summaryrefslogtreecommitdiff
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeLines
* MTD/NAND: fix nand_base.c to use get_timer() correctlyReinhard Meyer2010-12-17-6/+9
| | | | | | | | | This is part of the timer cleanup effort. In the future we only use get_timer() in its intended way to program timeout loops. reset_timer() shall not be used anymore. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* nand: constify id/manu tablesMike Frysinger2010-12-17-5/+5
| | | | | | These id tables need not be writable. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'next' of git://www.denx.de/git/u-boot-cfi-flash into nextWolfgang Denk2010-12-17-3/+58
|\
| * cfi_flash: Add optional config register write to cfi-detectionStefan Roese2010-12-17-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the possibility to (optinally) write to the flash configuration register. The Intel style CFI chips support such a register that can be used to configure the operation mode to a non-default value. This method will be used by the t3corp board, which needs to configure the DS617 Xilinx flash for async read mode. Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: Use flash_read32() in sector_erased()Stefan Roese2010-12-17-3/+3
| | | | | | | | | | | | | | | | | | | | The function sector_erased() is modified to not use pointer access, but to use the correct accessor functions. This fixes a problem on the t3corp board with the Xilinx DS617 flash chips. Here a board specific accessor function is needed to read from flash in 32bit mode. This patch enables such an operation mode. Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: Fix problems with status/id read modeStefan Roese2010-12-17-0/+12
| | | | | | | | | | | | | | | | | | This patch adds some calls to set the flash chip in the read-status- register- or read-id-mode before the corresponding register is read back. This problem was detected while porting the common CFI driver to support the Xilinx DS617 flash chips. Signed-off-by: Stefan Roese <sr@denx.de>
* | sf: winbond: add support for W25Q16/32/128 partsWojtek Skulski2010-12-17-10/+29
| | | | | | | | | | | | | | While we're here, cut out the useless id defines too. Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | sf: new driver for EON devicesChong Huang2010-12-17-0/+280
|/ | | | | | Signed-off-by: Chong Huang <chuang@ucrobotics.com> Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* fsl_upm: Add MxMR/MDR synchronizationJohn Schmoller2010-12-13-0/+2
| | | | | | | | | | | | | | | | | According to Freescale reference manuals (eg section "13.4.4.2 Programming the UPMs" of the P4080 Reference Manual): "Since the result of any update to the MxMR/MDR register must be in effect before the dummy read or write to the UPM region, a write to MxMR/MDR should be followed immediately by a read of MxMR/MDR." The UPM on a custom P4080-based board did not work without performing a read of MxMR/MDR after a write. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fix s3c2410_nand timing default valuesDavid Müller (ELSOFT AG)2010-12-06-3/+9
| | | | | | | The attached patch fixes wrong timing default values and adds the possibility to specify board specific timing value in the board config file. Signed-off-by: David Mueller <d.mueller@elsoft.ch>
* cfi_flash: fix bug introduced while recent change to flash_get_size()Anatolij Gustschin2010-11-28-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ec50a8e389863ac35bfd9d9a2e8b30187318e59e "cfi_flash: handle 'chip size exceeds address window' situation" added 3rd argument to flash_get_size() but didn't fix all the function calls from the board specific code. Many boards have their own flash_get_size() definitions in the board code and use them there, but some boards (e.g. tqm834x, tqm85xx, pdm360ng) use flash_get_size() from the cfi_flash.c driver. The bug shows up if the value of the "max_size" argument (which is not defined when calling the function with two arguments) happens to be less than "info->size". In this case on the affected boards we end up with a bank of reduced size and in the worst case might even be not able to update U-Boot or to boot the kernel from flash: => fli Bank # 1: CFI conformant FLASH (32 x 16) Size: 0 kB in 1 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 3 ms, buffer size: 64 bytes Sector Start Addresses: F0000000 RO Bank # 2: CFI conformant FLASH (32 x 16) Size: 128 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 3 ms, buffer size: 64 bytes Sector Start Addresses: F8000000 F8040000 F8080000 F80C0000 F8100000 F8140000 F8180000 F81C0000 F8200000 F8240000 ... E.g., updating U-Boot is not possible now: => protect off ${u-boot_addr} +${u-boot_size} Error: end address (0xf007ffff) not in flash! Bad address format => era ${u-boot_addr} +${u-boot_size} Error: end address (0xf007ffff) not in flash! Bad address format This patch removes the 3rd argument of flash_get_size() again and sets "max_size" in the function itself instead of passing it as a function argument. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* ppc4xx/NAND: Reduce size of NAND SPL imageStefan Roese2010-11-27-2/+2
