summaryrefslogtreecommitdiff
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeLines
* powerpc/85xx: Add T4240RDB board supportChunhe Lan2014-05-13-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240RDB board Specification ---------------------------- Memory subsystem: 6GB DDR3 128MB NOR flash 2GB NAND flash Ethernet: Eight 1G SGMII ports Four 10Gbps SFP+ ports PCIe: Two PCIe slots USB: Two USB2.0 Type A ports SDHC: One SD-card port SATA: One SATA port UART: Dual RJ45 ports Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: fix CONFIG_SYS_QE_FMAN_FW_ADDR in T4240RDB.h]
* driver: Add support of image load for MMC & SPI in SPLPrabhakar Kushwaha2014-04-22-0/+26
| | | | | | | Add support of loading image, binary for MMC and SPI during SPL boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/mmc: fix compile warningsPrabhakar Kushwaha2014-04-22-1/+5
| | | | | | | | | | | | | | Fix following compile warnings fsl_esdhc_spl.c: In function 'mmc_boot': fsl_esdhc_spl.c:35:10: warning: unused variable 'byte_num' [-Wunused-variable] fsl_esdhc_spl.c:35:7: warning: unused variable 'i' [-Wunused-variable] fsl_esdhc_spl.c:34:8: warning: unused variable 'val' [-Wunused-variable] fsl_esdhc_spl.c:33:6: warning: unused variable 'blklen' [-Wunused-variable] fsl_esdhc_spl.c:105:7: warning: 'tmp_buf' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-506/+605
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * mmc:eSDHC: Workaround for data timeout issue on Txxx SoCHaijun.Zhang2014-04-02-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. The Data timeout counter value in eSDHC_SYSCTL register is not working as it should be, so add quirks to enable this workaround to fix it to the max value 0xE. 2. Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to enable its workaround. * Update of patch for change mmc interface by Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: fsl_esdhc: add controller reset in case of data related errors tooAndrew Gabbasov2014-04-02-27/+36
| | | | | | | | | | | | | | | | The controller reset is performed now if command error occurs. This commit adds the reset for the case of data related errors too. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: fsl_esdhc: fix calculation of timeout for data transactionsAndrew Gabbasov2014-04-02-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculation of the timeout value should be based on actual clock value, written to controller registers. Since mmc->tran_speed is either the maximum allowed speed, or the preliminary value, that is be not yet set to registers, the actual timeout, taken by the controller, based on its clock settings, may be much longer than expected, based on mmc->tran_speed value. In particular it happens at early initialization stage, when typical value of mmc->tran_speed is 20MHz or 26MHz, while actual clock setting, configured in the controller, is 400kHz. It's more correct to use mmc->clock value for timeout calculation instead. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: Add 'mmc rst-function' sub-commandTom Rini2014-04-02-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Some eMMC chips may need the RST_n_FUNCTION bit set to a non-zero value in order for warm reset of the system to work. Details on this being required will be part of the eMMC datasheet. Also add using this command to the dra7xx README. * Whitespace fix by panto Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: sh_mmcif: Fix warning by unused variableNobuhiro Iwamatsu2014-04-02-2/+1
| | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: sh_mmcif: Fix compile errorNobuhiro Iwamatsu2014-04-02-1/+1
| | | | | | | | | | | | | | | | | | | | BY commit "mmc: Split mmc struct, rework mmc initialization (v2)", sh_mmcif has compile error. This fixes compile error. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * blackfin: mmc: Correct mmc_host_is_spi and bfin_sdh.cTom Rini2014-03-28-1/+1
| | | | | | | | | | | | | | | | In the recent mmc cleanup, the mmc_host_is_spi macro was broken and bfin_sdh.c had mmc->bus_width turned into mmc_bus_width(mmc), both of which were incorrect. Signed-off-by: Tom Rini <trini@ti.com>
| * mmc: Split mmc struct, rework mmc initialization (v2)Pantelis Antoniou2014-03-24-385/+403
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way that struct mmc was implemented was a bit of a mess; configuration and internal state all jumbled up in a single structure. On top of that the way initialization is done with mmc_register leads to a lot of duplicated code in drivers. Typically the initialization got something like this in every driver. struct mmc *mmc = malloc(sizeof(struct mmc)); memset(mmc, 0, sizeof(struct mmc); /* fill in fields of mmc struct */ /* store private data pointer */ mmc_register(mmc); By using the new mmc_create call one just passes an mmc config struct and an optional private data pointer like this: struct mmc = mmc_create(&cfg, priv); All in tree drivers have been updated to the new form, and expect mmc_register to go away before long. Changes since v1: * Use calloc instead of manually calling memset. * Mark mmc_register as deprecated. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: Convert mmc struct's name array to a pointerPantelis Antoniou2014-03-24-15/+15
