summaryrefslogtreecommitdiff
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeLines
* sunxi: mmc: set transfer timeout according to byte_cnt.Yousong Zhou2015-08-31-2/+4
| | | | | | | | | | | Originally a timeout value of 2 seconds was used regardless of the size of data to be transfered. This prevented slow devices from working correctly while there was no much gain for faster devices, e.g. it takes 3708ms for a transfer of uImage of size 1899008 bytes. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: pxa: mmc: clean-up include file orderMarcel Ziswiler2015-08-24-5/+3
| | | | | | | Cleaning up order of include files by sorting them alphabetically keeping in mind to leave common.h on top. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2015-08-13-22/+47
|\
| * mmc_spi: Big-endian supportYoshinori Sato2015-08-13-5/+5
| | | | | | | | | | | | | | Currently implement always swap for big-endian value. So doesn't work big-endian environment. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
| * dw_mmc: Calculate dwmmc FIFO threshold size if not providedSimon Glass2015-08-13-2/+8
| | | | | | | | | | | | | | | | | | We can calculate this. Add code to do this if it is not provided. panto: prefix changed to dw_mmc to make things easier to grep Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
| * mmc: dw_mmc: Avoid using printf() for errorsSimon Glass2015-08-11-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | The dw_mmc driver uses printf() in various places. These bloat the code and cause problems for SPL. Use debug() where possible and try to return a useful error code instead. panto: Small rework to make it apply against top of tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
| * mmc: dw_mmc: Improve handling of data transfer failureMarek Vasut2015-08-11-7/+9
| | | | | | | | | | | | | | | | | | | | | | In case the data transfer failure happens, instead of returning immediatelly, make sure the DMA is disabled, status register is cleared and the bounce buffer is stopped. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
| * mmc: dw_mmc: Zap endless timeoutMarek Vasut2015-08-11-2/+17
| | | | | | | | | | | | | | | | | | | | Endless timeouts are bad, since if we get stuck in one, we have no way out. Zap this one by implementing proper timeout. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
| * mmc: dw_mmc: Stop bounce buffer even in case of failureMarek Vasut2015-08-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The driver didn't stop the bounce buffer in case a data transfer failed. This would lead to memory leakage if the communication between the CPU and the card is unreliable. Add the missing call to stop the bounce buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
* | mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xxNikita Kiryanov2015-08-12-2/+2
| | | | | | | | | | | | | | | | | | Enable 8bit interface on HSMMC2 for am43xx to support 8bit eMMC chips. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xxNikita Kiryanov2015-08-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | The CMD(DAT) lines reset procedure described in the OMAP4(AM335x, OMAP5, DRA7xx) TRMs is also necessary for AM43XX. Enable it in the driver. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.Peter Griffin2015-08-12-0/+57
|/ | | | | | | | | This patch adds the glue code for hi6220 SoC which has 2x synopsis dw_mmc controllers. This will be used by the hikey board support in subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* exynos: Correct return value in exynos_mmc_init()Simon Glass2015-08-05-1/+1
| | | | | | This function should return 0 on success, not 1. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* fsl_esdhc.c: Always make check_and_invalidate_dcache_range availableTom Rini2015-08-02-2/+0
| | | | | | | This function is called from esdhc_send_cmd so we need it available to everyone. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-0/+8
|\
| * mmc:fsl_esdhc invalidate dcache before readPeng Fan2015-07-26-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DCIMVAC is upgraded to DCCIMVAC for the individual processor (Cortex-A7) that the DCIMVAC is executed on. We should follow the linux dma follow. Before DMA read, first invalidate dcache then after DMA read, invalidate dcache again. With the DMA direction DMA_FROM_DEVICE, the dcache need be invalidated again after the DMA completion. The reason is that we need explicity make sure the dcache been invalidated thus to get the DMA'ed memory correctly from the physical memory. Any cache-line fill during the DMA operations such as the pre-fetching can cause the DMA coherency issue, thus CPU get the stale data. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-28-1/+11
| | | | | | | | | | | | | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | mmc: tegra: Build warning fixes for 64-bitThierry Reding2015-07-27-3/+3
| | | | | | | | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański2015-07-24-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | mmc: Protect `mmc_initialize` from initialising mmc multiple timesDaniel Kochmański2015-07-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | `mmc_initialize` might be called multiple times leading to the mmc-controllers being initialised twice, and initialising the `mmc_devices` list head twice which may lead to memory leaks. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | dm: test: Add a test for the mmc uclassSimon Glass2015-07-21-0/+26
| | | | | | | | | | | | | | Add a test to confirm that we can probe this device. Since there is no MMC stack support in sandbox at present, this is as far as the test goes. Signed-off-by: Simon Glass <sjg@chromium.org>
* | mmc: Add debug() output on read errorsSimon Glass2015-07-21-2/+6
| | | | | | | | | | | | Allow read errors to be diagnosed more easily. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: mmc: Add an MMC uclassSimon Glass2015-07-21-0/+48
