summaryrefslogtreecommitdiff
path: root/drivers/dfu
Commit message (Collapse)AuthorAgeLines
* dfu: Disable default calculation of CRC32Lukasz Majewski2014-06-11-13/+7
| | | | | | | | | | | | | | Patch (SHA1: bd694244db7bc969954) dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting already introduced more generic handling of the crc32 calculation. Up till now the CRC32 of received data was calculated unconditionally. This patch changes this and from now - by default the crc32 is NOT calculated anymore. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: Introduction of the "dfu_hash_algo" env variable for checksum method ↵Lukasz Majewski2014-06-01-5/+47
| | | | | | | | | | | | | | | | | | | | | | | setting Up till now the CRC32 of received data was calculated unconditionally. The standard crc32 implementation causes long delay when large images were uploaded. The "dfu_hash_algo" environment variable gives the opportunity to disable on demand the hash (crc32) calculation. It can be done without the need to recompile the u-boot binary. By default the crc32 is calculated, which means that legacy behavior has been preserved. Tests results: 400 MiB ums.img file With crc32 calculation: 65 sec [avg 6.29 MB/s] Without crc32 calculation: 25 sec [avg 16.17 MB/s] Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: mmc: Provide support for eMMC boot partition accessLukasz Majewski2014-05-15-0/+46
| | | | | | | | | | | | | | Before this patch it was only possible to access the default eMMC HW partition. By partition selection I mean the access to eMMC via the ext_csd[179] register programming. It sometimes happens that it is necessary to write to other partitions. This patch adds extra attribute to "raw" sub type of the dfu_alt_info environment variable (e.g. boot-mmc.bin raw 0x0 0x200 mmcpart 1;) It saves the original boot value and restores it after storing the file. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* drivers:dfu: dfu_flush(): add raw data flush to complete dfu writePrzemyslaw Marczak2014-05-15-0/+4
| | | | | | | | | | | | | | | | | | Before dfu write and flush operations separation, dfu write data was flushed by host download request with len of zero size. Since above change manually calling dfu write with zero size has non sense (e.g. in THOR). This should be done by flush operation. So now dfu_write_buffer_drain() is called in dfu_flush(). If there is any raw data to flush (like it can be in thor) then it will be physically written to medium. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de>
* dfu, nand: add medium specific polltimeout functionHeiko Schocher2014-05-08-0/+13
| | | | | | | | | | | | | | | | | | add a possibility to add a medium specific polltimeout function. So it is possible to define different poll timeouts. Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT only on nand ubi partitions, which is currently the only usecase. Change-Id: If1db5f49b32d93fefa7481e8dfe5b7ccc0e65af4 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: change offset base handlingMateusz Zalega2014-05-05-2/+6
| | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: raw data write fixMateusz Zalega2014-05-05-40/+65
| | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu:fix: Replace wrong return value with proper oneLukasz Majewski2014-04-30-1/+1
| | | | | | | This patch remove always false (since we tested ret = 0) ternary operator with ret value returned. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-27/+46
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * dfu: mmc: Replace calls to u-boot commands with native mmc APIŁukasz Majewski2014-03-23-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | For some time we have been using the run_command() with properly crafted string. Such approach turned to be unreliable and error prone. Switch to "native" mmc subsystem API would allow better type checking and shall improve speed. Also, it seems that this API is changing less often than u-boot commands. The approach similar to env operations on the eMMC has been reused. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: dfu: introduce dfuMANIFEST stateHeiko Schocher2014-03-23-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on nand flash using ubi, after the download of the new image into the flash, the "rest" of the nand sectors get erased while flushing the medium. With current u-boot version dfu-util may show: Starting download: [##################################################] finished! state(7) = dfuMANIFEST, status(0) = No error condition is present unable to read DFU status as get_status is not answered while erasing sectors, if erasing needs some time. So do the following changes to prevent this: - introduce dfuManifest state According to dfu specification ( http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ) section 7: "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation of the status report by the host. Upon receipt of the anticipated DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it completes its reprogramming operations." - when stepping into dfuManifest state, sending a PollTimeout DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host (dfu-util) waits the PollTimeout before sending a get_status again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
