482 PHY in fiber modePeter Tyser2010-01-31-4/+106
| | | | | | | | | The BCM5482 PHY supports both copper and fiber as an ethernet medium. By enabling its copper/fiber mode auto-detection feature it can dynamically determine if it should be configured for copper or fiber. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: General cleanupPeter Tyser2010-01-31-345/+326
| | | | | | | | | | | - Cleanup formatting of phy_info structures - Fix lines > 80 chars - Fix some random indentation inconsistencies Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Make functions/data static when possiblePeter Tyser2010-01-31-43/+47
| | | | | | | This is generally good practice and saves ~150 bytes. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Clean up Broadcom PHY status parsingPeter Tyser2010-01-31-43/+34
| | | | | | | | | | | | | | | | - Remove unnecessary printing "Enet starting in <speed>/<duplex>" This same information is already printed during normal ethernet operation in the form "Speed: 1000, full duplex". - Add a check for link before determining link speed and duplex If there is no link, speed/duplex don't matter. This also removes the annoying and unneeded "Auto-neg error, defaulting to 10BT/HD" message that occurs when no link is detected. - Whitespace and line > 80 characters cleanup Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Force TBI PHY to 1000Mbps full duplex in SGMII modePeter Tyser2010-01-31-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | In SGMII mode the link between a processor's internal TBI PHY and an external PHY should always be 1000Mbps, full duplex. Also, the SGMII interface between an internal TBI PHY and external PHY does not support in-band auto-negotation. Previously, when configured for SGMII mode a TBI PHY would attempt to restart auto-negotation during initializtion. This auto-negotation between a TBI PHY and external PHY would fail and result in unusable ethernet operation. Forcing the TBI PHY and and external PHY to link at 1000Mbps full duplex in SGMII mode resolves this issue of auto-negotation failing. Note that 10Mbps and 100Mbps operation is still possible on the external side of the external PHY even when SGMII is operating at 1000Mbps. The SGMII interface still operates at 1000Mbps, but each byte of data is repeated 100 or 10 times for 10/100Mbps and the external PHY handles converting this data stream into proper 10/100Mbps signalling. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* NET: Move MDIO regs out of TSEC SpaceSandeep Gopalpet2010-01-05-11/+10
| | | | | | | | | | | | | | | | | Moved the mdio regs out of the tsec structure,and provided different offsets for tsec base and mdio base so that provision for etsec2.0 can be provided. This patch helps in providing the support for etsec2.0 In etsec2.0, the MDIO register space and the etsec reg space are different. Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into platform specific files. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* tsec: Remove PHY command relocation fixupsPeter Tyser2009-10-03-49/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* net: tsec - handle user interrupt while waiting for PHY auto negotiation to ↵Kim Phillips2009-08-25-0/+7
| | | | | | | | | | | complete if you don't have firmware installed for the PHY to come to life, this wait can be painful - let's give the option to avoid it if we want. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Wait for auto-negotiation to complete without linkPeter Tyser2009-08-21-10/+9
| | | | | | | | | | | | | | | | | | | | | Previously, waiting for auto-negotiation would only occur if a valid link had been detected. Problems arose when attempting to use a tsec immediately after bootup but before link was achieved, eg: => dhcp Auto-neg error, defaulting to 10BT/HD eTSEC1: No link. Auto-neg error, defaulting to 10BT/HD eTSEC2: No link. => With this patch applied the same operation as above resulted in: => dhcp Waiting for PHY auto negotiation to complete. done Enet starting in 1000BT/FD Speed: 1000, full duplex Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Update Freescale copyrights to remove "All Rights Reserved"Kumar Gala2009-07-29-1/+1
| | | | | | "All Rights Reserved" conflicts with the GPL. Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
* P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)Poonam Aggrwal2009-07-22-1/+51
| | | | | | | | | These PHYs are on P2020RDB platform. Also revamped Freescale copyright message in drivers/net/tsec.c. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: tsec - fix dereferencing type-punned pointer will break strict-aliasing ↵Kim Phillips2009-07-22-1/+4
