summaryrefslogtreecommitdiff
path: root/doc
Commit message (Collapse)AuthorAgeLines
* * Patch by Fred Klatt, 25 Jun 2004:wdenk2004-07-10-0/+53
| | | | | | | | | | | | Add support for WindRiver's SBC8560 board * Patch by Nicolas Lacressonniere, 24 Jun 2004 Small Bugs fixes for "at91rm9200dk" board: - Timing modifications for SPI DataFlash access - Fix NAND flash detection bug * Patch by Nicolas Lacressonniere, 24 Jun 2004: Add Support for Flash AT49BV6416 for AT91RM9200DK board
* Patch by Jon Loeliger, 17 June 2004:wdenk2004-07-09-42/+64
| | | | | | | | Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
* * Patch by Paul Ruhland, 17 May 2004:wdenk2004-06-09-3/+1
| | | | | | | | | | | | - Add support for the Logic Zoom LH7A40x based SDK board(s), specifically the LPD7A400. * Patches by Robert Schwebel, 15 May 2004: - call MAC address reading code also for SMSC91C111; - make SMSC91C111 timeout configurable, remove duplicate code - fix get_timer() for PXA - update doc/README.JFFS2 - use "bootfile" env variable also for jffs2
* Patch by Robert Schwebel, 13 May 2004:wdenk2004-06-09-8/+15
| | | | Add 'imgextract' command: extract one part of a multi file image.
* Patches by Jon Loeliger, 11 May 2004:wdenk2004-06-09-31/+57
| | | | (partially, as they contained a lot of crap)
* * Patch by Rishi Bhattacharya, 08 May 2004:wdenk2004-06-08-23/+19
| | | | | | | Add support for TI OMAP5912 OSK Board * Patch by Sam Song May, 07 May 2004: Fix typo of UPM table for rmu board
* * Patch by Dave Peverley, 30 Apr 2004:wdenk2004-06-06-0/+95
| | | | | | | | | | | | | | Add support for OMAP730 Perseus2 Development board * Patch by Alan J. Luse, 29 Apr 2004: Fix flash chip-select (OR0) option register setting on FADS boards. * Patch by Alan J. Luse, 29 Apr 2004: Report MII network speed and duplex setting properly when auto-negotiate is not enabled. * Patch by Jarrett Redd, 29 Apr 2004: Fix hang on reset on Ocotea board due to flash in wrong mode.
* Patch by Scott McNutt, 25 Apr 2004:wdenk2004-05-19-9/+109
| | | | | | | Add Nios GDB/JTAG Console support: - Add stubs to support gdb via JTAG. - Add support for console over JTAG. - Minor cleanup.
* * Temporarily disabled John Kerl's extended MII command code becausewdenk2004-04-18-3/+6
| | | | | | | | | | | "miivals.h" is missing * Patches by Mark Jonas, 13 Apr 2004: - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S - Add sync instructions to IceCube SDRAM init code - Move SDRAM chip constants into seperate include files - Unify DDR and SDR initialization code - Unify all IceCube (Lite5xxx) target names
* * Configure PPChameleon board to use redundand environment in flashwdenk2004-04-18-0/+24
| | | | | | * Configure PPChameleon board to use JFFS2 NAND support. * Added support for JFFS2 filesystem (read-only) on top of NAND flash
* * Patch by George G. Davis, 02 Apr 2004:wdenk2004-04-15-10/+8
| | | | add support for Intel Assabet board
* * Patch by Stephen Williams, 01 Apr 2004:wdenk2004-04-15-0/+50
| | | | | | | Add support for Picture Elements JSE board * Patch by Christian Pell, 01 Apr 2004: Add CompactFlash support for PXA systems.
* Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-0/+15
| | | | add networking support for VLANs (802.1q), and CDP (Cisco Discovery Protocol)
* Release version 1.1.0wdenk2004-04-10-0/+10
|
* Code cleanup; make several boards compile & link.wdenk2004-03-14-2/+2
|
* * Patch by Stephan Linz, 09 Mar 2004wdenk2004-03-14-0/+704
| | | | | | | | | | | - Add support for the SSV ADNP/ESC1 (Nios Softcore) * Patch by George G. Davis, 9 Mar 2004: fix recent build failure for SA1100 target * Patch by Travis Sawyer, 09 Mar 2004: Support native interrupt mode for the IBM440GX. Previously it was running in 440GP compatibility mode.
