summaryrefslogtreecommitdiff
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeLines
* spi/stmicro: fix debug() display of cmdMike Frysinger2008-12-16-1/+1
| | | | | | | | The stmicro_wait_ready() func tries to show the actual opcode that was sent to the device, but instead it displays the array pointer. Fix it to pull out the opcode from the start of the array. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* UBI: Return -ENOMEM upon failing mallocStefan Roese2008-12-10-2/+3
| | | | | | | Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon failing malloc(). Signed-off-by: Stefan Roese <sr@denx.de>
* UBI: Enable re-initializing of the "ubi part" commandStefan Roese2008-12-09-0/+1
| | | | | | | With this patch now, the user can call "ubi part" multiple times to re-connect the UBI device to another MTD partition. Signed-off-by: Stefan Roese <sr@denx.de>
* MTD: Fix problem based on non-working relocation (list head mtd_partitions)Stefan Roese2008-12-09-1/+9
| | | | | | | | Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon first call of add_mtd_partitions(). Otherwise this won't work on platforms where the relocation is broken (like MIPS or PPC). Signed-off-by: Stefan Roese <sr@denx.de>
* mtd/dataflash.c: fix a problem with the last partitionIlko Iliev2008-12-02-1/+1
| | | | | | | | | This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash partition can be defined to use the area to the end of dataflash size. Now it is possible to have only one dataflash partition from 0 to the end of of dataflash size. Signed-off-by: Ilko Iliev <iliev@ronetix.at>
* fix some coding style violations.Ilko Iliev2008-12-02-13/+12
| | | | | | This patch fix some coding style violations. Signed-off-by: Ilko Iliev <iliev@ronetix.at>
* NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().Scott Wood2008-11-25-6/+6
| | | | | | | | This caused the operation to be needlessly repeated if there were no bad blocks and no errors. Signed-off-by: Valeriy Glushkov <gvv@lstec.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk2008-11-25-0/+12566
|\
| * mtd: Remove a printf() from add_mtd_device().Piotr Ziecik2008-11-24-2/+0
| | | | | | | | | | | | | | Remove a printf() from add_mtd_device(), which produces spurious output. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * UBI: Add basic UBI support to U-Boot (Part 5/8)Kyungmin Park2008-11-19-0/+3810
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic UBI (Unsorted Block Image) support to U-Boot. It's based on the Linux UBI version and basically has a "OS" translation wrapper that defines most Linux specific calls (spin_lock() etc.) into no-ops. Some source code parts have been uncommented by "#ifdef UBI_LINUX". This makes it easier to compare this version with the Linux version and simplifies future UBI ports/bug-fixes from the Linux version. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * UBI: Add basic UBI support to U-Boot (Part 4/8)Kyungmin Park2008-11-19-0/+2538
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic UBI (Unsorted Block Image) support to U-Boot. It's based on the Linux UBI version and basically has a "OS" translation wrapper that defines most Linux specific calls (spin_lock() etc.) into no-ops. Some source code parts have been uncommented by "#ifdef UBI_LINUX". This makes it easier to compare this version with the Linux version and simplifies future UBI ports/bug-fixes from the Linux version. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * UBI: Add basic UBI support to U-Boot (Part 3/8)Kyungmin Park2008-11-19-0/+2018
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic UBI (Unsorted Block Image) support to U-Boot. It's based on the Linux UBI version and basically has a "OS" translation wrapper that defines most Linux specific calls (spin_lock() etc.) into no-ops. Some source code parts have been uncommented by "#ifdef UBI_LINUX". This makes it easier to compare this version with the Linux version and simplifies future UBI ports/bug-fixes from the Linux version. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * UBI: Add basic UBI support to U-Boot (Part 2/8)Kyungmin Park2008-11-19-0/+1768
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic UBI (Unsorted Block Image) support to U-Boot. It's based on the Linux UBI version and basically has a "OS" translation wrapper that defines most Linux specific calls (spin_lock() etc.) into no-ops. Some source code parts have been uncommented by "#ifdef UBI_LINUX". This makes it easier to compare this version with the Linux version and simplifies future UBI ports/bug-fixes from the Linux version. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * UBI: Add basic UBI support to U-Boot (Part 1/8)Kyungmin Park2008-11-19-0/+1755
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic UBI (Unsorted Block Image) support to U-Boot. It's based on the Linux UBI version and basically has a "OS" translation wrapper that defines most Linux specific calls (spin_lock() etc.) into no-ops. Some source code parts have been uncommented by "#ifdef UBI_LINUX". This makes it easier to compare this version with the Linux version and simplifies future UBI ports/bug-fixes from the Linux version. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * MTD: Add MTD paritioning infrastructureKyungmin Park2008-11-19-0/+679
