summaryrefslogtreecommitdiff
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeLines
...
* | | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2014-06-11-10/+11
|\ \ \ | |_|/ |/| |
| * | sf: probe: Fix quad bit set pathPoddar, Sourav2014-06-08-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, flash quad bit is set in "spi_flash_validate_params" and later at the end in the same api, we write 0 to status register for few flashes, thereby overriding the quad bit set. This fix moves the quad bit setting outside this api in "spi_flash_probe_slave" Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * | sf: params: Added support for Spansion S25FL512S_512KSiva Durga Prasad Paladugu2014-06-08-0/+1
| |/ | | | | | | | | | | | | | | Added support for Spansion chip "S25FL512S_512K". Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | mtd: nand: omap: add support for BCH16_ECC - NAND driver updatespekon gupta2014-06-06-1/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for BCH16_ECC to omap_gpmc driver. *need to BCH16 ECC scheme* With newer SLC Flash technologies and MLC NAND, and large densities, pagesizes Flash devices have become more suspectible to bit-flips. Thus stronger ECC schemes are required for protecting the data. But stronger ECC schemes have come with larger-sized ECC syndromes which require more space in OOB/Spare. This puts constrains like; (a) BCH16_ECC can correct 16 bit-flips per 512Bytes of data. (b) BCH16_ECC generates 26-bytes of ECC syndrome / 512B. Due to (b) this scheme can only be used with NAND devices which have enough OOB to satisfy following equation: OOBsize per page >= 26 * (page-size / 512) Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device ↵pekon gupta2014-06-06-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bus-width GPMC controller needs to be configured based on bus-width of the NAND device connected to it. Also, dynamic detection of NAND bus-width from on-chip ONFI parameters is not possible in following situations: SPL: SPL NAND drivers does not support ONFI parameter reading. U-boot: GPMC controller iniitalization is done in omap_gpmc.c:board_nand_init() which is called before probing for devices, hence any ONFI parameter information is not available during GPMC initialization. Thus, OMAP NAND driver expected board developers to explicitely write GPMC configurations specific to NAND device attached on board in board files itself. But this was troublesome for board manufacturers as they need to dive into lengthy platform & SoC documents to find details of GPMC registers and appropriate configurations to get NAND device working. This patch instead adds existing CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config hich indicates that connected NAND device has x16 bus-width. And then based on this config GPMC driver itself initializes itself based on NAND bus-width. This keeps board developers free from knowing GPMC controller specific internals. Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: force NAND_CMD_READID onto 8-bit busBrian Norris2014-06-06-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per following Sections in ONFI Spec, NAND_CMD_READID should use only lower 8-bit for transfering command, address and data even on x16 NAND device. *Section: Target Initialization" "The Read ID and Read Parameter Page commands only use the lower 8-bits of the data bus. The host shall not issue commands that use a word data width on x16 devices until the host determines the device supports a 16-bit data bus width in the parameter page." *Section: Bus Width Requirements* "When the host supports a 16-bit bus width, only data is transferred at the 16-bit width. All address and command line transfers shall use only the lower 8-bits of the data bus. During command transfers, the host may place any value on the upper 8-bits of the data bus. During address transfers, the host shall set the upper 8-bits of the data bus to 00h." Thus porting following commit from linux-kernel to ensure that column address is not altered to align to x16 bus when issuing NAND_CMD_READID command. commit 3dad2344e92c6e1aeae42df1c4824f307c51bcc7 mtd: nand: force NAND_CMD_READID onto 8-bit bus Author: Brian Norris <computersforpeace@gmail.com> (preserving authorship) The NAND command helpers tend to automatically shift the column address for x16 bus devices, since most commands expect a word address, not a byte address. The Read ID command, however, expects an 8-bit address (i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or 0x20). This fixes the column address for a few drivers which imitate the nand_base defaults. Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: don't use read_buf for 8-bit ONFI transfersBrian Norris2014-06-06-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Porting below commit from linux-tree, preserving original authorship & commit log commit bd9c6e99b58255b9de1982711ac9487c9a2f18be Author: Brian Norris <computersforpeace@gmail.com> mtd: nand: don't use read_buf for 8-bit ONFI transfers Use a repeated read_byte() instead of read_buf(), since for x16 buswidth devices, we need to avoid the upper I/O[16:9] bits. See the following commit for reference: commit 05f7835975dad6b3b517f9e23415985e648fb875 (from linux-tree) Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Date: Thu Dec 5 22:22:04 2013 +0100 mtd: nand: don't use {read,write}_buf for 8-bit transfers Now, I think that all barriers to probing ONFI on x16 devices are removed, so remove the check from nand_flash_detect_onfi(). Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: fix error-codes returned from omap-elm driverpekon gupta2014-06-06-6/+9
