summaryrefslogtreecommitdiff
path: root/drivers/misc
Commit message (Collapse)AuthorAgeLines
* MLK-10981 mxc: ocotp fix hole in shadow registersPeng Fan2015-05-29-5/+74
| | | | | | | | | | | | | | | | | | | | There is a hole in shadow registers address map of size 0x100 between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, we should account for this hole in address space. Similar hole exists between bank 14 and bank 15 of size 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. Note: iMX6SL has only 0-7 banks and there is no hole. Note: iMX6UL doesn't have this one. When reading, we use register offset, so need to account for holes to get the correct address. When writing, we use bank/word index, there is no need to account for holes, always use bank/word index from fuse map. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10178-5 ocotp:mxc add i.MX7D supportPeng Fan2015-04-29-2/+74
| | | | | | | | | | | | Ocotp of i.MX7D has different operation rule. This patch is to add support for i.MX7D ocotp. Note: DIV_ROUND is changed to DIV_ROUND_CLOSEST Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit d0c3564b6a0f430254edcd8db1f33588bbeccb08)
* fsl_sec_mon: Add driver for Security Monitor block of Freescalegaurav rana2015-03-05-0/+155
| | | | | | | | | | | | | The Security Monitor is the SOC’s central reporting point for security-relevant events such as the success or failure of boot software validation and the detection of potential security compromises. The API's for transition of Security states have been added which will be used in case of SECURE BOOT. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* dm: cros_ec: Convert to KconfigSimon Glass2015-02-19-1/+47
| | | | | | | | | Since both I2C and SPI are converted to Kconfig, we can convert cros_ec to Kconfig for these buses. LPC will need to wait until driver mode PCI is available. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Expand and complete Kconfig in drivers/Simon Glass2015-02-12-0/+9
| | | | | | | | Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: cros_ec: Convert cros_ec_i2c over to driver modelSimon Glass2015-01-29-53/+29
| | | | | | | Move this driver to use driver model and update the snow configuration to match. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: cros_ec_spi: Remove old pre-driver-model codeSimon Glass2015-01-29-49/+2
| | | | | | This is no-longer needed since all platforms use SPI for cros_ec. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: cros_ec: Don't require protocol 3 supportSimon Glass2015-01-29-4/+6
| | | | | | | | I2C is now deprecated on ARM platforms and there are no devices that use it with the v3 protocol. We can't require v3 support if we want to support I2C. Adjust the error handling to suit. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: spi: Move slave details to child platdataSimon Glass2015-01-29-19/+0
| | | | | | | | | | | | | | | | At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: cros_ec: Remove use of fdtdec GPIO supportSimon Glass2015-01-29-18/+6
| | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* i2c_eeprom: include <linux/err.h> to fix build errorMasahiro Yamada2015-01-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/misc/i2c_eeprom.c fails to build unless CONFIG_FIT_SIGNATURE is defined. CC drivers/misc/i2c_eeprom.o drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_read': drivers/misc/i2c_eeprom.c:15:10: error: 'ENODEV' undeclared (first use in this function) drivers/misc/i2c_eeprom.c:15:10: note: each undeclared identifier is reported only once for each function it appears in drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_write': drivers/misc/i2c_eeprom.c:21:10: error: 'ENODEV' undeclared (first use in this function) drivers/misc/i2c_eeprom.c:22:1: warning: control reaches end of non-void function [-Wreturn-type] drivers/misc/i2c_eeprom.c: In function 'i2c_eeprom_read': drivers/misc/i2c_eeprom.c:16:1: warning: control reaches end of non-void function [-Wreturn-type] make[2]: *** [drivers/misc/i2c_eeprom.o] Error 1 make[1]: *** [drivers/misc] Error 2 make: *** [drivers] Error 2 By the way, Sandbox (enabling CONFIG_FIT_SIGNATURE) is luckily working depending on it. Sandbox includes include/asm-generic/errno.h from include/errno.h from include/u-boot/rsa-checksum.h from include/image.h from include/common.h from drivers/misc/i2c_eeprom.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add a simple superio driver for SMSC LPC47MBin Meng2014-12-13-0/+34
| | | | | | | | | On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8) are provided by a superio chip connected to the LPC bus. We must program the superio chip so that serial ports are available for us. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: Add a simple EEPROM driverSimon Glass2014-12-11-0/+52
| | | | | | | | | | There seem to be a few EEPROM drivers around - perhaps we should have a single standard one? This simple driver is used for sandbox testing, but could be pressed into more active service. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: i2c: Add an I2C EEPROM simulatorSimon Glass2014-12-11-0/+171
| | | | | | | | | To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox. It supports reading and writing from a small data store. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* mxc_ocotp: Do not disable the OCOTP clock after every accessFabio Estevam2014-12-01-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Leave the OCOTP turned on, so that we subsequent access do not fail. After enabling the thermal driver on a mx6sxsabresd board: U-Boot 2015.01-rc1-18267-g99d4189-dirty (Nov 24 2014 - 12:59:01) CPU: Freescale i.MX6SX rev1.0 at 792 MHz CPU: Temperature 48 C Reset cause: POR Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller In: serial Out: serial Err: serial Net: (hang) As the thermal driver accesses the ocotp registers, its clock will be disabled afterwards. Then when the MAC address is read (also from ocotp registers) it will cause a hang. Do not disable the ocotp clock to prevent this problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
