summaryrefslogtreecommitdiff
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeLines
* mmc: omap_hsmmc: Update pbias programmingBalaji T K2013-06-10-11/+9
| | | | | | | Update pbias programming sequence for OMAP5 ES2.0/DRA7 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-30-868/+536
|\ | | | | | | | | | | Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
| * powerpc/esdhc: Correct judgement for DATA PIO modeHaijun.Zhang2013-05-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The logic for the whether to configure for polling or DMA was mistakenly reversed in this patch: Commit 7b43db92110ec2f15c5f7187a165f2928464966b drivers/mmc/fsl_esdhc.c: fix compiler warnings Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> CC: Sun Yusong-R58495 <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * mmc: update Faraday FTSDC010 for rw performanceKuo-Jung Su2013-05-15-688/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Faraday FTSDC010 is a MMC/SD host controller. Although there is already a driver in current u-boot release, which is modified from eSHDC and contributed by Andes Tech. Its performance is too terrible on Faraday A36x SoC platforms, so I turn to implement this new version of driver which is 10+ times faster than the old one. It's carefully designed to be compatible with Andes chips, so it should be safe to replace it. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Andy Fleming <afleming@gmail.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * drivers/mmc: move spl_mmc.c to common/splYing Zhang2013-05-15-140/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc85xx repuires a special layout on the memory device that is connected to the eSDHC controller interface. But the file spl_mmc.c didn't handle this specfic case, there needs a special treatmen, in the powerpc drictory. So, there is no longer to keep spl_mmc.c on mpc85xx, CONFIG_SPL_FRAMEWORK is not set. When CONFIG_SPL_MMC_SUPPORT is set and CONFIG_SPL_FRAMEWORK is not set, there was an error in drivers/mmc/spl_mmc.c: drivers/mmc/libmmc.o:(.got2+0x8): undefined reference to `spl_image'. Now, the solution is to move the file "spl_mmc.c" to directory "common/spl". Signed-off-by: Ying Zhang <b40530@freescale.com>
| * mmc: fsl_esdhc: Use calloc()Fabio Estevam2013-05-06-2/+1
| | | | | | | | | | | | | | A malloc() followed by memset() can be simply replaced by calloc(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * mmc: sdhci: return error when failed add_sdhci().Jaehoon Chung2013-05-06-4/+2
| | | | | | | | | | | | | | | | | | If failed the add_host(), it is reasonable that return value of add_sdhci(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * sdhci: Add sdhci support for spear devicesVipin Kumar2013-05-06-0/+45
| | | | | | | | | | | | | | Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * davinci, mmc: Added a delay reading ext CSD registerDavide Bonfanti2013-05-06-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this additional delay, some eMMC don't negotiate properly bus width Tested on: - Toshiba THGBM2G8D8FBAIB - Toshiba THGBM4G4D1HBAR - Micron MTFC4GMVEA (the one giving the problem) - Hynix H26M64002BNR - SanDisk SDIN5E1-32G Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * mmc: Split device init to decouple OCR-polling delayChe-Liang Chiou2013-05-06-32/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of time that MMC driver spends on initializing a device is polling OCR (operation conditions register). To decouple this polling loop, device init is split into two parts: The first part fires the OCR query command, and the second part polls the result. So the caller is now no longer bound to the OCR-polling delay; he may fire the query, go somewhere and then come back later for the result. To use this, call mmc_set_preinit() on any device which needs this. This can save significant amounts of time on boot (e.g. 200ms) by hiding the MMC init time behind other init. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | mmc: atmel_mci: add mmc card supportBo Shen2013-05-12-1/+4
| | | | | | | | | | | | | | add mmc card support with atmel mci driver Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | mmc: atmel_mci: using IP version for different settingBo Shen2013-05-12-4/+38
| | | | | | | | | | | | | | | | | | Using IP version for different setting - Higher version supports 8bit mode - Higher version bus width setting is different Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-4/+4
|\ \
| * | palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic functionNishanth Menon2013-05-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs, rename twl6035_mmc1_poweron_ldo by a more generic palmas_mmc1_poweron_ldo function. Signed-off-by: Nishanth Menon <nm@ti.com>
| * | twl6035: rename to palmasNishanth Menon2013-05-10-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs Rename twl6035 to palmas to allow reuse across multiple current and future platforms As part of this change, change the CONFIG_TWL6035_POWER to CONFIG_PALMAS_POWER and update usage of header file accordingly. Signed-off-by: Nishanth Menon <nm@ti.com>
* | | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/mtd/nand/mxc_nand_spl.c include/configs/m28evk.h
| * | | imx: Move some header files from arch-mxs to imx-commonStefan Roese2013-04-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following headers are moved to a i.MX common location: - regs-common.h - regs-apbh.h - regs-bch.h - regs-gpmi.h - dma.h This way this header can be re-used also by other i.MX platforms. For example the i.MX6 which will need it for the upcoming NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | | | Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-20/+23
|\ \ \ \ | |_|/ / |/| | / | | |/ | |/|
| * | part/dev_desc: Add log2 of blocksize to block_dev_desc data structEgbert Eich2013-05-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | log2 of the device block size serves as the shift value used to calculate the block number to read in file systems when implementing avaiable block sizes. It is needed quite often in file systems thus it is pre-calculated and stored in the block device descriptor. Signed-off-by: Egbert Eich <eich@suse.com>
| * | mmc: Define a constant for the maximum block sizeSimon Glass2013-05-01-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | The number 512 appears quite a bit in the mmc code. Add a constant for this so that it can be used here and in other parts of the code (e.g. SPL code which loads from mmc). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@google.com>
| * | spl_mmc: cleanup variable typesPeter Korsgaard2013-05-01-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | block_read returns unsigned long, so it doesn't make sense to check for < 0. and neither does marking the header structure as const and then casting away the constness to load data into it. Also cleanup some unneeded pointer casting while we're at it. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | mmc: Add support for Xilinx Zynq sdhci controllerMichal Simek2013-04-30-0/+41
|/ / | | | | | | | | | | | | Add support for SD, MMC and eMMC card on Xilinx Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | mmc: check the revision for sd3.0Jaehoon Chung2013-04-17-0/+2
| | | | | | | | | | | | | | | | Support to check whether the SD3.0 or not. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Rommel Custodio <sessyargc@gmail.com>
* | mmc: support the correct card version for eMMCJaehoon Chung2013-04-17-0/+18
|/ | | | | | | | | | | eMMC vesrion is supported up to v4.5. But bootloader isn't saw the exact eMMC version. After applied this patch, if use the mmcinfo command, then can see the exactly mmc version. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Rommel Custodio <sessyargc@gmail.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-14-5/+3
|\
| * fsl_esdhc: Fix DMA transfer completion waiting loopAndrew Gabbasov2013-04-14-2/+1
| | | | | | | | | | | | | | | | | | | | | | Rework the waiting for transfer completion loop condition to continue waiting until both Transfer Complete and DMA End interrupts occur. Checking of DLA bit in Present State register looks not needed in addition to interrupts status checking, so it can be removed from the condition. Also, DMA Error condition is added to the list of data errors, checked in the loop. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * fsl_esdhc: flush cache after IO completionEric Nelson2013-04-14-3/+2
| | | | | | | | | | | | | | | | | | The cache should invalidate the read buffer for the SD card interface after the transfer complete, not command-complete. Tested-by: Andrew Gabbasov <Andrew_Gabbasov@mentor.com> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-0/+7
|\ \ | |/
| * mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a boardAbbas Raza2013-04-03-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maximum bus width supported by some i.MX6 boards is not 8bit like others. In case where both host controller and card support 8bit transfers, they agree to communicate on 8bit interface while some boards support only 4bit interface. Due to this reason the mmc 8bit default mode fails on these boards. To rectify this, define maximum bus width supported by these boards (4bit). If max_bus_width is not defined, it is 0 by default and 8bit width support will be enabled in host capabilities otherwise host capabilities are modified accordingly. It is tested with a MMCplus card. Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com> cc: stefano Babic <sbabic@denx.de> cc: Andy Fleming <afleming@gmail.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
* | ARM: bcm2835: fix get_timer() to return msStephen Warren2013-04-04-2/+3
| | | | | | | | | | | | | | | | | | | | Apparently, CONFIG_SYS_HZ must be 1000. Change this, and fix the timer driver to conform to this. Have the timer implementation export a custom API get_timer_us() for use by the BCM2835 MMC API, which needs us resolution for a HW workaround. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-3/+5
|\ \
| * | mmc:sdhci:fix: Change default interrupts enabled at SDHCI initializationŁukasz Majewski2013-03-12-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes sdhci_init()'s behavior to NOT enable all interrupt sources by default. Moreover interrupt signaling has been disabled. This patch do not enable interrupts which aren't served in u-boot (they are defined at sdhci.h but NOT used elsewhere): - SDHCI_INT_CARD_INSERT, SDHCI_INT_CARD_REMOVE, SDHCI_BUS_POWER, SDHCI_INT_CARD_REMOVE, SDHCI_INT_CARD_INT Special care shall be put on SDHCI_INT_CARD_INT, which indicates interrupt generated by SD card. According to "SD Host Controller Simplified Spec. ver 3.00" when bit 8 (Card Interrupt Status Enable) at "Normal Interrupt Status Enable Register" (offset 0x34) is set, the card interrupt detection is started. Then eMMC card may cause the SD controller to set this bit and then this interrupt is passed to booted OS and might cause kernel crash. To sum up: - Only enable interrupts, which are served at u-boot - This cleanup as a side effect fixes SDHCI's CARD INTERRUPT problem at Linux kernel (versions 3.6+, sdhci controller) - Keep masked bits at "Normal Interrupt Signal Enable Register" (0x38h) Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Andy Fleming <afleming@freescale.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be usedPeter Korsgaard2013-03-24-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Gets rid of warnings from omap_gpio: ERROR : check_gpio: invalid GPIO -1 (and undefined behaviour as the -1 error code is interpreted as gpio value) Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
* | | mmc: mmc_getcd/getwp: use sensible defaultsPeter Korsgaard2013-03-24-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Let mmc_getcd() return true and mmc_getwp() false if mmc driver doesn't provide handlers for them. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> [trini: Add braces around first if test in each case to fix warning] Signed-off-by: Tom Rini <trini@ti.com>
* | | mmc: add bcm2835 driverStephen Warren2013-03-20-0/+190
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a simple driver for the BCM2835's SD controller. Workarounds are implemented for: * Register writes can't be too close to each-other in time, or they will be lost. * Register accesses must all be 32-bit, so implement custom accessors. This code was extracted from: git://github.com/gonzoua/u-boot-pi.git master which was created by Oleksandr Tymoshenko. Portions of the code there were obviously based on the Linux kernel at: git://github.com/raspberrypi/linux.git rpi-3.6.y commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. swarren changed the following for upstream: * Removed hack udelay()s in bcm2835_sdhci_raw_writel(); setting SDHCI_QUIRK_WAIT_SEND_CMD appears to solve the issues. * Remove register logging from read*/write* functions. * Sort out confusion with min/max_freq values passed to add_sdhci(). * Use more descriptive variable names and calculations in IO accessors. * Simplified and commented twoticks_delay calculation. * checkpatch fixes. Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Andy Fleming <afleming@gmail.com>
* | Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-15-58/+168
|\ \