| * usb, dfu: extract flush code into seperate functionHeiko Schocher2014-03-23-18/+24
| | | | | | | | | | | | | | | | | | | | | | move the flushing code into an extra function dfu_flush(), so it can be used from other code. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* | usb: dfu: add static alt num count in dfu_config_entities()Przemyslaw Marczak2014-03-13-1/+5
|/ | | | | | | | | | | | Thanks to this multiple call of function dfu_config_entities() gives continuous dfu alt numbering until call dfu_free_entities(). This allows to store dfu entities in multiple variables. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Łukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: fs: Fix format accepted by ext4write commandLukasz Majewski2014-02-20-4/+3
| | | | | | | | | | | | | | The commit: "EXT4: Fix number base handling of "ext4write" command" SHA1: f7740f7712b8638f08b83a7e5d00bc1d6bb086a9 Cleaned up the ext4write command format. This commit shall be regarded as a follow up, since the DFU subsystem is using those commands for its normal operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: Export allocated dfu buffer sizeLukasz Majewski2013-12-18-0/+5
| | | | | | | The method for exporting size of allocated buffer is provided. It is afterwards used by USB's dfu function code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: make nand upload workingBo Shen2013-11-08-0/+1
| | | | | | | | | | | Nowhere pass a value to len, which always 0, make no transfer which cause uploading failed. This patch make nand upload working. However it needs enough malloc buffer to store read data, that means the buffer at least equal to the upload partition size, or else it doesn't work. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb: dfu: correct dfu buffer inited valueBo Shen2013-11-08-1/+1
| | | | | | | | | After dfu buffer is initialized, the buffer should be all available, while not 0. Initialize its value to min(dfu_buf_size, dfu->r_left). Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: decrease dfu->r_left along with the transferBo Shen2013-11-08-0/+1
| | | | | | The value of dfu->r_left need decrease along with the transfer Signed-off-by: Bo Shen <voice.shen@atmel.com>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-31-23/+4
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dfu:core: Export dfu_{get|free}_buf functionsLukasz Majewski2013-10-20-2/+2
| | | | | | | | Define the dfu_get_buf() and dfu_free_buf() as global functions. They are necessary for zero copy buffer management, when DFU backend is used for storing data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu:core: Find DFU alt setting number by passing its nameLukasz Majewski2013-10-20-0/+12
| | | | | | | New function - dfu_get_alt() - has been added to dfu core. If present, it returns alt setting's number corresponding to passed name. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: new board-specific USB init interfaceMateusz Zalega2013-10-20-1/+1
| | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* dfu: ram supportAfzal Mohammed2013-09-24-2/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Gerhard Sittig <gsi@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: unify mmc/nand read/write ops enumAfzal Mohammed2013-09-24-13/+3
| | | | | | | | | | | | | | | MMC and NAND independently defines same enumerators for read/write. Unify them by defining enum in dfu header. RAM support that is being added newly also can make use of it. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: Extract common DFU code to handle "dfu_alt_info" environment variableLukasz Majewski2013-09-24-0/+23
| | | | | | | | | | | New dfu_init_env_entities() function has been extracted from cmd_dfu.c and stored at dfu core. This is a dfu centric code, so it shall be processed in the core. Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de>
* dfu:cosmetic: Fix printf text for buffer overflow conditionLukasz Majewski2013-09-24-2/+2
| | | | | | | Correct error message if overflow is detected. Change-Id: I8a915c7353d49822c046fbc36241237b370e6c98 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu, nand, ubi: add partubi alt settings for updating ubi partitionHeiko Schocher2013-08-26-2/+36
| | | | | | | | | | | | | | | | | | | | updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com>
* dfu: Implementation of target reset after communication with dfu-util's -R ↵Lukasz Majewski2013-07-29-0/+11
