summaryrefslogtreecommitdiff
path: root/doc
Commit message (Collapse)AuthorAgeLines
* * Patch by Eran LibertyEran Liberty2005-07-28-0/+96
| | | | Add support for the Freescale MPC8349ADS board.
* * Patch by Jon Loeliger, 2005-05-05Jon Loeliger2005-07-25-6/+46
| | | | | | | | Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
* * Patch by Jon Loeliger, Kumar Gala 2005-02-08Jon Loeliger2005-07-23-1/+0
| | | | | | | | - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
* Auto-size RAM on canmb board.wdenk2005-04-20-6/+6
| | | | Cleanup.
* * Patch by Stefan Roese, 06 Apr 2005:stroese2005-04-07-0/+99
| | | | | | | Updates for OCOTEA board: - Changed U-Boot size from 512kByte to 256kByte - Fixed flash driver to support boot from soldered user flash - Added README for switch from PIBS firmware to U-Boot
* * Patch by Richard Klingler, 03 Apr 2005:wdenk2005-04-03-1/+26
| | | | | | | | | Add call to eth_halt() in net/net.c when called functions fail after eth_init() has been called. * Patch by Sam Song, 3 April 2005: - Update README.Netconsole - Update README
* Prepare for SoC rework of ARM code:wdenk2005-04-02-1/+1
| | | | | - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files)
* * Patch by Masami Komiya, 30 Mar 2005:wdenk2005-04-01-0/+17
| | | | | | | | add SNTP support and expand time server and time offset fields of DHCP support. See doc/README.SNTP * Patch by Steven Scholz, 13 Dec 2004: Fix bug in at91rm920 ethernet driver
* * Patches by Richard Woodruff, 01 Oct 2004:wdenk2005-01-09-0/+38
| | | | | | | | add support for the TI OMAP2420 processor and its H4 reference board * Patch by Christian Pellegrin, 24 Sep 2004: Added support for NE2000 compatible (DP8390, DP83902) NICs.
* * Patch by Leif Lindholm, 23 Sep 2004:wdenk2005-01-09-0/+17
| | | | | | | | add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
* Patch by Florian Schlote, 08 Sep 2004:wdenk2005-01-09-0/+156
| | | | Add support for SenTec-COBRA5272-board (Coldfire).
* * Clean up CMC PU2 flash driverwdenk2004-12-10-1/+4
| | | | | | * Update MAINTAINERS file * Fix bug in MPC823 LCD driver
* Patch by TsiChung Liew, 23 Sep 2004:wdenk2004-10-28-0/+482
| | | | | - add support for MPC8220 CPU - Add support for Alaska and Yukon boards
* Cleanupwdenk2004-10-11-41/+43
|
* * Patch by Gridish Shlomi, 30 Aug 2004:wdenk2004-10-10-21/+22
| | | | | | | | | | | | | | | | | - Add support to revA version of PQ27 and PQ27E. - Reverted MPC8260ADS baudrate back to original 115200 * Patch by Hojin, 17 Sep 2004: Fix typo in cfi_flash.c * Patch by Mark Jonas, 09 September 2004: mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong error message * Patch by Mark Jonas, 31 August 2004: Added option CFG_XLB_PIPELINING to enable XLB pipelining. This improves FTP performance for MPC5200 systems. Enabled for IceCube by default.
