summaryrefslogtreecommitdiff
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeLines
* lpc32xx: mtd: nand: add MLC NAND controllerAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+765
| | | | | | | | | | The controller's Reed-Solomon ECC hardware is used except of course for raw reads and writes. It covers in- and out-of-band data together. The SPL framework is supported. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-03-31-0/+6
|\
| * ARM: at91: atmel_nand: Support flash based BBTDavid Dueck2015-04-01-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for on-flash bad block table. This makes U-Boot handle an existing BBT correctly. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Reviewed-by: Boris BREZILLON <boris.brezillon@free-electrons.com> CC: Boris BREZILLON <boris.brezillon@free-electrons.com> CC: Josh Wu <josh.wu@atmel.com> CC: Andreas Bießmann <andreas.devel@googlemail.com> CC: Scott Wood <scottwood@freescale.com> Acked-by: Josh Wu <josh.wu@atmel.com>
* | mtd: vf610_nfc: specify transfer size before each transferStefan Agner2015-03-30-8/+17
| | | | | | | | | | | | | | | | | | | | Testing showed, that commands like STATUS made the buffer dirty when executed with NFC_SECSZ set to the page size. It looks like the controller transfers bogus data when this register is configured. When setting it to 0, the buffer does not get altered while the status command still seems to work flawless. Signed-off-by: Stefan Agner <stefan@agner.ch>
* | mtd: vf610_nfc: mark page as dirty on block eraseStefan Agner2015-03-30-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver tries to re-use the page buffer by storing the page number of the current page in the buffer. The page is only read if the requested page number is not currently in the buffer. When a block is erased, the page number is marked as invalid if the erased page equals the one currently in the cache. However, since a erase block consists of multiple pages, also other page numbers could be affected. The commands to reproduce this issue (on a written page): > nand dump 0x800 > nand erase 0x0 0x20000 > nand dump 0x800 The second nand dump command returns the data from the buffer, while in fact the page is erased (0xff). Avoid the hassle to calculate whether the page is affected or not, but set the page buffer unconditionally to invalid instead. Signed-off-by: Stefan Agner <stefan@agner.ch>
* | nand: yaffs: Remove the "nand write.yaffs" commandPeter Tyser2015-03-30-65/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This command is only enabled by one board, complicates the NAND code, and doesn't appear to have been functioning properly for several years. If there are no bad blocks in the NAND region being written nand_write_skip_bad() will take the shortcut of calling nand_write() which bypasses the special yaffs handling. This causes invalid YAFFS data to be written. See http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for an example and a potential workaround. U-Boot still retains the ability to mount and access YAFFS partitions via CONFIG_YAFFS2. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | nand: Remove CONFIG_MTD_NAND_VERIFY_WRITEPeter Tyser2015-03-30-248/+0
| | | | | | | | | | | | | | | | | | The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some time and a more generic method of NAND verification now exists in U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | nand: Add verification functionsPeter Tyser2015-03-30-1/+96
| | | | | | | | | | | | | | | | | | | | Add nand_verify() and nand_verify_page_oob(). nand_verify() verifies NAND contents against an arbitrarily sized buffer using ECC while nand_verify_page_oob() verifies a NAND page's contents and OOB. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | mtd: nand: mxs: fix PIO_WORDs in mxs_nand_write_buf()Luca Ellero2015-03-30-1/+1
| | | | | | | | | | | | There is only one pio_word in this DMA transaction so data field must be 1. Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
* | mtd: nand: mxs: fix PIO_WORDs in mxs_nand_read_buf()Luca Ellero2015-03-30-1/+1
|/ | | | | | There is only one pio_word in this DMA transaction so data field must be 1. Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
* omap: gpmc: 'nandecc sw' can use HAM1 or BCH8Ash Charles2015-03-05-1/+11
