summaryrefslogtreecommitdiff
path: root/drivers/dfu/dfu_mmc.c
Commit message (Collapse)AuthorAgeLines
* dm: dfu: mmc: Support CONFIG_BLK in DFU for MMCSimon Glass2016-07-11-6/+5
| | | | | | | Update the method of accessing the block device so that it works with CONFIG_BLK enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: mmc: Use the new select_hwpart() APISimon Glass2016-05-17-4/+9
| | | | | | Avoid calling directly into the MMC code - use the new API call instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: part: Rename some partition functionsSimon Glass2016-03-14-1/+1
| | | | | | | | Rename three partition functions so that they start with part_. This makes it clear what they relate to. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-1/+1
| | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* mmc: store hwpart in the block deviceStephen Warren2016-01-13-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will allow us to have multiple block device structs each referring to the same eMMC device, yet different HW partitions. For now, there is still a single block device per eMMC device. As before, this block device always accesses whichever HW partition was most recently selected. Clients wishing to make use of multiple block devices referring to different HW partitions can simply take a copy of this block device once it points at the correct HW partition, and use each one as they wish. This feature will be used by the next patch. In the future, perhaps get_device() could be enhanced to return a dynamically allocated block device struct, to avoid the client needing to copy it in order to maintain multiple block devices. However, this would require all users to be updated to free those block device structs at some point, which is rather a large change. Most callers of mmc_switch_part() wish to permanently switch the default MMC block device's HW partition. Enhance mmc_switch_part() so that it does this. This removes the need for callers to do this. However, common/env_mmc.c needs to save and restore the current HW partition. Make it do this more explicitly. Replace use of mmc_switch_part() with mmc_select_hwpart() in order to remove duplicate code that skips the call if that HW partition is already selected. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* block: pass block dev not num to read/write/erase()Stephen Warren2016-01-13-2/+2
| | | | | | | | | | | This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* dfu: mmc: buffer file reads tooStephen Warren2015-09-11-1/+26
| | | | | | | | | | | | | | | | | | | | When writing to files in a filesystem on MMC, dfu_mmc.c buffers up the entire file content until the end of the transaction, at which point the file is written in one go. This allows writing files larger than the USB transfer size (CONFIG_SYS_DFU_DATA_BUF_SIZE); the maximum written file size is CONFIG_SYS_DFU_MAX_FILE_SIZE (the size of the temporary buffer). The current file reading code does not do any buffering, and so limits the maximum read file size to the USB transfer size. Enhance the code to do the same kind of buffering as the write path, so the same file size limits apply. Remove the size checking code from dfu_read() since all read paths now support larger files than the USB transfer buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: fix 64-bit compile warningsStephen Warren2015-07-27-1/+1
| | | | | | | | | | | Use %p to print pointers. The max value of (i_buf - i_buf_start) should be dfu_buf_size, which is an unsigned long, so cast the pointer difference to that type to print. Change-Id: Iee242df9f8eb091aecfe0cea4c282b28b547acfe Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* dfu: mmc: file buffer: remove static allocationPrzemyslaw Marczak2015-03-09-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For writing files, DFU implementation requires the file buffer with the len at least of file size. For big files it requires the same big buffer. Previously the file buffer was allocated as a static variable, so it was a part of U-Boot .bss section. For 32MiB len of buffer we have 32MiB of additional space, required for this section. The .bss needs to be cleared after the relocation. This introduces an additional boot delay at every start, but usually the dfu feature is not required at the standard boot, so the buffer should be allocated only if required. This patch removes the static allocation of this buffer, and alloc it with memalign after first call of function: - dfu_fill_entity_mmc() and the buffer is freed on dfu_free_entity() call. This was tested on Trats2. A quick test with trace. Boot time from start to main_loop() entry: - ~888ms - before this change (arch memset enabled for .bss clear) - ~464ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Marek Vasut <marek.vasut@gmail.com>
* dfu: mmc: check if mmc device exists in mmc_block_op()Przemyslaw Marczak2014-12-18-1/+7
| | | | | | | | | | | The function mmc_block_op() is the last function before the physicall data write, but the mmc device pointer is not checked. If mmc device not exists, then data abort will occur. To avoid this, first the mmc device pointer is checked. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* dfu: defer parsing of device string to IO backendStephen Warren2014-08-09-9/+12
| | | | | | | | | | | | | | Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: fix some issues with reads/uploadsStephen Warren2014-08-09-9/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU read support appears to rely upon dfu->read_medium() updating the passed-by-reference len parameter to indicate the remaining size available for reading. dfu_read_medium_mmc() never does this, and the implementation of dfu_read_medium_nand() will only work if called just once; it hard-codes the value to the total size of the NAND device irrespective of read offset. I believe that overloading dfu->read_medium() is confusing. As such, this patch introduces a new function dfu->get_medium_size() which can be used to explicitly find out the medium size, and nothing else. dfu_read() is modified to use this function to set the initial value for dfu->r_left, rather than attempting to use the side-effects of dfu->read_medium() for this purpose. Due to this change, dfu_read() must initially set dfu->b_left to 0, since no data has been read. dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left when simply copying data from dfu->i_buf_start to the upload request buffer. r_left represents the amount of data left to be read from HW. That value is not affected by the memcpy(), but only by calls to dfu->read_medium(). After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this change, attempting to do that would result in DFU read returning no data at all due to r_left never being set. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: mmc: Provide support for eMMC boot partition accessLukasz Majewski2014-05-15-0/+46
| | | | | | | | | | | | | | Before this patch it was only possible to access the default eMMC HW partition. By partition selection I mean the access to eMMC via the ext_csd[179] register programming. It sometimes happens that it is necessary to write to other partitions. This patch adds extra attribute to "raw" sub type of the dfu_alt_info environment variable (e.g. boot-mmc.bin raw 0x0 0x200 mmcpart 1;) It saves the original boot value and restores it after storing the file. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: change offset base handlingMateusz Zalega2014-05-05-2/+6
| | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: raw data write fixMateusz Zalega2014-05-05-40/+65
| | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: Replace calls to u-boot commands with native mmc APIŁukasz Majewski2014-03-23-7/+24
| | | | | | | | | | | | | For some time we have been using the run_command() with properly crafted string. Such approach turned to be unreliable and error prone. Switch to "native" mmc subsystem API would allow better type checking and shall improve speed. Also, it seems that this API is changing less often than u-boot commands. The approach similar to env operations on the eMMC has been reused. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: fs: Fix format accepted by ext4write commandLukasz Majewski2014-02-20-4/+3
| | | | | | | | | | | | | | The commit: "EXT4: Fix number base handling of "ext4write" command" SHA1: f7740f7712b8638f08b83a7e5d00bc1d6bb086a9 Cleaned up the ext4write command format. This commit shall be regarded as a follow up, since the DFU subsystem is using those commands for its normal operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: unify mmc/nand read/write ops enumAfzal Mohammed2013-09-24-7/+2
| | | | | | | | | | | | | | | MMC and NAND independently defines same enumerators for read/write. Unify them by defining enum in dfu header. RAM support that is being added newly also can make use of it. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-13/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* dfu:ext4:fix Fix ext4{read|write} command formattingŁukasz Majewski2013-07-03-0/+2
| | | | | | | | | | | | | | | | | | In the following commit: "dfu: Support larger than memory transfers." SHA1: ea2453d56b8860dbd18a3c517531ffc8dcb5c839 The ext4{read|write} command formatting has been changed. It removed a write mandatory [sizebytes] parameter. It extents DFU_FS_EXT4 case at mmc_file_op to provide mandatory parameter for DFU write. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
* dfu: Support larger than memory transfers.Pantelis Antoniou2013-04-10-36/+72
| | | | | | | | | | | | | | | | | | | Previously we didn't support upload/download larger than available memory. This is pretty bad when you have to update your root filesystem for example. This patch removes that limitation (and the crashes when you transfered any file larger than 4MB) by making raw image writes be done in chunks and making file maximum size be configurable. The sequence number is a 16 bit counter; make sure we handle rollover correctly. This fixes the wrong transfers for large (> 256MB) images. Also utilize a variable to handle initialization, so that we don't rely on just the counter sent by the host. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
* dfu:ext4:fix: Change ext4write command order of parametersŁukasz Majewski2013-04-08-2/+2
| | | | | | | | | | | | | | Following commit: "cmd_ext4: BREAK and correct ext4write parameter order" SHA1:0171d52c410cbaa9290b1b214e695697c835bfe5 introduced cleanup of ext4write semantics to be consistent with other filesystem's writing commands (e.g. fatwrite). This commit provides correct ext4write command generation at DFU eMMC code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* dfu: Add a partition type targetPantelis Antoniou2013-03-16-0/+31
| | | | | | | Dealing with raw block numbers with the dfu is very annoying. Introduce a partition method. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* dfu:usb:fix: Read the "filesize" environment variable only when file readŁukasz Majewski2012-09-21-1/+1
| | | | | | | | | The "filesize" environment variable shall be read only when relevant file is read. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dfu:usb: Support for ext4Łukasz Majewski2012-09-21-6/+26
| | | | | | | | Support for ext4 file system handling at DFU. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dfu: MMC specific routines for DFU operationLukasz Majewski2012-09-01-0/+162
Support for MMC storage devices to work with DFU framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-02 15:25:59 +0000