* * Patch by Michael Bendzick, 30 Aug 2004:wdenk2004-10-10-0/+55
| | | | | | | | | - Improve platform.S code for omap1510inn that detects whether code is running from SDRAM or not. Patch allows SDRAM to be configured if code is running out of SRAM at 0x20000000. * Patch by Frederick Klatt, 30 Aug 2004: Add support for the Wind River SBC8540/SBC8560 boards
* Patches by Scott McNutt, 24 Aug 2004:wdenk2004-10-10-27/+26
| | | | | | - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
* Patches by Jon Loeliger, 24 Aug 2004:wdenk2004-10-10-3/+190
| | | | | - Add support for the MPC8541 and MPC8555 CDS boards - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
* Patch by Steven Scholz, 16 Aug 2004:wdenk2004-10-09-0/+31
| | | | | | | | - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)" - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/ - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/ into cpu/arm920t/$(SOC)/
* * Patch by Yuli Barcohen, 13 Jul 2004:wdenk2004-09-28-10/+11
| | | | | | | | Allow clock setting on MPC866/MPC885 series chips according to environment variable `cpuclk' * Patch by Yuli Barcohen, 20 Apr 2004: Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
* * Patch by Detlev Zundel, 08 Sep 2004:wdenk2004-09-08-0/+21
| | | | | | | | | | | Update etags build target * Improve NetConsole support: add support for broadcast destination address and buffered input. * Cleanup compiler warnings for GCC 3.3.x and later * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
* Add support for console over UDP (compatible to Ingo Molnar'swdenk2004-08-02-0/+68
| | | | netconsole patch under Linux)
* Patch by Jon Loeliger, 16 Jul 2004:wdenk2004-08-01-458/+164
| | | | | | | | | | | | | - support larger DDR memories up to 2G on the PC8540/8560ADS and STXGP3 boards - Made MPC8540/8560ADS be 33Mhz PCI by default. - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 and CONFIG_L2_INIT_RAM options. - Refactor Local Bus initialization out of SDRAM setup. - Re-implement new version of LBC11/DDR11 errata workarounds. - Moved board specific PCI init parts out of CPU directory. - Added TLB entry for PCI-1 IO Memory - Updated README.mpc85xxads
* * Code cleanupwdenk2004-08-01-0/+37
| | | | | | | | | | | | | * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
* * Fix NSCU config; add ethernet wakeup code.wdenk2004-08-01-0/+3
| | | | * Add link for preloader for Motorola Coldfire to RAEDME.m68k
* * Patch by Fred Klatt, 25 Jun 2004:wdenk2004-07-10-0/+53
| | | | | | | | | | | | Add support for WindRiver's SBC8560 board * Patch by Nicolas Lacressonniere, 24 Jun 2004 Small Bugs fixes for "at91rm9200dk" board: - Timing modifications for SPI DataFlash access - Fix NAND flash detection bug * Patch by Nicolas Lacressonniere, 24 Jun 2004: Add Support for Flash AT49BV6416 for AT91RM9200DK board
* Patch by Jon Loeliger, 17 June 2004:wdenk2004-07-09-42/+64
| | | | | | | | Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
* * Patch by Paul Ruhland, 17 May 2004:wdenk2004-06-09-3/+1
| | | | | | | | | | | | - Add support for the Logic Zoom LH7A40x based SDK board(s), specifically the LPD7A400. * Patches by Robert Schwebel, 15 May 2004: - call MAC address reading code also for SMSC91C111; - make SMSC91C111 timeout configurable, remove duplicate code - fix get_timer() for PXA - update doc/README.JFFS2 - use "bootfile" env variable also for jffs2
* Patch by Robert Schwebel, 13 May 2004:wdenk2004-06-09-8/+15
| | | | Add 'imgextract' command: extract one part of a multi file image.
* Patches by Jon Loeliger, 11 May 2004:wdenk2004-06-09-31/+57
| | | | (partially, as they contained a lot of crap)
* * Patch by Rishi Bhattacharya, 08 May 2004:wdenk2004-06-08-23/+19
| | | | | | | Add support for TI OMAP5912 OSK Board * Patch by Sam Song May, 07 May 2004: Fix typo of UPM table for rmu board
* * Patch by Dave Peverley, 30 Apr 2004:wdenk2004-06-06-0/+95
| | | | | | | | | | | | | | Add support for OMAP730 Perseus2 Development board * Patch by Alan J. Luse, 29 Apr 2004: Fix flash chip-select (OR0) option register setting on FADS boards. * Patch by Alan J. Luse, 29 Apr 2004: Report MII network speed and duplex setting properly when auto-negotiate is not enabled. * Patch by Jarrett Redd, 29 Apr 2004: Fix hang on reset on Ocotea board due to flash in wrong mode.
* Patch by Scott McNutt, 25 Apr 2004:wdenk2004-05-19-9/+109
| | | | | | | Add Nios GDB/JTAG Console support: - Add stubs to support gdb via JTAG. - Add support for console over JTAG. - Minor cleanup.
* * Temporarily disabled John Kerl's extended MII command code becausewdenk2004-04-18-3/+6
| | | | | | | | | | | "miivals.h" is missing * Patches by Mark Jonas, 13 Apr 2004: - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S - Add sync instructions to IceCube SDRAM init code - Move SDRAM chip constants into seperate include files - Unify DDR and SDR initialization code - Unify all IceCube (Lite5xxx) target names
* * Configure PPChameleon board to use redundand environment in flashwdenk2004-04-18-0/+24
| | | | | | * Configure PPChameleon board to use JFFS2 NAND support. * Added support for JFFS2 filesystem (read-only) on top of NAND flash
* * Patch by George G. Davis, 02 Apr 2004:wdenk2004-04-15-10/+8
| | | | add support for Intel Assabet board
* * Patch by Stephen Williams, 01 Apr 2004:wdenk2004-04-15-0/+50
| | | | | | | Add support for Picture Elements JSE board * Patch by Christian Pell, 01 Apr 2004: Add CompactFlash support for PXA systems.
* Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-0/+15
| | | | add networking support for VLANs (802.1q), and CDP (Cisco Discovery Protocol)
* Release version 1.1.0wdenk2004-04-10-0/+10
|
* Code cleanup; make several boards compile & link.wdenk2004-03-14-2/+2
|
* * Patch by Stephan Linz, 09 Mar 2004wdenk2004-03-14-0/+704
| | | | | | | | | | | - Add support for the SSV ADNP/ESC1 (Nios Softcore) * Patch by George G. Davis, 9 Mar 2004: fix recent build failure for SA1100 target * Patch by Travis Sawyer, 09 Mar 2004: Support native interrupt mode for the IBM440GX. Previously it was running in 440GP compatibility mode.
* * Patch by Yuli Barcohen, 4 Mar 2004:wdenk2004-03-14-0/+73
| | | | | | | | | | | | | | | | | Fix problems with GCC 3.3.x which changed handling of global variables explicitly initialized to zero (now in .bss instead of .data as before). * Patch by Leon Kukovec, 02 Mar 2004: add strswab() to fix IDE LBA capacity, firmware and model numbers on little endian machines * Patch by Masami Komiya, 02 Mar 2004: - Remove get_ticks() from NFS code - Add verification of RPC transaction ID * Patch by Pierre Aubert, 02 Mar 2004: cleanup for IDE and USB drivers for MPC5200
* * Patch by Markus Pietrek, 24 Feb 2004:wdenk2004-02-26-0/+36
| | | | | | | | | | | | | NS9750 DevBoard added * Patch by Pierre AUBERT, 24 Feb 2004 add USB support for MPC5200 * Patch by Steven Scholz, 24 Feb 2004: - fix MII commands to use values from last command * Patch by Torsten Demke, 24 Feb 2004: Add support for the eXalion platform (SPSW-8240, F-30, F-300)
* * Patch by Peter Ryser, 20 Feb 2004:wdenk2004-02-23-0/+128
| | | | | | | | | | | | | Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file
* * Patches by Reinhard Meyer, 14 Feb 2004:wdenk2004-02-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
* * Patch by Laurent Mohin, 10 Feb 2004:wdenk2004-02-23-12/+12
| | | | | | | | | Fix buffer overflow in common/usb.c * Patch by Tolunay Orkun, 10 Feb 2004: Add support for Cogent CSB272 board * Code cleanup
* * Patch by Thomas Elste, 10 Feb 2004:wdenk2004-02-23-0/+78
| | | | | | | | | | | | | | Add support for NET+50 CPU and ModNET50 board * Patch by Sam Song, 10 Feb 2004: Fix typos in cfi_flash.c * Patch by Leon Kukovec, 10 Feb 2004 Fixed long dir entry slot id calculation in get_vfatname * Patch by Robin Gilks, 10 Feb 2004: add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=)
* * Some code cleanupwdenk2004-02-12-0/+133
| | | | | | | | * Patch by Josef Baumgartner, 10 Feb 2004: Fixes for Coldfire port * Patch by Brad Kemp, 11 Feb 2004: Fix CFI flash driver problems
* Patches by Stephan Linz, 30 Jan 2004:wdenk2004-02-09-12/+438
| | | | | | | | | | | | | | | | | | | | | | | | | 1: - board/altera/common/flash.c:flash_erase(): o allow interrupts befor get_timer() call o check-up each erased sector and avoid unexpected timeouts - board/altera/dk1c20/dk1s10.c:board_early_init_f(): o enclose sevenseg_set() in cpp condition - remove the ASMI configuration for DK1S10_standard_32 (never present) - fix some typed in mistakes in the NIOS documentation 2: - split DK1C20 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1C20.h 3: - split DK1S10 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1S10.h 4: - Add support for the Microtronix Linux Development Kit NIOS CPU configuration at the Altera Nios Development Kit, Stratix Edition (DK-1S10) 5: - Add documentation for the Altera Nios Development Kit, Stratix Edition (DK-1S10) 6: - Add support for the Nios Serial Peripharel Interface (SPI) (master only) 7: - Add support for the common U-Boot SPI framework at RTC driver DS1306
* Patch by Anders Larsen, 09 Jan 2004:wdenk2004-02-08-10/+0
| | | | | | | | | | ARM memory layout fixes: the abort-stack is now set up in the correct RAM area, and the BSS is zeroed out as it should be. Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' of the linker scripts are replaced by '__bss_start' and '_end', resp., which is a further step to eliminate unnecessary differences between the implementation of the CPU architectures.
generated by cgit v1.1 at 2024-11-07 17:25:28 +0000