summaryrefslogtreecommitdiff
path: root/drivers/mmc/s5p_sdhci.c
Commit message (Collapse)AuthorAgeLines
* mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1BJaehoon Chung2016-08-05-1/+1
| | | | | | | | | Unset the SDHCI_QUIRK_BROKEN_R1B for exynos SoC. (Tested on Exynos4 Boards.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* s5p sdhci: call pinmux for card's gpio pins before use themPrzemyslaw Marczak2015-11-02-7/+7
| | | | | | | | | | | | | | | | | | | The SD card detection depends on checking one pin state. But the pin was configured after card was detected, which is wrong. This commit fixes this, by moving call to pinmux before use the pin. Tested-on: Odroid U3 and Odroid X2. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: more debug and cleanup in do_sdhci_init()Tobias Jakobi2015-10-13-9/+11
| | | | | | | | | Add more debug printfs in do_sdhci_init() for calls that can potentially fail. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: be more verbose in process_nodes()Tobias Jakobi2015-10-13-5/+7
| | | | | | | | | In case sdhci_get_config() or do_sdhci_init() fail, show the error code that was returned. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: Fix passing of errors in exynos_mmc_init()Tobias Jakobi2015-10-13-6/+12
| | | | | | | | | | | | | | | | exynos_mmc_init() always returns zero, so for the caller it looks like it never fails. Correct this by returning the error code of process_nodes(). For process_nodes() do something similar and return early when do_sdhci_init() fails. v2: Only fail in process_nodes() if we fail on all available nodes. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: Properly zero initialize host in s5p_sdhci_init()Tobias Jakobi2015-10-13-2/+2
| | | | | | | | | This makes sure that setting the host_caps in s5p_sdhci_core_init() doesn't operate on potentially uninitialized memory. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* exynos: Correct return value in exynos_mmc_init()Simon Glass2015-08-05-1/+1
| | | | | | This function should return 0 on success, not 1. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* mmc: remove the MMC_MODE_HC flagRob Herring2015-05-05-1/+0
| | | | | | | | | | | | | High capacity support is not a host capability, but a device capability that is queried via the OCR. The flag in the operating conditions request argument can just be set unconditionally. This matches the Linux implementation. [panto] Hand merged and renumbering MMC_MODE_DDR_52MHz. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
* mmc: s5p: properly mask SELBASECLKMatt Reimer2015-03-18-1/+1
| | | | | | | | Properly mask SELBASECLK by using an actual mask rather than the number of bits to shift in order to create the mask. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
* dm: mmc: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-12/+8
| | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* mmc: s5p: set SD detection pin as inputPrzemyslaw Marczak2014-10-27-1/+1
| | | | | | | The SD Card slot detection pin should be configured as input. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: exynos: Make sure that GPIOs are requestedSimon Glass2014-10-22-1/+6
| | | | | | | | | | With driver model GPIOs must be requested before use. Make sure this is done correctly. (Note that the soft SPI part of universal is omitted, since this driver is about to be replaced with a driver-model-aware version) Signed-off-by: Simon Glass <sjg@chromium.org>
* samsung: Enable device tree for s5p_goniSimon Glass2014-10-08-2/+0
| | | | | | | | | Change this board to add a device tree. This also adds a pinmux header file although it is not used as yet. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* mmc: s5p_sdhci: add the s5p_sdhci_core_init functionJaehoon Chung2014-05-16-25/+17
| | | | | | | | | | | To reuse the code, added the s5p_sdhci_core_init function. Before applied this patch, didn't use the 8-bit mode at exynos baord. Because it didn't set "MMC_MODE_8BIT". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* drivers:mmc:sdhci: enable support for DTPiotr Wilczek2014-03-12-0/+129
| | | | | | | | | This patch enables support for device tree for sdhci driver. Non DT case is still supported. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoCJaehoon Chung2013-09-17-1/+3
| | | | | | | | | Samsung SoC is supported the WIDE8, even if Controller version is v2.0. So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-13/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* mmc: sdhci: return error when failed add_sdhci().Jaehoon Chung2013-05-06-2/+1
| | | | | | | | | If failed the add_host(), it is reasonable that return value of add_sdhci(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmdTushar Behera2012-10-22-1/+2
| | | | | | | | | | | | | | | | | MMC host controller requires a delay between every sdhci_send_cmd() execution. In s5p_mmc driver (s5p_sdhci replaces this driver), a delay of 1000us was provided after every mmc_send_cmd() call. Adding a quirk in current sdhci driver to replicate the behaviour. Without this delay, MMC initialization on Origen board fails with following error messages. Timeout for status update! mmc fail to send stop cmd Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mmc: s5p_sdhci: add the set_mmc_clk for cmu controlJaehoon Chung2012-09-05-0/+3
| | | | | | | | Samsung SoC use the cmu control to set clock. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mmc: s5p_sdhci: fixed wrong function argumentJaehoon Chung2012-09-05-3/+2
| | | | | | | | | | Useless code is removed, and get buswidth value. buswidth value will be used to choice the 4bit or 8bit. (Now used 4bit mode in sdhci.c by default) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1BJaehoon Chung2012-09-05-6/+4
| | | | | | | | | | Samsung SoC is broken busy waiting for R1b type. And clk delay control value is modified the previosuly value. (that value used at the s5p_mmc.c) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mmc: support the sdhci instead of s5p_mmc for samsung-socJaehoon Chung2012-05-08-0/+98
In driver mmc, generic s5p_sdhci code is implemented. s5p_mmc file is dupulicated. we are good that use the generic sdhci. This patch supported the sdhci for Samsung-SoC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lei Wen<leiwen@marvell.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-11-07 11:28:16 +0000