summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy.c
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-05-24-0/+3
|\ | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/zynq_gem.c
| * net: phy: Add PHY driver for mv88e61xx switchesKevin Smith2016-05-24-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous mv88e61xx driver was a driver for configuring the switch, but did not integrate with the PHY/networking system, so it could not be used as a PHY by U-boot. This is a complete rework to support this device as a PHY. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | phy: Wire return value from phy_config()Michal Simek2016-05-24-3/+1
| | | | | | | | | | | | Fix zynq_gem driver to handle error from phy_config correctly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: phy: Handle phy_startup() error codes properlyMichal Simek2016-05-24-3/+6
| | | | | | | | | | | | | | Propagate error code from genphy_update_link() to phy startup(). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* | phy: Return correct error code when timeout happensMichal Simek2016-05-24-1/+1
|/ | | | | | | Return -ETIMEDOUT if timeout happens. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* phy: Add phy driver support for xilinx PCS/PMA coreSiva Durga Prasad Paladugu2016-04-04-0/+3
| | | | | | | | Add phy driver support for xilinx PCS/PMA core Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: phy: introduce a quirk PHY_FLAG_BROKEN_RESETShaohui Xie2016-01-28-0/+3
| | | | | | | | | | | Current driver always performs a phy soft reset when connecting the phy device, but soft reset is not always supported by a phy device, so introduce a quirk PHY_FLAG_BROKEN_RESET to let such a phy device to skip soft reset. This commit uses 'flags' of phy device structure to store the quirk. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Use 'autoneg' flag from phydevAlexandre Messier2016-01-28-2/+3
| | | | | | | | | | | | | | Use the 'autoneg' flag available in phydev when checking if autoneg is in use. The previous implementation was checking directly in the PHY if autoneg was supported. Some PHYs will report that autoneg is supported, even when it is disabled. Thus it is not possible to use that bit to determine if autoneg is currently in use or not. Signed-off-by: Alexandre Messier <amessier@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Set ANRESTART in setup_forcedAlexandre Messier2016-01-28-1/+1
| | | | | | | | | | | | | | | | | When configuring a PHY in fixed (forced) link mode, in order for the changes to be applied, either one of these conditions must be triggered: 1- PHY is reset 2- Autoneg is restarted 3- PHY transitions from power-down to power-up Neither of these is currently done, so effectively the fixed link configuration is not applied in the PHY. Fix this by setting the Autoneg restart bit. Signed-off-by: Alexandre Messier <amessier@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/net/phy: introduce phy_set_supported()Alexey Brodkin2016-01-28-0/+24
| | | | | | | | | | | | | This new function will allow MAC drivers to override supported capabilities of the phy. It is required when MAC cannot handle all speeds supported by phy. For example phy supports up-to 1Gb connections while MAC may only work in modes up to 100 or even 10 Mbit/sec. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: genphy: Allow overwriting featuresSascha Hauer2016-01-28-5/+5
| | | | | | | | | | | | | | | | | | | of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. This is a copy of the patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c242a47238fa2a6a54af8a16e62b54e6e031d4bc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: ensure Gigabit features are masked off if requestedFlorian Fainelli2016-01-28-18/+29
| | | | | | | | | | | | | | | | | | | | | | | | | When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet MAC, the driver will restrict the phydev->supported modes to mask off Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features set by default in MII_CTRL1000, it will keep advertising these feature, so by the time we call genphy_config_advert(), the condition on phydev->supported having the Gigabit features on is false, and we do not update MII_CTRL1000 with updated values, and we keep advertising Gigabit features, eventually configuring the PHY for Gigabit whilst the Ethernet MAC does not support that. This patches fixes the problem by ensuring that the Gigabit feature bits are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit PHY, and then, if Gigabit features are supported, setting those and updating MII_CTRL1000 accordingly. This is a copy of patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5273e3a5ca94fbeb8e07d31203069220d5e682aa Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: do not read configuration register on resetStefan Agner2016-01-28-9/+2
| | | | | | | | | | | | When doing a software reset, the reset flag should be written without other bits set. Writing the current state will lead to restoring the state of the PHY (e.g. Powerdown), which is not what is expected from a software reset. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Move console definitions into a new console.h fileSimon Glass2015-11-19-0/+1
| | | | | | | | The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: phy: Add support for Texas Instruments DP83867Edgar E. Iglesias2015-11-19-0/+3
| | | | | | | | | Code is taken from Linux kernel driver (v4.2). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Test previous phydev->dev against new mac devBin Meng2015-10-29-1/+1
| | | | | | | | | | In phy_connect_dev(), if the phy device has an accociated mac device before, a warning message will be printed. But we should test the old device against the new one, if they are actually the same one, don't print the warning message. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Change to print all phys that are not foundBin Meng2015-10-29-1/+8
