summaryrefslogtreecommitdiff
path: root/drivers/dfu
Commit message (Collapse)AuthorAgeLines
* dfu: dfu_sf: Pass duplicate devstr to parse_devVignesh R2015-11-03-1/+3
| | | | | | | | | | | parse_dev() alters the string pointed by devstr parameter. Due to this subsequent parsing of sf entities will fail, as string pointed by devstr is no longer valid sf dev arguments. Fix this by passing pointer to the copy of the string to parse_dev instead of pointer to the actual devstr. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* dfu: dfu_sf: Take the start address into accountFabio Estevam2015-10-19-2/+10
| | | | | | | | | | | | | | | | | | | | The dfu_alt_info_spl variable allows passing a starting point for the binary to be flashed in the SPI NOR. For example, if we have 'dfu_alt_info_spl=spl raw 0x400', this means that we want to flash the binary starting at address 0x400. In order to do so we need to erase the entire sector and write to the the subsequent SPI NOR sectors taking such start address into account for the address calculations. Tested by succesfully writing SPL binary into 0x400 offset and the u-boot.img at offset 64 kiB of a SPL NOR. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Use lldiv for the math] Signed-off-by: Tom Rini <trini@konsulko.com>
* dfu: dfu_sf: Use the erase sector size for erase operationsFabio Estevam2015-10-19-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI NOR flashes need to erase the entire sector size and we cannot pass any arbitrary length for the erase operation. To illustrate the problem: Copying data from PC to DFU device Download [=========================] 100% 478208 bytes Download done. state(7) = dfuMANIFEST, status(0) = No error condition is present state(10) = dfuERROR, status(14) = Something went wrong, but the device does not know what it was Done! In this case, the binary has 478208 bytes and the M25P32 SPI NOR has an erase sector of 64kB. 478208 = 7 entire sectors of 64kiB + 19456 bytes. Erasing the first seven 64 kB sectors works fine, but when trying to erase the remainding 19456 causes problem and the board hangs. Fix the issue by always erasing with the erase sector size. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: buffer file reads tooStephen Warren2015-09-11-12/+26
| | | | | | | | | | | | | | | | | | | | When writing to files in a filesystem on MMC, dfu_mmc.c buffers up the entire file content until the end of the transaction, at which point the file is written in one go. This allows writing files larger than the USB transfer size (CONFIG_SYS_DFU_DATA_BUF_SIZE); the maximum written file size is CONFIG_SYS_DFU_MAX_FILE_SIZE (the size of the temporary buffer). The current file reading code does not do any buffering, and so limits the maximum read file size to the USB transfer size. Enhance the code to do the same kind of buffering as the write path, so the same file size limits apply. Remove the size checking code from dfu_read() since all read paths now support larger files than the USB transfer buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: don't keep freeing/reallocatingStephen Warren2015-09-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU currently allocates buffer memory at the start of each data transfer operation and frees it at the end. Especially since memalign() is used to allocate the buffer, and various other allocations happen during the transfer, this can expose the code to heap fragmentation, which prevents the allocation from succeeding on subsequent transfers. Fix the code to allocate the buffer once when DFU mode is initialized, and free the buffer once when DFU mode is exited, to reduce the exposure to heap fragmentation. The failure mode is: // Internally to memalign(), this allocates a lot more than s to guarantee // that alignment can occur, then returns chunks of memory at the start/ // end of the allocated buffer to the heap. p = memalign(a, s); // Various other malloc()s occur here, some of which allocate the RAM // immediately before/after "p". // // DFU transfer is complete, so buffer is released. free(p); // By chance, no other malloc()/free() here, in DFU at least. // // A new DFU transfer starts, so the buffer is allocated again. // In theory this should succeed since we just free()d a buffer of the // same size. However, this fails because memalign() internally attempts // to allocate much more than "s", yet free(p) above only free()d a // little more than "s". p = memalign(a, s); Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp featureLukasz Majewski2015-09-07-0/+10
| | | | | | | | The dfu tftp feature can be now enabled via Kconfig. This commit provides necessary code for it. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dfu: tftp: update: Add dfu_write_from_mem_addr() functionLukasz Majewski2015-09-07-0/+37