| | | | | | | | | | | | | | | The 'nandecc sw' command selects a software-based error correction algorithm. By default, this is OMAP_ECC_HAM1_CODE_SW but some platforms use OMAP_ECC_BCH8_CODE_HW_DETECTION_SW as their software-based correction algorithm. Allow a user to be specific e.g. # nandecc sw <hamming|bch8> where 'hamming' is still the default. Note: we don't just use CONFIG_NAND_OMAP_ECCSCHEME as it might be set to a hardware-based ECC scheme---a little strange when the user has requested 'sw' ECC. Signed-off-by: Ash Charles <ashcharles@gmail.com>
* mtd: nand: omap_gpmc: Make ready/busy pins configurableMichal Sojka2015-03-05-2/+14
| | | | | | | | | | | | | | | | | | | | | | | Commit fb384c4720ca7496775d6578f184bf628db73456 introduced the use of WAIT0 pin for determining whether the NAND is ready or not. This only works if all NAND chips are connected to WAIT0. If some chips are connected to the other available pin WAIT1, nand_wait() does not really wait and prints a WARN_ON message. This patch allows the board to provide configuration of which chip is connected to which WAITx signal. For example, one can define in include/configs/foo.h: #define CONFIG_NAND_OMAP_GPMC_WSCFG 0,0,1,1 This would mean that chips using to CS0 and 1 are connected to WAIT0 and chips with CS2 and 3 are connected to WAIT1. Signed-off-by: Michal Sojka <sojka@merica.cz> Acked-by: Stefan Roese <sr@denx.de> Tested-by: Michal Vokáč <michal.vokac@comap.cz> Cc: Tom Rini <trini@ti.com>
* kconfig: remove unneeded dependency on !SPL_BUILDMasahiro Yamada2015-02-24-4/+0
| | | | | | | Now CONFIG_SPL_BUILD is not defined in Kconfig, so "!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* kconfig: switch to single .config configurationMasahiro Yamada2015-02-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When Kconfig for U-boot was examined, one of the biggest issues was how to support multiple images (Normal, SPL, TPL). There were actually two options, "single .config" and "multiple .config". After some discussions and thought experiments, I chose the latter, i.e. to create ".config", "spl/.config", "tpl/.config" for Normal, SPL, TPL, respectively. It is true that the "multiple .config" strategy provided us the maximum flexibility and helped to avoid duplicating CONFIGs among Normal, SPL, TPL, but I have noticed some fatal problems: [1] It is impossible to share CONFIG options across the images. If you change the configuration of Main image, you often have to adjust some SPL configurations correspondingly. Currently, we cannot handle the dependencies between them. It means one of the biggest advantages of Kconfig is lost. [2] It is too painful to change both ".config" and "spl/.config". Sunxi guys started to work around this problem by creating a new configuration target. Commit cbdd9a9737cc (sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.) added "make *_felconfig" to enable CONFIG_SPL_FEL on both images. Changing the configuration of multiple images in one command is a generic demand. The current implementation cannot propose any good solution about this. [3] Kconfig files are getting ugly and difficult to understand. Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files. [4] The build system got more complicated than it should be. To adjust Linux-originated Kconfig to U-Boot, the helper script "scripts/multiconfig.sh" was introduced. Writing a complicated text processor is a shell script sometimes caused problems. Now I believe the "single .config" will serve us better. With it, all the problems above would go away. Instead, we will have to add some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM, but we will not have much. Anyway, this is what we do now in scripts/Makefile.spl. I admit my mistake with my apology and this commit switches to the single .config configuration. It is not so difficult to do that: - Remove unnecessary processings from scripts/multiconfig.sh This file will remain for a while to support the current defconfig format. It will be removed after more cleanups are done. - Adjust some makefiles and Kconfigs - Add some entries to include/config_uncmd_spl.h and the new file scripts/Makefile.uncmd_spl. Some CONFIG options that are not supported on SPL must be disabled because one .config is shared between SPL and U-Boot proper going forward. I know this is not a beautiful solution and I think we can do better, but let's see how much we will have to describe them. - update doc/README.kconfig More cleaning up patches will follow this. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* mtd, omap: fix case NAND_OMAP_GPMC_PREFETCH not definedEgli, Samuel2015-02-16-1/+4