| | | | | | | | | | | | | | switch This patch extends dfu code to support transmission with -R switch specified at dfu-util. When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after successful data transmission. Then dfu resources are released and reset command is issued. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-56/+4
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* dfu:ext4:fix Fix DFU upload functionalityŁukasz Majewski2013-07-03-4/+5
| | | | | | | | | | | | | | | For the first eMMC read of data for upload, use the "large" dfu_buf (now configurable) instead of usb request buffer allocated at composite layer (which is 4KiB) [*]. For eMMC the whole file is read, which usually is larger than the buffer [*] provided with usb request. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
* dfu:ext4:fix Fix ext4{read|write} command formattingŁukasz Majewski2013-07-03-0/+2
| | | | | | | | | | | | | | | | | | In the following commit: "dfu: Support larger than memory transfers." SHA1: ea2453d56b8860dbd18a3c517531ffc8dcb5c839 The ext4{read|write} command formatting has been changed. It removed a write mandatory [sizebytes] parameter. It extents DFU_FS_EXT4 case at mmc_file_op to provide mandatory parameter for DFU write. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-07-03-8/+41
|\
| * dfu: make data buffer size configurableHeiko Schocher2013-06-30-8/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer configurable through environment variable "dfu_bufsiz". Defaut value is configurable through CONFIG_SYS_DFU_DATA_BUF_SIZE Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Tom Rini <trini@ti.com>
* | dfu, nand: before write a buffer to nand, erase the nand sectorsHeiko Schocher2013-06-24-2/+16
|/ | | | | | | | | | | | | | | | | | | | | | before writing the received buffer to nand, erase the nand sectors. If not doing this, nand write fails. See for more info here: http://lists.denx.de/pipermail/u-boot/2013-June/156361.html Using the nand erase option "spread", maybe overwrite blocks on, for example another mtd partition, if the erasing range contains bad blocks. So a limit option is added to nand_erase_opts() Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* dfu: NAND specific routines for DFU operationPantelis Antoniou2013-04-10-0/+196
| | | | | | | | Support for NAND storage devices to work with the DFU framework. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Scott Wood <scottwood@freescale.com>
* dfu: Support larger than memory transfers.Pantelis Antoniou2013-04-10-89/+262
| | | | | | | | | | | | | | | | | | | Previously we didn't support upload/download larger than available memory. This is pretty bad when you have to update your root filesystem for example. This patch removes that limitation (and the crashes when you transfered any file larger than 4MB) by making raw image writes be done in chunks and making file maximum size be configurable. The sequence number is a 16 bit counter; make sure we handle rollover correctly. This fixes the wrong transfers for large (> 256MB) images. Also utilize a variable to handle initialization, so that we don't rely on just the counter sent by the host. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
* dfu:ext4:fix: Change ext4write command order of parametersŁukasz Majewski2013-04-08-2/+2
| | | | | | | | | | | | | | Following commit: "cmd_ext4: BREAK and correct ext4write parameter order" SHA1:0171d52c410cbaa9290b1b214e695697c835bfe5 introduced cleanup of ext4write semantics to be consistent with other filesystem's writing commands (e.g. fatwrite). This commit provides correct ext4write command generation at DFU eMMC code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* dfu: Add a partition type targetPantelis Antoniou2013-03-16-0/+31
| | | | | | | Dealing with raw block numbers with the dfu is very annoying. Introduce a partition method. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* dfu:usb:fix: Read the "filesize" environment variable only when file readŁukasz Majewski2012-09-21-1/+1
| | | | | | | | | The "filesize" environment variable shall be read only when relevant file is read. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dfu:usb: Support for ext4Łukasz Majewski2012-09-21-6/+26
| | | | | | | | Support for ext4 file system handling at DFU. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dfu: MMC specific routines for DFU operationLukasz Majewski2012-09-01-0/+163
| | | | | | | | Support for MMC storage devices to work with DFU framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: DFU backend implementationLukasz Majewski2012-09-01-0/+281
New, separate driver at ./drivers/dfu has been added. It allows platform and storage independent operation of DFU. It has been extended to use new MMC level of command abstraction. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-19 06:34:05 +0000