* mxs_ocotp: clear the error flag before initiating write operationHector Palacios2014-12-01-0/+2
| | | | | | | A previous operation may have set the error flag, which must be cleared before a new write operation can be issued. Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* mxs_ocotp: check for errors from the OTP controller after writingHector Palacios2014-12-01-0/+7
| | | | | | | | | The write operation may fail when trying to write to a locked area. In this case the ERROR bit is set in the CTRL register. Check for that condition and return an error. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* mxs_ocotp: prevent error path from returning successHector Palacios2014-12-01-4/+1
| | | | | | | | | | | | | | The code may goto 'fail' upon error with 'ret' variable set to an error code, but this variable was being overwritten by a final preparation function to restore the HCLK, so success was (in general) returned even after an error was hit previously. With this change, the function may now return success even if the final preparation function fails, but it's probably enough to print a message because (if successful) the real programming of the fuses has already completed. Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2014-11-24-0/+1
|\ | | | | | | | | | | | | Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
| * cros_ec: Fix uninitialised variable in cros_ec.cSimon Glass2014-11-22-0/+1
| | | | | | | | | | | | | | | | | | This fixes this cppcheck report: [drivers/misc/cros_ec.c:704]: (error) Uninitialized variable: req Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Wolfgang Denk <wd@denx.de>
* | linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* | replace DIV_ROUND with DIV_ROUND_CLOSESTMasahiro Yamada2014-11-20-2/+2
|/ | | | | | | | | | | | | The Linux-compatible macro DIV_ROUND_CLOSEST is a bit more flexible and safer than DIV_ROUND. For example, foo = DIV_ROUND_CLOSEST(x, y++) works expectedly, but foo = DIV_ROUND(x, y++) does not. (y is incremented twice.) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2014-10-23-2/+2
|\
| * x86: cros_ec: Update LPC driver for new cros_ec headerSimon Glass2014-10-22-2/+2
| | | | | | | | | | | | There was a minor rename of one of the defines, so update the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: exynos: cros_ec: Move cros_ec_spi to driver modelSimon Glass2014-10-22-9/+78
| | | | | | | | | | | | | | | | Adjust this driver to use driver model and move smdk5420 boards over to use it. Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: sandbox: cros_ec: Move sandbox cros_ec to driver moduleSimon Glass2014-10-22-5/+85
| | | | | | | | | | | | | | | | Adjust the sandbox cros_ec emulation driver to work with driver model, and switch over to driver model for sandbox cros_ec. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* | dm: cros_ec: Add support for driver modelSimon Glass2014-10-22-14/+117
|/ | | | | | | | Add support for driver model if enabled. This involves minimal changes to the code, mostly just plumbing around the edges. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-24-0/+0
| | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* cros_ec: Fix two bugs in the SPI implementationSimon Glass2014-08-06-2/+2
| | | | | | | | | | | An incorrect message version is passed to the EC in some cases and the parameters of one function are switched. Fix these problems. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* stdio: Pass device pointer to stdio methodsSimon Glass2014-07-23-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | At present stdio device functions do not get any clue as to which stdio device is being acted on. Some implementations go to great lengths to work around this, such as defining a whole separate set of functions for each possible device. For driver model we need to associate a stdio_dev with a device. It doesn't seem possible to continue with this work-around approach. Instead, add a stdio_dev pointer to each of the stdio member functions. Note: The serial drivers have the same problem, but it is not strictly necessary to fix that to get driver model running. Also, if we convert serial over to driver model the problem will go away. Code size increases by 244 bytes for Thumb2 and 428 for PowerPC. 22: stdio: Pass device pointer to stdio methods arm: (for 2/2 boards) all +244.0 bss -4.0 text +248.0 powerpc: (for 1/1 boards) all +428.0 text +428.0 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
* includes: move openssl headers to include/u-bootJeroen Hofstee2014-06-19-1/+1
| | | | | | | | | | | | commit 18b06652cd "tools: include u-boot version of sha256.h" unconditionally forced the sha256.h from u-boot to be used for tools instead of the host version. This is fragile though as it will also include the host version. Therefore move it to include/u-boot to join u-boot/md5.h etc which were renamed for the same reason. cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* driver/fsl_ifc: Add a function to finalize CS0 address bindingYork Sun2014-04-22-0/+7
| | | | | | | | | For fsl-lsch3 NOR flash boot, IFC CS0 needs to be binded with address within 32-bit at fist. After u-boot relocates to DDR, CS0 can be binded to higher address to support large space. Signed-off-by: York Sun <yorksun@freescale.com> CC: Prabhakar Kushwaha <prabhakar@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-arm into masterStefano Babic2014-04-04-165/+1180
