summaryrefslogtreecommitdiff
path: root/drivers/gpio
Commit message (Collapse)AuthorAgeLines
* lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+301
| | | | | | This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* dm: tegra: Enable driver model in SPL and adjust the GPIO driverSimon Glass2015-03-04-16/+15
| | | | | | | | | | | Use the full driver model GPIO and serial drivers in SPL now that these are supported. Since device tree is not available they will use platform data. Remove the special SPL GPIO function as it is no longer needed. This is all in one commit to maintain bisectability. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm:gpio:mxc add DT supportPeng Fan2015-02-12-17/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch add DT support for mxc gpio driver. There are one place using CONFIG_OF_CONTROL macro. 1. The U_BOOT_DEVICES and mxc_plat array are complied out. To DT, platdata is alloced using calloc, so there is no need to use mxc_plat. The following situations are tested, and all work fine: 1. with DM, without DT 2. with DM and DT 3. without DM Since device tree has not been upstreamed, if want to test this patch. The followings need to be done. + pieces of code does not gpio_request when using gpio_direction_xxx and etc, need to request gpio. + move the gpio settings from board_early_init_f to board_init + define CONFIG_DM ,CONFIG_DM_GPIO and CONFIG_OF_CONTROL + Add device tree file and do related configuration in `make ARCH=arm menuconfig` These will be done in future patches by step. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Simon Glass <sjg@chromium.org>
* dm:gpio:mxc add a bank_index entry in platdataPeng Fan2015-02-12-8/+9
| | | | | | | | | | | Add a new entry in platdata structure and intialize bank_index in mxc_plat array. This new entry can avoid using `plat - mxc_plat` by using `plat->bank_index`. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Simon Glass <sjg@chromium.org>
* dm: Expand and complete Kconfig in drivers/Simon Glass2015-02-12-2/+5
| | | | | | | | Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* gpio: omap: Pass correct argument to _get_gpio_direction()Axel Lin2015-02-12-1/+1
| | | | | | | Pass bank rather than bank->base to _get_gpio_direction(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* gpio: at91: Fix getting address of private dataAxel Lin2015-02-12-5/+5
| | | | | | | | Use dev_get_priv() rather than dev_get_platdata() to get correct address of private data. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: exynos: Add a GPIO translation functionSimon Glass2015-01-29-1/+12
| | | | | | | | This deals with the polarity bit. It also changes the GPIO devices so that the correct device tree node is linked to each one. This allows us to use the new uclass phandle functionality to implement a proper GPIO binding. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: tegra: Add a GPIO translation functionSimon Glass2015-01-29-0/+18
| | | | | | | This deals with the polarity bit and selecting the correct bank device given a GPIO number. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add better functions to request GPIOsSimon Glass2015-01-29-2/+184
| | | | | | | | | | | | | | | | | | | | | | | At present U-Boot sort-of supports the standard way of reading GPIOs from device tree nodes, but the support is incomplete, a bit clunky and only works for GPIO bindings where #gpio-cells is 2. Add new functions to request GPIOs, taking full account of the device tree binding. These permit requesting a GPIO with a simple call like: gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN); This will request the GPIO, looking at the device's node which might be this, for example: cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>; The GPIO will be set to input mode in this case and polarity will be honoured by the GPIO calls. It is also possible to request and free a list of GPIOs. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add a driver GPIO translation methodSimon Glass2015-01-29-0/+16
| | | | | | | | | Only the GPIO driver knows about the full GPIO device tree binding used by a device. Add a method to allow the driver to provide this information to the uclass, including the GPIO offset within the device and flags such as the polarity. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add a native driver model APISimon Glass2015-01-29-71/+147
| | | | | | | | | | | | | | | | | | | | | | | So far driver model's GPIO uclass just implements the existing GPIO API. This has some limitations: - it requires manual device tree munging to support GPIOs in device tree (fdtdec_get_gpio() and friends) - it does not understand polarity - it is somewhat slower since we must scan for the GPIO device each time - Global GPIO numbering can change if other GPIO drivers are probed - it requires extra steps to set the GPIO direction and value The new functions have a dm_ prefix where necessary to avoid name conflicts but we can remove that when it is no-longer needed. The new struct gpio_desc holds all required information about the GPIO. For now this is intended to be stored by the client requesting the GPIO, but in future it might be brought into the uclass in some way. With these changes the old GPIO API still works, and uses the driver model API underneath. Signed-off-by: Simon Glass <sjg@chromium.org>
* sunxi: gpio: Add support for gpio pins on the AXP209 pmicHans de Goede2015-01-14-0/+30