| | | | | | | | | | | | rules warning fix this gcc 4.4 warning: tsec.c: In function 'tsec_init': tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Add support for BCM5482S PHYZach LeRoy2009-06-15-0/+41
| | | | | | Signed-off-by: Zach LeRoy <zleroy@xes-inc.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: report when there is no vendor specific PHY supportPaul Gortmaker2009-03-09-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit af1c2b84 added a generic phy support, with an ID of zero and a 32 bit mask; meaning that it will match on any PHY ID. The problem is that there is a test that checked if a matching PHY was found, and if not, it printed the non-matching ID. But since there will always be a match (on the generic PHY, worst case), this test will never trip. In the case of a misconfigured PHY address, or of a PHY that isn't explicitly supported outside of the generic support, you will never see the ID of 0xffffffff, or the ID of the real (but unsupported) chip. It will silently fall through onto the generic support. This change makes that test useful again, and ensures that the selection of generic PHY support doesn't happen without some sort of notice. It also makes it explicitly clear that the generic PHY must be last in the PHY table. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Added Vitesse VSC8211 definitions to TSEC driverPieter Henning2009-02-22-0/+30
| | | | | | | | Added the struct containing PHY settings for the Vitesse VSC8211 phy to the phy_info list in tsec.c Signed-off-by: Pieter Henning <phenning@vastech.co.za> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Fix a bug in soft-resettingAndy Fleming2009-02-09-0/+1
| | | | | | | | | | SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30 clock cycles, so it's been mostly working. But we had no guarantee, and at slower bitrates, it's just over a microsecond (over 1000 clock cycles). This enforces a 2 microsecond gap between assertion and deassertion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Marvell 88E1118 interrupt fixRon Madrid2009-01-28-0/+4
| | | | | | | | This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: tsec: Fix Marvell 88E1121R phy initAnatolij Gustschin2008-12-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to ensure that phy interrupt pin won't be asserted after booting. We experienced following issues with current 88E1121R phy init: Marvell 88E1121R phy can be hardware-configured to share MDC/MDIO and interrupt pins for both ports P0 and P1 (e.g. as configured on socrates board). Port 0 interrupt pin will be shared by both ports in such configuration. After booting Linux and configuring eth0 interface, port 0 phy interrupts are enabled. After rebooting without proper eth0 interface shutdown port 0 phy interrupts remain enabled so any change on port 0 (link status, etc.) cause assertion of the interrupt. Now booting Linux and configuring eth1 interface will cause permanent phy interrupt storm as the registered phy 1 interrupt handler doesn't acknowledge phy 0 interrupts. This of course should be fixed in Linux driver too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-5/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* enable 10/100M at VSC8601 at tsec driverAndre Schwarz2008-10-13-0/+2
| | | | | | | | | Currently VSC8601 doesn't link with 10/100M partners if the EEPROM/Strapping is not set up. Setting the auto-neg register fixes this. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Support for multiple SGMII/TBI interfaces for TSEC ethernetPeter Tyser2008-09-16-3/+5
| | | | | | | | | Fix TBI PHY accesses to use the proper offset in CPU register space. The previous code would incorrectly access the TBI PHY by reading/writing to CPU register space at the same location as would be used to access external PHYs. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Add SGMII support to the tsecAndy Fleming2008-09-02-26/+48
| | | | | | | Adds support for configuring the TBI to talk properly with the SerDes. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Pass in tsec_info struct through tsec_initializeAndy Fleming2008-09-02-63/+50
| | | | | | | | | | | | | The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* tsec: Move tsec.h to include/Andy Fleming2008-09-02-7/+1
| | | | | | | This is to prepare the way for board code passing in the tsec_info structure Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit v1.1 at 2024-11-02 15:34:48 +0000