| | | | | | | | | | | | | | | | | | | | | | This patch omap-elm.c: replaces -ve integer value returned during errorneous condition, with proper error-codes. omap-gpmc.c: updates omap-gpmc driver to pass error-codes returned from omap-elm driver to upper layers Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bchpekon gupta2014-06-06-5/+5
| | | | | | | | | | | | | | | | This patch tries to avoid some local pointer dereferences, by using common local variables in omap_correct_data_bch() Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_infopekon gupta2014-06-06-32/+26
| | | | | | | | | | | | | | | | | | This patch renames 'struct nand_bch_priv' which currently holds private data only for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for all ECC schemes Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'pekon gupta2014-06-06-17/+6
| | | | | | | | | | | | | | | | | | | | This patch prepares to refactor 'struct nand_bch_priv' -> 'struct omap_nand_info' And thus performs following clean-ups: - remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead - remove nand_bch_priv.mode: <unused> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate ↵pekon gupta2014-06-06-20/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | between BCH4/BCH8/BCH16 ELM hardware engine support ECC error detection for multiple ECC strengths like +------+------------------------+ |Type | ECC syndrome length | +------+------------------------+ |BCH4 | 6.5 bytes = 13 nibbles | |BCH8 | 13 byte = 26 nibbles | |BCH16 | 26 bytes = 52 nibbles | +------+------------------------+ Current implementation of omap_elm driver uses ECC syndrom length (in 'nibbles') to differentiate between BCH4/BCH8/BCH16. This patch replaces it with 'bch_type' Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | mtd: nand: omap_elm: remove #include omap_gpmc.hpekon gupta2014-06-06-1/+0
|/ | | | | | | There is no dependency of omap_elm.c on omap_gpmc.h Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_gpmc: Fix update of read_ecc in oobBelisko Marek2014-05-13-1/+1
| | | | | | | We need to flip only one bit not assign. Signed-off-by: Marek Belisko <marek.belisko@gmail.com> Acked-by: Pekon Gupta <pekon@ti.com>
* Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-1796/+26
|\ | | | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * driver: Add support of image load for MMC & SPI in SPLPrabhakar Kushwaha2014-04-22-0/+14
| | | | | | | | | | | | | | Add support of loading image, binary for MMC and SPI during SPL boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * driver/mtd/spi:Read 8KB data chunk during u-boot load in SPLPrabhakar Kushwaha2014-04-22-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI driver perform its operation(read/write) on 64KB buffer chunk for data greater than 64KB. This buffer chunk is allocated from system heap. During SPL boot, 768KB of data is read from SPI flash. Here, heap size may not be sufficient enough to full-fill 64KB buffer requirement of SPI driver. So break down u-boot read operation at 8KB of chunk. Also, fix a warning i.e. "unused variable buf" during CONFIG_FSL_CORENET Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * driver/ifc: define nand_spl_load_image() for SPLPrabhakar Kushwaha2014-04-22-13/+0
| | | | | | | | | | | | | | nand_spl_load_image() can also be used for non TPL framework. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * mtd: delete unused filesMasahiro Yamada2014-04-17-1780/+0
| | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Scott Wood <scottwood@freescale.com>
* | NAND: DaVinci: allow forced disable of subpage writesKaricheri, Muralidharan2014-04-17-0/+3
| | | | | | | | | | | | | | | | | | This patch introduces a configurable mechanism to disable subpage writes in the DaVinci NAND driver. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
* | SPL:SPI: Add Falcon Mode supportTom Rini2014-04-17-6/+40
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPLTom Rini2014-04-17-0/+3
| | | | | | | | | | Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
* | mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPLTom Rini2014-04-17-27/+27
|/ | | | | | | | This mainly converts the am335x_spl_bch driver to the "normal" format which means a slight change to nand_info within the driver. Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