| | | | | | | | | | | In get_phy_device_by_mask(), when no phy is found, currently we only print a message to show the first phy address that is not found. But this is not always the case as multiple phys can be specified by phy_mask. Change to print all phys that are not found, and to reduce the console boot log, change to use 'debug' instead of 'printf'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Don't create phy device when there is no phyBin Meng2015-10-29-1/+2
| | | | | | | | In get_phy_device_by_mask(), when no phy is found, we should not create any phy device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: on phy device create do not initialize link to 1Mugunthan V N2015-09-29-1/+1
| | | | | | | | | | | | | | | | Currently when phy device is created the link variable is initialized to 1 which denoted phy link is already up. On a power reset there is no issue as phy status register link status will not be set, so phy auto negotiate will be started. But when a cpu reset is issued (ex: dra72x-evm) phy's link status bit is already set which leads to assume that link is already setup in genphy_update_link() initial check which results in ehternet not working. So do not assume that link is already up and on phy device create set link to zero. This is verified on dra72x-evm. Reported-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: delay only if reset handler is registeredJörg Krause2015-08-11-3/+5
| | | | | | | | With commit e3a77218a256edbe201112a39beeed8adcabae3f the MII bus is only reset if a reset handler is registered. If there is no reset handler there is no need to wait for a device to come out of the reset. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
* net: phy: fix data type of phy_idJörg Krause2015-08-11-1/+1
| | | | | | phy_id is declared as u32 in create_phy_by_mask and in struct phy_device. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
* net: phy: Add support for all targets which requires MANUAL_RELOCMichal Simek2015-05-19-0/+16
| | | | | | | | | | | Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA relocation (mostly only GOT) where functions aray are not updated. This patch is fixing function pointers passed to phy_register function. This patch was tested on Microblaze architecture. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net/phy: fixup for get_phy_idShengzhou Liu2015-04-20-1/+1
| | | | | | | | commit 3c6928fd7b0f84 "net: phy: fix warnings with W=1" caused some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the warning and make those special PHYs working as well. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* dm: net: Adjust PHY interface to work with CONFIG_DM_ETHSimon Glass2015-04-18-0/+22
| | | | | | | | | | | | When driver model is used for Ethernet a few functions are passed a udevice instead of an eth_device. Also add a function to find a PHY type given its name. This will be used to decode the device tree node. Finally, put a phy_interface field in struct eth_pdata since this is an important part of the platform data for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* phylib: add support for aquantia PHYsShaohui Xie2015-01-16-0/+3
| | | | | | | | This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/phy: Add support for CS4315/CS4340 PHYShengzhou Liu2014-12-05-0/+3
| | | | | | | | | | | | Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-10-27-1/+1
|\
| * net: phy: print a number of phy that is not foundKhoronzhuk, Ivan2014-10-23-1/+1
| | | | | | | | | | | | | | | | In case when several Ethernet ports are supported it's convenient to see the number of phy that is not found. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | net: phy: fix warnings with W=1Jeroen Hofstee2014-10-25-5/+2
|/ | | | | | | | get_phy_id is marked weak but has no protype nor a strong version, just make it static. Use __weak for board_phy_config. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* drivers: net: remove dead driversMasahiro Yamada2014-08-21-3/+0
| | | | | | | | | | The following configs are not defined at all: - CONFIG_INCA_IP_SWITCH - CONFIG_PBL2800_ETHER - CONFIG_PHY_ICPLUS Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* phy: fix create_phy_by_mask for when its given an actual search maskCormier, Jonathan2014-06-05-3/+1
| | | | | | | | | | | | | | | | get_phy_id returns -EIO when it can't read from a phy at a given addr. This would cause create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask. Example usage: Replace phydev = phy_connect(bus, phy_addr, dev, phy_if) with phydev = phy_find_by_mask(bus, phy_mask, phy_if) if (phydev) phy_connect_dev(phydev, dev); Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* net/phy: enable get_phy_id redefinableShengzhou Liu2014-05-12-1/+2
| | | | | | | | | As some PHYs have non-standard PHY ID registers, PHY Id can't be read correctly by current get_phy_id function, so we enable get_phy_id redefinable to permit specific PHY driver having own specific get_phy_id function. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* phy: Use supported field during autonegotiationDavid Dueck2013-11-22-2/+3
| | | | | | | The current code incorrectly detects gigabit capabilities for some 100Mbit/s phys. (lan8720a) Signed-off-by: David Dueck <davidcdueck@googlemail.com>
* net, phy, cpsw: fix gigabit register accessHeiko Schocher2013-07-30-1/+5
| | | | | | | | | | | | | accessing a lan9303 switch with the cpsw driver results in wrong speed detection, as the switch sets the BMSR_ERCAP in BMSR register, and follow read of the MII_STAT1000 register fails, as the switch does not support it. Current code did not check, if a phy_read() fails ... fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-15/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF caseFabio Estevam2013-07-19-1/+1