| * | mmc: Tegra: Add SD bus power/voltage function and MMC pad init call.Tom Warren2013-03-14-8/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra30 requires the SD Bus Voltage & Power bits be set in the SD Power Control register. Tegra20 works w/o them set, but do it anyway for those SoCs as it's part of the SD spec. Also call a common board pad init routine (pad_init_mmc) in mmc_reset(), used by Tegra30 only for now. Note that Tegra20 SD/MMC HW differs enough from Tegra20 that a new compatible entry is used in the fdt compat_names/id tables. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * | Tegra: MMC: Add DT support to MMC driver for all T20 boardsTom Warren2013-03-14-58/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. Tested on Seaboard, fully functional. Tamonten boards (medcom-wide, plutux, and tec) use a different/new dtsi file w/common settings. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-15-16/+4
|\ \ \ | |/ / |/| |
| * | mxs: mmc: spi: dma: Better wrap the MXS differencesMarek Vasut2013-03-07-16/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch streamlines the differences between the MX23 and MX28 by implementing a few helper functions to handle different DMA channel mapping, different clock domain for SSP block and fixes a few minor bugs. First of all, the DMA channel mapping is now fixed in dma.h by defining the actual channel map for both MX23 and MX28. Thus, MX23 now does no longer use MX28 channel map which was wrong. Also, there is a fix for MX28 DMA channel map, where the last four channels were incorrect. Next, because correct DMA channel map is in place, the mxs_dma_init_channel() call now bases the channel ID starting from SSP port #0. This removes the need for DMA channel offset being added and cleans up the code. For the same reason, the SSP0 offset can now be used in mxs_dma_desc_append(), thus no need to adjust dma channel number in the driver either. Lastly, the SSP clock ID is now retrieved by calling mxs_ssp_clock_by_bus() which handles the fact that MX23 has shared SSP clock for both ports, while MX28 has per-port SSP clock. Finally, the mxs_ssp_bus_id_valid() pulls out two implementations of the same functionality from MMC and SPI driver into common code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* | Merge u-boot/master into u-boot-ti/masterTom Rini2013-03-11-16/+52
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
| * | blackfin: bf60x: add rsi/sdh supportSonic Zhang2013-03-04-16/+52
| |/ | | | | | | | | | | | | | | Add rsi/sdh support for bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* | ARM: OMAP4+: Make control module register structure genericLokesh Vutla2013-03-11-15/+10
| | | | | | | | | | | | | | | | | | | | | | | | A seperate omap_sys_ctrl_regs structure is defined for omap4 & 5. If there is any change in control module for any of the ES versions, a new structure needs to be created. In order to remove this dependency, making the register structure generic for all the omap4+ boards. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* | omap_hsmmc: add driver check for write protectionNikita Kiryanov2013-03-08-2/+12
| | | | | | | | | | | | | | | | Add check for write protection in omap mmc driver. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
* | mmc: add support for write protectionNikita Kiryanov2013-03-08-0/+30
| | | | | | | | | | | | | | Add generic mmc write protection functionality. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* | omap_hsmmc: implement driver check for card detectionNikita Kiryanov2013-03-08-2/+35
| | | | | | | | | | | | | | Implement driver check for card detection. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* | omap_hsmmc: introduce omap_hsmmc_data structNikita Kiryanov2013-03-08-10/+18
| | | | | | | | | | | | | | | | | | | | Currently there's no appropriate place to store driver specific data because the pointer that is meant for that (priv) is being used to store the base address of mmc registers. Introduce a new struct for storing driver specific data. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | omap_hsmmc: fix out of bounds array accessNikita Kiryanov2013-03-08-1/+1
|/ | | | | | | | | | There are 3 MMC/SD/SDIO controllers in OMAP SoCs, but only 2 structs are defined for devices. This leads to data being written outside of array bounds on systems that use all 3 controllers. Update hsmmc_dev array to the correct size. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-12-41/+61
|\
| * mxs: mmc: Fix the MMC driver for MX23Marek Vasut2013-01-28-5/+22
| | | | | | | | | | | | | | | | | | | | The MX23 has different layout of DMA channels. Fix the MMC driver to support MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-01 02:37:24 +0000