| | | | | | | | | | | This function allows writing via DFU data stored from fixed buffer address (like e.g. loadaddr env variable). Such predefined buffers are used in the update_tftp() code. In fact this function is a wrapper on the dfu_write() and dfu_flush(). Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dfu: tftp: update: Provide tftp support for the DFU subsystemLukasz Majewski2015-09-07-0/+66
| | | | | | | | This commit adds initial support for using tftp for downloading and upgrading firmware on the device. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* dfu: Delete superfluous initialization of the dfu_buf_size static variableLukasz Majewski2015-09-07-1/+1
| | | | | | | | | | | | After extension of the dfu_get_buf() to also setup (implicitly) the dfu_buf_size variable it is not needed to set dfu_buf_size to CONFIG_SYS_DFU_DATA_BUF_SIZE. This variable is set in the dfu_get_buf() by not only considering CONFIG_SYS_DFU_DATA_BUF but more importantly the "dfu_bufsiz" env variable. Therefore, dfu_get_buf() should be used for initialization. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dfu: fix 64-bit compile warningsStephen Warren2015-07-27-3/+3
| | | | | | | | | | | Use %p to print pointers. The max value of (i_buf - i_buf_start) should be dfu_buf_size, which is an unsigned long, so cast the pointer difference to that type to print. Change-Id: Iee242df9f8eb091aecfe0cea4c282b28b547acfe Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* usb: USB download gadget and functions config options coherent namingPaul Kocialkowski2015-07-22-1/+1
| | | | | | | | | | | | This introduces a coherent scheme for naming USB download gadget and functions config options. The download USB gadget config option is moved to CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each function's config option is moved to a CONFIG_USB_FUNCTION_ prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
* dfu: nand: Verify writesPeter Tyser2015-03-30-1/+1
| | | | | | | | | | Previously NAND writes were not verified and could fail silently. Add a verification step after all writes to NAND. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: mmc: file buffer: remove static allocationPrzemyslaw Marczak2015-03-09-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For writing files, DFU implementation requires the file buffer with the len at least of file size. For big files it requires the same big buffer. Previously the file buffer was allocated as a static variable, so it was a part of U-Boot .bss section. For 32MiB len of buffer we have 32MiB of additional space, required for this section. The .bss needs to be cleared after the relocation. This introduces an additional boot delay at every start, but usually the dfu feature is not required at the standard boot, so the buffer should be allocated only if required. This patch removes the static allocation of this buffer, and alloc it with memalign after first call of function: - dfu_fill_entity_mmc() and the buffer is freed on dfu_free_entity() call. This was tested on Trats2. A quick test with trace. Boot time from start to main_loop() entry: - ~888ms - before this change (arch memset enabled for .bss clear) - ~464ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Marek Vasut <marek.vasut@gmail.com>
* dfu: samsung: move call to set_dfu_alt_info() to dfu common codePrzemyslaw Marczak2015-02-25-0/+3
| | | | | | | | | | | | | | This common call can be used for setting proper entities based on dfu command arguments. The config: CONFIG_SET_DFU_ALT_INFO, was used only for few configs, and now it is common. The board file should implement: - set_dfu_alt_info() function Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [Test HW: Odroid U3 (Exynos 4412)]
* dfu: dfu_get_buf: check the value of env dfu_bufsiz before usePrzemyslaw Marczak2014-12-18-2/+6
| | | | | | | | | | | | | | | | | | | In function dfu_get_buf(), the size of allocated buffer could be defined by the env variable. The size from this variable was passed for memalign() without checking its value. And the the memalign will return non null pointer for size 0. This could possibly cause data abort, so now the value of var is checked before use. And if this variable is set to 0 then the default size will be used. This commit also changes the base passed to simple_strtoul() to 0. Now decimal and hex values can be used for the variable dfu_bufsiz. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* dfu: mmc: check if mmc device exists in mmc_block_op()Przemyslaw Marczak2014-12-18-1/+7
| | | | | | | | | | | The function mmc_block_op() is the last function before the physicall data write, but the mmc device pointer is not checked. If mmc device not exists, then data abort will occur. To avoid this, first the mmc device pointer is checked. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* usb, g_dnl: generalize DFU detach functionsRob Herring2014-12-18-16/+0