|/ | | | | | | Add basic support for MMC, providing a uclass which can set up an MMC device. This allows MMC drivers to move to using driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* mmc: sdhci.c: Add config option to use a fixed buffer for transfersStefan Roese2015-07-10-0/+15
| | | | | | | | | | | | | | | | | | | | While implementing SDIO/MMC SPL booting for the Marvell Armada 38x, the following problem occured. The SPL runs in internal SRAM which is the L2 cache locked to memory. When the MMC buffers now are located on the stack (or bss), the SDIO controller (SDHCI) can't write into this L2 cache memory. This patch introduces a method to use a fixed buffer that will be used for all transfers by defining CONFIG_FIXED_SDHCI_ALIGNED_BUFFER. This way, the board can use this buffer address located in SDRAM for all transfers. This solves this SPL problem on the A38x and should only be used in the SPL U-Boot version. Tested for SPL booting on Marvell Armada 38x DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* mmc: sdhci: Use timer based timeout detection in sdhci_send_command()Stefan Roese2015-07-10-5/+5
| | | | | | | | | | | | | The loop counter based timeout detection does not work on the Armada 38x based board (DB-88F6820-GP). At least with dcache enabled a timeout is detected. Without dcache enabled, the timeout does not occur. Increasing the loop counter solves this issue. But a better solution is to use a timer based timeout detection instead. This patch now implements this timer based detection. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* mmc: bcm2835_sdhci: Restore original delay behaviorMarek Vasut2015-06-25-2/+2
| | | | | | | | | | | | | | | | | | Patch 33fe2fb8df01647f97a7bce96a1c7781a7f6d253 titled "mmc: bcm283x: Remove get_timer_us() from mmc driver" incorrectly replaced ad-hoc get_timer_us() function with a plain get_timer(). The get_timer() operates in mSec units instead of uSec though, which caused very slow operation of the driver. Restore the original behavior of the driver, but avoid get_timer_us() and use timer_get_us() instead. The later is part of the standard API. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jakub Kiciński <moorray3@wp.pl> Cc: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Jakub Kicinski <kubakici@wp.pl>
* mmc_write.c: Make mmc_berase do 32bit safe 64bit mathTom Rini2015-06-18-1/+11
| | | | | | | | | | | | | | We want to see if the requested start or total block count are unaligned. We discard the whole numbers and only care about the remainder. Update the code to use div_u64_rem here and add a comment. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Bernhard Nortmann <bernhard.nortmann@web.de> Reported-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: mmc: Enable pull-up on card-detect gpio pinHans de Goede2015-06-04-1/+3
| | | | | | | On some boards we need to enable the internal pull-up te reliable detect that no card is inserted. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge git://git.denx.de/u-boot-mpc85xxTom Rini2015-05-05-1/+87
|\
| * mmc: fsl_esdhc: Add peripheral clock supportYangbo Lu2015-05-04-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | The SD clock could be generated by platform clock or peripheral clock for some platforms. This patch adds peripheral clock support for T1024/T1040/T2080. To enable it, define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * mmc: fsl_esdhc: Add adapter card type identification supportYangbo Lu2015-05-04-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | Add adapter card type identification support by reading FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function, define CONFIG_FSL_ESDHC_ADAPTER_IDENT. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> [York Sun: resolve conflicts in README.fsl-esdhc] Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2015-05-05-69/+74
|\ \
| * | ARM: mmc: bcm283x: Remove get_timer_us() from mmc driverMarek Vasut2015-05-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The get_timer_us() function is something which is no longer existing in case we use generic timer framework, so replace it with get_timer(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org>
| * | tegra: mmc: Set the removable flag correctlySimon Glass2015-05-05-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | If the mmc device is non-removable (as indicated by the device tree), set the flag so that users of the device know. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
| * | mmc: bcm2835_sdhci: Use calloc to allocate bcm2835_sdhci_hostAlexander Stein2015-05-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | We need to clear the allocated memory explicitly as the included struct sdhci_host has function pointers. Those are compared to NULL to test if this (optional) feature is supported. Leaving them undefined let u-boot jump to arbitrary memory. Signed-off-by: Alexander Stein <alexanders83@web.de>
| * | mmc: fsl_esdhc: update eMMC44 adapter card erase timeoutYangbo Lu2015-05-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale eMMC44 adapter card uses Micron N2M400FDB311A3CF eMMC memory. According to the silicon datasheet, secure erase timeout is 600ms. So increase erase timeout value from 250ms to 600ms. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com>
| * | mmc: sdhci: add timeout setting for response busy commandKevin Liu2015-05-05-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Timeout interrupt also work for response busy command(R1b) like cmd38/cmd6. So need to set it accordingly. Current code only set timeout for data command. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | mmc: remove the MMC_MODE_HC flagRob Herring2015-05-05-20/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | High capacity support is not a host capability, but a device capability that is queried via the OCR. The flag in the operating conditions request argument can just be set unconditionally. This matches the Linux implementation. [panto] Hand merged and renumbering MMC_MODE_DDR_52MHz. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