| | | | | | | | | | This is needed for the canyonlands_nand build target. Without it the resulting image won't fit into 4k. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* sf: ramtron: new spi fram driverReinhard Meyer2010-11-10-0/+329
| | | | | | | Supports most types that support Read-Id and the FM25H20. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk2010-10-29-12/+13
|\
| * Add generic support for samsung s3c2440C Nauman2010-10-28-12/+13
| | | | | | | | | | | | | | | | | | | | | | This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman <cnauman@diagraph.com> Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOCWolfgang Denk2010-10-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | By now, the majority of architectures have working relocation support, so the few remaining architectures have become exceptions. To make this more obvious, we make working relocation now the default case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* | cfi_flash: handle 'chip size exceeds address window' situationIlya Yanok2010-10-23-5/+23
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | On some boards we have flash mapped high in the address space with considerably small window (say 0xFE000000 and 32MB). When we install bigger chip (say 64MB) on such a board strange things happen (flash_write() doesn't work at all, for ex). That's because cfi_flash driver doesn't care about window size at all. Of course, cleanest solution would probably be to just extend address window to be able to map the whole flash but for legacy/compatibility reasons some people prefer just truncate the flash size and never use the upper part. This patch adds an option for cfi_flash driver to handle this situation properly. To achieve this we add the new function cfi_flash_bank_size() which can be provided by the board code and weak-aliased to default implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES array if it's defined or 0 otherwise (the last case is added for compatibility). If non-zero flash bank size is provided and detected chip size is bigger than provided address window size the warning will be displayed and flash chip will be truncated. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Changed cfi_flash_bank_size() return type to unsigned long to match caller function. Signed-off-by: Wolfgang Denk <wd@denx.de>
* davinci_nand, trivial : use symbolic ECC start commandBen Gardiner2010-10-17-1/+2
| | | | | | | | | | | The ECC calculations were started by writing 1 << 13 to the nand FCR register; that value is also defined as DAVINCI_NANDFCR_4BIT_CALC_START in emif_defs.h. This patch substitutes the macro DAVINCI_NANDFCR_4BIT_CALC_START for the magic number '1 << 13'. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* sf: turn probe switch into a lookup tableReinhard Meyer2010-10-12-44/+82
| | | | | | | | | | This allows for arbitrarily long manufacturer ids following the JEDEC standard of 0x7f continuation bytes. It also makes adding new entries easier as it's just one element in an array. The downside is that it increases code size a bit, but we're talking ~50 bytes. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2010-10-12-1/+1
|\
| * cfi_flash: Fix "Unknown FLASH" error messageJohn Schmoller2010-10-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a CFI flash chip could not be detected an error message similar to the following would be printed on bootup: FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 0 MB The printf incorrectly converted the flash size into megabytes. This patch fixes the printing of the flash size in megabytes: FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 16 MB Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | mtd: OneNAND: add support for OneNAND manufactured by NumonyxEnric Balletbo i Serra2010-10-11-0/+1
| | | | | | | | | | | | | | | | | | | | This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
* | Followup fixes on the mtdparts spread patchsetScott Wood2010-10-11-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | Consolidate some code in mtd_get_len_incl_bad(), and fix a condition where a valid partition could be reported as truncated if it has a good block at the end of the device (unlikely, since the BBT is usually there). Fix mid-block declarations in net_part_size(). Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca>