| | | | | | | | | | | | | | | | This MTD part infrastructure will be used by the upcoming UBI support. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi-mtd: Add cfi-mtd driver.Piotr Ziecik2008-11-24-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | Add cfi-mtd driver, which exports CFI flash to MTD layer. This allows CFI flash devices to be used from MTD layer. Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD option. Initialization is done by calling cfi_mtd_init() from flash_init(). Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: Add interface for flash verbosity controlPiotr Ziecik2008-11-24-11/+22
| | | | | | | | | | | | | | | | | | | | | | Add interface for flash verbosity control. It allows to disable output from low-level flash API. It is useful when calling these low-level functions from context other than flash commands (for example the MTD/CFI interface implmentation). Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: Export flash_sector_size() function.Piotr Ziecik2008-11-24-2/+0
| | | | | | | | | | | | | | | | Export flash_sector_size() function from drivers/mtd/cfi_flash.c, so that it can be used in the upcoming cfi-mtd driver. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: Make all flash access functions weakStefan Roese2008-11-24-7/+25
|/ | | | | | | | | | | | | | | | | This patch defines all flash access functions as weak so that they can be overridden by board specific versions. This will be used by the upcoming VCTH board support where the NOR FLASH unfortunately can't be accessed memory-mapped. Special accessor functions are needed here. To enable this weak functions you need to define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header. Otherwise the "old" default functions will be used resulting in smaller code. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* CFI Driver: Fix "flash not ready" problemWolfgang Denk2008-10-31-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem on systems where the NOR flash is attached to a 64 bit bus. The toggle bit detection in flash_toggle() is based on the assumption that the same flash address is read twice without any other interjacent flash accesses. However, on 32 bit systems the function flash_read64() [as currently implemented] does not perform an atomic 64 bit read - instead, this is broken down into two 32 bit read accesses on addresses "addr" and "addr + 4". So instead of reading a 64 bit value twice from "addr", we see a sequence of 4 32 bit reads from "addr", "addr + 4", "addr", and "addr + 4". The consequence is that flash_toggle() fails to work. This patch implements a simple, but somewhat ugly solution, as it avoids the use of flash_read64() in this critical place (by breaking it down manually into 32 bit read operations) instead of rewriting flash_read64() such to perform atomic 64 bit reads as one could expect. However, such a rewrite would require the use of floating point load operations, which becomes pretty complex: save MSR; set Floating Point Enable bit in MSR; use "lfd" instruction to perform atomic 64 bit read; use "stfd" to store value to temporary variable on stack; load u64 value from temporary variable; restore saved MSR; return u64 value; The benefit-cost ratio of such an implementation was considered too bad to actually attempt this, especially as we can expect that such an implementation would not only have a bigger memory footprint but also cause a performance degradation. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* NAND: Properly create JFFS2 cleanmarkers.Scott Wood2008-10-29-19/+11
| | | | | | | | | | | As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean" command is currently broken, and among other things causes all blocks to be marked bad. This implements it properly using MTD_OOB_AUTO, along with some indentation fixes. Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND fsl elbc: Set FMR[ECCM] based on page size.Scott Wood2008-10-29-2/+14
| | | | | | | Hardware expects ECCM 0 for small page and ECCM 1 for large page when booting from NAND, so use those defaults. Signed-off-by: Scott Wood <scottwood@freescale.com>
* Make Freescale local bus registers available for both 83xx and 85xx.Haiying Wang2008-10-29-9/+11
| | | | | | | | | | | | | - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it can be shared by both 83xx and 85xx - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards files which use lbus83xx_t. - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that 85xx can share them. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: Reset chip on power-upKarl Beldan2008-10-29-0/+8
| | | | | | | | | | Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx). The first command sent is NAND_CMD_READID. Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id. Tested with an MT29F4G08AAC. Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: sync with 2.6.27Scott Wood2008-10-29-43/+141
| | | | | | | | | | | | | This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood <scottwood@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-90/+90
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix the NAND size overflow issue.Jason Jin2008-10-14-2/+2
| | | | | | | | | | | | | When the total size of all NAND devices exceeds 4 GiB, the size will overflow. This patch tries to fix this. Note that we still have a problem when a single NAND device is bigger than 4 GiB: then the overflow would actually happen earlier, i. e. when storing the size in nand_info[].size, as nand_info[].size is an "u_int32_t". Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* CFI: cfi_flash write fix for AMD legacyEd Swarthout2008-10-13-3/+5
| | | | | | | | The flash_unlock_seq requires a sector for AMD_LEGACY. Fix a retcode check typeo. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