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| * cros_ec: Implement I2C pass-throughSimon Glass2014-03-17-2/+268
| | | | | | | | | | | | | | | | | | The Chrome EC has a feature where you can access its I2C buses through a pass-through arrangement. Add a command to support this, and export the function for it also. Reviewed-by: Vadim Bendebury <vbendeb@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: sandbox: Add Chrome OS EC emulationSimon Glass2014-03-17-0/+576
| | | | | | | | | | | | | | | | Add a simple emulation of the Chrome OS EC for sandbox, so that it can perform various EC tasks such as keyboard handling. Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Correct comparison between signed and unsigned numbersSimon Glass2014-03-17-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to signed/unsigned comparison, '< sizeof(struct)' does not do the right thing, since if ec_command() returns a -ve number we will consider this be success. Adjust all comparisons to avoid this problem. This error was found with sandbox, which gives a segfault in this case. On ARM we may instead silently fail. We should also consider turning on -Wsign-compare to catch this sort of thing in future. Reviewed-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
| * cros_ec: spi: Add support for EC protocol version 3Randall Spangler2014-03-17-0/+36
| | | | | | | | | | | | | | | | | | Protocol version 3 will be attempted first; if the EC doesn't support it, u-boot will fall back to the old protocol version (2). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Add base support for protocol v3Simon Glass2014-03-17-1/+164
| | | | | | | | | | | | | | Protocol v2 was shipped with snow, link and spring. Protocol v3 is for pit and is targetted at SPI operation. Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Clean up multiple EC protocol supportRandall Spangler2014-03-17-44/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Version 1 protocols (without command version) were already no longer supported in cros_ec.c. This removes some dead code from the cros_ec_i2c driver. Version 2 protcols (with command version) are now called protocol_version=2, instead of cmd_version_is_supported=1. A subsequent change will introduce protocol version 3 for SPI. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Sync up with latest Chrome OS EC versionSimon Glass2014-03-17-16/+17
| | | | | | | | | | | | The EC messages have been expanded and some parts have been renamed. Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Move #ifdef to permit flash region accessSimon Glass2014-03-17-1/+2
| | | | | | | | | | | | | | Flash region access is not tied to having commands, so adjust the #ifdef to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Drop old EC version support from EC driverVadim Bendebury2014-03-17-89/+6
| | | | | | | | | | | | | | | | | | | | | | There is no need to support old style EC moving forward. Ultimately we should get rid of the check_version() API. For now just return error in case the EC does not seem to support the new API. Reviewed-by: Vadim Bendebury <vbendeb@google.com> Tested-by: Vadim Bendebury <vbendeb@google.com> Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * cros_ec: Add a function for decoding the Chrome OS EC flashmapSimon Glass2014-03-17-0/+50
| | | | | | | | | | | | | | | | In order to talk to the EC properly we need to be able to understand the layout of its internal flash memory. This permits emulation of the EC for sandbox, and also software update in a system with a real EC. Signed-off-by: Simon Glass <sjg@chromium.org>
* | ARM: mxs: Add OCOTP driverMarek Vasut2014-03-31-0/+312
|/ | | | | | | | | | | | Add yet another OCOTP driver for this i.MX family. This time, it's a driver for the OCOTP variant found in the i.MX23 and i.MX28. This version of OCOTP is too different from the i.MX6 one that I could not use the mxc_ocotp.c driver without making it into a big pile of #ifdef . This driver implements the regular fuse command interface, but due to the IP blocks' limitation, we support only READ and PROG functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-06-1/+12
|\ | | | | | | | | | | | | | | Conflicts: include/micrel.h The conflict above was trivial, caused by four lines being added in both branches with different whitepace.
| * arm: mx5: Add fuse supply enable in fsl_iimSergey Alyoshin2014-01-03-1/+12
| | | | | | | | | | | | | | Enable fuse supply before fuse programming and disable after. Signed-off-by: Sergey Alyoshin <alyoshin.s@gmail.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT nodeSimon Glass2013-12-09-2/+1
| | | | | | | | | | | | | | This allows us to put the SPI flash chip inside the SPI interface node, with U-Boot finding the correct bus and chip select automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2013-12-02-0/+165
|\ \
| * | Driver/IFC: Move Freescale IFC driver to a common driverYork Sun2013-11-25-0/+141
| |/ | | | | | | | | | | | | | | Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/misc and fix the header file includes. Signed-off-by: York Sun <yorksun@freescale.com>
* | gpio_led: add support for inverted polarityIgor Grinberg2013-11-25-2/+25
| | | | | | | | | | | | | | | | | | | | Some GPIO connected LEDs have inverted polarity. Introduce new config option: CONFIG_GPIO_LED_INVERTED_TABLE for the specifying the inverted GPIO LEDs list and add support for this in the gpio_led driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Ilya Ledvich <ilya@compulab.co.il>
generated by cgit v1.1 at 2024-11-02 10:51:35 +0000