* mtd: spi: Fix page size for S25FL032P,S25FL064PMarek Vasut2014-03-17-1/+15
| | | | | | | | | | | | The commit 6af8dc3ebccb3b1e4b2e479315e49545e7f53150 broke support for S25FL032P and S25FL064P by carelessly removing the code handling special page size for these two SPI NOR flashes and unifying the code under the assumption that Extended JEDEC ID of 0x4d00 always implies 512b page size. Add special case handling for these two SPI NOR flashes. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: ops: Squash the malloc+memset comboJagannadha Sutradharudu Teki2014-03-17-2/+6
| | | | | | | Squash the malloc()+memset() combo in favor of calloc(). Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* sf: Squash the malloc+memset comboMarek Vasut2014-03-17-2/+1
| | | | | | | Squash the malloc()+memset() combo in favor of calloc(). Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Add S25FL128S_256K IDsMarek Vasut2014-03-17-0/+1
| | | | | | | Add IDs for this new chip. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Fix entries for S25FL256S_256K and S25FL512S_256KMarek Vasut2014-03-17-2/+2
| | | | | | | | | Both of these chips have 256kB big sectors, thus the _256K suffix, compared to their _64K counterparts, which have 64kB sectors. Also, they have four times less sectors than their _64K counterparts. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-03-10-0/+208
|\
| * mtd: nand: atmel: prepare for nand spl boot supportBo Shen2014-03-09-0/+208
| | | | | | | | | | | | | | | | | | Prepare for nand spl boot support. It supports nand software ECC and hardware PMECC. This patch is take <drivers/mtd/nand/nand_spl_simple.c> as reference. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ppc4xx: Remove 4xx NAND booting supportStefan Roese2014-03-07-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As ppc4xx currently only supports the deprecated nand_spl infrastructure and nobody seems to have time / resources to port this over to the newer SPL infrastructure, lets remove NAND booting completely. This should not affect the "normal", non NAND-booting ppc4xx platforms that are currently supported. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Tirumala Marri <tmarri@apm.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Tested-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* | mtd: nand: omap: move omap_elm.h from arch/arm/include/asm to drivers/mtd/nandpekon gupta2014-03-04-2/+2
| | | | | | | | | | | | | | | | | | omap_elm.h is a generic header used by OMAP ELM driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nandpekon gupta2014-03-04-2/+2
| | | | | | | | | | | | | | | | | | omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers ↵pekon gupta2014-03-04-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into common omap_gpmc.h Each SoC platform (AM33xx, OMAP3, OMAP4, OMAP5) has its own copy of GPMC related defines and declarations scattered in SoC platform specific header files like include/asm/arch-xx/cpu.h However, GPMC hardware remains same across all platforms thus this patch merges GPMC data scattered across different arch-xx specific header files into single header file include/asm/arch/omap_gpmc.h Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemespekon gupta2014-03-03-90/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chip->ecc.correct() is used for detecting and correcting bit-flips during read operations. In omap-nand driver it implemented as: (a) omap_correct_data(): for h/w based ECC_HAM1 scheme (b) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW for ECC_BCH8 scheme using GPMC and software lib/bch.c (c) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW for ECC_BCH8 scheme using GPMC and ELM This patch updates (c) - checks for calc_ecc[]==0x00 so that error_correction is not required for known good pages. - adds scalability for other ECC_BCHx scheme by merging following omap_rotate_ecc_bch() + omap_fix_errors_bch() => omap_correct_data_bch() - fixing logic for bit-flip correction based on error_loc[count] Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemespekon gupta2014-03-03-163/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chip->ecc.calculate() is used for calculating and fetching of ECC syndrome by processing the data passed during Read/Write accesses. All H/W based ECC schemes use GPMC controller to calculate ECC syndrome. But each BCHx_ECC scheme has its own implemetation of post-processing and fetching ECC syndrome from GPMC controller. This patch updates OMAP_ECC_BCH8_CODE_HW ECC scheme in following way: - merges multiple chip->calculate API for different ECC schemes omap_calculate_ecc() + omap_calculate_ecc_bch() + omap_calculate_ecc_bch_sw() ==> omap_calculate_ecc() - removes omap_ecc_disable() and instead uses it as inline. Signed-off-by: Pekon Gupta <pekon@ti.com>
* | mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemespekon gupta2014-03-03-142/+56