* | mtd: add an mtd method for get_len_incl_bad()Ben Gardiner2010-10-11-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic to 'spread' mtd partitions needs to calculate the length in the mtd device, including bad blocks. This patch introduces a new function, mtd_get_len_incl_bad that can return both the length including bad blocks and whether that length was truncated on the device. This new function will be used by the mtdparts spread command later in this series. The definition of the function is #ifdef'd out in configurations that do not use the new 'mtdparts spread' command. Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca> CC: Scott Wood <scottwood@freescale.com>
* | nand: remove dead code and suspend/resumeScott Wood2010-10-11-324/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of the several "#if 0" sections that were keeping around Linux code that isn't relevant to U-Boot. Besides cluttering the code, these sections make tracking upstream changes harder, rather than easier. It's easy to discard obviously irrelevant diff hunks that patch rejects, but it's not as easy to notice hunks that apply cleanly to the #if 0 section, but *are* relevant to U-Boot and require modification elsewhere. Also remove suspend/resume, as this is not applicable to U-Boot. Removal saves 232 bytes on powerpc. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
* | nand erase: .spread, .part, .chip subcommandsScott Wood2010-10-11-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html, Michele De Candia posted a patch to not count bad blocks toward the requested size to be erased. This is desireable when you're passing in something like $filesize, but not when you're trying to erase a partition. Thus, a .spread subcommand (named for consistency with http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced to make explicit the user's desire to erase for a given amount of data, rather than to erase a specific region of the chip. While passing $filesize to "nand erase" is useful, accidentally passing something like $fliesize currently produces quite unpleasant results, as the variable evaluates to nothing and U-Boot assumes that you want to erase the entire rest of the chip/partition. To improve the safety of the erase command, require the user to make explicit their intentions by using a .part or .chip subcommand. This is an incompatible user interface change, but keeping compatibility would eliminate the safety gain, and IMHO it's worth it. While touching nand_erase_opts(), make it accept 64-bit offsets and sizes, fix the percentage display when erase length is rounded up, eliminate an inconsistent warning about rounding up the erase length which only happened when the length was less than one block (rounding up for $filesize is normal operation), and add a diagnostic if there's an attempt to erase beginning at a non-block boundary. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
* | nand util: read/write: accept unaligned lengthScott Wood2010-10-11-37/+63
|/ | | | | | | | | | | | | | | | The underlying code in nand_base.c already supports non-page-aligned reads and writes, but the block-skipping wrapper code did not. With block skipping, an unaligned start address is not useful since you really want to be starting at the beginning of a partition -- or at least that's where you want to start checking for blocks to skip, but we don't (yet) support that. So we still require the start address to be aligned. An unaligned length, though, is useful for passing $filesize to the read/write command, and handling it does not complicate block skipping. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
* sf: spansion: add support for S25FL032P partsDavid Jander2010-10-06-0/+9
| | | | | | | | This patch introduces an extra mask-field in spansion_spi_flash_params to support flash chips with 1-byte extended ID (like the S25FL032P). Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* sf: spansion: fixing erasing when sector size >64KiBMarc-André Hébert2010-10-06-4/+3
| | | | | | | | | | | The spansion_erase currently only works when the sector size is 64KB. cmd[1] should contain the higher 8 bit of the 24 bit address of the sector to be erased. Currently it is holding the sector index to be erased which happens to be the same thing when the sector size is 64KB. Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* sf: winbond: add support W25Q64 partsGraeme Smecher2010-10-06-0/+9
| | | | | | | | | Adds support for Winbond's W25Q64 SPI flash. These devices are used on (among others) Xilinx' SP601 and SP605 Spartan-6 evaluation boards. Tested with "sf" commands. Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'next' of /home/wd/git/u-boot/nextWolfgang Denk2010-09-28-27/+17