| | | | | | | | | | | | | | | | The patch c316f577b4b72d1a1aeb559e9b3fad20808f1ffd breaks siemens boards because prefetch mode is not enabled. I assume it breaks other boards as well that don't use prefetch. This patch sets read_buf to nand_read_buf if NAND_OMAP_GPMC_PREFETCH is not defined. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> CC: Daniel Mack <zonque@gmail.com> CC: Guido Martínez <guido@vanguardiasur.com.ar> CC: Tom Rini <trini@ti.com> CC: Heiko Schocher <hs@denx.de>
* dm: Expand and complete Kconfig in drivers/Simon Glass2015-02-12-0/+16
| | | | | | | | Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* mtd: atmel_nand: according to pmecc version to perform 0xff page correctionWu, Josh2015-02-07-0/+29
| | | | | | | | | | | | As the PMECC hardware has different version. In SAMA5D4 chip, the PMECC ip can generate 0xff pmecc ECC value for all 0xff sector. According to this, add PMECC version check, if it's SAMA5D4 then we always let PMECC hardware to correct it. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini2015-02-04-0/+8
|\
| * ubi: reset mtd_devs when ubi part failHeiko Schocher2015-01-28-0/+8
| | | | | | | | | | | | | | if "ubi part" fails, reset also mtd_devs to 0, as further "ubi part" would use wrong mtd_devs. Signed-off-by: Heiko Schocher <hs@denx.de>
* | dm: spi: Move slave details to child platdataSimon Glass2015-01-29-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: sandbox: sf: Tidy up the error handling in sandbox_sf_probe()Simon Glass2015-01-29-2/+5
| | | | | | | | | | | | Use a single exit point when we have an error and add debugging there. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: tegra: nand: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-5/+4
|/ | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boardsMasahiro Yamada2015-01-23-5/+0
| | | | | | | | | | | These boards are still non-generic boards. It is a good thing that we can drop board-specific hack code from drivers/mtd/nand/nand_base.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Andrea "llandre" Marson <andrea.marson@dave-tech.it>
* mtd: OMAP: Enable GPMC prefetch modeDaniel Mack2015-01-13-2/+112
| | | | | | | | | | | | | | | | | | | | | | | | | Enable GPMC's prefetch feature for NAND access. This speeds up NAND read access a lot by pre-fetching contents in the background and reading them through the FIFO address. The current implementation has two limitations: a) it only works in 8-bit mode b) it only supports read access Both is easily fixable by someone who has hardware to implement it. Note that U-Boot code uses non word-aligned buffers to read data into, and request read lengths that are not multiples of 4, so both partial buffers (head and tail) have to be addressed. Tested on AM335x hardware. Tested-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Daniel Mack <zonque@gmail.com> [trini: Make apply again, use 'cs' fix pointed out by Guido] Signed-off-by: Tom Rini <trini@ti.com>
* mtd: nand: do not scan BBT after scrubMasahiro Yamada2015-01-09-8/+3
| | | | | | | | | | | | | | | | | Currently, "nand scrub" runs chip->scan_bbt at the end of nand_erase_opts() even if NAND_SKIP_BBTSCAN flag is set. It violates the intention of NAND_SKIP_BBTSCAN. Move NAND_SKIP_BBTSCAN flag check to nand_block_checkbad() so that chip->scan_bbt() is never run if NAND_SKIP_BBTSCAN is set. Also, unset NAND_BBT_SCANNED flag instead of running chip->scan_bbt() right after scrub. We can be lazier here because the BBT is scanned at the next call of nand_block_checkbad(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com>
* mtd: nand: Mark the BBT as scanned prior to calling scan_bbt againMasahiro Yamada2015-01-09-1/+1
| | | | | | | | | | | | | | | | | | | | | Commit 35c204d8a9d0 (nand: reinstate lazy bad block scanning) broke NAND_BBT_USE_FLASH feature. Its git-log claimed that it reinstated the change as by commit fb49454b1b6c ("nand: reinstate lazy bad block scanning"), but it moved "chip->options |= NAND_BBT_SCANNED" below "chip->scan_bbt(mtd);". It causes recursion if scan_bbt does not find a flash based BBT and tries to write one, and the attempt to erase the BBT area causes a bad block check. Reinstate commit ff49ea8977b5 (NAND: Mark the BBT as scanned prior to calling scan_bbt.). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rostislav Lisovy <lisovy@merica.cz> Cc: Heiko Schocher <hs@denx.de> Cc: Scott Wood <scottwood@freescale.com>
* mtd: nand: revive "nand scrub" commandMasahiro Yamada2015-01-09-1/+1