| | | | | | | | | | | | | | Using an array is pointless; even more pointless (and scary) is using sprintf to fill it without a format string. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: Remove ops from struct mmc and put in mmc_opsPantelis Antoniou2014-03-24-113/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the in-structure ops and put them in mmc_ops with a constant pointer to it. This makes the mmc structure smaller as well as conserving code space (in theory). All in-tree drivers are converted as well; this is done in a single patch in order to not break git bisect. Changes since V1: Fix compilation b0rked issue on omap platforms where OMAP_GPIO was not set. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | drivers:mmc:sdhci: enable support for DTPiotr Wilczek2014-03-12-0/+129
|/ | | | | | | | | This patch enables support for device tree for sdhci driver. Non DT case is still supported. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* mmc: zynq: Add OF initialization supportMichal Simek2014-03-04-0/+29
| | | | | | Enable initialize sdhci from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-26-0/+135
|\ | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/armv7/config.mk board/ti/am43xx/mux.c include/configs/am43xx_evm.h Signed-off-by: Tom Rini <trini@ti.com>
| * mmc: kona: Add Kona mmc driverDarwin Rambo2014-02-22-0/+135
| | | | | | | | | | | | | | | | Add support for the Kona SDHCI found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Tim Kryger <tkryger@linaro.org>
* | blackfin: Add <asm/clock.h> to numerous driversTom Rini2014-02-20-0/+1
|/ | | | | | | | | With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-17-0/+9
|\
| * mmc: tegra: support Tegra124Stephen Warren2014-02-03-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra124's MMC controller is very similar to earlier SoC generations, and can be supported by the same driver. However, there are some non-backwards-compatible HW differences, and hence a new DT compatible value must be used to describe the HW. This patch updates the driver to support that new compatible value. That said, the HW differences are only relevant when enabling certain high-performance transfer modes. Since the driver is currently very simple and doesn't enable those modes, we don't actually need to address any of these HW differences in the code yet, hence the simple nature of this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | cmd_mmc.c: Drop open/close mmc sub-commandsTom Rini2014-02-07-65/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The open and close mmc sub-commands implement a hard-coded set of values specific to the SMDK5250 platform. Remove these commands as what they did can be done instead with a series of mmc dev / bootpart / bootbus commands instead now. Cc: Amar <amarendra.xt@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | cmd_mmc.c: Add bootbus mmc sub-commandTom Rini2014-02-07-0/+21
| | | | | | | | | | | | | | | | | | | | Add a bootbus sub-command to the mmc command to allow for setting the boot_bus_width, reset_boot_bus_width and boot_mode fields of BOOT_BUS_WIDTH (EXT_CSD[177]). Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | cmd_mmc.c: Add 'partconf' command to mmcTom Rini2014-02-07-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a partconf sub-command to the mmc command to allow for setting the boot_ack, boot_partition and partition_access fields of PARTITION_CONFIG (formerly BOOT_CONFIG, EXT_CSD[179]). Part of this requires changing the check for 'part' from an strncmp to a strcmp, like the rest of the sub-commands. Cc: Andy Fleming <afleming@gmail.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | mmc: Enabled quirk SDHCI_QUIRK_BROKEN_R1BSiva Durga Prasad Paladugu2014-02-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | As per the below commit "mmc: sdhci: add the quirk for broken r1b response" (sha1: 3a6383207be3f71b39004e64464a6e99290b16fa) need to add quirk SDHCI_QUIRK_BROKEN_R1B, when the response type is R1b. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | MMC: DWMMC: Correct the CLKDIV register valueRajeshwari S Shinde2014-02-07-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the divider value written to CLKDIV register. Since SDCLKIN is divided inside controller by the DIVRATIO value set in the CLKSEL register, we need to use the same output clock value to calculate the CLKDIV value. as per user manual: cclk_in = SDCLKIN / (DIVRATIO + 1) Input parameter to mmc_clk is changed to dwmci_host, since we need the same to read DWMCI_CLKSEL register. This improves the read timing values for channel 0 on SMDK5250 from 0.288sec to 0.144sec Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | mmc: set rca to 1 for MMC cardsStephen Warren2014-02-07-1/+1