* * Patch by Yuli Barcohen, 4 Mar 2004:wdenk2004-03-14-0/+73
| | | | | | | | | | | | | | | | | Fix problems with GCC 3.3.x which changed handling of global variables explicitly initialized to zero (now in .bss instead of .data as before). * Patch by Leon Kukovec, 02 Mar 2004: add strswab() to fix IDE LBA capacity, firmware and model numbers on little endian machines * Patch by Masami Komiya, 02 Mar 2004: - Remove get_ticks() from NFS code - Add verification of RPC transaction ID * Patch by Pierre Aubert, 02 Mar 2004: cleanup for IDE and USB drivers for MPC5200
* * Patch by Markus Pietrek, 24 Feb 2004:wdenk2004-02-26-0/+36
| | | | | | | | | | | | | NS9750 DevBoard added * Patch by Pierre AUBERT, 24 Feb 2004 add USB support for MPC5200 * Patch by Steven Scholz, 24 Feb 2004: - fix MII commands to use values from last command * Patch by Torsten Demke, 24 Feb 2004: Add support for the eXalion platform (SPSW-8240, F-30, F-300)
* * Patch by Peter Ryser, 20 Feb 2004:wdenk2004-02-23-0/+128
| | | | | | | | | | | | | Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file
* * Patches by Reinhard Meyer, 14 Feb 2004:wdenk2004-02-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
* * Patch by Laurent Mohin, 10 Feb 2004:wdenk2004-02-23-12/+12
| | | | | | | | | Fix buffer overflow in common/usb.c * Patch by Tolunay Orkun, 10 Feb 2004: Add support for Cogent CSB272 board * Code cleanup
* * Patch by Thomas Elste, 10 Feb 2004:wdenk2004-02-23-0/+78
| | | | | | | | | | | | | | Add support for NET+50 CPU and ModNET50 board * Patch by Sam Song, 10 Feb 2004: Fix typos in cfi_flash.c * Patch by Leon Kukovec, 10 Feb 2004 Fixed long dir entry slot id calculation in get_vfatname * Patch by Robin Gilks, 10 Feb 2004: add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=)
* * Some code cleanupwdenk2004-02-12-0/+133
| | | | | | | | * Patch by Josef Baumgartner, 10 Feb 2004: Fixes for Coldfire port * Patch by Brad Kemp, 11 Feb 2004: Fix CFI flash driver problems
* Patches by Stephan Linz, 30 Jan 2004:wdenk2004-02-09-12/+438
| | | | | | | | | | | | | | | | | | | | | | | | | 1: - board/altera/common/flash.c:flash_erase(): o allow interrupts befor get_timer() call o check-up each erased sector and avoid unexpected timeouts - board/altera/dk1c20/dk1s10.c:board_early_init_f(): o enclose sevenseg_set() in cpp condition - remove the ASMI configuration for DK1S10_standard_32 (never present) - fix some typed in mistakes in the NIOS documentation 2: - split DK1C20 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1C20.h 3: - split DK1S10 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1S10.h 4: - Add support for the Microtronix Linux Development Kit NIOS CPU configuration at the Altera Nios Development Kit, Stratix Edition (DK-1S10) 5: - Add documentation for the Altera Nios Development Kit, Stratix Edition (DK-1S10) 6: - Add support for the Nios Serial Peripharel Interface (SPI) (master only) 7: - Add support for the common U-Boot SPI framework at RTC driver DS1306
* Patch by Anders Larsen, 09 Jan 2004:wdenk2004-02-08-10/+0
| | | | | | | | | | ARM memory layout fixes: the abort-stack is now set up in the correct RAM area, and the BSS is zeroed out as it should be. Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' of the linker scripts are replaced by '__bss_start' and '_end', resp., which is a further step to eliminate unnecessary differences between the implementation of the CPU architectures.
* Patch by Travis Sawyer, 30 Dec 2003:wdenk2004-02-06-0/+82
| | | | | | | Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX base PrPMC board.
* * Patch by Wolter Kamphuis, 15 Dec 2003:wdenk2004-02-06-2/+0
| | | | | | made CONFIG_SILENT_CONSOLE usable on all architectures * Disable date command on TQM866M - there is no RTC on MPC866
* Fix variable CPU clock for MPC859/866 systems for low CPU clockswdenk2004-01-31-0/+4
|
* * Implement adaptive SDRAM timing configuration based on actual CPUwdenk2004-01-29-0/+19
| | | | | | | clock frequency for INCA-IP; fix problem with board hanging when switching from 150MHz to 100MHz * Add PCMCIA CS support for BMS2003 board
* * Fix problems caused by Robert Schwebel's cramfs patchwdenk2004-01-04-30/+94
| | | | | | | | | | | | * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x)
* Patches by Stephan Linz, 11 Dec 2003:wdenk2004-01-03-16/+1729
| | | | | | | | | | | | | | - more documentation for NIOS port - new struct nios_pio_t, struct nios_spi_t - Reconfiguration for NIOS Development Kit DK1C20: o move board related code from board/dk1c20 to board/altera/dk1c20 o create a new common source path board/altera/common and move generic flash access stuff into it o change/expand configuration file DK1C20.h - Add support for NIOS Development Kit DK1S10 - Add status LED support for NIOS systems - Add dual 7-segment LED support for Altera NIOS DevKits