| | | | | | | | | Since commit ff94bc40af34 (mtd, ubi, ubifs: resync with Linux-3.14), the "nand scrub" command has not been working. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Heiko Schocher <hs@denx.de>
* mtd: nand: omap_gpmc: fix error handlingGuido Martínez2015-01-05-1/+2
| | | | | | | | | | | | "err" was an unsigned variable, causing negative error codes to turn into positive values, which are interpreted as an amount of succesfully corrected bitflips (and thus not an error). In particular, this resulted in that if the elm reports uncorrectable errors (-EBADMSG), the MTD layer (and UBI) falsely succeeded. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Stefan Roese <sr@denx.de>
* sf: sf_params: Add S25FL164K flash identifier infoAdnan Ali2014-12-18-0/+1
| | | | | | | | Add the necessary flash entry for the Spansion S25FL164K flash. Tested on Marvell 88F6218 based design. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* sf: sf_params: Add S25FL116K flash supportAdnan Ali2014-12-18-0/+1
| | | | | | | Added S25FL116K flash and tested on Marvell 88F6281 based system. Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* mtd/spi: Add support for SST25WF040BShengzhou Liu2014-12-18-0/+1
| | | | | | | | Add support for SST25WF040B-40I-SN flash. Tested on T1024QDS board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* mtd: sf: Zap ramtron driverJagannadha Sutradharudu Teki2014-12-18-405/+0
| | | | | | | | | | | | | Removed ramtron driver since the EMK boards are no longer been active, and these are the only boards used this flash driver. Commit details for EMK zap: "ppc/arm: zap EMK boards" (sha1: d58a9451e7339ed4cf2b2627e534611f427fb791) Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
* sf: Enable byte program supportJagannadha Sutradharudu Teki2014-12-13-12/+19
| | | | | | | | | | | | | | Enabled byte program support for sst flashes in sf. Few controllers will only support BP, so this patch gives a tx transfer flag to set the BP so-that sf will operate on byte program transfer. A new TX operation mode SPI_OPM_TX_BP is introduced for such SPI controller to use byte program op for SST flash. Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* spi: sf: Support byte program for sst spi flashBin Meng2014-12-13-0/+33
| | | | | | | | | | | | | Currently if SST flash advertises SST_WP flag in the params table the word program command (ADh) with auto address increment will be used for the flash write op. However some SPI controllers do not support the word program command (like the Intel ICH 7), the byte programm command (02h) has to be used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* spi: Fix flag collision for SST_WPSimon Glass2014-12-13-1/+1
| | | | | | | | | At present SECT_4K is the same as SST_WP so we cannot tell these apart. Fix this so that the table in sf_params.c can be used correctly. Reported-by: Jens Rottmann <Jens.Rottmann@adlinktech.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* sf: Fix look for the fastest read commandJagannadha Sutradharudu Teki2014-12-13-56/+60
| | | | | | | | | | | Few of the spi controllers are only supports array slow read which is quite different behaviour compared to others. So this fix on sf will correctly handle the slow read supported controllers. Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* driver/mtd: Fix IFC compilation warningsJaiprakash Singh2014-12-11-1/+1
| | | | | | | 'eccstat' array elements might be used uninitialized Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arm: ls102xa: Add NAND boot support for LS1021AQDS boardAlison Wang2014-12-11-0/+10
| | | | | | | | | | | This patch adds NAND boot support for LS1021AQDS board. SPL framework is used. PBL initialize the internal RAM and copy SPL to it, then SPL initialize DDR using SPD and copy u-boot from NAND flash to DDR, finally SPL transfer control to u-boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mtd: nand: omap_gpmc: Always use ready/busy pinStefan Roese2014-12-04-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions to detect the state of the ready / busy signal is already available but only used in the SPL case. Lets use it always, also for the main U-Boot. As all boards should have this HW connection. Testing on Siemens Draco (am335x) showed a small perfomance gain by using this ready pin to detect the NAND chip state. Here the values tested on Draco with Hynix 4GBit NAND: Without NAND ready pin: U-Boot# time nand read 80400000 0 400000 NAND read: device 0 offset 0x0, size 0x400000 4194304 bytes read: OK time: 2.947 seconds, 2947 ticks With NAND ready pin: U-Boot# time nand read 80400000 0 400000 NAND read: device 0 offset 0x0, size 0x400000 4194304 bytes read: OK time: 2.795 seconds, 2795 ticks So an increase of approx. 5%. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com>