| | | | | | | | | In order to add detach functions for fastboot, make the DFU detach related functions common so they can be shared. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-11-2/+27
|\ | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * dfu: thor: fix: Modify dfu_get_alt() function to support absolute pathsLukasz Majewski2014-11-14-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently the ext4 file system imposed passing absolute path with its file name parameter. As a result dfu_alt_info env variable has been modified to provide absolute path when ext4 file system is accessed (e.g. /uImage ext4 0 2;). Unfortunately, lthor flashing program provides plain file name (like uImage) and hence those two file names do not match anymore. Presented commit also allows lthor to write files to sub directories (like /boot/bin/uImage). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-23-1/+1
|/ | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* dm: Add spi.h header to a few filesSimon Glass2014-10-22-0/+1
| | | | | | | | Some files are using SPI functions but not explitly including the SPI header file. Fix this, since driver model needs it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-24-0/+0
| | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* dfu: Provide means to find difference between dfu-util -e and -RLukasz Majewski2014-09-02-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit provides distinction between DFU device detach and reset. The -R behavior is preserved with proper handling of the dfu-util's -e switch, which detach the DFU device. By running dfu-util -e; one can force device to finish the execution of dfu command on target and execute some other scripted commands. Moreover, some naming has been changed - the dfu_reset() method now is known as dfu_detach(). New name better reflects the purpose of the code. It was also necessary to increase the number of usb_gadget_handle_interrupts() calls since we also must wait for detection of the USB reset event. Example usage: 1. -e (detach) switch dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e access to u-boot prompt. 2. -R (reset) switch dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage target board reset Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dfu: fix readback buffer overflow testStephen Warren2014-08-09-1/+1
| | | | | | | The buffer is too small if it's < size to read, not if it's <= the size. This fixes the 1MB test case on Tegra, which has a 1MB buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add SF backendStephen Warren2014-08-09-0/+143
| | | | | | This allows SPI Flash to be programmed using DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add free_entity() to struct dfu_entityStephen Warren2014-08-09-0/+3
| | | | | | | | This allows the backend to free any resources allocated during the relevant dfu_fill_entity_*() call. This will soon be used by the SF backend. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: allow backend to specify a maximum buffer sizeStephen Warren2014-08-09-5/+8
| | | | | | | | | | | | CONFIG_SYS_DFU_DATA_BUF_SIZE may be large to allow for FAT/ext layouts to transfer large files. However, this means that individual write operations will take a long time. Allow backends to specify a maximum buffer size, so that each write operation is limited to a smaller data block. This prevents the DFU protocol from timing out when e.g. writing to SPI flash. I would guess that NAND might benefit from setting this value too, but I can't test that. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: defer parsing of device string to IO backendStephen Warren2014-08-09-21/+24
| | | | | | | | | | | | | | Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add write error handlingStephen Warren2014-08-09-18/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix calls to dfu_write() and dfu_flush() to detect errors in the I/O itself. This could happen due to problems with the storage medium, or simply when trying to write a FAT/ext file that is larger than the buffer dfu_mmc.c maintains for this purpose. Signal the error by switching the DFU state/status. This will be picked up by the DFU client when it sends the next DFU request. Note that errors can't simply be returned from e.g. dnload_request_complete(), since that function has no way to pass errors back to the DFU client; a call to dnload_request_complete() simply means that a USB OUT completed. This error state/status needs to be cleared when the next DFU client connects. While there is a DFU_CLRSTATUS request, no DFU client seems to send this. Hence, clear this when selecting the USB alternate setting on the USB interface. Finally, dfu.c relies on a call to dfu_flush() to clear up the internal state of the write transaction. Now that errors in dfu_write() are detected, dfu_flush() may no longer be called for every transaction. Separate out the cleanup code into a new function, and call it whenever dfu_write() fails, as well as from any call to dfu_flush(). Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: fix some issues with reads/uploadsStephen Warren2014-08-09-21/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU read support appears to rely upon dfu->read_medium() updating the passed-by-reference len parameter to indicate the remaining size available for reading. dfu_read_medium_mmc() never does this, and the implementation of dfu_read_medium_nand() will only work if called just once; it hard-codes the value to the total size of the NAND device irrespective of read offset. I believe that overloading dfu->read_medium() is confusing. As such, this patch introduces a new function dfu->get_medium_size() which can be used to explicitly find out the medium size, and nothing else. dfu_read() is modified to use this function to set the initial value for dfu->r_left, rather than attempting to use the side-effects of dfu->read_medium() for this purpose. Due to this change, dfu_read() must initially set dfu->b_left to 0, since no data has been read. dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left when simply copying data from dfu->i_buf_start to the upload request buffer. r_left represents the amount of data left to be read from HW. That value is not affected by the memcpy(), but only by calls to dfu->read_medium(). After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this change, attempting to do that would result in DFU read returning no data at all due to r_left never being set. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: Disable default calculation of CRC32Lukasz Majewski2014-06-11-13/+7
| | | | | | | | | | | | | | Patch (SHA1: bd694244db7bc969954) dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting already introduced more generic handling of the crc32 calculation. Up till now the CRC32 of received data was calculated unconditionally. This patch changes this and from now - by default the crc32 is NOT calculated anymore. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: Introduction of the "dfu_hash_algo" env variable for checksum method ↵Lukasz Majewski2014-06-01-5/+47
| | | | | | | | | | | | | | | | | | | | | | | setting Up till now the CRC32 of received data was calculated unconditionally. The standard crc32 implementation causes long delay when large images were uploaded. The "dfu_hash_algo" environment variable gives the opportunity to disable on demand the hash (crc32) calculation. It can be done without the need to recompile the u-boot binary. By default the crc32 is calculated, which means that legacy behavior has been preserved. Tests results: 400 MiB ums.img file With crc32 calculation: 65 sec [avg 6.29 MB/s] Without crc32 calculation: 25 sec [avg 16.17 MB/s] Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: mmc: Provide support for eMMC boot partition accessLukasz Majewski2014-05-15-0/+46
| | | | | | | | | | | | | | Before this patch it was only possible to access the default eMMC HW partition. By partition selection I mean the access to eMMC via the ext_csd[179] register programming. It sometimes happens that it is necessary to write to other partitions. This patch adds extra attribute to "raw" sub type of the dfu_alt_info environment variable (e.g. boot-mmc.bin raw 0x0 0x200 mmcpart 1;) It saves the original boot value and restores it after storing the file. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* drivers:dfu: dfu_flush(): add raw data flush to complete dfu writePrzemyslaw Marczak2014-05-15-0/+4
| | | | | | | | | | | | | | | | | | Before dfu write and flush operations separation, dfu write data was flushed by host download request with len of zero size. Since above change manually calling dfu write with zero size has non sense (e.g. in THOR). This should be done by flush operation. So now dfu_write_buffer_drain() is called in dfu_flush(). If there is any raw data to flush (like it can be in thor) then it will be physically written to medium. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de>
* dfu, nand: add medium specific polltimeout functionHeiko Schocher2014-05-08-0/+13
| | | | | | | | | | | | | | | | | | add a possibility to add a medium specific polltimeout function. So it is possible to define different poll timeouts. Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT only on nand ubi partitions, which is currently the only usecase. Change-Id: If1db5f49b32d93fefa7481e8dfe5b7ccc0e65af4 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: change offset base handlingMateusz Zalega2014-05-05-2/+6
| | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: raw data write fixMateusz Zalega2014-05-05-40/+65
| | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu:fix: Replace wrong return value with proper oneLukasz Majewski2014-04-30-1/+1
| | | | | | | This patch remove always false (since we tested ret = 0) ternary operator with ret value returned. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-27/+46
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * dfu: mmc: Replace calls to u-boot commands with native mmc APIŁukasz Majewski2014-03-23-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | For some time we have been using the run_command() with properly crafted string. Such approach turned to be unreliable and error prone. Switch to "native" mmc subsystem API would allow better type checking and shall improve speed. Also, it seems that this API is changing less often than u-boot commands. The approach similar to env operations on the eMMC has been reused. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: dfu: introduce dfuMANIFEST stateHeiko Schocher2014-03-23-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on nand flash using ubi, after the download of the new image into the flash, the "rest" of the nand sectors get erased while flushing the medium. With current u-boot version dfu-util may show: Starting download: [##################################################] finished! state(7) = dfuMANIFEST, status(0) = No error condition is present unable to read DFU status as get_status is not answered while erasing sectors, if erasing needs some time. So do the following changes to prevent this: - introduce dfuManifest state According to dfu specification ( http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ) section 7: "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation of the status report by the host. Upon receipt of the anticipated DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it completes its reprogramming operations." - when stepping into dfuManifest state, sending a PollTimeout DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host (dfu-util) waits the PollTimeout before sending a get_status again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
| * usb, dfu: extract flush code into seperate functionHeiko Schocher2014-03-23-18/+24
| | | | | | | | | | | | | | | | | | | | | | move the flushing code into an extra function dfu_flush(), so it can be used from other code. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* | usb: dfu: add static alt num count in dfu_config_entities()Przemyslaw Marczak2014-03-13-1/+5
|/ | | | | | | | | | | | Thanks to this multiple call of function dfu_config_entities() gives continuous dfu alt numbering until call dfu_free_entities(). This allows to store dfu entities in multiple variables. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Łukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: fs: Fix format accepted by ext4write commandLukasz Majewski2014-02-20-4/+3
| | | | | | | | | | | | | | The commit: "EXT4: Fix number base handling of "ext4write" command" SHA1: f7740f7712b8638f08b83a7e5d00bc1d6bb086a9 Cleaned up the ext4write command format. This commit shall be regarded as a follow up, since the DFU subsystem is using those commands for its normal operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: Export allocated dfu buffer sizeLukasz Majewski2013-12-18-0/+5
| | | | | | | The method for exporting size of allocated buffer is provided. It is afterwards used by USB's dfu function code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: make nand upload workingBo Shen2013-11-08-0/+1
| | | | | | | | | | | Nowhere pass a value to len, which always 0, make no transfer which cause uploading failed. This patch make nand upload working. However it needs enough malloc buffer to store read data, that means the buffer at least equal to the upload partition size, or else it doesn't work. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb: dfu: correct dfu buffer inited valueBo Shen2013-11-08-1/+1
| | | | | | | | | After dfu buffer is initialized, the buffer should be all available, while not 0. Initialize its value to min(dfu_buf_size, dfu->r_left). Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: decrease dfu->r_left along with the transferBo Shen2013-11-08-0/+1
| | | | | | The value of dfu->r_left need decrease along with the transfer Signed-off-by: Bo Shen <voice.shen@atmel.com>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-23/+4
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dfu:core: Export dfu_{get|free}_buf functionsLukasz Majewski2013-10-20-2/+2
| | | | | | | | Define the dfu_get_buf() and dfu_free_buf() as global functions. They are necessary for zero copy buffer management, when DFU backend is used for storing data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
generated by cgit v1.1 at 2024-11-10 02:21:41 +0000