* * Patch by Ronen Shitrit, 10 Dec 2003:wdenk2004-01-03-0/+210
| | | | | | | Add support for the Marvell DB64360 / DB64460 development boards * Patch by Detlev Zundel, 10 Dec 2003: fix dependency problem in examples/Makefile
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-06-0/+27
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* Fix PCI problems on PPChameleon boardwdenk2003-10-22-0/+4
|
* * Patch by Steven Scholz, 18 Oct 2003:wdenk2003-10-19-5/+6
| | | | | | | | | | | | | | | | | | | | | Fix AT91RM9200 ethernet driver * Patch by Nye Liu, 17 Oct 2003: Fix typo in include/mpc8xx.h * Patch by Richard Woodruff, 16 Oct 03: Fixes for cpu/arm925/interrupt.c - Initialize timestamp & lastdec vars. - fix timestamp overflows. - fix lastdec overflow. - smarter normalization to allow udelay() below 1ms to work. * Patch by Scott McNutt, 16 Oct add networking support for the Altera Nios Development Kit, Cyclone Edition (DK-1C20) * Patch by Jon Diekema, 14 Oct 2003: add hint about doc/README.silent to README file
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-15-3/+535
| | | | | | | | - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silentwdenk2003-10-10-0/+22
| | | | for more information
* * Patch by Scott McNutt, 04 Oct 2003:wdenk2003-10-08-0/+280
| | | | | | | | | | | | | | | | | | - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
* * Add support for SK98xx driverwdenk2003-09-05-3/+3
| | | | | | | | | | | | | | | * Add PCI support for SL8245 board * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) * Patch by Andreas Mohr, 4 Sep 2003: Fix a lot of spelling errors
* * Make Ethernet autonegotiation on INCA-IP work for all clock rates;wdenk2003-08-17-0/+14
| | | | | | | | | | | | | allow selection of clock frequency as "make" target * Implement memory autosizing code for IceCube boards * Configure network port on INCA-IP for autonegotiation * Fix overflow problem in network timeout code * Patch by Richard Woodruff, 8 Aug 2003: Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
* * Patch by Scott McNutt, 21 Jul 2003:wdenk2003-07-27-0/+57
| | | | | | | | | | | | | | | | | | | | Add support for LynuxWorks Kernel Downloadable Images (KDIs). Both LynxOS and BlueCat linux KDIs are supported. * Patch by Richard Woodruff, 25 Jul 2003: use more reliable reset for OMAP/925T * Patch by Nye Liu, 25 Jul 2003: fix typo in mpc8xx.h * Patch by Richard Woodruff, 24 Jul 2003: Fixes for cmd_nand.c: - Fixed null dereferece which could result in incorrect ECC values. - Added support for devices with no Ready/Busy signal hooked up. - Added OMAP1510 read/write protect handling. - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock for non-JFFS2. - Switched default ECC to be JFFS2.
* * Allow crc32 to be used at address 0x000wdenk2003-07-26-143/+83
| | | | | | | | * Provide consistent interface to standalone applications to access the 'global_data' structure Provide a doc/README.standalone more useful to users/developers. * Make IceCube MGT5100 FEC driver work
* * Implement new mechanism to export U-Boot's functions to standalonewdenk2003-07-24-0/+156
| | | | | | | | applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)
* Incorporate Patch by Lutz Dennig, 15 Jul 2003.wdenk2003-07-16-18/+22
|
* * Patches by Yuli Barcohen, 13 Jul 2003:wdenk2003-07-14-4/+4
| | | | | | | | | | | | | | | | | | - Correct flash and JFFS2 support for MPC8260ADS - fix PVR values and clock generation for PowerQUICC II family (8270/8275/8280) * Patch by Bernhard Kuhn, 08 Jul 2003: - add support for M68K targets * Patch by Ken Chou, 3 Jul: - Fix PCI config table for A3000 - Fix iobase for natsemi.c (PCI_BASE_ADDRESS_0 is the IO base register for DP83815) * Allow to enable "slow" POST routines by key press on power-on * Fix temperature dependend switching of LCD backlight on LWMON * Tweak output format for LWMON
* Patch by Kenneth Johansson, 30 Jun 2003:wdenk2003-07-01-103/+31
| | | | get rid of MK_CMD_ENTRY macro; update doc/README.command
* * Code cleanup:wdenk2003-06-27-140/+113
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* * Patch by Marc Singer, 29 May 2003:wdenk2003-05-31-11/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
* * Patch by David Updegraff, 22 Apr 2003:wdenk2003-05-20-4/+4
| | | | | | | | | | | | | update for CrayL1 board * Patch by Pantelis Antoniou, 21 Apr 2003: add boot support for ARTOS (a proprietary OS) * Patch by Steven Scholz, 11 Apr 2003: Add support for RTC DS1338 * Patch by Rod Boyce, 24 Jan 2003: Fix counting of extended partitions in diskboot command
* Patch by Mathijs Haarman, 08 May 2003:wdenk2003-05-12-7/+17
| | | | Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
generated by cgit v1.1 at 2024-12-18 01:47:13 +0000