|\ | | | | | | | | | | | | Conflicts: include/ppc4xx.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * ppc4xx: Move ppc4xx headers to powerpc include directoryStefan Roese2010-09-23-1/+1
| | | | | | | | | | | | | | | | | | This patch moves some ppc4xx related headers from the common include directory (include/) to the powerpc specific one (arch/powerpc/include/asm/). This way to common include directory is not so cluttered with files. Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: Remove uneccessary #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECTStefan Roese2010-09-20-9/+1
| | | | | | | | | | | | | | Now that the defines are moved to header files we don't need this conditional compilation any more. Remove it. Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: Simplify dynamic flash bank number detectionStefan Roese2010-09-20-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch simplifies the use of CONFIG_SYS_MAX_FLASH_BANKS_DETECT. By moving these optional variables and defines into the common code, board specific code is minimized. Currently only the following board use this feature: APC405, IDS8247, TQM834x And IDS8247 doesn't seem to really need this feature, since its not updating the bank number variable at all. So this patch removes the definition of CONFIG_SYS_MAX_FLASH_BANKS_DETECT from this board port. This new framework will be used by the upcoming lwmon5 update as well. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
| * cfi_flash: Add weak default for cfi_flash_bank_addr()Stefan Roese2010-09-20-4/+9
| | | | | | | | | | | | | | | | | | | | | | cfi_flash_bank_addr(int bank_nr) returns the base addresses of the requested bank. Introducing this weak default enables boards to override this functions with a board specific version when required. This feature will be used in the lwmon5 board update, supporting runtime detection of 2 board revisions with different flash layouts. Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: Simplify flash_get_info()Stefan Roese2010-09-20-2/+2
| | | | | | | | | | | | | | | | | | | | This patch removes an unecessary check in the return statement. This is not needed, since "info" is initializes to NULL. And "info" will not be written to again, if the flash address is not found. Additionally "info" is not initialized to "0" but to "NULL". Signed-off-by: Stefan Roese <sr@denx.de>
* | Fix "ubi part" cmd re-entrancyKarl Beldan2010-09-27-0/+1
|/ | | | | | | | | Commit 2ee951ba (UBI: Enable re-initializing of the "ubi part" command) reset mtd_devs in ubi_exit() but missed ubi_init()'s failure path. Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* nand/davinci: make sure ECC calculation has really startedWolfram Sang2010-09-13-1/+14
| | | | | | | | | | Due to a register glitch (result code <4 might show up right after the start-calculation-bit was set), make sure the ECC has really started. See 1c3275b656045aff9a75bb2c9f3251af1043ebb3 in the kernel. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Sandeep Paulraj <s-paulraj@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiWolfgang Denk2010-09-09-3/+6
|\
| * mtd: nand: supress 'unknown NAND' warning if no nand is foundSteve Sakoman2010-09-08-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This printk was added recently and results in ugly output on systems with no NAND: NAND: nand_get_flash_type: unknown NAND device: Manufacturer ID: 0x00, Chip ID: 0x00 0 MiB instead of: NAND: 0 MiB Signed-off-by: Steve Sakoman <steve@sakoman.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk2010-09-08-3/+3
|\ \ | |/ |/|
| * ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5PMinkyu Kang2010-08-26-3/+3
| | | | | | | | | | | | | | Use the same configuration around S5P SoCs. (s5pc100, s5pc110, s5pc210 and so on) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.Philippe De Muyter2010-08-18-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have "ported" U-boot to a in house made board with Numonyx Axcell P33/P30 256-Mbit 65nm flash chips. After some time :( searching for bugs in our board or soft, we have discovered that those chips have a small but annoying bug, documented in "Numonyx Axcell P33/P30 256-Mbit Specification Update" It states : When customer uses [...] block unlock, the block lock status might be altered inadvertently. Lock status might be set to either 01h or 03h unexpectedly (00h as expected data), which leads to program/erase failure on certain blocks. A working workaround is given, which I have applied and tested with success : Workaround: If the interval between 60h and its subsequent command can be guaranteed within 20us, Option I is recommended, otherwise Option II (involves hardware) should be selected. Option I: The table below lists the detail command sequences: Command Data bus Address bus Remarks Sequence 1 90h Block Address Read Lock Status 2 Read Block Address + 02h (2)(3) (1) 3 60h Block Address (2)(3) (1) Lock/Unlock/RCR Configuration 4 D0h/01h/03h Block Address Notes: (1) Block Address refers to RCR configuration data only when the 60h command sequence is used to set RCR register combined with 03h subsequent command. (2) For the third and fourth command sequences, the Block Address must be the same. (3) The interval between 60h command and its subsequent D0h/01h/2Fh/03h commands should be less than 20us. And here is a log comparison of a simple (destructive) flash test without and with the workaround. diff without-numonyx-workaround.log with-numonyx-workaround.log -U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:07:47) +U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:25:19) CPU: Freescale MCF5484 CPU CLK 200 MHz BUS CLK 100 MHz Board: Macq Electronique ME2060 I2C: ready DRAM: 64 MiB FLASH: 32 MiB In: serial Out: serial Err: serial Net: FEC0, FEC1 -> flinfo Bank # 1: CFI conformant FLASH (16 x 16) Size: 32 MB in 259 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8922 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Sector Start Addresses: FE000000 RO FE008000 RO FE010000 RO FE018000 RO FE020000 RO FE040000 RO FE060000 RO FE080000 RO FE0A0000 RO FE0C0000 RO ... FFF80000 RO FFFA0000 RO FFFC0000 RO FFFE0000 RO -> protect off all Un-Protect Flash Bank # 1 ................... done -> erase all Erase Flash Bank # 1 ................... done -> cp.b 1000000 fe000000 2000000 -Copy to Flash... Flash not Erased +Copy to Flash... done -> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: Cleanup flash_print_info()Stefan Roese2010-08-18-24/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does the following: - Extract code to detect if sector is erased into function sector_erased(). - Because of this, we don't have variable declarations inside the sector loop in flash_print_info() - Change "return" to "break" in the "if (ctrlc()) statement: This fixes a problem with the resulting output. Before this patch the output was: Sector Start Addresses: FC000000 FC020000 FC040000 => With this patch it is now: Sector Start Addresses: FC000000 FC020000 FC040000 => Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
* | Fix printing & reading of 16-bit CFI device identifiersPhilippe De Muyter2010-08-18-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix reading and printing of CFI flashes 16-bit devices identifiers Nowadays CFI flashes have a 16-bit device identifier. U-boot still print them and read them as if they were only 8-bit wide. Fix that. Before: Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1B After: Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x881B Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: flinfo: allow user interrupt in flash print info fnKim Phillips2010-08-18-0/+2
| | | | | | | | | | | | | | flashes getting larger, users more impatient. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Rename getenv_r() into getenv_f()Wolfgang Denk2010-08-04-1/+1
|/ | | | | | | | | | | | | | | | | | | While running from flash, i. e. before relocation, we have only a limited C runtime environment without writable data segment. In this phase, some configurations (for example with environment in EEPROM) must not use the normal getenv(), but a special function. This function had been called getenv_r(), with the idea that the "_r" suffix would mean the same as in the _r_eentrant versions of some of the C library functions (for example getdate vs. getdate_r, getgrent vs. getgrent_r, etc.). Unfortunately this was a misleading name, as in U-Boot the "_r" generally means "running from RAM", i. e. _after_ relocation. To avoid confusion, rename into getenv_f() [as "running from flash"] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* 83xx/85xx/86xx: LBC register cleanupBecky Bruce2010-07-16-11/+7
| | | | | | | | | | | | | | | | | | | | | Currently, 83xx, 86xx, and 85xx have a lot of duplicated code dedicated to defining and manipulating the LBC registers. Merge this into a single spot. To do this, we have to decide on a common name for the data structure that holds the lbc registers - it will now be known as fsl_lbc_t, and we adopt a common name for the immap layouts that include the lbc - this was previously known as either im_lbc or lbus; use the former. In addition, create accessors for the BR/OR regs that use in/out_be32 and use those instead of the mismash of access methods currently in play. I have done a successful ppc build all and tested a board or two from each processor family. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-07-14-8/+8
|\
generated by cgit v1.1 at 2024-12-26 23:20:25 +0000