* mtd: nand: s3c: Unify the register definition and namingMarek Vasut2014-11-26-19/+19
| | | | | | | | | | | | | | Merge struct s3c2410_nand and struct s3c2440_nand into one unified struct s3c24x0_nand. While at it, fix up and rename the functions to retrieve the NAND base address and fix up the s3c NAND driver to reflect this change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Vladimir Zapolskiy <vz@mleia.com>
* mtd/nand/vf610_nfc: Disable subpage writesSanchayan Maity2014-11-26-0/+3
| | | | | | | | | | | | This patch disables subpage writes for vf610_nfc nand driver. This is required, as without this fix, writing unaligned u-boot images with DFU results in a hang. Trying to write unalgined binary images also results in a hang, without disabling subpage writes. Patch has been tested on a Colibri VF61 module. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* mtd: denali: set some registers after nand_scan_ident()Masahiro Yamada2014-11-26-0/+11
| | | | | | | | | | | | | | | | | Some but not all of implementations of the Denali NAND controller have hardware circuits to detect the device parameters such as page_size, erase_size, etc. Even on those SoCs with such hardware supported, the hardware is known to detect wrong parameters for some nasty (almost buggy) NAND devices. The device parameters detected during nand_scan_ident() are more trustworthy. This commit sets some hardware registers to mtd->pagesize, mtd->oobsize, etc. in the code between nand_scan_ident() and nand_scan_tail(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Chin Liang See <clsee@altera.com>
* mtd: denali: use CONFIG_SYS_NAND_SELF_INITMasahiro Yamada2014-11-26-40/+93
| | | | | | | | | | | | | | | | Some variants of the Denali NAND controller need some registers set up based on the device information that has been detected during nand_scan_ident(). CONFIG_SYS_NAND_SELF_INIT has to be defined to insert code between nand_scan_ident() and nand_scan_tail(). It is also helpful to reduce the difference between this driver and its Linux counterpart because this driver was ported from Linux. Moreover, doc/README.nand recommends to use CONFIG_SYS_NAND_SELF_INIT. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Chin Liang See <clsee@altera.com>
* nand: reinstate lazy bad block scanningRostislav Lisovy2014-11-26-3/+7
| | | | | | | | | | | | | | | Commit ff94bc40af3481d47546595ba73c136de6af6929 ("mtd, ubi, ubifs: resync with Linux-3.14") accidentally reverted part of the commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde ("NAND: Scan bad blocks lazily."). Reinstate the change as by commit fb49454b1b6c7c6e238ac3c0b1e302e73eb1a1ea ("nand: reinstate lazy bad block scanning") Signed-off-by: Rostislav Lisovy <lisovy@merica.cz> Acked-by: Heiko Schocher <hs@denx.de>
* Merge git://git.denx.de/u-boot-dmTom Rini2014-11-24-2/+2
|\ | | | | | | | | | | | | Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
| * dm: spi: Use device_bind_driver() instead of our own functionSimon Glass2014-11-22-1/+1
| | | | | | | | | | | | | | | | | | | | The SPI function does the same thing, so we may as well just use the new generic function. The 'cs' parameter was not actually used, so can be dropped. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
| * dm: spi: Correct handling of SPI chip selects in sandboxSimon Glass2014-11-22-1/+1
| | | | | | | | | | | | | | | | | | This code was not updated when the chip select handling was adjusted. Fix it to call the correct function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
* | linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-23-4/+5
|/ | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini2014-11-19-0/+1
|\
| * mtd, cfi, ubi: add missing writebufsize initializationHeiko Schocher2014-11-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | ff94bc40af3481d47546595ba73c136de6af6929 "mtd, ubi, ubifs: resync with Linux-3.14" introduced the writebufsize field in struct mtd_info, which is not initialized in the cfi_flash driver, which leads in not working ubi on cfi flashes. Fix it Signed-off-by: Heiko Schocher <hs@denx.de> Reported-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
generated by cgit v1.1 at 2024-11-05 22:06:32 +0000