| | | | | | | | | | | | | | | | | | | | | | Some boards use GPIO-s on the pmic, one example of this is the A13-OLinuXino board, which uses gpio0 of the axp209 for the lcd-power signal. This commit adds support for gpio pins on the AXP209 pmic, the sunxi_gpio.c changes are universal, adding gpio support for the other AXP pmics (when necessary) should be a matter of adding the necessary axp_gpio_foo functions to their resp. drivers, and add "#define AXP_GPIO" to their header file. Note this commit only adds support for the non device-model version of the gpio code, patches for adding support to the device-model version are very welcome. The string representation for these gpio-s is AXP0-#, the 0 in the AXP0 prefix is there in case we need to support gpio-s on more then 1 pmic in the future. At least A80 boards have 2 pmics, and we may end up needing to support gpio-s on both. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* mmc: sunxi: Fix misuse of gpio_direction_input()Axel Lin2015-01-14-1/+1
| | | | | | | | | | | | It does not make sense to make gpio_direction_input() return the gpio input status. The return value of gpio_direction_input() is inconsistent if CONFIG_DM_GPIO is defined. And we don't need to call gpio_direction_input() int sunxi_mmc_getcd(). Just init the gpio once in mmc_resource_init() is enough. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
* x86: ich6-gpio: Add Intel Tunnel Creek GPIO supportBin Meng2014-12-18-8/+12
| | | | | | | | | | | | Intel Tunnel Creek GPIO register block is compatible with current ich6-gpio driver, except the offset and content of GPIO block base address register in the LPC PCI configuration space are different. Use u16 instead of u32 to store the 16-bit I/O address of the GPIO registers so that it could support both Ivybridge and Tunnel Creek. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ich6-gpio: Move setup_pch_gpios() to board support codesBin Meng2014-12-13-51/+2
| | | | | | | | | Movie setup_pch_gpios() in the ich6-gpio driver to the board support codes, so that the driver does not need to know any platform specific stuff (ie: include the platform specifc chipset header file). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* gpio: intel_ich6: Set correct gpio output value in ich6_gpio_direction_output()Axel Lin2014-12-13-0/+2
| | | | | | | | Current code does not set gpio output value in ich6_gpio_direction_output(), fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2014-11-24-54/+187
|\ | | | | | | | | | | | | Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
| * dm: at91: Add driver model support for atmel GPIO driverSimon Glass2014-11-21-54/+187
| | | | | | | | | | | | | | Modify this driver to support driver model, with platform data required to determine the GPIOs that it controls. Signed-off-by: Simon Glass <sjg@chromium.org>
* | x86: ivybridge: Add support for early GPIO initSimon Glass2014-11-21-10/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When not relying on Coreboot for GPIO init the GPIOs must be set up correctly. This is currently done statically through a rather ugly method. As the GPIOs are figured out they can be moved to the device tree and set up as needed rather than all at the start. In this implementation, board files should call ich_gpio_set_gpio_map() before the GPIO driver is used in order to provide the GPIO information. We use the early PCI interface so that this driver can now be used before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: gpio: Add a function to read an ID from a list of GPIOsSimon Glass2014-11-21-0/+19
|/ | | | | | | | | | | For board IDs a common approach is to set aside several GPIOs for use in determining the board ID. This can provide information about board features and the revision. Add a function that turns a list of GPIOs into an integer by assigning each GPIO to a single bit. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: sunxi: Modify the GPIO driver to support driver modelSimon Glass2014-11-05-0/+170
| | | | | | | | | This adds driver model support to the sunxi GPIO driver, using the device tree to trigger binding of the driver. The driver will still operate without driver model too. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2014-10-26-690/+497
|\ | | | | | | | | | | | | | | | | Fix a trivial conflict over adding <dm.h> Conflicts: arch/arm/cpu/armv7/omap3/board.c Signed-off-by: Tom Rini <trini@ti.com>
| * dm: add entries to KconfigMasahiro Yamada2014-10-23-0/+6
| | | | | | | | | | | | | | | | Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO and CONFIG_DM_SPI. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: x86: Convert Intel ICH6 GPIO driver to use driver modelSimon Glass2014-10-23-130/+120
| | | | | | | | | | | | | | | | | | Convert over this driver, using device tree to pass in the required information. The peripheral is still probed, just the number of GPIO banks and their offsets is in the device tree (previously this was a table in the driver). Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: imx: Drop request()/free() in the driverSimon Glass2014-10-23-116/+0
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: exynos: Drop request()/free() in the driverSimon Glass2014-10-23-101/+0
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: rpi_b: Drop request()/free() in the driverSimon Glass2014-10-23-89/+0
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: omap3: Drop request()/free() in the driverSimon Glass2014-10-23-115/+1
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: tegra: Drop request()/free() in the driverSimon Glass2014-10-23-113/+0
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: Add gpio_requestf() helper for printf() stringsSimon Glass2014-10-23-0/+21