| * | mmc: Fix splitting device initializationAndrew Gabbasov2015-05-05-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting part of device initialization sets the init_in_progress flag only if the MMC card did not yet come to ready state and needs to continue polling. If the card is SD or if the MMC card became ready quickly, the flag is not set and (if using pre-initialization) the starting phase will be re-executed from mmc_init function. Set the init_in_progress flag in all non-error cases. Also, move flags setting statements around so that the flags are not set in error paths. Also, IN_PROGRESS return status becomes unnecessary, so get rid of it. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * | mmc: Restructure polling loops to avoid extra delaysAndrew Gabbasov2015-05-05-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The polling loops in sd_send_op_cond and mmc_complete_op_cond functions check the ready flag state at the end of the loop, that is after executing a delay inside the loop, which, in case of exiting with no error, is not needed. Also, one of these loops, as well as the loop in mmc_send_status, have the delay just before exiting on timeout conditions. Restructure all these loops to check the respective conditions before making a delay for the next loop pass, and to appropriately exit without the delay. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * | mmc: Continue polling MMC card for OCR only if it is still not readyAndrew Gabbasov2015-05-05-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some MMC cards come to ready state quite quickly, so that the respective flag appears to be set in mmc_send_op_cond already. In this case trying to continue polling the card with CMD1 in mmc_complete_op_cond is incorrect and may lead to unpredictable results. So check the flag before polling and skip it appropriately. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * | mmc: Do not pass external mmc_cmd structure to mmc_send_op_cond_iter()Andrew Gabbasov2015-05-05-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous change to use 'ocr' structure field for storing send_op_cond command response also stopped using command response directly outside of mmc_send_op_cond_iter(). Now it becomes possible to use command structure in mmc_send_op_cond_iter() locally, removing a necessity to pass it as an argument from the caller. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * | mmc: Avoid extra duplicate entry in mmc device structureAndrew Gabbasov2015-05-05-6/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The 'op_cond_response' field in mmc structure contains the response from the last SEND_OP_COND MMC command while making iterational polling of the card. Later it is copied to 'ocr' field, designed to contain the OCR register value, which is actually the same response from the same command. So, these fields have actually the same data, just in different time periods. It's easier to use the same 'ocr' field in both cases at once, without temporary using of the 'op_cond_response' field. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
* | sunxi: mmc: Fix card-detect gpio handling to work with the driver-modelHans de Goede2015-05-04-3/+4
| | | | | | | | | | | | | | | | | | The driver-model gpio functions may return another value then -1 as error, make the sunxi mmc code properly handle this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig boolHans de Goede2015-05-04-2/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | sun6i and newer (derived) SoCs such as the sun8i-a23, sun8i-a33 and sun9i have a various things in common, like having separate ahb reset control registers, the SID living inside the pmic, custom pmic busses, new style watchdog, etc. This commit introduces a new hidden SUNXI_GEN_SUN6I Kconfig bool which can be used to check for these features avoiding the need for an ever growing list of "#if defined CONFIG_MACH_SUN?I" conditionals as we add support for more "new style" sunxi SoCs. Note that this commit changes the behavior of the gmac and hdmi code for sun8i and the upcoming sun9i devices. This does not matter as sun8i does not have gmac nor hdmi, and sun9i has new hardware-blocks for these so the old code will not work there. Also this is intentional as if a sun8i / sun9i variant which does use the old hwblocks shows up then the GEN_SUN6I code paths will be the right ones to use. For completeness this also adds a SUNXI_GEN_SUN4I bool for A10/A13/A20. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* zynqmp: sdhci: Remove the quirk SDHCI_QUIRK_NO_CDSiva Durga Prasad Paladugu2015-04-29-1/+1
| | | | | | | | Remove the quirk SDHCI_QUIRK_NO_CD as it is not required. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ls2085a: esdhc: Add esdhc support for ls2085aYangbo Lu2015-04-23-2/+34
| | | | | | | This patch adds esdhc support for ls2085a. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* ARM: bcm283x: move SoC headers to mach-bcm283x/include/machMasahiro Yamada2015-03-28-2/+2
| | | | | | | | Move arch/arm/include/asm/arch-bcm283x/* -> arch/arm/mach-bcm283x/include/mach/* Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* mv_sdhci: fix warnings on 64-bit buildsRob Herring2015-03-18-2/+2
| | | | | | | | Change addresses to unsigned long to be compatible with 64-bit builds. Regardless of fixing warnings, the device is still only 32-bit capable. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
generated by cgit v1.1 at 2024-12-22 16:54:16 +0000