|/ | | | | | | | | | U-Boot currently sets MMC cards' RCA register to 0. This value is reserved according to the specification. Use a value of 1 instead, just like the Linux kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* drivers: delete unused header filesMasahiro Yamada2014-01-24-138/+0
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* esdhc: Detecting 8 bit width before mmc initializationHaijun.Zhang2014-01-22-0/+5
| | | | | | | | | | The upper 4 data signals of esdhc are shared with spi flash. So detect if the upper 4 pins are assigned to esdhc before enable sdhc 8 bit width. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
* esdhc: Workaround for card can't be detected on T4240QDSHaijun.Zhang2014-01-22-0/+4
| | | | | | | | | | | | | | | Card detection pin is ineffective on T4240QDS Rev1.0. There are two cards can be connected to board. 1. eMMC card is built-in board, can not be removed. so For eMMC card it is always there. 2. Card detecting pin is functional for SDHC card in Rev2.0. This workaround force sdhc driver scan and initialize the card regardless of whether the card is inserted or not in case Rev1.0. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: dwmmc: mode change to 0644Minkyu Kang2014-01-14-0/+0
| | | | | | Don't know why but, file permission was changed Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGAChin Liang See2014-01-09-0/+69
| | | | | | | | | | | | | To add the DesignWare MMC driver support for Altera SOCFPGA. It required information such as clocks and bus width from platform specific files (SOCFPGA handoff files) Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: add setdsr supportMarkus Niebel2014-01-09-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC and the SD-Card specifications describe the optional SET_DSR command. During measurements at our lab we found that some cards implementing this feature having really strong driver strengts per default. This can lead to voltage peaks above the specification of the host on signal edges for data sent from a card to the host. Since availability of a given card type may be shorter than the time a certain hardware will be produced it is useful to have support for this command (Alternative would be changing termination resistors and adapting the driver strength of the host to the used card.) Following proposal for an implementation: - new field that reflects CSD field DSR_IMP in struct mmc - new field for design specific DSR value in struct mmc - board code can set DSR value in mmc struct just after registering an controller - mmc_startup sends the the stored DSR value before selecting a card, if DSR_IMP is set Additionally the mmc command is extended to make is possible to play around with different DSR values. The concept was tested on a i.MX53 based platform using a Micron eMMC card where the default DSR is 0x0400 (12mA) but in our design 0x0100 (0x0100) were enough. To use this feature for instance on a mx53loco one have to add a call to mmc_set_dsr() in board_mmc_init() after calling fsl_esdhc_initialize() for the eMMC. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: Minor cleanup of sdhci.cDarwin Rambo2014-01-09-13/+19
| | | | | | | | Fixup prints to show where the print is done from, and a few minor formatting/grammar issues. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controllerAlexey Brodkin2014-01-09-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bounce buffer implementation takes care of proper data buffer alignemt and correct flush/invalidation of data cache at once so we no longer depend on input data variety and make sure CPU and MMC controller deal with expected data in case of enabled data cache. Bounce buffer requires to add its definition (CONFIG_BOUNCE_BUFFER) in board configuration, otherwise corresponding library won't be compiled and linker will fail to build resulting executable. Difference since v1 - fixed compile-time warning with type casting to "void *": Slight edit to remove UTF8 characters in the commit message. Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> ==== passing argument 2 of 'bounce_buffer_start' discards 'const' qualifier from pointer target type ==== Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Amar <amarendra.xt@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Andy Fleming <afleming@gmail.com>
* mmc/dwmmc: Using calloc instead mallocChin Liang See2014-01-08-2/+2
| | | | | | | | | | | | | | | To enhance the SDMMC DesignWare driver to use calloc instead of malloc. This will avoid the incident that uninitialized members of mmc structure are later used for NULL comparison. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Andy Fleming <afleming@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: add Faraday FTSDC021 SDHCI controller supportKuo-Jung Su2013-12-08-0/+34
| | | | | | | | | | | Faraday FTSDC021 is a controller which is compliant with SDHCI v3.0, SDIO v2.0 and MMC v4.3. However this driver is only verified with SD memory cards. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> CC: Andy Fleming <afleming@gmail.com>