* cfi_flash: do not reset flash when probe failsMike Frysinger2008-10-02-1/+2
| | | | | | | | | | | | | | | The CFI flash driver starts at flash_init() which calls down into flash_get_size(). This starts by calling flash_detect_cfi(). If said function fails, flash_get_size() finishes by attempting to reset the flash. Unfortunately, it does this with an info->portwidth set to 0x10 which filters down into flash_make_cmd() and that happily smashes the stack by sticking info->portwidth bytes into a cfiword_t variable that lives on the stack. On a 64bit system you probably won't notice, but killing the last 8 bytes on a 32bit system usually leads to a corrupt return address. Which is what happens on a Blackfin system. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2008-09-13-6/+50
|\
| * fsl_elbc_nand: ecclayout cleanupsAnton Vorontsov2008-09-12-4/+0
| | | | | | | | | | | | | | | | | | | | This patch deletes oobavail assignments, they're calculated by the nand core code in nand_scan_tail, plus current oobavail values are wrong for the LP NANDs. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * fsl_elbc_nand: implement support for flash-based BBTAnton Vorontsov2008-09-12-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements support for flash-based BBT for chips working through ELBC NAND controller, so that NAND core will not have to re-scan for bad blocks on every boot. Because ELBC controller may provide HW-generated ECCs we should adjust bbt pattern and bbt version positions in the OOB free area. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * fsl_elbc_nand: fix OOB workability for large page NAND chipsAnton Vorontsov2008-09-12-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For large page chips, nand_bbt is looking into OOB area, and checking for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be reserved for bbt means. But ELBC driver is specifying ecclayout so that oobfree area starts at offset 1, so only one byte left for the bbt purposes. This causes problems with any OOB users, namely JFFS2: after first mount JFFS2 will fill all OOBs with "erased marker", so OOBs will contain: OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff And on the next boot, NAND core will rescan for bad blocks, then will see "0xff 0x19" pattern, and will mark all blocks as bad ones. To fix the issue we should implement our own bad block pattern: just one byte at OOB start. Though, this will work only for x8 chips. For x16 chips two bytes must be checked. Since ELBC driver does not support x16 NANDs (yet), we're safe for now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | rename CFG_ENV macros to CONFIG_ENVJean-Christophe PLAGNIOL-VILLARD2008-09-10-8/+8
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASHJean-Christophe PLAGNIOL-VILLARD2008-09-10-2/+2
|/ | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2008-09-10-1/+1
|\
| * Fix printf errors under -DDEBUGAndrew Klossner2008-09-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix printf format-string/arg mismatches under -DDEBUG. These warnings occur with DEBUG defined for a platform using cpu/mpc85xx. Users of other architectures can unearth similar problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right after "CFLAGS += $(call cc-option,-fno-stack-protector)". Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | mtd: SPI Flash: Support the STMicro FlashTsiChung Liew2008-09-09-0/+363
|/ | | | | | | | Add MTD SPI Flash support for M25P16, M25P20, M25P32, M25P40, M25P64, M25P80, M25P128. Signed-off-by: Jason McMullan <mcmullan@netapp.com> Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* Update i386 code (sc520_cdp)Graeme Russ2008-09-09-1/+1
| | | | | | Attempt to bring i386 / sc520 inline with master Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* NAND: add NAND driver for S3C64XXGuennadi Liakhovetski2008-08-31-0/+320
| | | | | | Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* Minor coding style cleanup, updte CHANGELOGWolfgang Denk2008-08-25-5/+5
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix OneNAND read_oob/write_oob functions compatabilityKyungmin Park2008-08-21-200/+706
| | | | | | | Also sync with kernel OneNAND codes Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()Nick Spence2008-08-20-0/+1
| | | | | | | This patch fixes a missing vendor code in the flash_real_protect() function. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
* CFI: Fix AMD Legacy sector protectTsiChung Liew2008-08-20-3/+9
| | | | | | | | | New implement sector lock and unlock or softlock commands do not exist in AMD legacy flash. Thus, causing issue when erasing AMD legacy flash (such as lv040) Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2008-08-14-6/+60
|\
| * Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-08-14-2797/+3597
| |\
| * | cfi-flash: Added support to flash_real_protect for Atmel flash devicesRafael Campos2008-08-06-6/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the flash memories produced by ATMEL start in read-only mode. We need to unprotect it. This patch allows the AT49BV6416 to work with cfi_flash memories. Tested in the at91rm9200ek board. Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | cfi-flash: Add definition for the AM29LV800BB AMD NOR-flashGuennadi Liakhovetski2008-08-06-0/+17
| | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Coding Style cleanup, update CHANGELOGWolfgang Denk2008-08-14-83/+83
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2008-08-14-39/+96
|\ \ \ | |_|/ |/| |
generated by cgit v1.1 at 2024-12-13 10:21:55 +0000