| | | | | | | | | | | | | | Add a helper which permits a printf()-style format string for the requester string. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: sandbox: Drop request()/free() in the driverSimon Glass2014-10-23-82/+0
| | | | | | | | | | | | | | Now that the uclass supports gpio_request/free() there is no need for the driver to implement it too. Drop this unnecessary code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: sandbox: Implement the remove() methodSimon Glass2014-10-23-0/+8
| | | | | | | | | | | | This method frees memory so we must make sure to implement it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: sandbox: Implement the get_function() methodSimon Glass2014-10-23-1/+8
| | | | | | | | | | | | | | Implement this method so that the 'gpio' command can do its job correctly. For sandbox we only support input and output states for a gpio. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: Move the function for getting GPIO status into the uclassSimon Glass2014-10-23-0/+39
| | | | | | | | | | | | This function can be more easily tested if it is in the uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: Add gpio_get_function() and friendsSimon Glass2014-10-23-0/+47
| | | | | | | | | | | | Add helpers to the uclass to allow finding out the pin function. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: gpio: Implement GPIO reservation in the uclassSimon Glass2014-10-23-14/+78
| | | | | | | | | | | | | | | | | | | | | | | | We have several GPIO drivers now and all are doing similar things to record which GPIOs are reserved. Move this logic into the uclass to make the drivers similar. We retain the request()/free() methods since currently one driver does use these for setting up the pin. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: omap: gpio: Support driver modelSimon Glass2014-10-23-0/+221
| | | | | | | | | | | | | | | | | | | | | | | | Add driver model support to this driver, while retaining support for the legacy system. Driver model GPIO support is enabled with CONFIG_DM_GPIO as usual. Since gpio_is_valid() no longer exists, we can use the -EINVAL error returned from gpio_request(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
| * dm: omap: gpio: Put _get_gpio_value() logic into its own functionSimon Glass2014-10-23-36/+42
| | | | | | | | | | | | | | | | | | | | | | | | Add a separate internal helper function to get a GPIO value, so that we will be able to call it with the driver model version and avoid code duplication. Also move gpio_get_bank() and check_gpio() down below the helper functions as these won't be needed with driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
| * dm: gpio: Support numbered GPIOsSimon Glass2014-10-23-12/+25
| | | | | | | | | | | | | | | | | | | | | | | | At present banks must be named and it is not possible to refer to GPIOs by number in driver model. Some boards use numbering - e.g. OMAP. It is fairly easy to support by detecting the absense of a bank name (which starts with a letter). Add support for numbered GPIOs in addition to the existing bank support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* | gpio: make local functions staticJeroen Hofstee2014-10-25-2/+2
|/ | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2014-10-23-0/+3
|\
| * tegra: gpio: fix null label regressionMarcel Ziswiler2014-10-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix Tegra GPIO driver to not crash resp. misbehave upon requesting GPIOs with an empty aka NULL label. As the driver uses exclusively the label to check for reservation status actually supplying one is mandatory! This fixes a regression introduced by commit: 2fccd2d96badcdf6165658a99771a4c475586279 tegra: Convert tegra GPIO driver to use driver model Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese2014-10-23-1/+1
| | | | | | | | | | | | | | | | | | This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* | dm: rpi: Convert GPIO driver to driver modelSimon Glass2014-10-22-23/+157
| | | | | | | | | | | | | | | | | | Convert the BCM2835 GPIO driver to use driver model, and switch over Raspberry Pi to use this, since it is the only board. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | dm: imx: gpio: Support driver model in MXC gpio driverSimon Glass2014-10-22-1/+303
| | | | | | | | | | | | | | | | | | | | Add driver model support with this driver. In this case the platform data is in the driver. It would be better to put this into an SOC-specific file, but this is best attempted when more boards are moved over to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | dm: exynos: gpio: Convert to driver modelSimon Glass2014-10-22-136/+288
| | | | | | | | | | | | | | Convert the exynos GPIO driver to driver model. This implements the generic GPIO interface but not the extra Exynos-specific functions. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: exynos: Tidy up GPIO definesSimon Glass2014-10-22-10/+11
| | | | | | | | | | | | | | | | | | The defines at the top of the GPIO driver use single-character names for parameters which are not very descriptive. Improve these to use descriptive parameter names. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: exynos: Tidy up GPIO headersSimon Glass2014-10-22-2/+1
|/ | | | | | | | | The wrong header is being included, thus requiring the code to re-declare the generic GPIO interface in each GPIO header. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-24-0/+0
| | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-05 18:53:10 +0000