* powerpc: mmc: Add corenet devices support in esdhc splPriyanka Jain2013-12-08-0/+5
| | | | | | | | | | | | | | | Existing eSDHC SPL framework assumes booting from sd-image with boot_format header which contains final u-boot Image offset and size. No such header is present in case of corenet devices like T1040 as corenet deivces use PBI-RCW based intialization. So, for corenet deives, SPL bootloader use values provided at compilation time. These values can be defined in board specific config file. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc/dwmmc: modify FIFO threshold only if value explicitly setAlexey Brodkin2013-12-08-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | If platform provides "host->fifoth_val" it will be used for initialization of DWMCI_FIFOTH register. Otherwise default value will be used. This implementation allows: * escape unclear and recursive calculations that are currently in use * use whatever custom value for DWMCI_FIFOTH initialization if any particular SoC requires it Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Amar <amarendra.xt@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Andy Fleming <afleming@freescale.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: dw_mmc: remove the exynos specific code in dw-mmc.cJaehoon Chung2013-12-08-10/+16
| | | | | | | | | | | dw-mmc.c is the general driver file. So, remove the exynos specific code at dw-mmc.c. Instead, exynos specific cod can be move into exynos-dw_mmc.c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-47/+24
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* powerpc/esdhc: Add 3.3v voltage support in esdhc capacity registerHaijun.Zhang2013-10-31-0/+6
| | | | | | | | | | T4240QDS eSDHC host capabilities reigster should have VS33 bit define. Add quirk CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 to deal with capacity missing Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* esdhc: memset mmc struct before putting into useHaijun.Zhang2013-10-31-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct mmc should be clear to all '0' after malloc to avoid unexpect variable value. Like mmc->has_init = xxx. In this case mmcinfo will believe the card had been initialized before and skip the initialization. Test on P5040 and T4240, Error Log: => mmcinfo Device: FSL_SDHC Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 0 Rd Block Len: 0 MMC version 0.0 High Capacity: No Capacity: 0 Bytes Bus Width: 0-bit => Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com> Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* Powerpc/esdhc: Add simple description of esdhc registerHaijun.Zhang2013-10-31-37/+37
| | | | | | | Add some descriptions for esdhc register for easily using. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* powerpc/esdhc: Map register for eSDHC Host Controller V3.0Haijun.Zhang2013-10-31-2/+14
| | | | | | | | | eSDHC host controller has new register to support SD Spec 3.0. And the according host controller version was Freescale eSDHC Version 3.0. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* DWMMC: SMDK5420: Disable SMU for eMMCRajeshwari Shinde2013-10-31-0/+14
| | | | | | | | | | | | SMDK5420 has a new Security Management Unit added for dwmmc driver, hence, configuring the control registers to support booting via eMMC. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: sdhci: Avoid commands errors by simple timeout adaptation.Przemyslaw Marczak2013-10-31-7/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | Old command timeout value was too small and it caused I/O errors which led to uncompleted read/write/erase operations and filesystem errors. Timeout adaptation fixes this issue. Changes in sdhci_send_command() function: - change timeout variable to static - increase default command timeout to 100 ms - add definition of max command timeout value, which can be redefined in each board config file - wait for card ready state for max defined time if it doesn't exceed defined maximum or return COMM_ERR Once successfully increased timeout value will be used in next function call. This fix was tested on Goni, Trats, Trats2 boards by testing UMS on MMC storage. Changes v2: - move global variable cmd_timeout into function sdhci_send_command() - change condition "==" to ">=" when comparing time with timeout - print information about timeout increasing and card busy timeout Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: dw_mmc: change the callback function name.Jaehoon Chung2013-10-31-4/+4
| | | | | | | | To prevent the confusion, use the get_mmc_clk() instead of mmc_clk(). get_mmc_clk() is more exactly name. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: Fix erase_grp_size for partitioned cardOliver Metz2013-10-31-4/+13
| | | | | | | | EXT_CSD_ERASE_GROUP_DEF is lost every time after a reset or power off. Set it if device has enhanced partitions. Signed-off-by: Oliver Metz <oliver@freetz.org> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-02-0/+2
|\
generated by cgit v1.1 at 2024-12-24 08:11:20 +0000