|/ | | | | | | | | | | | | | | | | | | chip->ecc.hwctl() is used for preparing the H/W controller before read/write NAND accesses (like assigning data-buf, enabling ECC scheme configs, etc.) Though all ECC schemes in OMAP NAND driver use GPMC controller for generating ECC syndrome (for both Read/Write accesses). But but in current code HAM1_ECC and BCHx_ECC schemes implement individual function to achieve this. This patch (1) removes omap_hwecc_init() and omap_hwecc_init_bch() as chip->ecc.hwctl will re-initializeGPMC before every read/write call. omap_hwecc_init_bch() -> omap_enable_ecc_bch() (2) merges the GPMC configuration code for all ECC schemes into single omap_enable_hwecc(), thus adding scalability for future ECC schemes. omap_enable_hwecc() + omap_enable_ecc_bch() -> omap_enable_hwecc() Signed-off-by: Pekon Gupta <pekon@ti.com>
* driver/ifc:Change accessor function to take care of endiannessPrabhakar Kushwaha2014-02-03-151/+152
| | | | | | | | | | | IFC registers can be of type Little Endian or big Endian depending upon Freescale SoC. Here SoC defines the register type of IFC IP. So update acessor functions with common IFC acessor functions to take care both type of endianness. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* powerpc:mpc85xx: Add ifc nand boot support for TPL/SPLPo Liu2014-01-21-7/+24
| | | | | | | | | | | | | | | Using the TPL method for nand boot by sram was already supported. Here add some code for mpc85xx ifc nand boot. - For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec. - Use a clear function name for nand spl boot. - Add CONFIG_SPL_DRIVERS_MISC_SUPPORT to compile the fsl_ifc.c in spl/Makefile; Signed-off-by: Po Liu <Po.Liu@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* nand, gpmc: fix reading after switching eccJeroen Hofstee2014-01-17-0/+1
| | | | | | | | | | | | | | The omap_gpmc allows switching ecc at runtime. Since the NAND_SUBPAGE_READ flag is only set, it is kept when switching to hw ecc, which is not correct. This leads to calling chip->ecc.read_subpage which is not a valid pointer. Therefore clear the flag when switching ecc so reading in hw mode works again. Cc: Scott Wood <scottwood@freescale.com> Cc: Pekon Gupta <pekon@ti.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* sf: params: Removed flag SECT_4K for Micron N25Q128Siva Durga Prasad Paladugu2014-01-12-2/+2
| | | | | | | | | Remove the flag SECT_4K for device N25Q128 as the 4K-byte sub sector erase granularity is available only for top/bottom 8 sectors in some of the N25Q128 chips. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Add CONFIG_SF_DUAL_FLASHJagannadha Sutradharudu Teki2014-01-12-5/+14
| | | | | | | This config will use for defining greater than single flash support. currently - DUAL_STACKED and DUAL_PARALLEL. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Add dual memories support - DUAL_PARALLELJagannadha Sutradharudu Teki2014-01-12-7/+12
| | | | | | | | | This patch added support for accessing dual memories in parallel connection with single chipselect line from controller. For more info - see doc/SPI/README.dual-flash Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Add dual memories support - DUAL_STACKEDJagannadha Sutradharudu Teki2014-01-12-11/+57
| | | | | | | | | This patch added support for accessing dual memories in stacked connection with single chipselect line from controller. For more info - see doc/SPI/README.dual-flash Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: ops: Unify read_ops bank configurationJagannadha Sutradharudu Teki2014-01-12-8/+5
| | | | | | Unified the bar code from read_ops into a spi_flash_bar() Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Code cleanupsJagannadha Sutradharudu Teki2014-01-12-13/+8
| | | | | | | - comment typo's - func args have a proper names Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Divide flash register ops from QEB codeJagannadha Sutradharudu Teki2014-01-11-53/+77
| | | | | | | QEB code comprises of couple of flash register read/write operations, this patch moved flash register operations on to sf_op Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: probe: Enable macronix quad read/write cmds supportJagannadha Sutradharudu Teki2014-01-11-4/+4
| | | | | | | | | Added macronix flash quad read/write commands support and it's up to the respective controller driver usecase to configure the respective commands by defining SPI RX/TX operation modes from include/spi.h on the driver. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Add macronix set QEB supportJagannadha Sutradharudu Teki2014-01-11-0/+35
| | | | | | | This patch adds set QEB support for macronix flash devices which are trying to program/read quad operations. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* sf: Discover read dummy_byteJagannadha Sutradharudu Teki2014-01-11-7/+30
| | | | | | | Discovered the read dummy_byte based on the configured read command. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
generated by cgit v1.1 at 2024-11-01 12:27:28 +0000