| | | | | | | | | | | | | Commit de1d786e (add support for Xilinx 1000BASE-X phy (GTX)) introduced the checking for ESTATUS_1000_XHALF, but it incorrectly sets the SUPPORTED_1000baseX_Full flag in this case. Set the SUPPORTED_1000baseX_Half flag instead. Acked-by: Charles Coldwell <coldwell@gmail.com> Reviewed-By: Sascha Silbe <t-uboot@infra-silbe.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* phy: fix 10/100Mbps operation on 1Gbps-capable linksSascha Silbe2013-07-19-1/+9
| | | | | | | | | | | | | | | | | de1d786 [add support for Xilinx 1000BASE-X phy (GTX)] introduced a check for the extended status register in order to support 1Gbps-capable PHYs that don't have the 1000BASE-T registers. Since Extended Status only indicates what the PHY (i.e. the local side) is capable of, this broke communication with non-1Gbps peers. Only check the extended status if the 1000BASE-T registers are actually missing so we don't end up setting speed to 1Gbps even though the previous test (for the combination of local and peer support for 1Gbps) already indicated we can't do 1Gbps with the current peer. Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* add support for Xilinx 1000BASE-X phy (GTX)Charles Coldwell2013-06-24-0/+21
| | | | | | | | | | commit 39695029bc15041c809df3db4ba19bd729c447fa Author: Charles Coldwell <coldwell@ll.mit.edu> Date: Tue Feb 19 08:27:33 2013 -0500 Changes to support the Xilinx 1000BASE-X phy (GTX/MGT) Signed-off-by: Charles Coldwell <coldwell@ll.mit.edu>
* net: add ICPlus PHY driverYegor Yefremov2013-06-24-0/+3
| | | | | | | The driver code was taken from Linux kernel source: drivers/net/phy/icplus.c Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* phy: export genphy_parse_link()Yegor Yefremov2013-06-24-1/+1
| | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* phy: add support for ET1011C physMatt Porter2013-05-10-0/+3
| | | | | | | | | | | | Adds an ET1011C PHY driver which is derived from the Linux kernel PHY driver (drivers/net/phy/et1011c.c) from the v3.9-rc2 tag. Note that an errata workaround config option is implemented to allow for TX_CLK to be enabled even when gigabit mode is negotiated. This workaround is used on the PG1.0 TI814X EVM. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* phy: add phy_find_by_mask/phy_connect_devTroy Kisky2013-01-28-50/+78
| | | | | | | | | | | | It is useful to be able to try a range of possible phy addresses to connect. Also, an ethernet device is not required to use phy_find_by_mask leading to better separation of mii vs ethernet, as suggested by Andy Fleming. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* drivers/net/: sparse fixesKim Phillips2012-11-04-9/+10
| | | | | | | | | | | | | | | | | | | phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* phylib: phy_startup() should return an error code on failureTimur Tabi2012-07-11-1/+4
| | | | | | | phy_startup() calls the PHY driver's startup function, but it ignores the return code from that function, and so it never returns any failures. Signed-off-by: Timur Tabi <timur@freescale.com>
* net: phy: make board_phy_config responsible for calling drv->configTroy Kisky2012-02-27-3/+2
| | | | | | | | | Boards may have things they want done before or after normal phy config. Letting the boards call drv->config allows them more flexibilty. Boards affected by this change are corenet_ds and mpc8544ds. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* phy: Add support for SMSC LAN87xx PHYsNobuhiro Iwamatsu2011-12-05-0/+3
| | | | | | | | | | | | | | | This adds support for the SMSC LAN87xx PHYs. Following PHYs can be used by set CONFIG_PHY_SMSC to config. - SMSC LAN8700 - SMSC LAN8710/LAN8720 - SMSC LAN8710/LAN8720 A setup of PHY was copied from linux kenrel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Fixed white space errors; modified commit message a bit. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Revert "phylib: remove a couple of redundant code lines"Wolfgang Denk2011-09-28-2/+5
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 041c542219af7f31c372d89b4c7c6f4c8064a8ce. The lines removed by this commit weren't redundant. The logic is (and probably should be better commented): Find the intersection of the advertised capabilities of both sides of the link (lpa). From that intersection, find the highest capability we can run at (that will be the negotiated link). Now imagine that the intersection (lpa) is (LPA_100HALF | LPA_10FULL). The code will now set phydev->speed to 100, and phydev->duplex to 1, but this link does not support 100FULL. Kudos to Andy Fleming <afleming@gmail.com> for binging this to attention and for the explanation. Signed-off-by: Wolfgang Denk <wd@denx.de>
* phylib: remove a couple of redundant code linesVladimir Zapolskiy2011-09-10-5/+2
| | | | | | | | This change slightly improves readability of the phydev speed/duplex assignment logic. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Detlev Zundel <dzu@denx.de>
* phylib: reset mii bus only if reset handler is registeredVladimir Zapolskiy2011-09-10-1/+2
| | | | | | | | This change allows to cope with a mii bus device registered using miiphy_register(), which doesn't assign a default reset handler. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Detlev Zundel <dzu@denx.de>
* phy.c: make less verbose - turn printf() into debug()Wolfgang Denk2011-08-31-1/+1
| | | | | | | | | | | | | | | | | | | | The PHY driver was too verbose and corrupted the boot message display like this: ... Net: TSEC0 connected to Marvell 88E1111S TSEC1 connected to Marvell 88E1111S TSEC0, TSEC1 ... Turn printf() into debug() so we het the expected output again: ... Net: TSEC0, TSEC1 ... Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-11-09 02:26:54 +0000